Initial commit; kernel source import

sound/soc/samsung/Kconfig

@@ -0,0 +1,224 @@
+config SND_SOC_SAMSUNG
+	tristate "ASoC support for Samsung"
+	depends on PLAT_SAMSUNG
+	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C2410_DMA if ARCH_S3C24XX
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Samsung SoCs' Audio interfaces. You will also need to
+	  select the audio interfaces to support below.
+
+config SND_S3C24XX_I2S
+	tristate
+	select S3C2410_DMA
+
+config SND_S3C_I2SV2_SOC
+	tristate
+
+config SND_S3C2412_SOC_I2S
+	tristate
+	select SND_S3C_I2SV2_SOC
+	select S3C2410_DMA
+
+config SND_SAMSUNG_PCM
+	tristate
+
+config SND_SAMSUNG_AC97
+	tristate
+	select SND_SOC_AC97_BUS
+
+config SND_SAMSUNG_SPDIF
+	tristate
+	select SND_SOC_SPDIF
+
+config SND_SAMSUNG_I2S
+	tristate
+
+config SND_SOC_SAMSUNG_NEO1973_WM8753
+	tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
+	depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
+	select SND_S3C24XX_I2S
+	select SND_SOC_WM8753
+	select SND_SOC_DFBMCS320
+	help
+	  Say Y here to enable audio support for the Openmoko Neo1973
+	  Smartphones.
+
+config SND_SOC_SAMSUNG_JIVE_WM8750
+	tristate "SoC I2S Audio support for Jive"
+	depends on SND_SOC_SAMSUNG && MACH_JIVE
+	select SND_SOC_WM8750
+	select SND_S3C2412_SOC_I2S
+	help
+	  Sat Y if you want to add support for SoC audio on the Jive.
+
+config SND_SOC_SAMSUNG_SMDK_WM8580
+	tristate "SoC I2S Audio support for WM8580 on SMDK"
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110)
+	select SND_SOC_WM8580
+	select SND_SAMSUNG_I2S
+	help
+	  Say Y if you want to add support for SoC audio on the SMDKs.
+
+config SND_SOC_SAMSUNG_SMDK_WM8994
+	tristate "SoC I2S Audio support for WM8994 on SMDK"
+	depends on SND_SOC_SAMSUNG
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_WM8994
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_I2S
+	help
+		Say Y if you want to add support for SoC audio on the SMDKs.
+
+config SND_SOC_SAMSUNG_SMDK2443_WM9710
+	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+	depends on SND_SOC_SAMSUNG && MACH_SMDK2443
+	select S3C2410_DMA
+	select AC97_BUS
+	select SND_SOC_AC97_CODEC
+	select SND_SAMSUNG_AC97
+	help
+	  Say Y if you want to add support for SoC audio on smdk2443
+	  with the WM9710.
+
+config SND_SOC_SAMSUNG_LN2440SBC_ALC650
+	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	select S3C2410_DMA
+	select AC97_BUS
+	select SND_SOC_AC97_CODEC
+	select SND_SAMSUNG_AC97
+	help
+	  Say Y if you want to add support for SoC audio on ln2440sbc
+	  with the ALC650.
+
+config SND_SOC_SAMSUNG_S3C24XX_UDA134X
+	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	select SND_S3C24XX_I2S
+	select SND_SOC_L3
+	select SND_SOC_UDA134X
+
+config SND_SOC_SAMSUNG_SIMTEC
+	tristate
+	help
+	  Internal node for common S3C24XX/Simtec suppor
+
+config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
+	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	select SND_S3C24XX_I2S
+	select SND_SOC_TLV320AIC23
+	select SND_SOC_SAMSUNG_SIMTEC
+
+config SND_SOC_SAMSUNG_SIMTEC_HERMES
+	tristate "SoC I2S Audio support for Simtec Hermes board"
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	select SND_S3C24XX_I2S
+	select SND_SOC_TLV320AIC3X
+	select SND_SOC_SAMSUNG_SIMTEC
+
+config SND_SOC_SAMSUNG_H1940_UDA1380
+	tristate "Audio support for the HP iPAQ H1940"
+	depends on SND_SOC_SAMSUNG && ARCH_H1940
+	select SND_S3C24XX_I2S
+	select SND_SOC_UDA1380
+	help
+	  This driver provides audio support for HP iPAQ h1940 PDA.
+
+config SND_SOC_SAMSUNG_RX1950_UDA1380
+	tristate "Audio support for the HP iPAQ RX1950"
+	depends on SND_SOC_SAMSUNG && MACH_RX1950
+	select SND_S3C24XX_I2S
+	select SND_SOC_UDA1380
+	help
+	  This driver provides audio support for HP iPAQ RX1950 PDA.
+
+config SND_SOC_SAMSUNG_SMDK_WM9713
+	tristate "SoC AC97 Audio support for SMDK with WM9713"
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
+	select SND_SOC_WM9713
+	select SND_SAMSUNG_AC97
+	help
+	  Sat Y if you want to add support for SoC audio on the SMDK.
+
+config SND_SOC_SMARTQ
+	tristate "SoC I2S Audio support for SmartQ board"
+	depends on SND_SOC_SAMSUNG && MACH_SMARTQ
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM8750
+
+config SND_SOC_GONI_AQUILA_WM8994
+	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
+	depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
+	depends on I2C=y && GENERIC_HARDIRQS
+	select SND_SAMSUNG_I2S
+	select MFD_WM8994
+	select SND_SOC_WM8994
+	help
+	  Say Y if you want to add support for SoC audio on goni or aquila
+	  with the WM8994.
+
+config SND_SOC_SAMSUNG_SMDK_SPDIF
+	tristate "SoC S/PDIF Audio support for SMDK"
+	depends on SND_SOC_SAMSUNG
+	select SND_SAMSUNG_SPDIF
+	help
+	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
+
+config SND_SOC_SMDK_WM8580_PCM
+	tristate "SoC PCM Audio support for WM8580 on SMDK"
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110)
+	select SND_SOC_WM8580
+	select SND_SAMSUNG_PCM
+	help
+	  Say Y if you want to add support for SoC audio on the SMDK.
+
+config SND_SOC_SMDK_WM8994_PCM
+	tristate "SoC PCM Audio support for WM8994 on SMDK"
+	depends on SND_SOC_SAMSUNG
+	depends on I2C=y && GENERIC_HARDIRQS
+	select MFD_WM8994
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_PCM
+	help
+	  Say Y if you want to add support for SoC audio on the SMDK
+
+config SND_SOC_SPEYSIDE
+	tristate "Audio support for Wolfson Speyside"
+	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM8996
+	select SND_SOC_WM9081
+	select SND_SOC_WM0010
+	select SND_SOC_WM1250_EV1
+
+config SND_SOC_TOBERMORY
+	tristate "Audio support for Wolfson Tobermory"
+	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM8962
+
+config SND_SOC_BELLS
+	tristate "Audio support for Wolfson Bells"
+	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM5102
+	select SND_SOC_WM5110
+	select SND_SOC_WM9081
+	select SND_SOC_WM0010
+	select SND_SOC_WM1250_EV1
+
+config SND_SOC_LOWLAND
+	tristate "Audio support for Wolfson Lowland"
+	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM5100
+	select SND_SOC_WM9081
+
+config SND_SOC_LITTLEMILL
+	tristate "Audio support for Wolfson Littlemill"
+	depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
+	select SND_SAMSUNG_I2S
+	select MFD_WM8994
+	select SND_SOC_WM8994

sound/soc/samsung/Makefile

@@ -0,0 +1,69 @@
+# S3c24XX Platform Support
+snd-soc-s3c24xx-objs := dma.o
+snd-soc-idma-objs := idma.o
+snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
+snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
+snd-soc-ac97-objs := ac97.o
+snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
+snd-soc-samsung-spdif-objs := spdif.o
+snd-soc-pcm-objs := pcm.o
+snd-soc-i2s-objs := i2s.o
+
+obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c24xx.o
+obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
+obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
+obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
+obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
+obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
+obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
+obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
+obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-idma.o
+
+# S3C24XX Machine Support
+snd-soc-jive-wm8750-objs := jive_wm8750.o
+snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
+snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
+snd-soc-h1940-uda1380-objs := h1940_uda1380.o
+snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
+snd-soc-smdk-wm8580-objs := smdk_wm8580.o
+snd-soc-smdk-wm8994-objs := smdk_wm8994.o
+snd-soc-smdk-wm9713-objs := smdk_wm9713.o
+snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
+snd-soc-goni-wm8994-objs := goni_wm8994.o
+snd-soc-smdk-spdif-objs := smdk_spdif.o
+snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
+snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
+snd-soc-speyside-objs := speyside.o
+snd-soc-tobermory-objs := tobermory.o
+snd-soc-lowland-objs := lowland.o
+snd-soc-littlemill-objs := littlemill.o
+snd-soc-bells-objs := bells.o
+
+obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380) += snd-soc-h1940-uda1380.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994) += snd-soc-smdk-wm8994.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o
+obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
+obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
+obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
+obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
+obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
+obj-$(CONFIG_SND_SOC_TOBERMORY) += snd-soc-tobermory.o
+obj-$(CONFIG_SND_SOC_LOWLAND) += snd-soc-lowland.o
+obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
+obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o

sound/soc/samsung/ac97.c

@@ -0,0 +1,529 @@
+/* sound/soc/samsung/ac97.c
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ * 	Evolved from s3c2443-ac97.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Author: Jaswinder Singh <jassisinghbrar@gmail.com>
+ * 	Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+
+#include <mach/dma.h>
+#include "regs-ac97.h"
+#include <linux/platform_data/asoc-s3c.h>
+
+#include "dma.h"
+
+#define AC_CMD_ADDR(x) (x << 16)
+#define AC_CMD_DATA(x) (x & 0xffff)
+
+#define S3C_AC97_DAI_PCM 0
+#define S3C_AC97_DAI_MIC 1
+
+struct s3c_ac97_info {
+	struct clk         *ac97_clk;
+	void __iomem	   *regs;
+	struct mutex       lock;
+	struct completion  done;
+};
+static struct s3c_ac97_info s3c_ac97;
+
+static struct s3c2410_dma_client s3c_dma_client_out = {
+	.name = "AC97 PCMOut"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_in = {
+	.name = "AC97 PCMIn"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_micin = {
+	.name = "AC97 MicIn"
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_out = {
+	.client		= &s3c_dma_client_out,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_in = {
+	.client		= &s3c_dma_client_in,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_mic_in = {
+	.client		= &s3c_dma_client_micin,
+	.dma_size	= 4,
+};
+
+static void s3c_ac97_activate(struct snd_ac97 *ac97)
+{
+	u32 ac_glbctrl, stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to activate!");
+}
+
+static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
+	unsigned short reg)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+	u32 stat, addr, data;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to read!");
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
+	addr = (stat >> 16) & 0x7f;
+	data = (stat & 0xffff);
+
+	if (addr != reg)
+		pr_err("ac97: req addr = %02x, rep addr = %02x\n",
+			reg, addr);
+
+	mutex_unlock(&s3c_ac97.lock);
+
+	return (unsigned short)data;
+}
+
+static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+	unsigned short val)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to write!");
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	mutex_unlock(&s3c_ac97.lock);
+}
+
+static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	pr_debug("AC97: Cold reset\n");
+	writel(S3C_AC97_GLBCTRL_COLDRESET,
+			s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+}
+
+static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	u32 stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	pr_debug("AC97: Warm reset\n");
+
+	writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	s3c_ac97_activate(ac97);
+}
+
+static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
+{
+	u32 ac_glbctrl, ac_glbstat;
+
+	ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
+
+	if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
+
+		ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
+		writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+		complete(&s3c_ac97.done);
+	}
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= (1<<30); /* Clear interrupt */
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	return IRQ_HANDLED;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read       = s3c_ac97_read,
+	.write      = s3c_ac97_write,
+	.warm_reset = s3c_ac97_warm_reset,
+	.reset      = s3c_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct s3c_dma_params *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &s3c_ac97_pcm_out;
+	else
+		dma_data = &s3c_ac97_pcm_in;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	return 0;
+}
+
+static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
+	else
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
+		else
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
+
+	return 0;
+}
+
+static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+				      struct snd_pcm_hw_params *params,
+				      struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return -ENODEV;
+	else
+		snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
+
+	return 0;
+}
+
+static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
+				    int cmd, struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!dma_data->ops)
+		dma_data->ops = samsung_dma_get_ops();
+
+	dma_data->ops->started(dma_data->channel);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops s3c_ac97_dai_ops = {
+	.hw_params	= s3c_ac97_hw_params,
+	.trigger	= s3c_ac97_trigger,
+};
+
+static const struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
+	.hw_params	= s3c_ac97_hw_mic_params,
+	.trigger	= s3c_ac97_mic_trigger,
+};
+
+static struct snd_soc_dai_driver s3c_ac97_dai[] = {
+	[S3C_AC97_DAI_PCM] = {
+		.name =	"samsung-ac97",
+		.ac97_control = 1,
+		.playback = {
+			.stream_name = "AC97 Playback",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.capture = {
+			.stream_name = "AC97 Capture",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_dai_ops,
+	},
+	[S3C_AC97_DAI_MIC] = {
+		.name = "samsung-ac97-mic",
+		.ac97_control = 1,
+		.capture = {
+			.stream_name = "AC97 Mic Capture",
+			.channels_min = 1,
+			.channels_max = 1,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_mic_dai_ops,
+	},
+};
+
+static const struct snd_soc_component_driver s3c_ac97_component = {
+	.name		= "s3c-ac97",
+};
+
+static int s3c_ac97_probe(struct platform_device *pdev)
+{
+	struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
+	struct s3c_audio_pdata *ac97_pdata;
+	int ret;
+
+	ac97_pdata = pdev->dev.platform_data;
+	if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
+		dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
+		return -EINVAL;
+	}
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (!dmamic_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
+		return -ENXIO;
+	}
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "ac97")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		return -EBUSY;
+	}
+
+	s3c_ac97_pcm_out.channel = dmatx_res->start;
+	s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_pcm_in.channel = dmarx_res->start;
+	s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_mic_in.channel = dmamic_res->start;
+	s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
+
+	init_completion(&s3c_ac97.done);
+	mutex_init(&s3c_ac97.lock);
+
+	s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
+	if (s3c_ac97.regs == NULL) {
+		dev_err(&pdev->dev, "Unable to ioremap register region\n");
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
+	if (IS_ERR(s3c_ac97.ac97_clk)) {
+		dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+	clk_prepare_enable(s3c_ac97.ac97_clk);
+
+	if (ac97_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+
+	ret = request_irq(irq_res->start, s3c_ac97_irq,
+					0, "AC97", NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
+		goto err4;
+	}
+
+	ret = snd_soc_register_component(&pdev->dev, &s3c_ac97_component,
+					 s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai));
+	if (ret)
+		goto err5;
+
+	ret = asoc_dma_platform_register(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get register DMA: %d\n", ret);
+		goto err6;
+	}
+
+	return 0;
+err6:
+	snd_soc_unregister_component(&pdev->dev);
+err5:
+	free_irq(irq_res->start, NULL);
+err4:
+err3:
+	clk_disable_unprepare(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+err2:
+	iounmap(s3c_ac97.regs);
+err1:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return ret;
+}
+
+static int s3c_ac97_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res, *irq_res;
+
+	asoc_dma_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_res)
+		free_irq(irq_res->start, NULL);
+
+	clk_disable_unprepare(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+
+	iounmap(s3c_ac97.regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res)
+		release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return 0;
+}
+
+static struct platform_driver s3c_ac97_driver = {
+	.probe  = s3c_ac97_probe,
+	.remove = s3c_ac97_remove,
+	.driver = {
+		.name = "samsung-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(s3c_ac97_driver);
+
+MODULE_AUTHOR("Jaswinder Singh, <jassisinghbrar@gmail.com>");
+MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-ac97");

sound/soc/samsung/bells.c

@@ -0,0 +1,454 @@
+/*
+ * Bells audio support
+ *
+ * Copyright 2012 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include "../codecs/wm5102.h"
+#include "../codecs/wm9081.h"
+
+/* BCLK2 is fixed at this currently */
+#define BCLK2_RATE (64 * 8000)
+
+/*
+ * Expect a 24.576MHz crystal if one is fitted (the driver will function
+ * if this is not fitted).
+ */
+#define MCLK_RATE 24576000
+
+#define SYS_AUDIO_RATE 44100
+#define SYS_MCLK_RATE  (SYS_AUDIO_RATE * 512)
+
+#define DAI_AP_DSP    0
+#define DAI_DSP_CODEC 1
+#define DAI_CODEC_CP  2
+#define DAI_CODEC_SUB 3
+
+struct bells_drvdata {
+	int sysclk_rate;
+	int asyncclk_rate;
+};
+
+static struct bells_drvdata wm2200_drvdata = {
+	.sysclk_rate = 22579200,
+};
+
+static struct bells_drvdata wm5102_drvdata = {
+	.sysclk_rate = 45158400,
+	.asyncclk_rate = 49152000,
+};
+
+static struct bells_drvdata wm5110_drvdata = {
+	.sysclk_rate = 135475200,
+	.asyncclk_rate = 147456000,
+};
+
+static int bells_set_bias_level(struct snd_soc_card *card,
+				struct snd_soc_dapm_context *dapm,
+				enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[DAI_DSP_CODEC].codec_dai;
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct bells_drvdata *bells = card->drvdata;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_PREPARE:
+		if (dapm->bias_level != SND_SOC_BIAS_STANDBY)
+			break;
+
+		ret = snd_soc_codec_set_pll(codec, WM5102_FLL1,
+					    ARIZONA_FLL_SRC_MCLK1,
+					    MCLK_RATE,
+					    bells->sysclk_rate);
+		if (ret < 0)
+			pr_err("Failed to start FLL: %d\n", ret);
+
+		if (bells->asyncclk_rate) {
+			ret = snd_soc_codec_set_pll(codec, WM5102_FLL2,
+						    ARIZONA_FLL_SRC_AIF2BCLK,
+						    BCLK2_RATE,
+						    bells->asyncclk_rate);
+			if (ret < 0)
+				pr_err("Failed to start FLL: %d\n", ret);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int bells_set_bias_level_post(struct snd_soc_card *card,
+				     struct snd_soc_dapm_context *dapm,
+				     enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[DAI_DSP_CODEC].codec_dai;
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct bells_drvdata *bells = card->drvdata;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		ret = snd_soc_codec_set_pll(codec, WM5102_FLL1, 0, 0, 0);
+		if (ret < 0) {
+			pr_err("Failed to stop FLL: %d\n", ret);
+			return ret;
+		}
+
+		if (bells->asyncclk_rate) {
+			ret = snd_soc_codec_set_pll(codec, WM5102_FLL2,
+						    0, 0, 0);
+			if (ret < 0) {
+				pr_err("Failed to stop FLL: %d\n", ret);
+				return ret;
+			}
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	dapm->bias_level = level;
+
+	return 0;
+}
+
+static int bells_late_probe(struct snd_soc_card *card)
+{
+	struct bells_drvdata *bells = card->drvdata;
+	struct snd_soc_codec *wm0010 = card->rtd[DAI_AP_DSP].codec;
+	struct snd_soc_codec *codec = card->rtd[DAI_DSP_CODEC].codec;
+	struct snd_soc_dai *aif1_dai = card->rtd[DAI_DSP_CODEC].codec_dai;
+	struct snd_soc_dai *aif2_dai;
+	struct snd_soc_dai *aif3_dai;
+	struct snd_soc_dai *wm9081_dai;
+	int ret;
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_SYSCLK,
+				       ARIZONA_CLK_SRC_FLL1,
+				       bells->sysclk_rate,
+				       SND_SOC_CLOCK_IN);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_sysclk(wm0010, 0, 0, SYS_MCLK_RATE, 0);
+	if (ret != 0) {
+		dev_err(wm0010->dev, "Failed to set WM0010 clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(aif1_dai, ARIZONA_CLK_SYSCLK, 0, 0);
+	if (ret != 0)
+		dev_err(aif1_dai->dev, "Failed to set AIF1 clock: %d\n", ret);
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_OPCLK, 0,
+				       SYS_MCLK_RATE, SND_SOC_CLOCK_OUT);
+	if (ret != 0)
+		dev_err(codec->dev, "Failed to set OPCLK: %d\n", ret);
+
+	if (card->num_rtd == DAI_CODEC_CP)
+		return 0;
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_ASYNCCLK,
+				       ARIZONA_CLK_SRC_FLL2,
+				       bells->asyncclk_rate,
+				       SND_SOC_CLOCK_IN);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to set ASYNCCLK: %d\n", ret);
+		return ret;
+	}
+
+	aif2_dai = card->rtd[DAI_CODEC_CP].cpu_dai;
+
+	ret = snd_soc_dai_set_sysclk(aif2_dai, ARIZONA_CLK_ASYNCCLK, 0, 0);
+	if (ret != 0) {
+		dev_err(aif2_dai->dev, "Failed to set AIF2 clock: %d\n", ret);
+		return ret;
+	}
+
+	if (card->num_rtd == DAI_CODEC_SUB)
+		return 0;
+
+	aif3_dai = card->rtd[DAI_CODEC_SUB].cpu_dai;
+	wm9081_dai = card->rtd[DAI_CODEC_SUB].codec_dai;
+
+	ret = snd_soc_dai_set_sysclk(aif3_dai, ARIZONA_CLK_SYSCLK, 0, 0);
+	if (ret != 0) {
+		dev_err(aif1_dai->dev, "Failed to set AIF1 clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_sysclk(wm9081_dai->codec, WM9081_SYSCLK_MCLK,
+				       0, SYS_MCLK_RATE, 0);
+	if (ret != 0) {
+		dev_err(wm9081_dai->dev, "Failed to set MCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_pcm_stream baseband_params = {
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	.rate_min = 8000,
+	.rate_max = 8000,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static const struct snd_soc_pcm_stream sub_params = {
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	.rate_min = SYS_AUDIO_RATE,
+	.rate_max = SYS_AUDIO_RATE,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static struct snd_soc_dai_link bells_dai_wm2200[] = {
+	{
+		.name = "CPU-DSP",
+		.stream_name = "CPU-DSP",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm0010-sdi1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "spi0.0",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+	},
+	{
+		.name = "DSP-CODEC",
+		.stream_name = "DSP-CODEC",
+		.cpu_dai_name = "wm0010-sdi2",
+		.codec_dai_name = "wm2200",
+		.codec_name = "wm2200.1-003a",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.params = &sub_params,
+		.ignore_suspend = 1,
+	},
+};
+
+static struct snd_soc_dai_link bells_dai_wm5102[] = {
+	{
+		.name = "CPU-DSP",
+		.stream_name = "CPU-DSP",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm0010-sdi1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "spi0.0",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+	},
+	{
+		.name = "DSP-CODEC",
+		.stream_name = "DSP-CODEC",
+		.cpu_dai_name = "wm0010-sdi2",
+		.codec_dai_name = "wm5102-aif1",
+		.codec_name = "wm5102-codec",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.params = &sub_params,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "Baseband",
+		.stream_name = "Baseband",
+		.cpu_dai_name = "wm5102-aif2",
+		.codec_dai_name = "wm1250-ev1",
+		.codec_name = "wm1250-ev1.1-0027",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+		.params = &baseband_params,
+	},
+	{
+		.name = "Sub",
+		.stream_name = "Sub",
+		.cpu_dai_name = "wm5102-aif3",
+		.codec_dai_name = "wm9081-hifi",
+		.codec_name = "wm9081.1-006c",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBS_CFS,
+		.ignore_suspend = 1,
+		.params = &sub_params,
+	},
+};
+
+static struct snd_soc_dai_link bells_dai_wm5110[] = {
+	{
+		.name = "CPU-DSP",
+		.stream_name = "CPU-DSP",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm0010-sdi1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "spi0.0",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+	},
+	{
+		.name = "DSP-CODEC",
+		.stream_name = "DSP-CODEC",
+		.cpu_dai_name = "wm0010-sdi2",
+		.codec_dai_name = "wm5110-aif1",
+		.codec_name = "wm5110-codec",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.params = &sub_params,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "Baseband",
+		.stream_name = "Baseband",
+		.cpu_dai_name = "wm5110-aif2",
+		.codec_dai_name = "wm1250-ev1",
+		.codec_name = "wm1250-ev1.1-0027",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+		.params = &baseband_params,
+	},
+	{
+		.name = "Sub",
+		.stream_name = "Sub",
+		.cpu_dai_name = "wm5110-aif3",
+		.codec_dai_name = "wm9081-hifi",
+		.codec_name = "wm9081.1-006c",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBS_CFS,
+		.ignore_suspend = 1,
+		.params = &sub_params,
+	},
+};
+
+static struct snd_soc_codec_conf bells_codec_conf[] = {
+	{
+		.dev_name = "wm9081.1-006c",
+		.name_prefix = "Sub",
+	},
+};
+
+static struct snd_soc_dapm_route bells_routes[] = {
+	{ "Sub CLK_SYS", NULL, "OPCLK" },
+};
+
+static struct snd_soc_card bells_cards[] = {
+	{
+		.name = "Bells WM2200",
+		.owner = THIS_MODULE,
+		.dai_link = bells_dai_wm2200,
+		.num_links = ARRAY_SIZE(bells_dai_wm2200),
+		.codec_conf = bells_codec_conf,
+		.num_configs = ARRAY_SIZE(bells_codec_conf),
+
+		.late_probe = bells_late_probe,
+
+		.dapm_routes = bells_routes,
+		.num_dapm_routes = ARRAY_SIZE(bells_routes),
+
+		.set_bias_level = bells_set_bias_level,
+		.set_bias_level_post = bells_set_bias_level_post,
+
+		.drvdata = &wm2200_drvdata,
+	},
+	{
+		.name = "Bells WM5102",
+		.owner = THIS_MODULE,
+		.dai_link = bells_dai_wm5102,
+		.num_links = ARRAY_SIZE(bells_dai_wm5102),
+		.codec_conf = bells_codec_conf,
+		.num_configs = ARRAY_SIZE(bells_codec_conf),
+
+		.late_probe = bells_late_probe,
+
+		.dapm_routes = bells_routes,
+		.num_dapm_routes = ARRAY_SIZE(bells_routes),
+
+		.set_bias_level = bells_set_bias_level,
+		.set_bias_level_post = bells_set_bias_level_post,
+
+		.drvdata = &wm5102_drvdata,
+	},
+	{
+		.name = "Bells WM5110",
+		.owner = THIS_MODULE,
+		.dai_link = bells_dai_wm5110,
+		.num_links = ARRAY_SIZE(bells_dai_wm5110),
+		.codec_conf = bells_codec_conf,
+		.num_configs = ARRAY_SIZE(bells_codec_conf),
+
+		.late_probe = bells_late_probe,
+
+		.dapm_routes = bells_routes,
+		.num_dapm_routes = ARRAY_SIZE(bells_routes),
+
+		.set_bias_level = bells_set_bias_level,
+		.set_bias_level_post = bells_set_bias_level_post,
+
+		.drvdata = &wm5110_drvdata,
+	},
+};
+
+
+static int bells_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	bells_cards[pdev->id].dev = &pdev->dev;
+
+	ret = snd_soc_register_card(&bells_cards[pdev->id]);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"snd_soc_register_card(%s) failed: %d\n",
+			bells_cards[pdev->id].name, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bells_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_card(&bells_cards[pdev->id]);
+
+	return 0;
+}
+
+static struct platform_driver bells_driver = {
+	.driver = {
+		.name = "bells",
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = bells_probe,
+	.remove = bells_remove,
+};
+
+module_platform_driver(bells_driver);
+
+MODULE_DESCRIPTION("Bells audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bells");

sound/soc/samsung/dma.c

@@ -0,0 +1,450 @@
+/*
+ * dma.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+
+#define ST_RUNNING		(1<<0)
+#define ST_OPENED		(1<<1)
+
+static const struct snd_pcm_hardware dma_hardware = {
+	.info			= SNDRV_PCM_INFO_INTERLEAVED |
+				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				    SNDRV_PCM_INFO_MMAP |
+				    SNDRV_PCM_INFO_MMAP_VALID,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				    SNDRV_PCM_FMTBIT_U16_LE |
+				    SNDRV_PCM_FMTBIT_U8 |
+				    SNDRV_PCM_FMTBIT_S8,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 128*1024,
+	.period_bytes_min	= PAGE_SIZE,
+	.period_bytes_max	= PAGE_SIZE*2,
+	.periods_min		= 2,
+	.periods_max		= 128,
+	.fifo_size		= 32,
+};
+
+struct runtime_data {
+	spinlock_t lock;
+	int state;
+	unsigned int dma_loaded;
+	unsigned int dma_period;
+	dma_addr_t dma_start;
+	dma_addr_t dma_pos;
+	dma_addr_t dma_end;
+	struct s3c_dma_params *params;
+};
+
+static void audio_buffdone(void *data);
+
+/* dma_enqueue
+ *
+ * place a dma buffer onto the queue for the dma system
+ * to handle.
+ */
+static void dma_enqueue(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	dma_addr_t pos = prtd->dma_pos;
+	unsigned int limit;
+	struct samsung_dma_prep dma_info;
+
+	pr_debug("Entered %s\n", __func__);
+
+	limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
+
+	pr_debug("%s: loaded %d, limit %d\n",
+				__func__, prtd->dma_loaded, limit);
+
+	dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
+	dma_info.direction =
+		(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+		? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
+	dma_info.fp = audio_buffdone;
+	dma_info.fp_param = substream;
+	dma_info.period = prtd->dma_period;
+	dma_info.len = prtd->dma_period*limit;
+
+	while (prtd->dma_loaded < limit) {
+		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
+
+		if ((pos + dma_info.period) > prtd->dma_end) {
+			dma_info.period  = prtd->dma_end - pos;
+			pr_debug("%s: corrected dma len %ld\n",
+					__func__, dma_info.period);
+		}
+
+		dma_info.buf = pos;
+		prtd->params->ops->prepare(prtd->params->ch, &dma_info);
+
+		prtd->dma_loaded++;
+		pos += prtd->dma_period;
+		if (pos >= prtd->dma_end)
+			pos = prtd->dma_start;
+	}
+
+	prtd->dma_pos = pos;
+}
+
+static void audio_buffdone(void *data)
+{
+	struct snd_pcm_substream *substream = data;
+	struct runtime_data *prtd = substream->runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (prtd->state & ST_RUNNING) {
+		prtd->dma_pos += prtd->dma_period;
+		if (prtd->dma_pos >= prtd->dma_end)
+			prtd->dma_pos = prtd->dma_start;
+
+		if (substream)
+			snd_pcm_period_elapsed(substream);
+
+		spin_lock(&prtd->lock);
+		if (!samsung_dma_has_circular()) {
+			prtd->dma_loaded--;
+			dma_enqueue(substream);
+		}
+		spin_unlock(&prtd->lock);
+	}
+}
+
+static int dma_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	unsigned long totbytes = params_buffer_bytes(params);
+	struct s3c_dma_params *dma =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	struct samsung_dma_req req;
+	struct samsung_dma_config config;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!dma)
+		return 0;
+
+	/* this may get called several times by oss emulation
+	 * with different params -HW */
+	if (prtd->params == NULL) {
+		/* prepare DMA */
+		prtd->params = dma;
+
+		pr_debug("params %p, client %p, channel %d\n", prtd->params,
+			prtd->params->client, prtd->params->channel);
+
+		prtd->params->ops = samsung_dma_get_ops();
+
+		req.cap = (samsung_dma_has_circular() ?
+			DMA_CYCLIC : DMA_SLAVE);
+		req.client = prtd->params->client;
+		config.direction =
+			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+			? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
+		config.width = prtd->params->dma_size;
+		config.fifo = prtd->params->dma_addr;
+		prtd->params->ch = prtd->params->ops->request(
+				prtd->params->channel, &req, rtd->cpu_dai->dev,
+				prtd->params->ch_name);
+		prtd->params->ops->config(prtd->params->ch, &config);
+	}
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	runtime->dma_bytes = totbytes;
+
+	spin_lock_irq(&prtd->lock);
+	prtd->dma_loaded = 0;
+	prtd->dma_period = params_period_bytes(params);
+	prtd->dma_start = runtime->dma_addr;
+	prtd->dma_pos = prtd->dma_start;
+	prtd->dma_end = prtd->dma_start + totbytes;
+	spin_unlock_irq(&prtd->lock);
+
+	return 0;
+}
+
+static int dma_hw_free(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	if (prtd->params) {
+		prtd->params->ops->flush(prtd->params->ch);
+		prtd->params->ops->release(prtd->params->ch,
+					prtd->params->client);
+		prtd->params = NULL;
+	}
+
+	return 0;
+}
+
+static int dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->params)
+		return 0;
+
+	/* flush the DMA channel */
+	prtd->params->ops->flush(prtd->params->ch);
+
+	prtd->dma_loaded = 0;
+	prtd->dma_pos = prtd->dma_start;
+
+	/* enqueue dma buffers */
+	dma_enqueue(substream);
+
+	return ret;
+}
+
+static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		prtd->state |= ST_RUNNING;
+		prtd->params->ops->trigger(prtd->params->ch);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		prtd->state &= ~ST_RUNNING;
+		prtd->params->ops->stop(prtd->params->ch);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&prtd->lock);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t
+dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+	unsigned long res;
+
+	pr_debug("Entered %s\n", __func__);
+
+	res = prtd->dma_pos - prtd->dma_start;
+
+	pr_debug("Pointer offset: %lu\n", res);
+
+	/* we seem to be getting the odd error from the pcm library due
+	 * to out-of-bounds pointers. this is maybe due to the dma engine
+	 * not having loaded the new values for the channel before being
+	 * called... (todo - fix )
+	 */
+
+	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
+		if (res == snd_pcm_lib_buffer_bytes(substream))
+			res = 0;
+	}
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+	snd_soc_set_runtime_hwparams(substream, &dma_hardware);
+
+	prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+	return 0;
+}
+
+static int dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!prtd)
+		pr_debug("dma_close called with prtd == NULL\n");
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int dma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	pr_debug("Entered %s\n", __func__);
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops dma_ops = {
+	.open		= dma_open,
+	.close		= dma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= dma_hw_params,
+	.hw_free	= dma_hw_free,
+	.prepare	= dma_prepare,
+	.trigger	= dma_trigger,
+	.pointer	= dma_pointer,
+	.mmap		= dma_mmap,
+};
+
+static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = dma_hardware.buffer_bytes_max;
+
+	pr_debug("Entered %s\n", __func__);
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static void dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	pr_debug("Entered %s\n", __func__);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 dma_mask = DMA_BIT_MASK(32);
+
+static int dma_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &dma_mask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		ret = preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+		ret = preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+out:
+	return ret;
+}
+
+static struct snd_soc_platform_driver samsung_asoc_platform = {
+	.ops		= &dma_ops,
+	.pcm_new	= dma_new,
+	.pcm_free	= dma_free_dma_buffers,
+};
+
+int asoc_dma_platform_register(struct device *dev)
+{
+	return snd_soc_register_platform(dev, &samsung_asoc_platform);
+}
+EXPORT_SYMBOL_GPL(asoc_dma_platform_register);
+
+void asoc_dma_platform_unregister(struct device *dev)
+{
+	snd_soc_unregister_platform(dev);
+}
+EXPORT_SYMBOL_GPL(asoc_dma_platform_unregister);
+
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung ASoC DMA Driver");
+MODULE_LICENSE("GPL");

sound/soc/samsung/dma.h

@@ -0,0 +1,28 @@
+/*
+ *  dma.h --
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  ALSA PCM interface for the Samsung SoC
+ */
+
+#ifndef _S3C_AUDIO_H
+#define _S3C_AUDIO_H
+
+struct s3c_dma_params {
+	struct s3c2410_dma_client *client;	/* stream identifier */
+	int channel;				/* Channel ID */
+	dma_addr_t dma_addr;
+	int dma_size;			/* Size of the DMA transfer */
+	unsigned ch;
+	struct samsung_dma_ops *ops;
+	char *ch_name;
+};
+
+int asoc_dma_platform_register(struct device *dev);
+void asoc_dma_platform_unregister(struct device *dev);
+
+#endif

sound/soc/samsung/goni_wm8994.c

@@ -0,0 +1,307 @@
+/*
+ * goni_wm8994.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8994.h"
+
+#define MACHINE_NAME	0
+#define CPU_VOICE_DAI	1
+
+static const char *aquila_str[] = {
+	[MACHINE_NAME] = "aquila",
+	[CPU_VOICE_DAI] = "aquila-voice-dai",
+};
+
+static struct snd_soc_card goni;
+static struct platform_device *goni_snd_device;
+
+/* 3.5 pie jack */
+static struct snd_soc_jack jack;
+
+/* 3.5 pie jack detection DAPM pins */
+static struct snd_soc_jack_pin jack_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	}, {
+		.pin = "Headset Stereophone",
+		.mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL |
+			SND_JACK_AVOUT,
+	},
+};
+
+/* 3.5 pie jack detection gpios */
+static struct snd_soc_jack_gpio jack_gpios[] = {
+	{
+		.gpio = S5PV210_GPH0(6),
+		.name = "DET_3.5",
+		.report = SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+			SND_JACK_AVOUT,
+		.debounce_time = 200,
+	},
+};
+
+static const struct snd_soc_dapm_widget goni_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Ext Left Spk", NULL),
+	SND_SOC_DAPM_SPK("Ext Right Spk", NULL),
+	SND_SOC_DAPM_SPK("Ext Rcv", NULL),
+	SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Main Mic", NULL),
+	SND_SOC_DAPM_MIC("2nd Mic", NULL),
+	SND_SOC_DAPM_LINE("Radio In", NULL),
+};
+
+static const struct snd_soc_dapm_route goni_dapm_routes[] = {
+	{"Ext Left Spk", NULL, "SPKOUTLP"},
+	{"Ext Left Spk", NULL, "SPKOUTLN"},
+
+	{"Ext Right Spk", NULL, "SPKOUTRP"},
+	{"Ext Right Spk", NULL, "SPKOUTRN"},
+
+	{"Ext Rcv", NULL, "HPOUT2N"},
+	{"Ext Rcv", NULL, "HPOUT2P"},
+
+	{"Headset Stereophone", NULL, "HPOUT1L"},
+	{"Headset Stereophone", NULL, "HPOUT1R"},
+
+	{"IN1RN", NULL, "Headset Mic"},
+	{"IN1RP", NULL, "Headset Mic"},
+
+	{"IN1RN", NULL, "2nd Mic"},
+	{"IN1RP", NULL, "2nd Mic"},
+
+	{"IN1LN", NULL, "Main Mic"},
+	{"IN1LP", NULL, "Main Mic"},
+
+	{"IN2LN", NULL, "Radio In"},
+	{"IN2RN", NULL, "Radio In"},
+};
+
+static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int ret;
+
+	/* set endpoints to not connected */
+	snd_soc_dapm_nc_pin(dapm, "IN2LP:VXRN");
+	snd_soc_dapm_nc_pin(dapm, "IN2RP:VXRP");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT1N");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT1P");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT2N");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT2P");
+
+	if (machine_is_aquila()) {
+		snd_soc_dapm_nc_pin(dapm, "SPKOUTRN");
+		snd_soc_dapm_nc_pin(dapm, "SPKOUTRP");
+	}
+
+	/* Headset jack detection */
+	ret = snd_soc_jack_new(codec, "Headset Jack",
+			SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,
+			&jack);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int goni_hifi_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 24000000;
+	int ret = 0;
+
+	/* set the cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec FLL */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out,
+			params_rate(params) * 256);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+			params_rate(params) * 256, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops goni_hifi_ops = {
+	.hw_params = goni_hifi_hw_params,
+};
+
+static int goni_voice_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out = 24000000;
+	int ret = 0;
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
+			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec FLL */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out,
+			params_rate(params) * 256);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2,
+			params_rate(params) * 256, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_dai_driver voice_dai = {
+	.name = "goni-voice-dai",
+	.id = 0,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static const struct snd_soc_component_driver voice_component = {
+	.name		= "goni-voice",
+};
+
+static struct snd_soc_ops goni_voice_ops = {
+	.hw_params = goni_voice_hw_params,
+};
+
+static struct snd_soc_dai_link goni_dai[] = {
+{
+	.name = "WM8994",
+	.stream_name = "WM8994 HiFi",
+	.cpu_dai_name = "samsung-i2s.0",
+	.codec_dai_name = "wm8994-aif1",
+	.platform_name = "samsung-i2s.0",
+	.codec_name = "wm8994-codec.0-001a",
+	.init = goni_wm8994_init,
+	.ops = &goni_hifi_ops,
+}, {
+	.name = "WM8994 Voice",
+	.stream_name = "Voice",
+	.cpu_dai_name = "goni-voice-dai",
+	.codec_dai_name = "wm8994-aif2",
+	.codec_name = "wm8994-codec.0-001a",
+	.ops = &goni_voice_ops,
+},
+};
+
+static struct snd_soc_card goni = {
+	.name = "goni",
+	.owner = THIS_MODULE,
+	.dai_link = goni_dai,
+	.num_links = ARRAY_SIZE(goni_dai),
+
+	.dapm_widgets = goni_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(goni_dapm_widgets),
+	.dapm_routes = goni_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(goni_dapm_routes),
+};
+
+static int __init goni_init(void)
+{
+	int ret;
+
+	if (machine_is_aquila()) {
+		voice_dai.name = aquila_str[CPU_VOICE_DAI];
+		goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI];
+		goni.name = aquila_str[MACHINE_NAME];
+	} else if (!machine_is_goni())
+		return -ENODEV;
+
+	goni_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!goni_snd_device)
+		return -ENOMEM;
+
+	/* register voice DAI here */
+	ret = snd_soc_register_component(&goni_snd_device->dev, &voice_component,
+					 &voice_dai, 1);
+	if (ret) {
+		platform_device_put(goni_snd_device);
+		return ret;
+	}
+
+	platform_set_drvdata(goni_snd_device, &goni);
+	ret = platform_device_add(goni_snd_device);
+
+	if (ret) {
+		snd_soc_unregister_component(&goni_snd_device->dev);
+		platform_device_put(goni_snd_device);
+	}
+
+	return ret;
+}
+
+static void __exit goni_exit(void)
+{
+	snd_soc_unregister_component(&goni_snd_device->dev);
+	platform_device_unregister(goni_snd_device);
+}
+
+module_init(goni_init);
+module_exit(goni_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("ALSA SoC WM8994 GONI(S5PV210)");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");

sound/soc/samsung/h1940_uda1380.c

@@ -0,0 +1,280 @@
+/*
+ * h1940-uda1380.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright (c) 2010 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * Based on version from Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "regs-iis.h"
+#include <asm/mach-types.h>
+
+#include "s3c24xx-i2s.h"
+
+static unsigned int rates[] = {
+	11025,
+	22050,
+	44100,
+};
+
+static struct snd_pcm_hw_constraint_list hw_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0,
+};
+
+static struct snd_soc_jack hp_jack;
+
+static struct snd_soc_jack_pin hp_jack_pins[] = {
+	{
+		.pin	= "Headphone Jack",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+		.invert	= 1,
+	},
+};
+
+static struct snd_soc_jack_gpio hp_jack_gpios[] = {
+	{
+		.gpio			= S3C2410_GPG(4),
+		.name			= "hp-gpio",
+		.report			= SND_JACK_HEADPHONE,
+		.invert			= 1,
+		.debounce_time		= 200,
+	},
+};
+
+static int h1940_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	runtime->hw.rate_min = hw_rates.list[0];
+	runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
+	runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
+
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					SNDRV_PCM_HW_PARAM_RATE,
+					&hw_rates);
+}
+
+static int h1940_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int div;
+	int ret;
+	unsigned int rate = params_rate(params);
+
+	switch (rate) {
+	case 11025:
+	case 22050:
+	case 44100:
+		div = s3c24xx_i2s_get_clockrate() / (384 * rate);
+		if (s3c24xx_i2s_get_clockrate() % (384 * rate) > (192 * rate))
+			div++;
+		break;
+	default:
+		dev_err(&rtd->dev, "%s: rate %d is not supported\n",
+			__func__, rate);
+		return -EINVAL;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* select clock source */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_PCLK, rate,
+			SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_384FS);
+	if (ret < 0)
+		return ret;
+
+	/* set BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(div, div));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops h1940_ops = {
+	.startup	= h1940_startup,
+	.hw_params	= h1940_hw_params,
+};
+
+static int h1940_spk_power(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event)
+{
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		gpio_set_value(S3C_GPIO_END + 9, 1);
+	else
+		gpio_set_value(S3C_GPIO_END + 9, 0);
+
+	return 0;
+}
+
+/* h1940 machine dapm widgets */
+static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_SPK("Speaker", h1940_spk_power),
+};
+
+/* h1940 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* headphone connected to VOUTLHP, VOUTRHP */
+	{"Headphone Jack", NULL, "VOUTLHP"},
+	{"Headphone Jack", NULL, "VOUTRHP"},
+
+	/* ext speaker connected to VOUTL, VOUTR  */
+	{"Speaker", NULL, "VOUTL"},
+	{"Speaker", NULL, "VOUTR"},
+
+	/* mic is connected to VINM */
+	{"VINM", NULL, "Mic Jack"},
+};
+
+static struct platform_device *s3c24xx_snd_device;
+
+static int h1940_uda1380_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int err;
+
+	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
+	snd_soc_dapm_enable_pin(dapm, "Speaker");
+	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
+
+	snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
+		&hp_jack);
+
+	snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
+		hp_jack_pins);
+
+	snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+
+	return 0;
+}
+
+/* s3c24xx digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link h1940_uda1380_dai[] = {
+	{
+		.name		= "uda1380",
+		.stream_name	= "UDA1380 Duplex",
+		.cpu_dai_name	= "s3c24xx-iis",
+		.codec_dai_name	= "uda1380-hifi",
+		.init		= h1940_uda1380_init,
+		.platform_name	= "s3c24xx-iis",
+		.codec_name	= "uda1380-codec.0-001a",
+		.ops		= &h1940_ops,
+	},
+};
+
+static struct snd_soc_card h1940_asoc = {
+	.name = "h1940",
+	.owner = THIS_MODULE,
+	.dai_link = h1940_uda1380_dai,
+	.num_links = ARRAY_SIZE(h1940_uda1380_dai),
+
+	.dapm_widgets = uda1380_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
+static int __init h1940_init(void)
+{
+	int ret;
+
+	if (!machine_is_h1940())
+		return -ENODEV;
+
+	/* configure some gpios */
+	ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
+	if (ret)
+		goto err_out;
+
+	ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
+	if (ret)
+		goto err_gpio;
+
+	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s3c24xx_snd_device) {
+		ret = -ENOMEM;
+		goto err_gpio;
+	}
+
+	platform_set_drvdata(s3c24xx_snd_device, &h1940_asoc);
+	ret = platform_device_add(s3c24xx_snd_device);
+
+	if (ret)
+		goto err_plat;
+
+	return 0;
+
+err_plat:
+	platform_device_put(s3c24xx_snd_device);
+err_gpio:
+	gpio_free(S3C_GPIO_END + 9);
+
+err_out:
+	return ret;
+}
+
+static void __exit h1940_exit(void)
+{
+	platform_device_unregister(s3c24xx_snd_device);
+	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+	gpio_free(S3C_GPIO_END + 9);
+}
+
+module_init(h1940_init);
+module_exit(h1940_exit);
+
+/* Module information */
+MODULE_AUTHOR("Arnaud Patard, Vasily Khoruzhick");
+MODULE_DESCRIPTION("ALSA SoC H1940");
+MODULE_LICENSE("GPL");

sound/soc/samsung/i2s-regs.h

@@ -0,0 +1,143 @@
+/*
+ * linux/sound/soc/samsung/i2s-regs.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung I2S driver's register header
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_I2S_REGS_H
+#define __SND_SOC_SAMSUNG_I2S_REGS_H
+
+#define I2SCON		0x0
+#define I2SMOD		0x4
+#define I2SFIC		0x8
+#define I2SPSR		0xc
+#define I2STXD		0x10
+#define I2SRXD		0x14
+#define I2SFICS		0x18
+#define I2STXDS		0x1c
+#define I2SAHB		0x20
+#define I2SSTR0		0x24
+#define I2SSIZE		0x28
+#define I2STRNCNT	0x2c
+#define I2SLVL0ADDR	0x30
+#define I2SLVL1ADDR	0x34
+#define I2SLVL2ADDR	0x38
+#define I2SLVL3ADDR	0x3c
+
+#define CON_RSTCLR		(1 << 31)
+#define CON_FRXOFSTATUS		(1 << 26)
+#define CON_FRXORINTEN		(1 << 25)
+#define CON_FTXSURSTAT		(1 << 24)
+#define CON_FTXSURINTEN		(1 << 23)
+#define CON_TXSDMA_PAUSE	(1 << 20)
+#define CON_TXSDMA_ACTIVE	(1 << 18)
+
+#define CON_FTXURSTATUS		(1 << 17)
+#define CON_FTXURINTEN		(1 << 16)
+#define CON_TXFIFO2_EMPTY	(1 << 15)
+#define CON_TXFIFO1_EMPTY	(1 << 14)
+#define CON_TXFIFO2_FULL	(1 << 13)
+#define CON_TXFIFO1_FULL	(1 << 12)
+
+#define CON_LRINDEX		(1 << 11)
+#define CON_TXFIFO_EMPTY	(1 << 10)
+#define CON_RXFIFO_EMPTY	(1 << 9)
+#define CON_TXFIFO_FULL		(1 << 8)
+#define CON_RXFIFO_FULL		(1 << 7)
+#define CON_TXDMA_PAUSE		(1 << 6)
+#define CON_RXDMA_PAUSE		(1 << 5)
+#define CON_TXCH_PAUSE		(1 << 4)
+#define CON_RXCH_PAUSE		(1 << 3)
+#define CON_TXDMA_ACTIVE	(1 << 2)
+#define CON_RXDMA_ACTIVE	(1 << 1)
+#define CON_ACTIVE		(1 << 0)
+
+#define MOD_OPCLK_CDCLK_OUT	(0 << 30)
+#define MOD_OPCLK_CDCLK_IN	(1 << 30)
+#define MOD_OPCLK_BCLK_OUT	(2 << 30)
+#define MOD_OPCLK_PCLK		(3 << 30)
+#define MOD_OPCLK_MASK		(3 << 30)
+#define MOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
+
+#define MOD_BLCS_SHIFT		26
+#define MOD_BLCS_16BIT		(0 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_8BIT		(1 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_24BIT		(2 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_MASK		(3 << MOD_BLCS_SHIFT)
+#define MOD_BLCP_SHIFT		24
+#define MOD_BLCP_16BIT		(0 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_8BIT		(1 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_24BIT		(2 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_MASK		(3 << MOD_BLCP_SHIFT)
+
+#define MOD_C2DD_HHALF		(1 << 21) /* Discard Higher-half */
+#define MOD_C2DD_LHALF		(1 << 20) /* Discard Lower-half */
+#define MOD_C1DD_HHALF		(1 << 19)
+#define MOD_C1DD_LHALF		(1 << 18)
+#define MOD_DC2_EN		(1 << 17)
+#define MOD_DC1_EN		(1 << 16)
+#define MOD_BLC_16BIT		(0 << 13)
+#define MOD_BLC_8BIT		(1 << 13)
+#define MOD_BLC_24BIT		(2 << 13)
+#define MOD_BLC_MASK		(3 << 13)
+
+#define MOD_IMS_SYSMUX		(1 << 10)
+#define MOD_SLAVE		(1 << 11)
+#define MOD_TXONLY		(0 << 8)
+#define MOD_RXONLY		(1 << 8)
+#define MOD_TXRX		(2 << 8)
+#define MOD_MASK		(3 << 8)
+#define MOD_LR_LLOW		(0 << 7)
+#define MOD_LR_RLOW		(1 << 7)
+#define MOD_SDF_IIS		(0 << 5)
+#define MOD_SDF_MSB		(1 << 5)
+#define MOD_SDF_LSB		(2 << 5)
+#define MOD_SDF_MASK		(3 << 5)
+#define MOD_RCLK_256FS		(0 << 3)
+#define MOD_RCLK_512FS		(1 << 3)
+#define MOD_RCLK_384FS		(2 << 3)
+#define MOD_RCLK_768FS		(3 << 3)
+#define MOD_RCLK_MASK		(3 << 3)
+#define MOD_BCLK_32FS		(0 << 1)
+#define MOD_BCLK_48FS		(1 << 1)
+#define MOD_BCLK_16FS		(2 << 1)
+#define MOD_BCLK_24FS		(3 << 1)
+#define MOD_BCLK_MASK		(3 << 1)
+#define MOD_8BIT		(1 << 0)
+
+#define MOD_CDCLKCON		(1 << 12)
+
+#define PSR_PSREN		(1 << 15)
+
+#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
+#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
+
+#define FIC_TXFLUSH		(1 << 15)
+#define FIC_RXFLUSH		(1 << 7)
+
+#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
+#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
+#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
+
+#define AHB_INTENLVL0		(1 << 24)
+#define AHB_LVL0INT		(1 << 20)
+#define AHB_CLRLVL0INT		(1 << 16)
+#define AHB_DMARLD		(1 << 5)
+#define AHB_INTMASK		(1 << 3)
+#define AHB_DMAEN		(1 << 0)
+#define AHB_LVLINTMASK		(0xf << 20)
+
+#define I2SSIZE_TRNMSK		(0xffff)
+#define I2SSIZE_SHIFT		(16)
+
+#endif /* __SND_SOC_SAMSUNG_I2S_REGS_H */
+
+

sound/soc/samsung/i2s.h

@@ -0,0 +1,22 @@
+/* sound/soc/samsung/i2s.h
+ *
+ * ALSA SoC Audio Layer - Samsung I2S Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassisinghbrar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_I2S_H
+#define __SND_SOC_SAMSUNG_I2S_H
+
+#define SAMSUNG_I2S_DIV_BCLK	1
+
+#define SAMSUNG_I2S_RCLKSRC_0	0
+#define SAMSUNG_I2S_RCLKSRC_1	1
+#define SAMSUNG_I2S_CDCLK		2
+
+#endif /* __SND_SOC_SAMSUNG_I2S_H */

sound/soc/samsung/idma.c

@@ -0,0 +1,451 @@
+/*
+ * sound/soc/samsung/idma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * I2S0's Internal DMA driver
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "i2s.h"
+#include "idma.h"
+#include "dma.h"
+#include "i2s-regs.h"
+
+#define ST_RUNNING		(1<<0)
+#define ST_OPENED		(1<<1)
+
+static const struct snd_pcm_hardware idma_hardware = {
+	.info = SNDRV_PCM_INFO_INTERLEAVED |
+		    SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		    SNDRV_PCM_INFO_MMAP |
+		    SNDRV_PCM_INFO_MMAP_VALID |
+		    SNDRV_PCM_INFO_PAUSE |
+		    SNDRV_PCM_INFO_RESUME,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE |
+		    SNDRV_PCM_FMTBIT_U16_LE |
+		    SNDRV_PCM_FMTBIT_S24_LE |
+		    SNDRV_PCM_FMTBIT_U24_LE |
+		    SNDRV_PCM_FMTBIT_U8 |
+		    SNDRV_PCM_FMTBIT_S8,
+	.channels_min = 2,
+	.channels_max = 2,
+	.buffer_bytes_max = MAX_IDMA_BUFFER,
+	.period_bytes_min = 128,
+	.period_bytes_max = MAX_IDMA_PERIOD,
+	.periods_min = 1,
+	.periods_max = 2,
+};
+
+struct idma_ctrl {
+	spinlock_t	lock;
+	int		state;
+	dma_addr_t	start;
+	dma_addr_t	pos;
+	dma_addr_t	end;
+	dma_addr_t	period;
+	dma_addr_t	periodsz;
+	void		*token;
+	void		(*cb)(void *dt, int bytes_xfer);
+};
+
+static struct idma_info {
+	spinlock_t	lock;
+	void		 __iomem  *regs;
+	dma_addr_t	lp_tx_addr;
+} idma;
+
+static int idma_irq;
+
+static void idma_getpos(dma_addr_t *src)
+{
+	*src = idma.lp_tx_addr +
+		(readl(idma.regs + I2STRNCNT) & 0xffffff) * 4;
+}
+
+static int idma_enqueue(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+	u32 val;
+
+	spin_lock(&prtd->lock);
+	prtd->token = (void *) substream;
+	spin_unlock(&prtd->lock);
+
+	/* Internal DMA Level0 Interrupt Address */
+	val = idma.lp_tx_addr + prtd->periodsz;
+	writel(val, idma.regs + I2SLVL0ADDR);
+
+	/* Start address0 of I2S internal DMA operation. */
+	val = idma.lp_tx_addr;
+	writel(val, idma.regs + I2SSTR0);
+
+	/*
+	 * Transfer block size for I2S internal DMA.
+	 * Should decide transfer size before start dma operation
+	 */
+	val = readl(idma.regs + I2SSIZE);
+	val &= ~(I2SSIZE_TRNMSK << I2SSIZE_SHIFT);
+	val |= (((runtime->dma_bytes >> 2) &
+			I2SSIZE_TRNMSK) << I2SSIZE_SHIFT);
+	writel(val, idma.regs + I2SSIZE);
+
+	val = readl(idma.regs + I2SAHB);
+	val |= AHB_INTENLVL0;
+	writel(val, idma.regs + I2SAHB);
+
+	return 0;
+}
+
+static void idma_setcallbk(struct snd_pcm_substream *substream,
+				void (*cb)(void *, int))
+{
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+
+	spin_lock(&prtd->lock);
+	prtd->cb = cb;
+	spin_unlock(&prtd->lock);
+}
+
+static void idma_control(int op)
+{
+	u32 val = readl(idma.regs + I2SAHB);
+
+	spin_lock(&idma.lock);
+
+	switch (op) {
+	case LPAM_DMA_START:
+		val |= (AHB_INTENLVL0 | AHB_DMAEN);
+		break;
+	case LPAM_DMA_STOP:
+		val &= ~(AHB_INTENLVL0 | AHB_DMAEN);
+		break;
+	default:
+		spin_unlock(&idma.lock);
+		return;
+	}
+
+	writel(val, idma.regs + I2SAHB);
+	spin_unlock(&idma.lock);
+}
+
+static void idma_done(void *id, int bytes_xfer)
+{
+	struct snd_pcm_substream *substream = id;
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+
+	if (prtd && (prtd->state & ST_RUNNING))
+		snd_pcm_period_elapsed(substream);
+}
+
+static int idma_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+	u32 mod = readl(idma.regs + I2SMOD);
+	u32 ahb = readl(idma.regs + I2SAHB);
+
+	ahb |= (AHB_DMARLD | AHB_INTMASK);
+	mod |= MOD_TXS_IDMA;
+	writel(ahb, idma.regs + I2SAHB);
+	writel(mod, idma.regs + I2SMOD);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	prtd->start = prtd->pos = runtime->dma_addr;
+	prtd->period = params_periods(params);
+	prtd->periodsz = params_period_bytes(params);
+	prtd->end = runtime->dma_addr + runtime->dma_bytes;
+
+	idma_setcallbk(substream, idma_done);
+
+	return 0;
+}
+
+static int idma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	return 0;
+}
+
+static int idma_prepare(struct snd_pcm_substream *substream)
+{
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+
+	prtd->pos = prtd->start;
+
+	/* flush the DMA channel */
+	idma_control(LPAM_DMA_STOP);
+	idma_enqueue(substream);
+
+	return 0;
+}
+
+static int idma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct idma_ctrl *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	spin_lock(&prtd->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		prtd->state |= ST_RUNNING;
+		idma_control(LPAM_DMA_START);
+		break;
+
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		prtd->state &= ~ST_RUNNING;
+		idma_control(LPAM_DMA_STOP);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&prtd->lock);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t
+	idma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct idma_ctrl *prtd = runtime->private_data;
+	dma_addr_t src;
+	unsigned long res;
+
+	spin_lock(&prtd->lock);
+
+	idma_getpos(&src);
+	res = src - prtd->start;
+
+	spin_unlock(&prtd->lock);
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int idma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	unsigned long size, offset;
+	int ret;
+
+	/* From snd_pcm_lib_mmap_iomem */
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	vma->vm_flags |= VM_IO;
+	size = vma->vm_end - vma->vm_start;
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+	ret = io_remap_pfn_range(vma, vma->vm_start,
+			(runtime->dma_addr + offset) >> PAGE_SHIFT,
+			size, vma->vm_page_prot);
+
+	return ret;
+}
+
+static irqreturn_t iis_irq(int irqno, void *dev_id)
+{
+	struct idma_ctrl *prtd = (struct idma_ctrl *)dev_id;
+	u32 iiscon, iisahb, val, addr;
+
+	iisahb  = readl(idma.regs + I2SAHB);
+	iiscon  = readl(idma.regs + I2SCON);
+
+	val = (iisahb & AHB_LVL0INT) ? AHB_CLRLVL0INT : 0;
+
+	if (val) {
+		iisahb |= val;
+		writel(iisahb, idma.regs + I2SAHB);
+
+		addr = readl(idma.regs + I2SLVL0ADDR) - idma.lp_tx_addr;
+		addr += prtd->periodsz;
+		addr %= (prtd->end - prtd->start);
+		addr += idma.lp_tx_addr;
+
+		writel(addr, idma.regs + I2SLVL0ADDR);
+
+		if (prtd->cb)
+			prtd->cb(prtd->token, prtd->period);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int idma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct idma_ctrl *prtd;
+	int ret;
+
+	snd_soc_set_runtime_hwparams(substream, &idma_hardware);
+
+	prtd = kzalloc(sizeof(struct idma_ctrl), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	ret = request_irq(idma_irq, iis_irq, 0, "i2s", prtd);
+	if (ret < 0) {
+		pr_err("fail to claim i2s irq , ret = %d\n", ret);
+		kfree(prtd);
+		return ret;
+	}
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+
+	return 0;
+}
+
+static int idma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct idma_ctrl *prtd = runtime->private_data;
+
+	free_irq(idma_irq, prtd);
+
+	if (!prtd)
+		pr_err("idma_close called with prtd == NULL\n");
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static struct snd_pcm_ops idma_ops = {
+	.open		= idma_open,
+	.close		= idma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.trigger	= idma_trigger,
+	.pointer	= idma_pointer,
+	.mmap		= idma_mmap,
+	.hw_params	= idma_hw_params,
+	.hw_free	= idma_hw_free,
+	.prepare	= idma_prepare,
+};
+
+static void idma_free(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+
+	substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+	if (!substream)
+		return;
+
+	buf = &substream->dma_buffer;
+	if (!buf->area)
+		return;
+
+	iounmap(buf->area);
+
+	buf->area = NULL;
+	buf->addr = 0;
+}
+
+static int preallocate_idma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+
+	/* Assign PCM buffer pointers */
+	buf->dev.type = SNDRV_DMA_TYPE_CONTINUOUS;
+	buf->addr = idma.lp_tx_addr;
+	buf->bytes = idma_hardware.buffer_bytes_max;
+	buf->area = (unsigned char *)ioremap(buf->addr, buf->bytes);
+
+	return 0;
+}
+
+static u64 idma_mask = DMA_BIT_MASK(32);
+
+static int idma_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret = 0;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &idma_mask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		ret = preallocate_idma_buffer(pcm,
+				SNDRV_PCM_STREAM_PLAYBACK);
+	}
+
+	return ret;
+}
+
+void idma_reg_addr_init(void __iomem *regs, dma_addr_t addr)
+{
+	spin_lock_init(&idma.lock);
+	idma.regs = regs;
+	idma.lp_tx_addr = addr;
+}
+EXPORT_SYMBOL_GPL(idma_reg_addr_init);
+
+static struct snd_soc_platform_driver asoc_idma_platform = {
+	.ops = &idma_ops,
+	.pcm_new = idma_new,
+	.pcm_free = idma_free,
+};
+
+static int asoc_idma_platform_probe(struct platform_device *pdev)
+{
+	idma_irq = platform_get_irq(pdev, 0);
+	if (idma_irq < 0)
+		return idma_irq;
+
+	return snd_soc_register_platform(&pdev->dev, &asoc_idma_platform);
+}
+
+static int asoc_idma_platform_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_platform(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver asoc_idma_driver = {
+	.driver = {
+		.name = "samsung-idma",
+		.owner = THIS_MODULE,
+	},
+
+	.probe = asoc_idma_platform_probe,
+	.remove = asoc_idma_platform_remove,
+};
+
+module_platform_driver(asoc_idma_driver);
+
+MODULE_AUTHOR("Jaswinder Singh, <jassisinghbrar@gmail.com>");
+MODULE_DESCRIPTION("Samsung ASoC IDMA Driver");
+MODULE_LICENSE("GPL");

sound/soc/samsung/idma.h

@@ -0,0 +1,26 @@
+/*
+ * sound/soc/samsung/idma.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __SND_SOC_SAMSUNG_IDMA_H_
+#define __SND_SOC_SAMSUNG_IDMA_H_
+
+extern void idma_reg_addr_init(void __iomem *regs, dma_addr_t addr);
+
+/* dma_state */
+#define LPAM_DMA_STOP	0
+#define LPAM_DMA_START	1
+
+#define MAX_IDMA_PERIOD (128 * 1024)
+#define MAX_IDMA_BUFFER (160 * 1024)
+
+#endif /* __SND_SOC_SAMSUNG_IDMA_H_ */

sound/soc/samsung/jive_wm8750.c

@@ -0,0 +1,174 @@
+/* sound/soc/samsung/jive_wm8750.c
+ *
+ * Copyright 2007,2008 Simtec Electronics
+ *
+ * Based on sound/soc/pxa/spitz.c
+ *	Copyright 2005 Wolfson Microelectronics PLC.
+ *	Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+
+#include "s3c2412-i2s.h"
+#include "../codecs/wm8750.h"
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{ "Headphone Jack", NULL, "LOUT1" },
+	{ "Headphone Jack", NULL, "ROUT1" },
+	{ "Internal Speaker", NULL, "LOUT2" },
+	{ "Internal Speaker", NULL, "ROUT2" },
+	{ "LINPUT1", NULL, "Line Input" },
+	{ "RINPUT1", NULL, "Line Input" },
+};
+
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Internal Speaker", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+};
+
+static int jive_hw_params(struct snd_pcm_substream *substream,
+			  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct s3c_i2sv2_rate_calc div;
+	unsigned int clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+				s3c_i2sv2_get_clock(cpu_dai));
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER,
+				     div.clk_div - 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops jive_ops = {
+	.hw_params	= jive_hw_params,
+};
+
+static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	/* These endpoints are not being used. */
+	snd_soc_dapm_nc_pin(dapm, "LINPUT2");
+	snd_soc_dapm_nc_pin(dapm, "RINPUT2");
+	snd_soc_dapm_nc_pin(dapm, "LINPUT3");
+	snd_soc_dapm_nc_pin(dapm, "RINPUT3");
+	snd_soc_dapm_nc_pin(dapm, "OUT3");
+	snd_soc_dapm_nc_pin(dapm, "MONO");
+
+	return 0;
+}
+
+static struct snd_soc_dai_link jive_dai = {
+	.name		= "wm8750",
+	.stream_name	= "WM8750",
+	.cpu_dai_name	= "s3c2412-i2s",
+	.codec_dai_name = "wm8750-hifi",
+	.platform_name	= "s3c2412-i2s",
+	.codec_name	= "wm8750.0-001a",
+	.init		= jive_wm8750_init,
+	.ops		= &jive_ops,
+};
+
+/* jive audio machine driver */
+static struct snd_soc_card snd_soc_machine_jive = {
+	.name		= "Jive",
+	.owner		= THIS_MODULE,
+	.dai_link	= &jive_dai,
+	.num_links	= 1,
+
+	.dapm_widgets	= wm8750_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
+	.dapm_routes	= audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
+static struct platform_device *jive_snd_device;
+
+static int __init jive_init(void)
+{
+	int ret;
+
+	if (!machine_is_jive())
+		return 0;
+
+	printk("JIVE WM8750 Audio support\n");
+
+	jive_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!jive_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(jive_snd_device, &snd_soc_machine_jive);
+	ret = platform_device_add(jive_snd_device);
+
+	if (ret)
+		platform_device_put(jive_snd_device);
+
+	return ret;
+}
+
+static void __exit jive_exit(void)
+{
+	platform_device_unregister(jive_snd_device);
+}
+
+module_init(jive_init);
+module_exit(jive_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Jive Audio support");
+MODULE_LICENSE("GPL");

sound/soc/samsung/littlemill.c

@@ -0,0 +1,341 @@
+/*
+ * Littlemill audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include "../codecs/wm8994.h"
+
+static int sample_rate = 44100;
+
+static int littlemill_set_bias_level(struct snd_soc_card *card,
+					  struct snd_soc_dapm_context *dapm,
+					  enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
+	int ret;
+
+	if (dapm->dev != aif1_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_PREPARE:
+		/*
+		 * If we've not already clocked things via hw_params()
+		 * then do so now, otherwise these are noops.
+		 */
+		if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
+			ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1,
+						  WM8994_FLL_SRC_MCLK2, 32768,
+						  sample_rate * 512);
+			if (ret < 0) {
+				pr_err("Failed to start FLL: %d\n", ret);
+				return ret;
+			}
+
+			ret = snd_soc_dai_set_sysclk(aif1_dai,
+						     WM8994_SYSCLK_FLL1,
+						     sample_rate * 512,
+						     SND_SOC_CLOCK_IN);
+			if (ret < 0) {
+				pr_err("Failed to set SYSCLK: %d\n", ret);
+				return ret;
+			}
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int littlemill_set_bias_level_post(struct snd_soc_card *card,
+					       struct snd_soc_dapm_context *dapm,
+					       enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
+	int ret;
+
+	if (dapm->dev != aif1_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+					     32768, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			pr_err("Failed to switch away from FLL1: %d\n", ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1,
+					  0, 0, 0);
+		if (ret < 0) {
+			pr_err("Failed to stop FLL1: %d\n", ret);
+			return ret;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	dapm->bias_level = level;
+
+	return 0;
+}
+
+static int littlemill_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	sample_rate = params_rate(params);
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1,
+				  WM8994_FLL_SRC_MCLK2, 32768,
+				  sample_rate * 512);
+	if (ret < 0) {
+		pr_err("Failed to start FLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai,
+				     WM8994_SYSCLK_FLL1,
+				     sample_rate * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		pr_err("Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops littlemill_ops = {
+	.hw_params = littlemill_hw_params,
+};
+
+static const struct snd_soc_pcm_stream baseband_params = {
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	.rate_min = 8000,
+	.rate_max = 8000,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static struct snd_soc_dai_link littlemill_dai[] = {
+	{
+		.name = "CPU",
+		.stream_name = "CPU",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8994-aif1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8994-codec",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ops = &littlemill_ops,
+	},
+	{
+		.name = "Baseband",
+		.stream_name = "Baseband",
+		.cpu_dai_name = "wm8994-aif2",
+		.codec_dai_name = "wm1250-ev1",
+		.codec_name = "wm1250-ev1.1-0027",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+		.params = &baseband_params,
+	},
+};
+
+static int bbclk_ev(struct snd_soc_dapm_widget *w,
+		    struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct snd_soc_dai *aif2_dai = card->rtd[1].cpu_dai;
+	int ret;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		ret = snd_soc_dai_set_pll(aif2_dai, WM8994_FLL2,
+					  WM8994_FLL_SRC_BCLK, 64 * 8000,
+					  8000 * 256);
+		if (ret < 0) {
+			pr_err("Failed to start FLL: %d\n", ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_FLL2,
+					     8000 * 256,
+					     SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			pr_err("Failed to set SYSCLK: %d\n", ret);
+			return ret;
+		}
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_MCLK2,
+					     32768, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			pr_err("Failed to switch away from FLL2: %d\n", ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_pll(aif2_dai, WM8994_FLL2,
+					  0, 0, 0);
+		if (ret < 0) {
+			pr_err("Failed to stop FLL2: %d\n", ret);
+			return ret;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new controls[] = {
+	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
+	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+
+	SND_SOC_DAPM_MIC("AMIC", NULL),
+	SND_SOC_DAPM_MIC("DMIC", NULL),
+
+	SND_SOC_DAPM_SUPPLY_S("Baseband Clock", -1, SND_SOC_NOPM, 0, 0,
+			      bbclk_ev,
+			      SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+	{ "Headphone", NULL, "HPOUT1L" },
+	{ "Headphone", NULL, "HPOUT1R" },
+
+	{ "AMIC", NULL, "MICBIAS1" },   /* Default for AMICBIAS jumper */
+	{ "IN1LN", NULL, "AMIC" },
+
+	{ "DMIC", NULL, "MICBIAS2" },   /* Default for DMICBIAS jumper */
+	{ "DMIC1DAT", NULL, "DMIC" },
+	{ "DMIC2DAT", NULL, "DMIC" },
+
+	{ "AIF2CLK", NULL, "Baseband Clock" },
+};
+
+static struct snd_soc_jack littlemill_headset;
+
+static int littlemill_late_probe(struct snd_soc_card *card)
+{
+	struct snd_soc_codec *codec = card->rtd[0].codec;
+	struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
+	struct snd_soc_dai *aif2_dai = card->rtd[1].cpu_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+				     32768, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_MCLK2,
+				     32768, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_jack_new(codec, "Headset",
+			       SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+			       SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+			       SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+			       SND_JACK_BTN_4 | SND_JACK_BTN_5,
+			       &littlemill_headset);
+	if (ret)
+		return ret;
+
+	/* This will check device compatibility itself */
+	wm8958_mic_detect(codec, &littlemill_headset, NULL, NULL, NULL, NULL);
+
+	/* As will this */
+	wm8994_mic_detect(codec, &littlemill_headset, 1);
+
+	return 0;
+}
+
+static struct snd_soc_card littlemill = {
+	.name = "Littlemill",
+	.owner = THIS_MODULE,
+	.dai_link = littlemill_dai,
+	.num_links = ARRAY_SIZE(littlemill_dai),
+
+	.set_bias_level = littlemill_set_bias_level,
+	.set_bias_level_post = littlemill_set_bias_level_post,
+
+	.controls = controls,
+	.num_controls = ARRAY_SIZE(controls),
+	.dapm_widgets = widgets,
+	.num_dapm_widgets = ARRAY_SIZE(widgets),
+	.dapm_routes = audio_paths,
+	.num_dapm_routes = ARRAY_SIZE(audio_paths),
+
+	.late_probe = littlemill_late_probe,
+};
+
+static int littlemill_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &littlemill;
+	int ret;
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int littlemill_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+static struct platform_driver littlemill_driver = {
+	.driver = {
+		.name = "littlemill",
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = littlemill_probe,
+	.remove = littlemill_remove,
+};
+
+module_platform_driver(littlemill_driver);
+
+MODULE_DESCRIPTION("Littlemill audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:littlemill");

sound/soc/samsung/ln2440sbc_alc650.c

@@ -0,0 +1,72 @@
+/*
+ * SoC audio for ln2440sbc
+ *
+ * Copyright 2007 KonekTel, a.s.
+ * Author: Ivan Kuten
+ *         ivan.kuten@promwad.com
+ *
+ * Heavily based on smdk2443_wm9710.c
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+static struct snd_soc_card ln2440sbc;
+
+static struct snd_soc_dai_link ln2440sbc_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "ac97-hifi",
+	.codec_name = "ac97-codec",
+	.platform_name = "samsung-ac97",
+},
+};
+
+static struct snd_soc_card ln2440sbc = {
+	.name = "LN2440SBC",
+	.owner = THIS_MODULE,
+	.dai_link = ln2440sbc_dai,
+	.num_links = ARRAY_SIZE(ln2440sbc_dai),
+};
+
+static struct platform_device *ln2440sbc_snd_ac97_device;
+
+static int __init ln2440sbc_init(void)
+{
+	int ret;
+
+	ln2440sbc_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!ln2440sbc_snd_ac97_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(ln2440sbc_snd_ac97_device, &ln2440sbc);
+	ret = platform_device_add(ln2440sbc_snd_ac97_device);
+
+	if (ret)
+		platform_device_put(ln2440sbc_snd_ac97_device);
+
+	return ret;
+}
+
+static void __exit ln2440sbc_exit(void)
+{
+	platform_device_unregister(ln2440sbc_snd_ac97_device);
+}
+
+module_init(ln2440sbc_init);
+module_exit(ln2440sbc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ivan Kuten");
+MODULE_DESCRIPTION("ALSA SoC ALC650 LN2440SBC");
+MODULE_LICENSE("GPL");

sound/soc/samsung/lowland.c

@@ -0,0 +1,224 @@
+/*
+ * Lowland audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include "../codecs/wm5100.h"
+#include "../codecs/wm9081.h"
+
+#define MCLK1_RATE (44100 * 512)
+#define CLKOUT_RATE (44100 * 256)
+
+static struct snd_soc_jack lowland_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin lowland_headset_pins[] = {
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE | SND_JACK_LINEOUT,
+	},
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int ret;
+
+	ret = snd_soc_codec_set_sysclk(codec, WM5100_CLK_SYSCLK,
+				       WM5100_CLKSRC_MCLK1, MCLK1_RATE,
+				       SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		pr_err("Failed to set SYSCLK clock source: %d\n", ret);
+		return ret;
+	}
+
+	/* Clock OPCLK, used by the other audio components. */
+	ret = snd_soc_codec_set_sysclk(codec, WM5100_CLK_OPCLK, 0,
+				       CLKOUT_RATE, 0);
+	if (ret < 0) {
+		pr_err("Failed to set OPCLK rate: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_jack_new(codec, "Headset",
+			       SND_JACK_LINEOUT | SND_JACK_HEADSET |
+			       SND_JACK_BTN_0,
+			       &lowland_headset);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&lowland_headset,
+				    ARRAY_SIZE(lowland_headset_pins),
+				    lowland_headset_pins);
+	if (ret)
+		return ret;
+
+	wm5100_detect(codec, &lowland_headset);
+
+	return 0;
+}
+
+static int lowland_wm9081_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	snd_soc_dapm_nc_pin(&codec->dapm, "LINEOUT");
+
+	/* At any time the WM9081 is active it will have this clock */
+	return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,
+					CLKOUT_RATE, 0);
+}
+
+static const struct snd_soc_pcm_stream sub_params = {
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	.rate_min = 44100,
+	.rate_max = 44100,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static struct snd_soc_dai_link lowland_dai[] = {
+	{
+		.name = "CPU",
+		.stream_name = "CPU",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm5100-aif1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm5100.1-001a",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				SND_SOC_DAIFMT_CBM_CFM,
+		.init = lowland_wm5100_init,
+	},
+	{
+		.name = "Baseband",
+		.stream_name = "Baseband",
+		.cpu_dai_name = "wm5100-aif2",
+		.codec_dai_name = "wm1250-ev1",
+		.codec_name = "wm1250-ev1.1-0027",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "Sub Speaker",
+		.stream_name = "Sub Speaker",
+		.cpu_dai_name = "wm5100-aif3",
+		.codec_dai_name = "wm9081-hifi",
+		.codec_name = "wm9081.1-006c",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+		.params = &sub_params,
+		.init = lowland_wm9081_init,
+	},
+};
+
+static struct snd_soc_codec_conf lowland_codec_conf[] = {
+	{
+		.dev_name = "wm9081.1-006c",
+		.name_prefix = "Sub",
+	},
+};
+
+static const struct snd_kcontrol_new controls[] = {
+	SOC_DAPM_PIN_SWITCH("Main Speaker"),
+	SOC_DAPM_PIN_SWITCH("Main DMIC"),
+	SOC_DAPM_PIN_SWITCH("Main AMIC"),
+	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
+	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+	SND_SOC_DAPM_SPK("Main Speaker", NULL),
+
+	SND_SOC_DAPM_MIC("Main AMIC", NULL),
+	SND_SOC_DAPM_MIC("Main DMIC", NULL),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+	{ "Sub IN1", NULL, "HPOUT2L" },
+	{ "Sub IN2", NULL, "HPOUT2R" },
+
+	{ "Main Speaker", NULL, "Sub SPKN" },
+	{ "Main Speaker", NULL, "Sub SPKP" },
+	{ "Main Speaker", NULL, "SPKDAT1" },
+};
+
+static struct snd_soc_card lowland = {
+	.name = "Lowland",
+	.owner = THIS_MODULE,
+	.dai_link = lowland_dai,
+	.num_links = ARRAY_SIZE(lowland_dai),
+	.codec_conf = lowland_codec_conf,
+	.num_configs = ARRAY_SIZE(lowland_codec_conf),
+
+	.controls = controls,
+	.num_controls = ARRAY_SIZE(controls),
+	.dapm_widgets = widgets,
+	.num_dapm_widgets = ARRAY_SIZE(widgets),
+	.dapm_routes = audio_paths,
+	.num_dapm_routes = ARRAY_SIZE(audio_paths),
+};
+
+static int lowland_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &lowland;
+	int ret;
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lowland_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+static struct platform_driver lowland_driver = {
+	.driver = {
+		.name = "lowland",
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = lowland_probe,
+	.remove = lowland_remove,
+};
+
+module_platform_driver(lowland_driver);
+
+MODULE_DESCRIPTION("Lowland audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lowland");

sound/soc/samsung/neo1973_wm8753.c

@@ -0,0 +1,471 @@
+/*
+ * neo1973_wm8753.c  --  SoC audio for Openmoko Neo1973 and Freerunner devices
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+#include "regs-iis.h"
+
+#include "../codecs/wm8753.h"
+#include "s3c24xx-i2s.h"
+
+static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 0, bclk = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+		pll_out = 12288000;
+		break;
+	case 48000:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 12288000;
+		break;
+	case 96000:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 12288000;
+		break;
+	case 11025:
+		bclk = WM8753_BCLK_DIV_16;
+		pll_out = 11289600;
+		break;
+	case 22050:
+		bclk = WM8753_BCLK_DIV_8;
+		pll_out = 11289600;
+		break;
+	case 44100:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 11289600;
+		break;
+	case 88200:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set codec BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(4, 4));
+	if (ret < 0)
+		return ret;
+
+	/* codec PLL input is PCLK/4 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
+		iis_clkrate / 4, pll_out);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_hifi_ops = {
+	.hw_params = neo1973_hifi_hw_params,
+	.hw_free = neo1973_hifi_hw_free,
+};
+
+static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pcmdiv = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+	if (params_channels(params) != 1)
+		return -EINVAL;
+
+	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+	/* todo: gg check mode (DSP_B) against CSR datasheet */
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set codec PCM division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv);
+	if (ret < 0)
+		return ret;
+
+	/* configure and enable PLL for 12.288MHz output */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
+		iis_clkrate / 4, 12288000);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_voice_ops = {
+	.hw_params = neo1973_voice_hw_params,
+	.hw_free = neo1973_voice_hw_free,
+};
+
+/* Shared routes and controls */
+
+static const struct snd_soc_dapm_widget neo1973_wm8753_dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line In", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Handset Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route neo1973_wm8753_routes[] = {
+	/* Connections to the GSM Module */
+	{"GSM Line Out", NULL, "MONO1"},
+	{"GSM Line Out", NULL, "MONO2"},
+	{"RXP", NULL, "GSM Line In"},
+	{"RXN", NULL, "GSM Line In"},
+
+	/* Connections to Headset */
+	{"MIC1", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Headset Mic"},
+
+	/* Call Mic */
+	{"MIC2", NULL, "Mic Bias"},
+	{"MIC2N", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Handset Mic"},
+
+	/* Connect the ALC pins */
+	{"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new neo1973_wm8753_controls[] = {
+	SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+	SOC_DAPM_PIN_SWITCH("GSM Line In"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Handset Mic"),
+};
+
+/* GTA02 specific routes and controls */
+
+static int gta02_speaker_enabled;
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	gta02_speaker_enabled = ucontrol->value.integer.value[0];
+
+	gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
+
+	return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = gta02_speaker_enabled;
+	return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int event)
+{
+	gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_route neo1973_gta02_routes[] = {
+	/* Connections to the amp */
+	{"Stereo Out", NULL, "LOUT1"},
+	{"Stereo Out", NULL, "ROUT1"},
+
+	/* Call Speaker */
+	{"Handset Spk", NULL, "LOUT2"},
+	{"Handset Spk", NULL, "ROUT2"},
+};
+
+static const struct snd_kcontrol_new neo1973_gta02_wm8753_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Handset Spk"),
+	SOC_DAPM_PIN_SWITCH("Stereo Out"),
+
+	SOC_SINGLE_BOOL_EXT("Amp Spk Switch", 0,
+		lm4853_get_spk,
+		lm4853_set_spk),
+};
+
+static const struct snd_soc_dapm_widget neo1973_gta02_wm8753_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Handset Spk", NULL),
+	SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+};
+
+static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
+{
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(dapm, neo1973_gta02_wm8753_dapm_widgets,
+			ARRAY_SIZE(neo1973_gta02_wm8753_dapm_widgets));
+	if (ret)
+		return ret;
+
+	ret = snd_soc_dapm_add_routes(dapm, neo1973_gta02_routes,
+			ARRAY_SIZE(neo1973_gta02_routes));
+	if (ret)
+		return ret;
+
+	ret = snd_soc_add_card_controls(codec->card, neo1973_gta02_wm8753_controls,
+			ARRAY_SIZE(neo1973_gta02_wm8753_controls));
+	if (ret)
+		return ret;
+
+	snd_soc_dapm_disable_pin(dapm, "Stereo Out");
+	snd_soc_dapm_disable_pin(dapm, "Handset Spk");
+	snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
+	snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
+
+	return 0;
+}
+
+static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int ret;
+
+	/* set up NC codec pins */
+	snd_soc_dapm_nc_pin(dapm, "OUT3");
+	snd_soc_dapm_nc_pin(dapm, "OUT4");
+	snd_soc_dapm_nc_pin(dapm, "LINE1");
+	snd_soc_dapm_nc_pin(dapm, "LINE2");
+
+	/* Add neo1973 specific widgets */
+	ret = snd_soc_dapm_new_controls(dapm, neo1973_wm8753_dapm_widgets,
+			ARRAY_SIZE(neo1973_wm8753_dapm_widgets));
+	if (ret)
+		return ret;
+
+	/* add neo1973 specific controls */
+	ret = snd_soc_add_card_controls(rtd->card, neo1973_wm8753_controls,
+			ARRAY_SIZE(neo1973_wm8753_controls));
+	if (ret)
+		return ret;
+
+	/* set up neo1973 specific audio routes */
+	ret = snd_soc_dapm_add_routes(dapm, neo1973_wm8753_routes,
+			ARRAY_SIZE(neo1973_wm8753_routes));
+	if (ret)
+		return ret;
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
+	snd_soc_dapm_disable_pin(dapm, "GSM Line In");
+	snd_soc_dapm_disable_pin(dapm, "Headset Mic");
+	snd_soc_dapm_disable_pin(dapm, "Handset Mic");
+
+	/* allow audio paths from the GSM modem to run during suspend */
+	snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out");
+	snd_soc_dapm_ignore_suspend(dapm, "GSM Line In");
+	snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(dapm, "Handset Mic");
+
+	if (machine_is_neo1973_gta02()) {
+		ret = neo1973_gta02_wm8753_init(codec);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_dai_link neo1973_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+	.name = "WM8753",
+	.stream_name = "WM8753 HiFi",
+	.platform_name = "s3c24xx-iis",
+	.cpu_dai_name = "s3c24xx-iis",
+	.codec_dai_name = "wm8753-hifi",
+	.codec_name = "wm8753.0-001a",
+	.init = neo1973_wm8753_init,
+	.ops = &neo1973_hifi_ops,
+},
+{ /* Voice via BT */
+	.name = "Bluetooth",
+	.stream_name = "Voice",
+	.cpu_dai_name = "dfbmcs320-pcm",
+	.codec_dai_name = "wm8753-voice",
+	.codec_name = "wm8753.0-001a",
+	.ops = &neo1973_voice_ops,
+},
+};
+
+static struct snd_soc_aux_dev neo1973_aux_devs[] = {
+	{
+		.name = "dfbmcs320",
+		.codec_name = "dfbmcs320.0",
+	},
+};
+
+static struct snd_soc_codec_conf neo1973_codec_conf[] = {
+	{
+		.dev_name = "lm4857.0-007c",
+		.name_prefix = "Amp",
+	},
+};
+
+static const struct gpio neo1973_gta02_gpios[] = {
+	{ S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+	{ S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+};
+
+static struct snd_soc_card neo1973 = {
+	.name = "neo1973",
+	.owner = THIS_MODULE,
+	.dai_link = neo1973_dai,
+	.num_links = ARRAY_SIZE(neo1973_dai),
+	.aux_dev = neo1973_aux_devs,
+	.num_aux_devs = ARRAY_SIZE(neo1973_aux_devs),
+	.codec_conf = neo1973_codec_conf,
+	.num_configs = ARRAY_SIZE(neo1973_codec_conf),
+};
+
+static struct platform_device *neo1973_snd_device;
+
+static int __init neo1973_init(void)
+{
+	int ret;
+
+	if (!machine_is_neo1973_gta02())
+		return -ENODEV;
+
+	if (machine_is_neo1973_gta02()) {
+		neo1973.name = "neo1973gta02";
+		neo1973.num_aux_devs = 1;
+
+		ret = gpio_request_array(neo1973_gta02_gpios,
+				ARRAY_SIZE(neo1973_gta02_gpios));
+		if (ret)
+			return ret;
+	}
+
+	neo1973_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!neo1973_snd_device) {
+		ret = -ENOMEM;
+		goto err_gpio_free;
+	}
+
+	platform_set_drvdata(neo1973_snd_device, &neo1973);
+	ret = platform_device_add(neo1973_snd_device);
+
+	if (ret)
+		goto err_put_device;
+
+	return 0;
+
+err_put_device:
+	platform_device_put(neo1973_snd_device);
+err_gpio_free:
+	if (machine_is_neo1973_gta02()) {
+		gpio_free_array(neo1973_gta02_gpios,
+				ARRAY_SIZE(neo1973_gta02_gpios));
+	}
+	return ret;
+}
+module_init(neo1973_init);
+
+static void __exit neo1973_exit(void)
+{
+	platform_device_unregister(neo1973_snd_device);
+
+	if (machine_is_neo1973_gta02()) {
+		gpio_free_array(neo1973_gta02_gpios,
+				ARRAY_SIZE(neo1973_gta02_gpios));
+	}
+}
+module_exit(neo1973_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 and Frerunner");
+MODULE_LICENSE("GPL");

sound/soc/samsung/pcm.c

@@ -0,0 +1,659 @@
+/* sound/soc/samsung/pcm.c
+ *
+ * ALSA SoC Audio Layer - S3C PCM-Controller driver
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassisinghbrar@gmail.com>
+ * based upon I2S drivers by Ben Dooks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <linux/platform_data/asoc-s3c.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+#include "pcm.h"
+
+/*Register Offsets */
+#define S3C_PCM_CTL		0x00
+#define S3C_PCM_CLKCTL		0x04
+#define S3C_PCM_TXFIFO		0x08
+#define S3C_PCM_RXFIFO		0x0C
+#define S3C_PCM_IRQCTL		0x10
+#define S3C_PCM_IRQSTAT		0x14
+#define S3C_PCM_FIFOSTAT	0x18
+#define S3C_PCM_CLRINT		0x20
+
+/* PCM_CTL Bit-Fields */
+#define S3C_PCM_CTL_TXDIPSTICK_MASK	0x3f
+#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	13
+#define S3C_PCM_CTL_RXDIPSTICK_MASK	0x3f
+#define S3C_PCM_CTL_RXDIPSTICK_SHIFT	7
+#define S3C_PCM_CTL_TXDMA_EN		(0x1 << 6)
+#define S3C_PCM_CTL_RXDMA_EN		(0x1 << 5)
+#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1 << 4)
+#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1 << 3)
+#define S3C_PCM_CTL_TXFIFO_EN		(0x1 << 2)
+#define S3C_PCM_CTL_RXFIFO_EN		(0x1 << 1)
+#define S3C_PCM_CTL_ENABLE		(0x1 << 0)
+
+/* PCM_CLKCTL Bit-Fields */
+#define S3C_PCM_CLKCTL_SERCLK_EN	(0x1 << 19)
+#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1 << 18)
+#define S3C_PCM_CLKCTL_SCLKDIV_MASK	0x1ff
+#define S3C_PCM_CLKCTL_SYNCDIV_MASK	0x1ff
+#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	9
+#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	0
+
+/* PCM_TXFIFO Bit-Fields */
+#define S3C_PCM_TXFIFO_DVALID	(0x1 << 16)
+#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff << 0)
+
+/* PCM_RXFIFO Bit-Fields */
+#define S3C_PCM_RXFIFO_DVALID	(0x1 << 16)
+#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff << 0)
+
+/* PCM_IRQCTL Bit-Fields */
+#define S3C_PCM_IRQCTL_IRQEN		(0x1 << 14)
+#define S3C_PCM_IRQCTL_WRDEN		(0x1 << 12)
+#define S3C_PCM_IRQCTL_TXEMPTYEN	(0x1 << 11)
+#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1 << 10)
+#define S3C_PCM_IRQCTL_TXFULLEN		(0x1 << 9)
+#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1 << 8)
+#define S3C_PCM_IRQCTL_TXSTARVEN	(0x1 << 7)
+#define S3C_PCM_IRQCTL_TXERROVRFLEN	(0x1 << 6)
+#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1 << 5)
+#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1 << 4)
+#define S3C_PCM_IRQCTL_RXFULLEN		(0x1 << 3)
+#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1 << 2)
+#define S3C_PCM_IRQCTL_RXSTARVEN	(0x1 << 1)
+#define S3C_PCM_IRQCTL_RXERROVRFLEN	(0x1 << 0)
+
+/* PCM_IRQSTAT Bit-Fields */
+#define S3C_PCM_IRQSTAT_IRQPND		(0x1 << 13)
+#define S3C_PCM_IRQSTAT_WRD_XFER	(0x1 << 12)
+#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1 << 11)
+#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1 << 10)
+#define S3C_PCM_IRQSTAT_TXFULL		(0x1 << 9)
+#define S3C_PCM_IRQSTAT_TXALMSTFULL	(0x1 << 8)
+#define S3C_PCM_IRQSTAT_TXSTARV		(0x1 << 7)
+#define S3C_PCM_IRQSTAT_TXERROVRFL	(0x1 << 6)
+#define S3C_PCM_IRQSTAT_RXEMPT		(0x1 << 5)
+#define S3C_PCM_IRQSTAT_RXALMSTEMPT	(0x1 << 4)
+#define S3C_PCM_IRQSTAT_RXFULL		(0x1 << 3)
+#define S3C_PCM_IRQSTAT_RXALMSTFULL	(0x1 << 2)
+#define S3C_PCM_IRQSTAT_RXSTARV		(0x1 << 1)
+#define S3C_PCM_IRQSTAT_RXERROVRFL	(0x1 << 0)
+
+/* PCM_FIFOSTAT Bit-Fields */
+#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f << 14)
+#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY		(0x1 << 13)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1 << 12)
+#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1 << 11)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1 << 10)
+#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f << 4)
+#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY		(0x1 << 3)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1 << 2)
+#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1 << 1)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1 << 0)
+
+/**
+ * struct s3c_pcm_info - S3C PCM Controller information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ */
+struct s3c_pcm_info {
+	spinlock_t lock;
+	struct device	*dev;
+	void __iomem	*regs;
+
+	unsigned int sclk_per_fs;
+
+	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
+	unsigned int idleclk;
+
+	struct clk	*pclk;
+	struct clk	*cclk;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+};
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
+	.name		= "PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
+	.name		= "PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_out[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_in[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_pcm_info s3c_pcm[2];
+
+static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl = readl(regs + S3C_PCM_CTL);
+	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
+			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_TXDMA_EN;
+		ctl |= S3C_PCM_CTL_TXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	ctl = readl(regs + S3C_PCM_CTL);
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK
+			 << S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_RXDMA_EN;
+		ctl |= S3C_PCM_CTL_RXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 1);
+		else
+			s3c_pcm_snd_txctrl(pcm, 1);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 0);
+		else
+			s3c_pcm_snd_txctrl(pcm, 0);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct s3c_dma_params *dma_data;
+	void __iomem *regs = pcm->regs;
+	struct clk *clk;
+	int sclk_div, sync_div;
+	unsigned long flags;
+	u32 clkctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = pcm->dma_playback;
+	else
+		dma_data = pcm->dma_capture;
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	/* Strictly check for sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	/* Get hold of the PCMSOURCE_CLK */
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
+		clk = pcm->pclk;
+	else
+		clk = pcm->cclk;
+
+	/* Set the SCLK divider */
+	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
+					params_rate(params) / 2 - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+
+	/* Set the SYNC divider */
+	sync_div = pcm->sclk_per_fs - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
+				clk_get_rate(clk), pcm->sclk_per_fs,
+				sclk_div, sync_div);
+
+	return 0;
+}
+
+static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	ctl = readl(regs + S3C_PCM_CTL);
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_NF:
+		/* Nothing to do, IB_NF by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported clock inversion!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Nothing to do, Master by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported master/slave format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
+	case SND_SOC_DAIFMT_CONT:
+		pcm->idleclk = 1;
+		break;
+	case SND_SOC_DAIFMT_GATED:
+		pcm->idleclk = 0;
+		break;
+	default:
+		dev_err(pcm->dev, "Invalid Clock gating request!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported data format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	writel(ctl, regs + S3C_PCM_CTL);
+
+exit:
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	return ret;
+}
+
+static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
+						int div_id, int div)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (div_id) {
+	case S3C_PCM_SCLK_PER_FS:
+		pcm->sclk_per_fs = div;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
+
+	switch (clk_id) {
+	case S3C_PCM_CLKSRC_PCLK:
+		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+		break;
+
+	case S3C_PCM_CLKSRC_MUX:
+		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+
+		if (clk_get_rate(pcm->cclk) != freq)
+			clk_set_rate(pcm->cclk, freq);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops s3c_pcm_dai_ops = {
+	.set_sysclk	= s3c_pcm_set_sysclk,
+	.set_clkdiv	= s3c_pcm_set_clkdiv,
+	.trigger	= s3c_pcm_trigger,
+	.hw_params	= s3c_pcm_hw_params,
+	.set_fmt	= s3c_pcm_set_fmt,
+};
+
+#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
+
+#define S3C_PCM_DAI_DECLARE			\
+	.symmetric_rates = 1,					\
+	.ops = &s3c_pcm_dai_ops,				\
+	.playback = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	},							\
+	.capture = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	}
+
+static struct snd_soc_dai_driver s3c_pcm_dai[] = {
+	[0] = {
+		.name	= "samsung-pcm.0",
+		S3C_PCM_DAI_DECLARE,
+	},
+	[1] = {
+		.name	= "samsung-pcm.1",
+		S3C_PCM_DAI_DECLARE,
+	},
+};
+
+static const struct snd_soc_component_driver s3c_pcm_component = {
+	.name		= "s3c-pcm",
+};
+
+static int s3c_pcm_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm;
+	struct resource *mem_res, *dmatx_res, *dmarx_res;
+	struct s3c_audio_pdata *pcm_pdata;
+	int ret;
+
+	/* Check for valid device index */
+	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	pcm_pdata = pdev->dev.platform_data;
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		return -EINVAL;
+	}
+
+	pcm = &s3c_pcm[pdev->id];
+	pcm->dev = &pdev->dev;
+
+	spin_lock_init(&pcm->lock);
+
+	/* Default is 128fs */
+	pcm->sclk_per_fs = 128;
+
+	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(pcm->cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(pcm->cclk);
+		goto err1;
+	}
+	clk_prepare_enable(pcm->cclk);
+
+	/* record our pcm structure for later use in the callbacks */
+	dev_set_drvdata(&pdev->dev, pcm);
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-pcm")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	pcm->regs = ioremap(mem_res->start, 0x100);
+	if (pcm->regs == NULL) {
+		dev_err(&pdev->dev, "cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	pcm->pclk = clk_get(&pdev->dev, "pcm");
+	if (IS_ERR(pcm->pclk)) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		ret = -ENOENT;
+		goto err4;
+	}
+	clk_prepare_enable(pcm->pclk);
+
+	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_RXFIFO;
+	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_TXFIFO;
+
+	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
+	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
+
+	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
+	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = snd_soc_register_component(&pdev->dev, &s3c_pcm_component,
+					 &s3c_pcm_dai[pdev->id], 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret);
+		goto err5;
+	}
+
+	ret = asoc_dma_platform_register(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get register DMA: %d\n", ret);
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	snd_soc_unregister_component(&pdev->dev);
+err5:
+	clk_disable_unprepare(pcm->pclk);
+	clk_put(pcm->pclk);
+err4:
+	iounmap(pcm->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable_unprepare(pcm->cclk);
+	clk_put(pcm->cclk);
+err1:
+	return ret;
+}
+
+static int s3c_pcm_dev_remove(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
+	struct resource *mem_res;
+
+	asoc_dma_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	iounmap(pcm->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable_unprepare(pcm->cclk);
+	clk_disable_unprepare(pcm->pclk);
+	clk_put(pcm->pclk);
+	clk_put(pcm->cclk);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pcm_driver = {
+	.probe  = s3c_pcm_dev_probe,
+	.remove = s3c_pcm_dev_remove,
+	.driver = {
+		.name = "samsung-pcm",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(s3c_pcm_driver);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassisinghbrar@gmail.com>");
+MODULE_DESCRIPTION("S3C PCM Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-pcm");

sound/soc/samsung/pcm.h

@@ -0,0 +1,17 @@
+/*  sound/soc/samsung/pcm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __S3C_PCM_H
+#define __S3C_PCM_H __FILE__
+
+#define S3C_PCM_CLKSRC_PCLK	0
+#define S3C_PCM_CLKSRC_MUX	1
+
+#define S3C_PCM_SCLK_PER_FS	0
+
+#endif /* __S3C_PCM_H */

sound/soc/samsung/regs-ac97.h

@@ -0,0 +1,67 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
+ *
+ * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 AC97 Controller
+*/
+
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H __FILE__
+
+#define S3C_AC97_GLBCTRL				(0x00)
+
+#define S3C_AC97_GLBCTRL_CODECREADYIE			(1<<22)
+#define S3C_AC97_GLBCTRL_PCMOUTURIE			(1<<21)
+#define S3C_AC97_GLBCTRL_PCMINORIE			(1<<20)
+#define S3C_AC97_GLBCTRL_MICINORIE			(1<<19)
+#define S3C_AC97_GLBCTRL_PCMOUTTIE			(1<<18)
+#define S3C_AC97_GLBCTRL_PCMINTIE			(1<<17)
+#define S3C_AC97_GLBCTRL_MICINTIE			(1<<16)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF			(0<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO			(1<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA			(2<<12)
+#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK			(3<<12)
+#define S3C_AC97_GLBCTRL_PCMINTM_OFF			(0<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_PIO			(1<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_DMA			(2<<10)
+#define S3C_AC97_GLBCTRL_PCMINTM_MASK			(3<<10)
+#define S3C_AC97_GLBCTRL_MICINTM_OFF			(0<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_PIO			(1<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_DMA			(2<<8)
+#define S3C_AC97_GLBCTRL_MICINTM_MASK			(3<<8)
+#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE		(1<<3)
+#define S3C_AC97_GLBCTRL_ACLINKON			(1<<2)
+#define S3C_AC97_GLBCTRL_WARMRESET			(1<<1)
+#define S3C_AC97_GLBCTRL_COLDRESET			(1<<0)
+
+#define S3C_AC97_GLBSTAT				(0x04)
+
+#define S3C_AC97_GLBSTAT_CODECREADY			(1<<22)
+#define S3C_AC97_GLBSTAT_PCMOUTUR			(1<<21)
+#define S3C_AC97_GLBSTAT_PCMINORI			(1<<20)
+#define S3C_AC97_GLBSTAT_MICINORI			(1<<19)
+#define S3C_AC97_GLBSTAT_PCMOUTTI			(1<<18)
+#define S3C_AC97_GLBSTAT_PCMINTI			(1<<17)
+#define S3C_AC97_GLBSTAT_MICINTI			(1<<16)
+#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE			(0<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_INIT			(1<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_READY		(2<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE		(3<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_LP			(4<<0)
+#define S3C_AC97_GLBSTAT_MAINSTATE_WARM			(5<<0)
+
+#define S3C_AC97_CODEC_CMD				(0x08)
+
+#define S3C_AC97_CODEC_CMD_READ				(1<<23)
+
+#define S3C_AC97_STAT					(0x0c)
+#define S3C_AC97_PCM_ADDR				(0x10)
+#define S3C_AC97_PCM_DATA				(0x18)
+#define S3C_AC97_MIC_DATA				(0x1C)
+
+#endif /* __ASM_ARCH_REGS_AC97_H */

sound/soc/samsung/regs-i2s-v2.h

@@ -0,0 +1,115 @@
+/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+ *
+ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+#define __ASM_ARCH_REGS_S3C2412_IIS_H
+
+#define S3C2412_IISCON			(0x00)
+#define S3C2412_IISMOD			(0x04)
+#define S3C2412_IISFIC			(0x08)
+#define S3C2412_IISPSR			(0x0C)
+#define S3C2412_IISTXD			(0x10)
+#define S3C2412_IISRXD			(0x14)
+
+#define S5PC1XX_IISFICS		0x18
+#define S5PC1XX_IISTXDS		0x1C
+
+#define S5PC1XX_IISCON_SW_RST		(1 << 31)
+#define S5PC1XX_IISCON_FRXOFSTATUS	(1 << 26)
+#define S5PC1XX_IISCON_FRXORINTEN	(1 << 25)
+#define S5PC1XX_IISCON_FTXSURSTAT	(1 << 24)
+#define S5PC1XX_IISCON_FTXSURINTEN	(1 << 23)
+#define S5PC1XX_IISCON_TXSDMAPAUSE	(1 << 20)
+#define S5PC1XX_IISCON_TXSDMACTIVE	(1 << 18)
+
+#define S3C64XX_IISCON_FTXURSTATUS	(1 << 17)
+#define S3C64XX_IISCON_FTXURINTEN	(1 << 16)
+#define S3C64XX_IISCON_TXFIFO2_EMPTY	(1 << 15)
+#define S3C64XX_IISCON_TXFIFO1_EMPTY	(1 << 14)
+#define S3C64XX_IISCON_TXFIFO2_FULL	(1 << 13)
+#define S3C64XX_IISCON_TXFIFO1_FULL	(1 << 12)
+
+#define S3C2412_IISCON_LRINDEX		(1 << 11)
+#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
+#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
+#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
+#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
+#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
+#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
+#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
+#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
+#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
+#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
+#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
+
+#define S5PC1XX_IISMOD_OPCLK_CDCLK_OUT	(0 << 30)
+#define S5PC1XX_IISMOD_OPCLK_CDCLK_IN	(1 << 30)
+#define S5PC1XX_IISMOD_OPCLK_BCLK_OUT	(2 << 30)
+#define S5PC1XX_IISMOD_OPCLK_PCLK	(3 << 30)
+#define S5PC1XX_IISMOD_OPCLK_MASK	(3 << 30)
+#define S5PC1XX_IISMOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
+#define S5PC1XX_IISMOD_BLCS_MASK	0x3
+#define S5PC1XX_IISMOD_BLCS_SHIFT	26
+#define S5PC1XX_IISMOD_BLCP_MASK	0x3
+#define S5PC1XX_IISMOD_BLCP_SHIFT	24
+
+#define S3C64XX_IISMOD_C2DD_HHALF	(1 << 21) /* Discard Higher-half */
+#define S3C64XX_IISMOD_C2DD_LHALF	(1 << 20) /* Discard Lower-half */
+#define S3C64XX_IISMOD_C1DD_HHALF	(1 << 19)
+#define S3C64XX_IISMOD_C1DD_LHALF	(1 << 18)
+#define S3C64XX_IISMOD_DC2_EN		(1 << 17)
+#define S3C64XX_IISMOD_DC1_EN		(1 << 16)
+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
+#define S3C2412_IISMOD_IMS_SYSMUX	(1 << 10)
+#define S3C2412_IISMOD_SLAVE		(1 << 11)
+#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
+#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
+#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
+#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
+#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
+#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
+#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
+#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
+#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
+#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
+#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
+#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
+#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
+#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
+#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
+#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
+#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
+#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
+#define S3C2412_IISMOD_8BIT		(1 << 0)
+
+#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
+
+#define S3C2412_IISPSR_PSREN		(1 << 15)
+
+#define S3C64XX_IISFIC_TX2COUNT(x)	(((x) >>  24) & 0xf)
+#define S3C64XX_IISFIC_TX1COUNT(x)	(((x) >>  16) & 0xf)
+
+#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
+#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
+#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
+#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
+
+#define S5PC1XX_IISFICS_TXFLUSH		(1 << 15)
+#define S5PC1XX_IISFICS_TXCOUNT(x)	(((x) >>  8) & 0x7f)
+
+#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */

sound/soc/samsung/regs-iis.h

@@ -0,0 +1,70 @@
+/* arch/arm/plat-samsung/include/plat/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON			(0x00)
+
+#define S3C2410_IISCON_LRINDEX		(1 << 8)
+#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
+#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
+#define S3C2410_IISCON_TXDMAEN		(1 << 5)
+#define S3C2410_IISCON_RXDMAEN		(1 << 4)
+#define S3C2410_IISCON_TXIDLE		(1 << 3)
+#define S3C2410_IISCON_RXIDLE		(1 << 2)
+#define S3C2410_IISCON_PSCEN		(1 << 1)
+#define S3C2410_IISCON_IISEN		(1 << 0)
+
+#define S3C2410_IISMOD			(0x04)
+
+#define S3C2440_IISMOD_MPLL		(1 << 9)
+#define S3C2410_IISMOD_SLAVE		(1 << 8)
+#define S3C2410_IISMOD_NOXFER		(0 << 6)
+#define S3C2410_IISMOD_RXMODE		(1 << 6)
+#define S3C2410_IISMOD_TXMODE		(2 << 6)
+#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
+#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
+#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
+#define S3C2410_IISMOD_IIS		(0 << 4)
+#define S3C2410_IISMOD_MSB		(1 << 4)
+#define S3C2410_IISMOD_8BIT		(0 << 3)
+#define S3C2410_IISMOD_16BIT		(1 << 3)
+#define S3C2410_IISMOD_BITMASK		(1 << 3)
+#define S3C2410_IISMOD_256FS		(0 << 2)
+#define S3C2410_IISMOD_384FS		(1 << 2)
+#define S3C2410_IISMOD_16FS		(0 << 0)
+#define S3C2410_IISMOD_32FS		(1 << 0)
+#define S3C2410_IISMOD_48FS		(2 << 0)
+#define S3C2410_IISMOD_FS_MASK		(3 << 0)
+
+#define S3C2410_IISPSR			(0x08)
+
+#define S3C2410_IISPSR_INTMASK		(31 << 5)
+#define S3C2410_IISPSR_INTSHIFT		(5)
+#define S3C2410_IISPSR_EXTMASK		(31 << 0)
+#define S3C2410_IISPSR_EXTSHFIT		(0)
+
+#define S3C2410_IISFCON			(0x0c)
+
+#define S3C2410_IISFCON_TXDMA		(1 << 15)
+#define S3C2410_IISFCON_RXDMA		(1 << 14)
+#define S3C2410_IISFCON_TXENABLE	(1 << 13)
+#define S3C2410_IISFCON_RXENABLE	(1 << 12)
+#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT		(6)
+#define S3C2410_IISFCON_RXMASK		(0x3f)
+#define S3C2410_IISFCON_RXSHIFT		(0)
+
+#define S3C2410_IISFIFO			(0x10)
+
+#endif /* __ASM_ARCH_REGS_IIS_H */

sound/soc/samsung/rx1950_uda1380.c

@@ -0,0 +1,301 @@
+/*
+ * rx1950.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * Based on smdk2440.c and magician.c
+ *
+ * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *          Philipp Zabel <philipp.zabel@gmail.com>
+ *          Denis Grigoriev <dgreenday@gmail.com>
+ *          Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "regs-iis.h"
+#include <asm/mach-types.h>
+
+#include "s3c24xx-i2s.h"
+
+static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
+static int rx1950_startup(struct snd_pcm_substream *substream);
+static int rx1950_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params);
+static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event);
+
+static unsigned int rates[] = {
+	16000,
+	44100,
+	48000,
+};
+
+static struct snd_pcm_hw_constraint_list hw_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0,
+};
+
+static struct snd_soc_jack hp_jack;
+
+static struct snd_soc_jack_pin hp_jack_pins[] = {
+	{
+		.pin	= "Headphone Jack",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+		.invert	= 1,
+	},
+};
+
+static struct snd_soc_jack_gpio hp_jack_gpios[] = {
+	[0] = {
+		.gpio			= S3C2410_GPG(12),
+		.name			= "hp-gpio",
+		.report			= SND_JACK_HEADPHONE,
+		.invert			= 1,
+		.debounce_time		= 200,
+	},
+};
+
+static struct snd_soc_ops rx1950_ops = {
+	.startup	= rx1950_startup,
+	.hw_params	= rx1950_hw_params,
+};
+
+/* s3c24xx digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
+	{
+		.name		= "uda1380",
+		.stream_name	= "UDA1380 Duplex",
+		.cpu_dai_name	= "s3c24xx-iis",
+		.codec_dai_name	= "uda1380-hifi",
+		.init		= rx1950_uda1380_init,
+		.platform_name	= "s3c24xx-iis",
+		.codec_name	= "uda1380-codec.0-001a",
+		.ops		= &rx1950_ops,
+	},
+};
+
+/* rx1950 machine dapm widgets */
+static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
+};
+
+/* rx1950 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* headphone connected to VOUTLHP, VOUTRHP */
+	{"Headphone Jack", NULL, "VOUTLHP"},
+	{"Headphone Jack", NULL, "VOUTRHP"},
+
+	/* ext speaker connected to VOUTL, VOUTR  */
+	{"Speaker", NULL, "VOUTL"},
+	{"Speaker", NULL, "VOUTR"},
+
+	/* mic is connected to VINM */
+	{"VINM", NULL, "Mic Jack"},
+};
+
+static struct snd_soc_card rx1950_asoc = {
+	.name = "rx1950",
+	.owner = THIS_MODULE,
+	.dai_link = rx1950_uda1380_dai,
+	.num_links = ARRAY_SIZE(rx1950_uda1380_dai),
+
+	.dapm_widgets = uda1380_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
+static struct platform_device *s3c24xx_snd_device;
+
+static int rx1950_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	runtime->hw.rate_min = hw_rates.list[0];
+	runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
+	runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
+
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					SNDRV_PCM_HW_PARAM_RATE,
+					&hw_rates);
+}
+
+static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event)
+{
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		gpio_set_value(S3C2410_GPA(1), 1);
+	else
+		gpio_set_value(S3C2410_GPA(1), 0);
+
+	return 0;
+}
+
+static int rx1950_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int div;
+	int ret;
+	unsigned int rate = params_rate(params);
+	int clk_source, fs_mode;
+
+	switch (rate) {
+	case 16000:
+	case 48000:
+		clk_source = S3C24XX_CLKSRC_PCLK;
+		fs_mode = S3C2410_IISMOD_256FS;
+		div = s3c24xx_i2s_get_clockrate() / (256 * rate);
+		if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
+			div++;
+		break;
+	case 44100:
+	case 88200:
+		clk_source = S3C24XX_CLKSRC_MPLL;
+		fs_mode = S3C2410_IISMOD_384FS;
+		div = 1;
+		break;
+	default:
+		printk(KERN_ERR "%s: rate %d is not supported\n",
+			__func__, rate);
+		return -EINVAL;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* select clock source */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
+			SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		fs_mode);
+	if (ret < 0)
+		return ret;
+
+	/* set BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(div, div));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int err;
+
+	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
+	snd_soc_dapm_enable_pin(dapm, "Speaker");
+	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
+
+	snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
+		&hp_jack);
+
+	snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
+		hp_jack_pins);
+
+	snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+
+	return 0;
+}
+
+static int __init rx1950_init(void)
+{
+	int ret;
+
+	if (!machine_is_rx1950())
+		return -ENODEV;
+
+	/* configure some gpios */
+	ret = gpio_request(S3C2410_GPA(1), "speaker-power");
+	if (ret)
+		goto err_gpio;
+
+	ret = gpio_direction_output(S3C2410_GPA(1), 0);
+	if (ret)
+		goto err_gpio_conf;
+
+	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s3c24xx_snd_device) {
+		ret = -ENOMEM;
+		goto err_plat_alloc;
+	}
+
+	platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
+	ret = platform_device_add(s3c24xx_snd_device);
+
+	if (ret) {
+		platform_device_put(s3c24xx_snd_device);
+		goto err_plat_add;
+	}
+
+	return 0;
+
+err_plat_add:
+err_plat_alloc:
+err_gpio_conf:
+	gpio_free(S3C2410_GPA(1));
+
+err_gpio:
+	return ret;
+}
+
+static void __exit rx1950_exit(void)
+{
+	platform_device_unregister(s3c24xx_snd_device);
+	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+	gpio_free(S3C2410_GPA(1));
+}
+
+module_init(rx1950_init);
+module_exit(rx1950_exit);
+
+/* Module information */
+MODULE_AUTHOR("Vasily Khoruzhick");
+MODULE_DESCRIPTION("ALSA SoC RX1950");
+MODULE_LICENSE("GPL");

sound/soc/samsung/s3c-i2s-v2.c

@@ -0,0 +1,758 @@
+/* sound/soc/samsung/s3c-i2c-v2.c
+ *
+ * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs.
+ *
+ * Copyright (c) 2006 Wolfson Microelectronics PLC.
+ *	Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *	linux@wolfsonmicro.com
+ *
+ * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <mach/dma.h>
+
+#include "regs-i2s-v2.h"
+#include "s3c-i2s-v2.h"
+#include "dma.h"
+
+#undef S3C_IIS_V2_SUPPORTED
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
+	|| defined(CONFIG_CPU_S5PV210)
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifndef S3C_IIS_V2_SUPPORTED
+#error Unsupported CPU model
+#endif
+
+#define S3C2412_I2S_DEBUG_CON 0
+
+static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+	return snd_soc_dai_get_drvdata(cpu_dai);
+}
+
+#define bit_set(v, b) (((v) & (b)) ? 1 : 0)
+
+#if S3C2412_I2S_DEBUG_CON
+static void dbg_showcon(const char *fn, u32 con)
+{
+	printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn,
+	       bit_set(con, S3C2412_IISCON_LRINDEX),
+	       bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY),
+	       bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY),
+	       bit_set(con, S3C2412_IISCON_TXFIFO_FULL),
+	       bit_set(con, S3C2412_IISCON_RXFIFO_FULL));
+
+	printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n",
+	       fn,
+	       bit_set(con, S3C2412_IISCON_TXDMA_PAUSE),
+	       bit_set(con, S3C2412_IISCON_RXDMA_PAUSE),
+	       bit_set(con, S3C2412_IISCON_TXCH_PAUSE),
+	       bit_set(con, S3C2412_IISCON_RXCH_PAUSE));
+	printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn,
+	       bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE),
+	       bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE),
+	       bit_set(con, S3C2412_IISCON_IIS_ACTIVE));
+}
+#else
+static inline void dbg_showcon(const char *fn, u32 con)
+{
+}
+#endif
+
+
+/* Turn on or off the transmission path. */
+static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
+{
+	void __iomem *regs = i2s->regs;
+	u32 fic, con, mod;
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	fic = readl(regs + S3C2412_IISFIC);
+	con = readl(regs + S3C2412_IISCON);
+	mod = readl(regs + S3C2412_IISMOD);
+
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+
+	if (on) {
+		con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+		con &= ~S3C2412_IISCON_TXDMA_PAUSE;
+		con &= ~S3C2412_IISCON_TXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXONLY:
+		case S3C2412_IISMOD_MODE_TXRX:
+			/* do nothing, we are in the right mode */
+			break;
+
+		case S3C2412_IISMOD_MODE_RXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXRX;
+			break;
+
+		default:
+			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
+		}
+
+		writel(con, regs + S3C2412_IISCON);
+		writel(mod, regs + S3C2412_IISMOD);
+	} else {
+		/* Note, we do not have any indication that the FIFO problems
+		 * tha the S3C2410/2440 had apply here, so we should be able
+		 * to disable the DMA and TX without resetting the FIFOS.
+		 */
+
+		con |=  S3C2412_IISCON_TXDMA_PAUSE;
+		con |=  S3C2412_IISCON_TXCH_PAUSE;
+		con &= ~S3C2412_IISCON_TXDMA_ACTIVE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXRX:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_RXONLY;
+			break;
+
+		case S3C2412_IISMOD_MODE_TXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			con &= ~S3C2412_IISCON_IIS_ACTIVE;
+			break;
+
+		default:
+			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
+		}
+
+		writel(mod, regs + S3C2412_IISMOD);
+		writel(con, regs + S3C2412_IISCON);
+	}
+
+	fic = readl(regs + S3C2412_IISFIC);
+	dbg_showcon(__func__, con);
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+}
+
+static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
+{
+	void __iomem *regs = i2s->regs;
+	u32 fic, con, mod;
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	fic = readl(regs + S3C2412_IISFIC);
+	con = readl(regs + S3C2412_IISCON);
+	mod = readl(regs + S3C2412_IISMOD);
+
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+
+	if (on) {
+		con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+		con &= ~S3C2412_IISCON_RXDMA_PAUSE;
+		con &= ~S3C2412_IISCON_RXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXRX:
+		case S3C2412_IISMOD_MODE_RXONLY:
+			/* do nothing, we are in the right mode */
+			break;
+
+		case S3C2412_IISMOD_MODE_TXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXRX;
+			break;
+
+		default:
+			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+		}
+
+		writel(mod, regs + S3C2412_IISMOD);
+		writel(con, regs + S3C2412_IISCON);
+	} else {
+		/* See txctrl notes on FIFOs. */
+
+		con &= ~S3C2412_IISCON_RXDMA_ACTIVE;
+		con |=  S3C2412_IISCON_RXDMA_PAUSE;
+		con |=  S3C2412_IISCON_RXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_RXONLY:
+			con &= ~S3C2412_IISCON_IIS_ACTIVE;
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			break;
+
+		case S3C2412_IISMOD_MODE_TXRX:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXONLY;
+			break;
+
+		default:
+			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+		}
+
+		writel(con, regs + S3C2412_IISCON);
+		writel(mod, regs + S3C2412_IISMOD);
+	}
+
+	fic = readl(regs + S3C2412_IISFIC);
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s)
+{
+	u32 iiscon;
+	unsigned long loops = msecs_to_loops(5);
+
+	pr_debug("Entered %s\n", __func__);
+
+	while (--loops) {
+		iiscon = readl(i2s->regs + S3C2412_IISCON);
+		if (iiscon & S3C2412_IISCON_LRINDEX)
+			break;
+
+		cpu_relax();
+	}
+
+	if (!loops) {
+		printk(KERN_ERR "%s: timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/*
+ * Set S3C2412 I2S DAI format
+ */
+static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x \n", iismod);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		i2s->master = 0;
+		iismod |= S3C2412_IISMOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		i2s->master = 1;
+		iismod &= ~S3C2412_IISMOD_SLAVE;
+		break;
+	default:
+		pr_err("unknwon master/slave format\n");
+		return -EINVAL;
+	}
+
+	iismod &= ~S3C2412_IISMOD_SDF_MASK;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_IIS;
+		break;
+	default:
+		pr_err("Unknown data format\n");
+		return -EINVAL;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x \n", iismod);
+	return 0;
+}
+
+static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = i2s->dma_playback;
+	else
+		dma_data = i2s->dma_capture;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
+	/* Working copies of register */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
+
+	iismod &= ~S3C64XX_IISMOD_BLC_MASK;
+	/* Sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod |= S3C64XX_IISMOD_BLC_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iismod |= S3C64XX_IISMOD_BLC_24BIT;
+		break;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+	pr_debug("Entered %s\n", __func__);
+	pr_debug("%s r: IISMOD: %x\n", __func__, iismod);
+
+	switch (clk_id) {
+	case S3C_I2SV2_CLKSRC_PCLK:
+		iismod &= ~S3C2412_IISMOD_IMS_SYSMUX;
+		break;
+
+	case S3C_I2SV2_CLKSRC_AUDIOBUS:
+		iismod |= S3C2412_IISMOD_IMS_SYSMUX;
+		break;
+
+	case S3C_I2SV2_CLKSRC_CDCLK:
+		/* Error if controller doesn't have the CDCLKCON bit */
+		if (!(i2s->feature & S3C_FEATURE_CDCLKCON))
+			return -EINVAL;
+
+		switch (dir) {
+		case SND_SOC_CLOCK_IN:
+			iismod |= S3C64XX_IISMOD_CDCLKCON;
+			break;
+		case SND_SOC_CLOCK_OUT:
+			iismod &= ~S3C64XX_IISMOD_CDCLKCON;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai);
+	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	unsigned long irqs;
+	int ret = 0;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		/* On start, ensure that the FIFOs are cleared and reset. */
+
+		writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		/* clear again, just in case */
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (!i2s->master) {
+			ret = s3c2412_snd_lrsync(i2s);
+			if (ret)
+				goto exit_err;
+		}
+
+		local_irq_save(irqs);
+
+		if (capture)
+			s3c2412_snd_rxctrl(i2s, 1);
+		else
+			s3c2412_snd_txctrl(i2s, 1);
+
+		local_irq_restore(irqs);
+
+		/*
+		 * Load the next buffer to DMA to meet the reqirement
+		 * of the auto reload mechanism of S3C24XX.
+		 * This call won't bother S3C64XX.
+		 */
+		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		local_irq_save(irqs);
+
+		if (capture)
+			s3c2412_snd_rxctrl(i2s, 0);
+		else
+			s3c2412_snd_txctrl(i2s, 0);
+
+		local_irq_restore(irqs);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+exit_err:
+	return ret;
+}
+
+/*
+ * Set S3C2412 Clock dividers
+ */
+static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+				  int div_id, int div)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 reg;
+
+	pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div);
+
+	switch (div_id) {
+	case S3C_I2SV2_DIV_BCLK:
+		switch (div) {
+		case 16:
+			div = S3C2412_IISMOD_BCLK_16FS;
+			break;
+
+		case 32:
+			div = S3C2412_IISMOD_BCLK_32FS;
+			break;
+
+		case 24:
+			div = S3C2412_IISMOD_BCLK_24FS;
+			break;
+
+		case 48:
+			div = S3C2412_IISMOD_BCLK_48FS;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		reg = readl(i2s->regs + S3C2412_IISMOD);
+		reg &= ~S3C2412_IISMOD_BCLK_MASK;
+		writel(reg | div, i2s->regs + S3C2412_IISMOD);
+
+		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+		break;
+
+	case S3C_I2SV2_DIV_RCLK:
+		switch (div) {
+		case 256:
+			div = S3C2412_IISMOD_RCLK_256FS;
+			break;
+
+		case 384:
+			div = S3C2412_IISMOD_RCLK_384FS;
+			break;
+
+		case 512:
+			div = S3C2412_IISMOD_RCLK_512FS;
+			break;
+
+		case 768:
+			div = S3C2412_IISMOD_RCLK_768FS;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		reg = readl(i2s->regs + S3C2412_IISMOD);
+		reg &= ~S3C2412_IISMOD_RCLK_MASK;
+		writel(reg | div, i2s->regs + S3C2412_IISMOD);
+		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+		break;
+
+	case S3C_I2SV2_DIV_PRESCALER:
+		if (div >= 0) {
+			writel((div << 8) | S3C2412_IISPSR_PSREN,
+			       i2s->regs + S3C2412_IISPSR);
+		} else {
+			writel(0x0, i2s->regs + S3C2412_IISPSR);
+		}
+		pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR));
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_sframes_t s3c2412_i2s_delay(struct snd_pcm_substream *substream,
+					   struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	u32 reg = readl(i2s->regs + S3C2412_IISFIC);
+	snd_pcm_sframes_t delay;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		delay = S3C2412_IISFIC_TXCOUNT(reg);
+	else
+		delay = S3C2412_IISFIC_RXCOUNT(reg);
+
+	return delay;
+}
+
+struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+	if (iismod & S3C2412_IISMOD_IMS_SYSMUX)
+		return i2s->iis_cclk;
+	else
+		return i2s->iis_pclk;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_get_clock);
+
+/* default table of all avaialable root fs divisors */
+static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
+
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+			    unsigned int *fstab,
+			    unsigned int rate, struct clk *clk)
+{
+	unsigned long clkrate = clk_get_rate(clk);
+	unsigned int div;
+	unsigned int fsclk;
+	unsigned int actual;
+	unsigned int fs;
+	unsigned int fsdiv;
+	signed int deviation = 0;
+	unsigned int best_fs = 0;
+	unsigned int best_div = 0;
+	unsigned int best_rate = 0;
+	unsigned int best_deviation = INT_MAX;
+
+	pr_debug("Input clock rate %ldHz\n", clkrate);
+
+	if (fstab == NULL)
+		fstab = iis_fs_tab;
+
+	for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) {
+		fsdiv = iis_fs_tab[fs];
+
+		fsclk = clkrate / fsdiv;
+		div = fsclk / rate;
+
+		if ((fsclk % rate) > (rate / 2))
+			div++;
+
+		if (div <= 1)
+			continue;
+
+		actual = clkrate / (fsdiv * div);
+		deviation = actual - rate;
+
+		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
+		       fsdiv, div, actual, deviation);
+
+		deviation = abs(deviation);
+
+		if (deviation < best_deviation) {
+			best_fs = fsdiv;
+			best_div = div;
+			best_rate = actual;
+			best_deviation = deviation;
+		}
+
+		if (deviation == 0)
+			break;
+	}
+
+	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
+	       best_fs, best_div, best_rate);
+
+	info->fs_div = best_fs;
+	info->clk_div = best_div;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
+
+int s3c_i2sv2_probe(struct snd_soc_dai *dai,
+		    struct s3c_i2sv2_info *i2s,
+		    unsigned long base)
+{
+	struct device *dev = dai->dev;
+	unsigned int iismod;
+
+	i2s->dev = dev;
+
+	/* record our i2s structure for later use in the callbacks */
+	snd_soc_dai_set_drvdata(dai, i2s);
+
+	i2s->regs = ioremap(base, 0x100);
+	if (i2s->regs == NULL) {
+		dev_err(dev, "cannot ioremap registers\n");
+		return -ENXIO;
+	}
+
+	i2s->iis_pclk = clk_get(dev, "iis");
+	if (IS_ERR(i2s->iis_pclk)) {
+		dev_err(dev, "failed to get iis_clock\n");
+		iounmap(i2s->regs);
+		return -ENOENT;
+	}
+
+	clk_enable(i2s->iis_pclk);
+
+	/* Mark ourselves as in TXRX mode so we can run through our cleanup
+	 * process without warnings. */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	iismod |= S3C2412_IISMOD_MODE_TXRX;
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	s3c2412_snd_txctrl(i2s, 0);
+	s3c2412_snd_rxctrl(i2s, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
+
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	u32 iismod;
+
+	if (dai->active) {
+		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+		/* some basic suspend checks */
+
+		iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+			pr_warning("%s: RXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+			pr_warning("%s: TXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+			pr_warning("%s: IIS active\n", __func__);
+	}
+
+	return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+
+	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
+		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+	if (dai->active) {
+		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		ndelay(250);
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+	}
+
+	return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume  NULL
+#endif
+
+int s3c_i2sv2_register_component(struct device *dev, int id,
+			   struct snd_soc_component_driver *cmp_drv,
+			   struct snd_soc_dai_driver *dai_drv)
+{
+	struct snd_soc_dai_ops *ops = drv->ops;
+
+	ops->trigger = s3c2412_i2s_trigger;
+	if (!ops->hw_params)
+		ops->hw_params = s3c_i2sv2_hw_params;
+	ops->set_fmt = s3c2412_i2s_set_fmt;
+	ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
+	ops->set_sysclk = s3c_i2sv2_set_sysclk;
+
+	/* Allow overriding by (for example) IISv4 */
+	if (!ops->delay)
+		ops->delay = s3c2412_i2s_delay;
+
+	drv->suspend = s3c2412_i2s_suspend;
+	drv->resume = s3c2412_i2s_resume;
+
+	return snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
+
+MODULE_LICENSE("GPL");

sound/soc/samsung/s3c-i2s-v2.h

@@ -0,0 +1,107 @@
+/* sound/soc/samsung/s3c-i2s-v2.h
+ *
+ * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+*/
+
+/* This code is the core support for the I2S block found in a number of
+ * Samsung SoC devices which is unofficially named I2S-V2. Currently the
+ * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S
+ * channels via configurable GPIO.
+ */
+
+#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H
+#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__
+
+#define S3C_I2SV2_DIV_BCLK	(1)
+#define S3C_I2SV2_DIV_RCLK	(2)
+#define S3C_I2SV2_DIV_PRESCALER	(3)
+
+#define S3C_I2SV2_CLKSRC_PCLK		0
+#define S3C_I2SV2_CLKSRC_AUDIOBUS	1
+#define S3C_I2SV2_CLKSRC_CDCLK		2
+
+/* Set this flag for I2S controllers that have the bit IISMOD[12]
+ * bridge/break RCLK signal and external Xi2sCDCLK pin.
+ */
+#define S3C_FEATURE_CDCLKCON	(1 << 0)
+
+/**
+ * struct s3c_i2sv2_info - S3C I2S-V2 information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device registe block.
+ * @feature: Set of bit-flags indicating features of the controller.
+ * @master: True if the I2S core is the I2S bit clock master.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ * @suspend_iismod: PM save for the IISMOD register.
+ * @suspend_iiscon: PM save for the IISCON register.
+ * @suspend_iispsr: PM save for the IISPSR register.
+ *
+ * This is the private codec state for the hardware associated with an
+ * I2S channel such as the register mappings and clock sources.
+ */
+struct s3c_i2sv2_info {
+	struct device	*dev;
+	void __iomem	*regs;
+
+	u32		feature;
+
+	struct clk	*iis_pclk;
+	struct clk	*iis_cclk;
+
+	unsigned char	 master;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+
+	u32		 suspend_iismod;
+	u32		 suspend_iiscon;
+	u32		 suspend_iispsr;
+
+	unsigned long	base;
+};
+
+extern struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai);
+
+struct s3c_i2sv2_rate_calc {
+	unsigned int	clk_div;	/* for prescaler */
+	unsigned int	fs_div;		/* for root frame clock */
+};
+
+extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+				   unsigned int *fstab,
+				   unsigned int rate, struct clk *clk);
+
+/**
+ * s3c_i2sv2_probe - probe for i2s device helper
+ * @dai: The ASoC DAI structure supplied to the original probe.
+ * @i2s: Our local i2s structure to fill in.
+ * @base: The base address for the registers.
+ */
+extern int s3c_i2sv2_probe(struct snd_soc_dai *dai,
+			   struct s3c_i2sv2_info *i2s,
+			   unsigned long base);
+
+/**
+ * s3c_i2sv2_register_component - register component and dai with soc core
+ * @dev: DAI device
+ * @id: DAI ID
+ * @drv: The driver structure to register
+ *
+ * Fill in any missing fields and then register the given dai with the
+ * soc core.
+ */
+extern int s3c_i2sv2_register_component(struct device *dev, int id,
+					struct snd_soc_component_driver *cmp_drv,
+					struct snd_soc_dai_driver *dai_drv);
+
+#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */

sound/soc/samsung/s3c2412-i2s.c

@@ -0,0 +1,213 @@
+/* sound/soc/samsung/s3c2412-i2s.c
+ *
+ * ALSA Soc Audio Layer - S3C2412 I2S driver
+ *
+ * Copyright (c) 2006 Wolfson Microelectronics PLC.
+ *	Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *	linux@wolfsonmicro.com
+ *
+ * Copyright (c) 2007, 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <mach/dma.h>
+
+#include "dma.h"
+#include "regs-i2s-v2.h"
+#include "s3c2412-i2s.h"
+
+static struct s3c2410_dma_client s3c2412_dma_client_out = {
+	.name		= "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c2412_dma_client_in = {
+	.name		= "I2S PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = {
+	.client		= &s3c2412_dma_client_out,
+	.channel	= DMACH_I2S_OUT,
+	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISTXD,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = {
+	.client		= &s3c2412_dma_client_in,
+	.channel	= DMACH_I2S_IN,
+	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISRXD,
+	.dma_size	= 4,
+};
+
+static struct s3c_i2sv2_info s3c2412_i2s;
+
+static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
+{
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS);
+	if (ret)
+		return ret;
+
+	s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in;
+	s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out;
+
+	s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk");
+	if (IS_ERR(s3c2412_i2s.iis_cclk)) {
+		pr_err("failed to get i2sclk clock\n");
+		iounmap(s3c2412_i2s.regs);
+		return PTR_ERR(s3c2412_i2s.iis_cclk);
+	}
+
+	/* Set MPLL as the source for IIS CLK */
+
+	clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll"));
+	clk_enable(s3c2412_i2s.iis_cclk);
+
+	s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk;
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	return 0;
+}
+
+static int s3c2412_i2s_remove(struct snd_soc_dai *dai)
+{
+	clk_disable(s3c2412_i2s.iis_cclk);
+	clk_put(s3c2412_i2s.iis_cclk);
+	iounmap(s3c2412_i2s.regs);
+
+	return 0;
+}
+
+static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai);
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = i2s->dma_playback;
+	else
+		dma_data = i2s->dma_capture;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod |= S3C2412_IISMOD_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iismod &= ~S3C2412_IISMOD_8BIT;
+		break;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+#define S3C2412_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+static const struct snd_soc_dai_ops s3c2412_i2s_dai_ops = {
+	.hw_params	= s3c2412_i2s_hw_params,
+};
+
+static struct snd_soc_dai_driver s3c2412_i2s_dai = {
+	.probe		= s3c2412_i2s_probe,
+	.remove	= s3c2412_i2s_remove,
+	.playback = {
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= S3C2412_I2S_RATES,
+		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= S3C2412_I2S_RATES,
+		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops = &s3c2412_i2s_dai_ops,
+};
+
+static const struct snd_soc_component_driver s3c2412_i2s_component = {
+	.name		= "s3c2412-i2s",
+};
+
+static int s3c2412_iis_dev_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = s3c_i2sv2_register_component(&pdev->dev, -1,
+					   &s3c2412_i2s_component,
+					   &s3c2412_i2s_dai);
+	if (ret) {
+		pr_err("failed to register the dai\n");
+		return ret;
+	}
+
+	ret = asoc_dma_platform_register(&pdev->dev);
+	if (ret) {
+		pr_err("failed to register the DMA: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	snd_soc_unregister_component(&pdev->dev);
+	return ret;
+}
+
+static int s3c2412_iis_dev_remove(struct platform_device *pdev)
+{
+	asoc_dma_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver s3c2412_iis_driver = {
+	.probe  = s3c2412_iis_dev_probe,
+	.remove = s3c2412_iis_dev_remove,
+	.driver = {
+		.name = "s3c2412-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(s3c2412_iis_driver);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C2412 I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2412-iis");

sound/soc/samsung/s3c2412-i2s.h

@@ -0,0 +1,27 @@
+/* sound/soc/samsung/s3c2412-i2s.c
+ *
+ * ALSA Soc Audio Layer - S3C2412 I2S driver
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+*/
+
+#ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H
+#define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__
+
+#include "s3c-i2s-v2.h"
+
+#define S3C2412_DIV_BCLK	S3C_I2SV2_DIV_BCLK
+#define S3C2412_DIV_RCLK	S3C_I2SV2_DIV_RCLK
+#define S3C2412_DIV_PRESCALER	S3C_I2SV2_DIV_PRESCALER
+
+#define S3C2412_CLKSRC_PCLK	S3C_I2SV2_CLKSRC_PCLK
+#define S3C2412_CLKSRC_I2SCLK	S3C_I2SV2_CLKSRC_AUDIOBUS
+
+#endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */

sound/soc/samsung/s3c24xx-i2s.c

@@ -0,0 +1,517 @@
+/*
+ * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <mach/dma.h>
+#include "regs-iis.h"
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+
+static struct s3c2410_dma_client s3c24xx_dma_client_out = {
+	.name = "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c24xx_dma_client_in = {
+	.name = "I2S PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
+	.client		= &s3c24xx_dma_client_out,
+	.channel	= DMACH_I2S_OUT,
+	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	.dma_size	= 2,
+};
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
+	.client		= &s3c24xx_dma_client_in,
+	.channel	= DMACH_I2S_IN,
+	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	.dma_size	= 2,
+};
+
+struct s3c24xx_i2s_info {
+	void __iomem	*regs;
+	struct clk	*iis_clk;
+	u32		iiscon;
+	u32		iismod;
+	u32		iisfcon;
+	u32		iispsr;
+};
+static struct s3c24xx_i2s_info s3c24xx_i2s;
+
+static void s3c24xx_snd_txctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
+		iiscon  |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_TXIDLE;
+		iismod  |= S3C2410_IISMOD_TXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_TXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_TXDMA;
+		iiscon  |=  S3C2410_IISCON_TXIDLE;
+		iiscon  &= ~S3C2410_IISCON_TXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_TXMODE;
+
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+static void s3c24xx_snd_rxctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
+		iiscon  |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_RXIDLE;
+		iismod  |= S3C2410_IISMOD_RXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_RXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_RXDMA;
+		iiscon  |= S3C2410_IISCON_RXIDLE;
+		iiscon  &= ~S3C2410_IISCON_RXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_RXMODE;
+
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c24xx_snd_lrsync(void)
+{
+	u32 iiscon;
+	int timeout = 50; /* 5ms */
+
+	pr_debug("Entered %s\n", __func__);
+
+	while (1) {
+		iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		if (iiscon & S3C2410_IISCON_LRINDEX)
+			break;
+
+		if (!timeout--)
+			return -ETIMEDOUT;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+/*
+ * Check whether CPU is the master or slave
+ */
+static inline int s3c24xx_snd_is_clkmaster(void)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
+}
+
+/*
+ * Set S3C24xx I2S DAI format
+ */
+static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x \n", iismod);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iismod |= S3C2410_IISMOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		iismod &= ~S3C2410_IISMOD_SLAVE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2410_IISMOD_MSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2410_IISMOD_MSB;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x \n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &s3c24xx_i2s_pcm_stereo_out;
+	else
+		dma_data = &s3c24xx_i2s_pcm_stereo_in;
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	/* Working copies of register */
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x\n", iismod);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod &= ~S3C2410_IISMOD_16BIT;
+		dma_data->dma_size = 1;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iismod |= S3C2410_IISMOD_16BIT;
+		dma_data->dma_size = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x\n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	int ret = 0;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (!s3c24xx_snd_is_clkmaster()) {
+			ret = s3c24xx_snd_lrsync();
+			if (ret)
+				goto exit_err;
+		}
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(1);
+		else
+			s3c24xx_snd_txctrl(1);
+
+		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(0);
+		else
+			s3c24xx_snd_txctrl(0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+exit_err:
+	return ret;
+}
+
+/*
+ * Set S3C24xx Clock source
+ */
+static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod &= ~S3C2440_IISMOD_MPLL;
+
+	switch (clk_id) {
+	case S3C24XX_CLKSRC_PCLK:
+		break;
+	case S3C24XX_CLKSRC_MPLL:
+		iismod |= S3C2440_IISMOD_MPLL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	return 0;
+}
+
+/*
+ * Set S3C24xx Clock dividers
+ */
+static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	u32 reg;
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (div_id) {
+	case S3C24XX_DIV_BCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_MCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_PRESCALER:
+		writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * To avoid duplicating clock code, allow machine driver to
+ * get the clockrate from here.
+ */
+u32 s3c24xx_i2s_get_clockrate(void)
+{
+	return clk_get_rate(s3c24xx_i2s.iis_clk);
+}
+EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
+
+static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100);
+	if (s3c24xx_i2s.regs == NULL)
+		return -ENXIO;
+
+	s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis");
+	if (IS_ERR(s3c24xx_i2s.iis_clk)) {
+		pr_err("failed to get iis_clock\n");
+		iounmap(s3c24xx_i2s.regs);
+		return PTR_ERR(s3c24xx_i2s.iis_clk);
+	}
+	clk_enable(s3c24xx_i2s.iis_clk);
+
+	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
+	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+			      S3C_GPIO_PULL_NONE);
+
+	writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+
+	s3c24xx_snd_txctrl(0);
+	s3c24xx_snd_rxctrl(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	clk_disable(s3c24xx_i2s.iis_clk);
+
+	return 0;
+}
+
+static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+	clk_enable(s3c24xx_i2s.iis_clk);
+
+	writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+	writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+	writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	return 0;
+}
+#else
+#define s3c24xx_i2s_suspend NULL
+#define s3c24xx_i2s_resume NULL
+#endif
+
+
+#define S3C24XX_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+static const struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
+	.trigger	= s3c24xx_i2s_trigger,
+	.hw_params	= s3c24xx_i2s_hw_params,
+	.set_fmt	= s3c24xx_i2s_set_fmt,
+	.set_clkdiv	= s3c24xx_i2s_set_clkdiv,
+	.set_sysclk	= s3c24xx_i2s_set_sysclk,
+};
+
+static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
+	.probe = s3c24xx_i2s_probe,
+	.suspend = s3c24xx_i2s_suspend,
+	.resume = s3c24xx_i2s_resume,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &s3c24xx_i2s_dai_ops,
+};
+
+static const struct snd_soc_component_driver s3c24xx_i2s_component = {
+	.name		= "s3c24xx-i2s",
+};
+
+static int s3c24xx_iis_dev_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	ret = snd_soc_register_component(&pdev->dev, &s3c24xx_i2s_component,
+					 &s3c24xx_i2s_dai, 1);
+	if (ret) {
+		pr_err("failed to register the dai\n");
+		return ret;
+	}
+
+	ret = asoc_dma_platform_register(&pdev->dev);
+	if (ret) {
+		pr_err("failed to register the dma: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	snd_soc_unregister_component(&pdev->dev);
+	return ret;
+}
+
+static int s3c24xx_iis_dev_remove(struct platform_device *pdev)
+{
+	asoc_dma_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver s3c24xx_iis_driver = {
+	.probe  = s3c24xx_iis_dev_probe,
+	.remove = s3c24xx_iis_dev_remove,
+	.driver = {
+		.name = "s3c24xx-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(s3c24xx_iis_driver);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c24xx-iis");

sound/soc/samsung/s3c24xx-i2s.h

@@ -0,0 +1,35 @@
+/*
+ * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Revision history
+ *    10th Nov 2006   Initial version.
+ */
+
+#ifndef S3C24XXI2S_H_
+#define S3C24XXI2S_H_
+
+/* clock sources */
+#define S3C24XX_CLKSRC_PCLK 0
+#define S3C24XX_CLKSRC_MPLL 1
+
+/* Clock dividers */
+#define S3C24XX_DIV_MCLK	0
+#define S3C24XX_DIV_BCLK	1
+#define S3C24XX_DIV_PRESCALER	2
+
+/* prescaler */
+#define S3C24XX_PRESCALE(a,b) \
+	(((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT))
+
+u32 s3c24xx_i2s_get_clockrate(void);
+
+#endif /*S3C24XXI2S_H_*/

sound/soc/samsung/s3c24xx_simtec.c

@@ -0,0 +1,388 @@
+/* sound/soc/samsung/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_gain;
+	return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	int value = ucontrol->value.integer.value[0];
+
+	spk_gain = value;
+
+	if (!spk_unmute)
+		speaker_gain_set(value);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+		       speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+	pr_debug("%s: to=%d\n", __func__, to);
+
+	spk_unmute = to;
+	gpio_set_value(pdata->amp_gpio, to);
+
+	/* if we're umuting, also re-set the gain */
+	if (to && pdata->amp_gain[0] > 0)
+		speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_unmute;
+	return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	spk_unmute_state(ucontrol->value.integer.value[0]);
+	return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+		       speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+
+	if (pdata->amp_gpio > 0) {
+		pr_debug("%s: adding amp routes\n", __func__);
+
+		snd_soc_add_card_controls(card, amp_unmute_controls,
+				     ARRAY_SIZE(amp_unmute_controls));
+	}
+
+	if (pdata->amp_gain[0] > 0) {
+		pr_debug("%s: adding amp controls\n", __func__);
+		snd_soc_add_card_controls(card, amp_gain_controls,
+				     ARRAY_SIZE(amp_gain_controls));
+	}
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration  settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int ret;
+
+	/* Set the CODEC as the bus clock master, I2S */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set cpu dai format\n", __func__);
+		return ret;
+	}
+
+	/* Set the CODEC as the bus clock master */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set codec dai format\n", __func__);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+				     CODEC_CLOCK, SND_SOC_CLOCK_IN);
+	if (ret) {
+		pr_err( "%s: failed setting codec sysclk\n", __func__);
+		return ret;
+	}
+
+	if (pdata->use_mpllin) {
+		ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+					     0, SND_SOC_CLOCK_OUT);
+
+		if (ret) {
+			pr_err("%s: failed to set MPLLin as clksrc\n",
+			       __func__);
+			return ret;
+		}
+	}
+
+	if (pdata->output_cdclk) {
+		int cdclk_scale;
+
+		cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+		cdclk_scale--;
+
+		ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+					     cdclk_scale);
+	}
+
+	return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	/* call any board supplied startup code, this currently only
+	 * covers the bast/vr1000 which have a CPLD in the way of the
+	 * LRCLK */
+	if (pd->startup)
+		pd->startup();
+
+	return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+	.hw_params	= simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+			   struct s3c24xx_audio_simtec_pdata *pd)
+{
+	int ret;
+
+	/* attach gpio amp gain (if any) */
+	if (pdata->amp_gain[0] > 0) {
+		ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain0\n");
+			return ret;
+		}
+
+		ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain1\n");
+			gpio_free(pdata->amp_gain[0]);
+			return ret;
+		}
+
+		gpio_direction_output(pd->amp_gain[0], 0);
+		gpio_direction_output(pd->amp_gain[1], 0);
+	}
+
+	/* note, currently we assume GPA0 isn't valid amp */
+	if (pdata->amp_gpio > 0) {
+		ret = gpio_request(pd->amp_gpio, "gpio-amp");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio %d (%d)\n",
+				pd->amp_gpio, ret);
+			goto err_amp;
+		}
+
+		/* set the amp off at startup */
+		spk_unmute_state(0);
+	}
+
+	return 0;
+
+err_amp:
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	if (pd->amp_gpio > 0)
+		gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+static int simtec_audio_resume(struct device *dev)
+{
+	simtec_call_startup(pdata);
+	return 0;
+}
+
+const struct dev_pm_ops simtec_audio_pmops = {
+	.resume	= simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int simtec_audio_core_probe(struct platform_device *pdev,
+			    struct snd_soc_card *card)
+{
+	struct platform_device *snd_dev;
+	int ret;
+
+	card->dai_link->ops = &simtec_snd_ops;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	simtec_call_startup(pdata);
+
+	xtal_clk = clk_get(&pdev->dev, "xtal");
+	if (IS_ERR(xtal_clk)) {
+		dev_err(&pdev->dev, "could not get clkout0\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+	ret = attach_gpio_amp(&pdev->dev, pdata);
+	if (ret)
+		goto err_clk;
+
+	snd_dev = platform_device_alloc("soc-audio", -1);
+	if (!snd_dev) {
+		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+		ret = -ENOMEM;
+		goto err_gpio;
+	}
+
+	platform_set_drvdata(snd_dev, card);
+
+	ret = platform_device_add(snd_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+		goto err_pdev;
+	}
+
+	platform_set_drvdata(pdev, snd_dev);
+	return 0;
+
+err_pdev:
+	platform_device_put(snd_dev);
+
+err_gpio:
+	detach_gpio_amp(pdata);
+
+err_clk:
+	clk_put(xtal_clk);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int simtec_audio_remove(struct platform_device *pdev)
+{
+	struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(snd_dev);
+
+	detach_gpio_amp(pdata);
+	clk_put(xtal_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");

sound/soc/samsung/s3c24xx_simtec.h

@@ -0,0 +1,22 @@
+/* sound/soc/samsung/s3c24xx_simtec.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void simtec_audio_init(struct snd_soc_pcm_runtime *rtd);
+
+extern int simtec_audio_core_probe(struct platform_device *pdev,
+				   struct snd_soc_card *card);
+
+extern int simtec_audio_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+extern const struct dev_pm_ops simtec_audio_pmops;
+#define simtec_audio_pm &simtec_audio_pmops
+#else
+#define simtec_audio_pm NULL
+#endif

sound/soc/samsung/s3c24xx_simtec_hermes.c

@@ -0,0 +1,123 @@
+/* sound/soc/samsung/s3c24xx_simtec_hermes.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include "s3c24xx_simtec.h"
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("GSM Out", NULL),
+	SND_SOC_DAPM_LINE("GSM In", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
+	SND_SOC_DAPM_LINE("ZV", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+	/* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
+
+	{ "Headphone Jack", NULL, "HPLOUT" },
+	{ "Headphone Jack", NULL, "HPLCOM" },
+	{ "Headphone Jack", NULL, "HPROUT" },
+	{ "Headphone Jack", NULL, "HPRCOM" },
+
+	/* ZV connected to Line1 */
+
+	{ "LINE1L", NULL, "ZV" },
+	{ "LINE1R", NULL, "ZV" },
+
+	/* Line In connected to Line2 */
+
+	{ "LINE2L", NULL, "Line In" },
+	{ "LINE2R", NULL, "Line In" },
+
+	/* Microphone connected to MIC3R and MIC_BIAS */
+
+	{ "MIC3L", NULL, "Mic Jack" },
+
+	/* GSM connected to MONO_LOUT and MIC3L (in) */
+
+	{ "GSM Out", NULL, "MONO_LOUT" },
+	{ "MIC3L", NULL, "GSM In" },
+
+	/* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
+	 * not using the DAPM to power it up and down as there it makes
+	 * a click when powering up. */
+};
+
+/**
+ * simtec_hermes_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
+	snd_soc_dapm_enable_pin(dapm, "Line In");
+	snd_soc_dapm_enable_pin(dapm, "Line Out");
+	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
+
+	simtec_audio_init(rtd);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic33 = {
+	.name		= "tlv320aic33",
+	.stream_name	= "TLV320AIC33",
+	.codec_name	= "tlv320aic3x-codec.0-001a",
+	.cpu_dai_name	= "s3c24xx-iis",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.platform_name	= "s3c24xx-iis",
+	.init		= simtec_hermes_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
+	.name		= "Simtec-Hermes",
+	.owner		= THIS_MODULE,
+	.dai_link	= &simtec_dai_aic33,
+	.num_links	= 1,
+
+	.dapm_widgets	= dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+	.dapm_routes	= base_map,
+	.num_dapm_routes = ARRAY_SIZE(base_map),
+};
+
+static int simtec_audio_hermes_probe(struct platform_device *pd)
+{
+	dev_info(&pd->dev, "probing....\n");
+	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic33);
+}
+
+static struct platform_driver simtec_audio_hermes_platdrv = {
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c24xx-simtec-hermes-snd",
+		.pm	= simtec_audio_pm,
+	},
+	.probe	= simtec_audio_hermes_probe,
+	.remove	= simtec_audio_remove,
+};
+
+module_platform_driver(simtec_audio_hermes_platdrv);
+
+MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");

sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c

@@ -0,0 +1,111 @@
+/* sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include "s3c24xx_simtec.h"
+
+/* supported machines:
+ *
+ * Machine	Connections		AMP
+ * -------	-----------		---
+ * BAST		MIC, HPOUT, LOUT, LIN	TPA2001D1 (HPOUTL,R) (gain hardwired)
+ * VR1000	HPOUT, LIN		None
+ * VR2000	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
+ * DePicture	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
+ * Anubis	LIN, LOUT, MIC, HP	TPA2001D1 (HPOUTL,R)
+ */
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+	{ "Headphone Jack", NULL, "LHPOUT"},
+	{ "Headphone Jack", NULL, "RHPOUT"},
+
+	{ "Line Out", NULL, "LOUT" },
+	{ "Line Out", NULL, "ROUT" },
+
+	{ "LLINEIN", NULL, "Line In"},
+	{ "RLINEIN", NULL, "Line In"},
+
+	{ "MICIN", NULL, "Mic Jack"},
+};
+
+/**
+ * simtec_tlv320aic23_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
+	snd_soc_dapm_enable_pin(dapm, "Line In");
+	snd_soc_dapm_enable_pin(dapm, "Line Out");
+	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
+
+	simtec_audio_init(rtd);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic23 = {
+	.name		= "tlv320aic23",
+	.stream_name	= "TLV320AIC23",
+	.codec_name	= "tlv320aic3x-codec.0-001a",
+	.cpu_dai_name	= "s3c24xx-iis",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.platform_name	= "s3c24xx-iis",
+	.init		= simtec_tlv320aic23_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
+	.name		= "Simtec",
+	.owner		= THIS_MODULE,
+	.dai_link	= &simtec_dai_aic23,
+	.num_links	= 1,
+
+	.dapm_widgets	= dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+	.dapm_routes	= base_map,
+	.num_dapm_routes = ARRAY_SIZE(base_map),
+};
+
+static int simtec_audio_tlv320aic23_probe(struct platform_device *pd)
+{
+	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic23);
+}
+
+static struct platform_driver simtec_audio_tlv320aic23_driver = {
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c24xx-simtec-tlv320aic23",
+		.pm	= simtec_audio_pm,
+	},
+	.probe	= simtec_audio_tlv320aic23_probe,
+	.remove	= simtec_audio_remove,
+};
+
+module_platform_driver(simtec_audio_tlv320aic23_driver);
+
+MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");

sound/soc/samsung/s3c24xx_uda134x.c

@@ -0,0 +1,351 @@
+/*
+ * Modifications by Christian Pellegrin <chripell@evolware.org>
+ *
+ * s3c24xx_uda134x.c  --  S3C24XX_UDA134X ALSA SoC Audio board driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/s3c24xx_uda134x.h>
+
+#include "regs-iis.h"
+
+#include "s3c24xx-i2s.h"
+
+/* #define ENFORCE_RATES 1 */
+/*
+  Unfortunately the S3C24XX in master mode has a limited capacity of
+  generating the clock for the codec. If you define this only rates
+  that are really available will be enforced. But be careful, most
+  user level application just want the usual sampling frequencies (8,
+  11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
+  operation for embedded systems. So if you aren't very lucky or your
+  hardware engineer wasn't very forward-looking it's better to leave
+  this undefined. If you do so an approximate value for the requested
+  sampling rate in the range -/+ 5% will be chosen. If this in not
+  possible an error will be returned.
+*/
+
+static struct clk *xtal;
+static struct clk *pclk;
+/* this is need because we don't have a place where to keep the
+ * pointers to the clocks in each substream. We get the clocks only
+ * when we are actually using them so we don't block stuff like
+ * frequency change or oscillator power-off */
+static int clk_users;
+static DEFINE_MUTEX(clk_lock);
+
+static unsigned int rates[33 * 2];
+#ifdef ENFORCE_RATES
+static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
+	.count	= ARRAY_SIZE(rates),
+	.list	= rates,
+	.mask	= 0,
+};
+#endif
+
+static struct platform_device *s3c24xx_uda134x_snd_device;
+
+static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
+{
+	int ret = 0;
+#ifdef ENFORCE_RATES
+	struct snd_pcm_runtime *runtime = substream->runtime;
+#endif
+
+	mutex_lock(&clk_lock);
+	pr_debug("%s %d\n", __func__, clk_users);
+	if (clk_users == 0) {
+		xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
+		if (IS_ERR(xtal)) {
+			printk(KERN_ERR "%s cannot get xtal\n", __func__);
+			ret = PTR_ERR(xtal);
+		} else {
+			pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
+				       "pclk");
+			if (IS_ERR(pclk)) {
+				printk(KERN_ERR "%s cannot get pclk\n",
+				       __func__);
+				clk_put(xtal);
+				ret = PTR_ERR(pclk);
+			}
+		}
+		if (!ret) {
+			int i, j;
+
+			for (i = 0; i < 2; i++) {
+				int fs = i ? 256 : 384;
+
+				rates[i*33] = clk_get_rate(xtal) / fs;
+				for (j = 1; j < 33; j++)
+					rates[i*33 + j] = clk_get_rate(pclk) /
+						(j * fs);
+			}
+		}
+	}
+	clk_users += 1;
+	mutex_unlock(&clk_lock);
+	if (!ret) {
+#ifdef ENFORCE_RATES
+		ret = snd_pcm_hw_constraint_list(runtime, 0,
+						 SNDRV_PCM_HW_PARAM_RATE,
+						 &hw_constraints_rates);
+		if (ret < 0)
+			printk(KERN_ERR "%s cannot set constraints\n",
+			       __func__);
+#endif
+	}
+	return ret;
+}
+
+static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
+{
+	mutex_lock(&clk_lock);
+	pr_debug("%s %d\n", __func__, clk_users);
+	clk_users -= 1;
+	if (clk_users == 0) {
+		clk_put(xtal);
+		xtal = NULL;
+		clk_put(pclk);
+		pclk = NULL;
+	}
+	mutex_unlock(&clk_lock);
+}
+
+static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int clk = 0;
+	int ret = 0;
+	int clk_source, fs_mode;
+	unsigned long rate = params_rate(params);
+	long err, cerr;
+	unsigned int div;
+	int i, bi;
+
+	err = 999999;
+	bi = 0;
+	for (i = 0; i < 2*33; i++) {
+		cerr = rates[i] - rate;
+		if (cerr < 0)
+			cerr = -cerr;
+		if (cerr < err) {
+			err = cerr;
+			bi = i;
+		}
+	}
+	if (bi / 33 == 1)
+		fs_mode = S3C2410_IISMOD_256FS;
+	else
+		fs_mode = S3C2410_IISMOD_384FS;
+	if (bi % 33 == 0) {
+		clk_source = S3C24XX_CLKSRC_MPLL;
+		div = 1;
+	} else {
+		clk_source = S3C24XX_CLKSRC_PCLK;
+		div = bi % 33;
+	}
+	pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
+
+	clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
+	pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
+		 fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
+		 clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
+		 div, clk, err);
+
+	if ((err * 100 / rate) > 5) {
+		printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
+		       "too different from desired (%ld%%)\n",
+		       err * 100 / rate);
+		return -EINVAL;
+	}
+
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
+			SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+			S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+			S3C24XX_PRESCALE(div, div));
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+			SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops s3c24xx_uda134x_ops = {
+	.startup = s3c24xx_uda134x_startup,
+	.shutdown = s3c24xx_uda134x_shutdown,
+	.hw_params = s3c24xx_uda134x_hw_params,
+};
+
+static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
+	.name = "UDA134X",
+	.stream_name = "UDA134X",
+	.codec_name = "uda134x-codec",
+	.codec_dai_name = "uda134x-hifi",
+	.cpu_dai_name = "s3c24xx-iis",
+	.ops = &s3c24xx_uda134x_ops,
+	.platform_name	= "s3c24xx-iis",
+};
+
+static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
+	.name = "S3C24XX_UDA134X",
+	.owner = THIS_MODULE,
+	.dai_link = &s3c24xx_uda134x_dai_link,
+	.num_links = 1,
+};
+
+static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
+
+static void setdat(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
+}
+
+static void setclk(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
+}
+
+static void setmode(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
+}
+
+/* FIXME - This must be codec platform data but in which board file ?? */
+static struct uda134x_platform_data s3c24xx_uda134x = {
+	.l3 = {
+		.setdat = setdat,
+		.setclk = setclk,
+		.setmode = setmode,
+		.data_hold = 1,
+		.data_setup = 1,
+		.clock_high = 1,
+		.mode_hold = 1,
+		.mode = 1,
+		.mode_setup = 1,
+	},
+};
+
+static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
+{
+	if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "l3 %s pin already in use", fun);
+		return -EBUSY;
+	}
+	gpio_direction_output(pin, 0);
+	return 0;
+}
+
+static int s3c24xx_uda134x_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
+
+	s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
+	if (s3c24xx_uda134x_l3_pins == NULL) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "unable to find platform data\n");
+		return -ENODEV;
+	}
+	s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
+	s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
+
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
+				      "data") < 0)
+		return -EBUSY;
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
+				      "clk") < 0) {
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+		return -EBUSY;
+	}
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
+				      "mode") < 0) {
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+		return -EBUSY;
+	}
+
+	s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s3c24xx_uda134x_snd_device) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "Unable to register\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(s3c24xx_uda134x_snd_device,
+			     &snd_soc_s3c24xx_uda134x);
+	platform_device_add_data(s3c24xx_uda134x_snd_device, &s3c24xx_uda134x, sizeof(s3c24xx_uda134x));
+	ret = platform_device_add(s3c24xx_uda134x_snd_device);
+	if (ret) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
+		platform_device_put(s3c24xx_uda134x_snd_device);
+	}
+
+	return ret;
+}
+
+static int s3c24xx_uda134x_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(s3c24xx_uda134x_snd_device);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
+	return 0;
+}
+
+static struct platform_driver s3c24xx_uda134x_driver = {
+	.probe  = s3c24xx_uda134x_probe,
+	.remove = s3c24xx_uda134x_remove,
+	.driver = {
+		.name = "s3c24xx_uda134x",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(s3c24xx_uda134x_driver);
+
+MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
+MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smartq_wm8987.c

@@ -0,0 +1,275 @@
+/* sound/soc/samsung/smartq_wm8987.c
+ *
+ * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * Based on smdk6410_wm8987.c
+ *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
+ *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include "i2s.h"
+#include "../codecs/wm8750.h"
+
+/*
+ * WM8987 is register compatible with WM8750, so using that as base driver.
+ */
+
+static struct snd_soc_card snd_soc_smartq;
+
+static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 32000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_NB_NF |
+					     SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+					   SND_SOC_DAIFMT_NB_NF |
+					   SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* Use PCLK for I2S signal generation */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Gate the RCLK output on PAD */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SmartQ WM8987 HiFi DAI operations.
+ */
+static struct snd_soc_ops smartq_hifi_ops = {
+	.hw_params = smartq_hifi_hw_params,
+};
+
+static struct snd_soc_jack smartq_jack;
+
+static struct snd_soc_jack_pin smartq_jack_pins[] = {
+	/* Disable speaker when headphone is plugged in */
+	{
+		.pin	= "Internal Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+};
+
+static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
+	{
+		.gpio		= S3C64XX_GPL(12),
+		.name		= "headphone detect",
+		.report		= SND_JACK_HEADPHONE,
+		.debounce_time	= 200,
+	},
+};
+
+static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Internal Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Internal Mic"),
+};
+
+static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k,
+				int event)
+{
+	gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Internal Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LOUT2"},
+	{"Headphone Jack", NULL, "ROUT2"},
+
+	{"Internal Speaker", NULL, "LOUT2"},
+	{"Internal Speaker", NULL, "ROUT2"},
+
+	{"Mic Bias", NULL, "Internal Mic"},
+	{"LINPUT2", NULL, "Mic Bias"},
+};
+
+static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int err = 0;
+
+	/* set endpoints to not connected */
+	snd_soc_dapm_nc_pin(dapm, "LINPUT1");
+	snd_soc_dapm_nc_pin(dapm, "RINPUT1");
+	snd_soc_dapm_nc_pin(dapm, "OUT3");
+	snd_soc_dapm_nc_pin(dapm, "ROUT1");
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_enable_pin(dapm, "Internal Speaker");
+	snd_soc_dapm_enable_pin(dapm, "Internal Mic");
+	snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
+
+	/* Headphone jack detection */
+	err = snd_soc_jack_new(codec, "Headphone Jack",
+			       SND_JACK_HEADPHONE, &smartq_jack);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
+				    smartq_jack_pins);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_gpios(&smartq_jack,
+				     ARRAY_SIZE(smartq_jack_gpios),
+				     smartq_jack_gpios);
+
+	return err;
+}
+
+static struct snd_soc_dai_link smartq_dai[] = {
+	{
+		.name		= "wm8987",
+		.stream_name	= "SmartQ Hi-Fi",
+		.cpu_dai_name	= "samsung-i2s.0",
+		.codec_dai_name	= "wm8750-hifi",
+		.platform_name	= "samsung-i2s.0",
+		.codec_name	= "wm8750.0-0x1a",
+		.init		= smartq_wm8987_init,
+		.ops		= &smartq_hifi_ops,
+	},
+};
+
+static struct snd_soc_card snd_soc_smartq = {
+	.name = "SmartQ",
+	.owner = THIS_MODULE,
+	.dai_link = smartq_dai,
+	.num_links = ARRAY_SIZE(smartq_dai),
+
+	.dapm_widgets = wm8987_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
+	.controls = wm8987_smartq_controls,
+	.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
+};
+
+static struct platform_device *smartq_snd_device;
+
+static int __init smartq_init(void)
+{
+	int ret;
+
+	if (!machine_is_smartq7() && !machine_is_smartq5()) {
+		pr_info("Only SmartQ is supported by this ASoC driver\n");
+		return -ENODEV;
+	}
+
+	smartq_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smartq_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
+
+	ret = platform_device_add(smartq_snd_device);
+	if (ret) {
+		platform_device_put(smartq_snd_device);
+		return ret;
+	}
+
+	/* Initialise GPIOs used by amplifiers */
+	ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
+		goto err_unregister_device;
+	}
+
+	/* Disable amplifiers */
+	ret = gpio_direction_output(S3C64XX_GPK(12), 1);
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
+		goto err_free_gpio_amp_shut;
+	}
+
+	return 0;
+
+err_free_gpio_amp_shut:
+	gpio_free(S3C64XX_GPK(12));
+err_unregister_device:
+	platform_device_unregister(smartq_snd_device);
+
+	return ret;
+}
+
+static void __exit smartq_exit(void)
+{
+	gpio_free(S3C64XX_GPK(12));
+	snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
+				smartq_jack_gpios);
+
+	platform_device_unregister(smartq_snd_device);
+}
+
+module_init(smartq_init);
+module_exit(smartq_exit);
+
+/* Module information */
+MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk2443_wm9710.c

@@ -0,0 +1,68 @@
+/*
+ * smdk2443_wm9710.c  --  SoC audio for smdk2443
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+static struct snd_soc_card smdk2443;
+
+static struct snd_soc_dai_link smdk2443_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "ac97-hifi",
+	.codec_name = "ac97-codec",
+	.platform_name = "samsung-ac97",
+},
+};
+
+static struct snd_soc_card smdk2443 = {
+	.name = "SMDK2443",
+	.owner = THIS_MODULE,
+	.dai_link = smdk2443_dai,
+	.num_links = ARRAY_SIZE(smdk2443_dai),
+};
+
+static struct platform_device *smdk2443_snd_ac97_device;
+
+static int __init smdk2443_init(void)
+{
+	int ret;
+
+	smdk2443_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk2443_snd_ac97_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk2443_snd_ac97_device, &smdk2443);
+	ret = platform_device_add(smdk2443_snd_ac97_device);
+
+	if (ret)
+		platform_device_put(smdk2443_snd_ac97_device);
+
+	return ret;
+}
+
+static void __exit smdk2443_exit(void)
+{
+	platform_device_unregister(smdk2443_snd_ac97_device);
+}
+
+module_init(smdk2443_init);
+module_exit(smdk2443_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme.gregory@wolfsonmicro.com, www.wolfsonmicro.com");
+MODULE_DESCRIPTION("ALSA SoC WM9710 SMDK2443");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk_spdif.c

@@ -0,0 +1,223 @@
+/*
+ * smdk_spdif.c  --  S/PDIF audio for SMDK
+ *
+ * Copyright 2010 Samsung Electronics Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+
+#include "spdif.h"
+
+/* Audio clock settings are belonged to board specific part. Every
+ * board can set audio source clock setting which is matched with H/W
+ * like this function-'set_audio_clock_heirachy'.
+ */
+static int set_audio_clock_heirachy(struct platform_device *pdev)
+{
+	struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif;
+	int ret = 0;
+
+	fout_epll = clk_get(NULL, "fout_epll");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_WARNING "%s: Cannot find fout_epll.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	mout_epll = clk_get(NULL, "mout_epll");
+	if (IS_ERR(mout_epll)) {
+		printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out1;
+	}
+
+	sclk_audio0 = clk_get(&pdev->dev, "sclk_audio");
+	if (IS_ERR(sclk_audio0)) {
+		printk(KERN_WARNING "%s: Cannot find sclk_audio.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out2;
+	}
+
+	sclk_spdif = clk_get(NULL, "sclk_spdif");
+	if (IS_ERR(sclk_spdif)) {
+		printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out3;
+	}
+
+	/* Set audio clock hierarchy for S/PDIF */
+	clk_set_parent(mout_epll, fout_epll);
+	clk_set_parent(sclk_audio0, mout_epll);
+	clk_set_parent(sclk_spdif, sclk_audio0);
+
+	clk_put(sclk_spdif);
+out3:
+	clk_put(sclk_audio0);
+out2:
+	clk_put(mout_epll);
+out1:
+	clk_put(fout_epll);
+
+	return ret;
+}
+
+/* We should haved to set clock directly on this part because of clock
+ * scheme of Samsudng SoCs did not support to set rates from abstrct
+ * clock of it's hierarchy.
+ */
+static int set_audio_clock_rate(unsigned long epll_rate,
+				unsigned long audio_rate)
+{
+	struct clk *fout_epll, *sclk_spdif;
+
+	fout_epll = clk_get(NULL, "fout_epll");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_ERR "%s: failed to get fout_epll\n", __func__);
+		return -ENOENT;
+	}
+
+	clk_set_rate(fout_epll, epll_rate);
+	clk_put(fout_epll);
+
+	sclk_spdif = clk_get(NULL, "sclk_spdif");
+	if (IS_ERR(sclk_spdif)) {
+		printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__);
+		return -ENOENT;
+	}
+
+	clk_set_rate(sclk_spdif, audio_rate);
+	clk_put(sclk_spdif);
+
+	return 0;
+}
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned long pll_out, rclk_rate;
+	int ret, ratio;
+
+	switch (params_rate(params)) {
+	case 44100:
+		pll_out = 45158400;
+		break;
+	case 32000:
+	case 48000:
+	case 96000:
+		pll_out = 49152000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Setting ratio to 512fs helps to use S/PDIF with HDMI without
+	 * modify S/PDIF ASoC machine driver.
+	 */
+	ratio = 512;
+	rclk_rate = params_rate(params) * ratio;
+
+	/* Set audio source clock rates */
+	ret = set_audio_clock_rate(pll_out, rclk_rate);
+	if (ret < 0)
+		return ret;
+
+	/* Set S/PDIF uses internal source clock */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK,
+					rclk_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static struct snd_soc_ops smdk_spdif_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+static struct snd_soc_dai_link smdk_dai = {
+	.name = "S/PDIF",
+	.stream_name = "S/PDIF PCM Playback",
+	.platform_name = "samsung-spdif",
+	.cpu_dai_name = "samsung-spdif",
+	.codec_dai_name = "dit-hifi",
+	.codec_name = "spdif-dit",
+	.ops = &smdk_spdif_ops,
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-S/PDIF",
+	.owner = THIS_MODULE,
+	.dai_link = &smdk_dai,
+	.num_links = 1,
+};
+
+static struct platform_device *smdk_snd_spdif_dit_device;
+static struct platform_device *smdk_snd_spdif_device;
+
+static int __init smdk_init(void)
+{
+	int ret;
+
+	smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1);
+	if (!smdk_snd_spdif_dit_device)
+		return -ENOMEM;
+
+	ret = platform_device_add(smdk_snd_spdif_dit_device);
+	if (ret)
+		goto err1;
+
+	smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_spdif_device) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	platform_set_drvdata(smdk_snd_spdif_device, &smdk);
+
+	ret = platform_device_add(smdk_snd_spdif_device);
+	if (ret)
+		goto err3;
+
+	/* Set audio clock hierarchy manually */
+	ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
+	if (ret)
+		goto err4;
+
+	return 0;
+err4:
+	platform_device_del(smdk_snd_spdif_device);
+err3:
+	platform_device_put(smdk_snd_spdif_device);
+err2:
+	platform_device_del(smdk_snd_spdif_dit_device);
+err1:
+	platform_device_put(smdk_snd_spdif_dit_device);
+	return ret;
+}
+
+static void __exit smdk_exit(void)
+{
+	platform_device_unregister(smdk_snd_spdif_device);
+	platform_device_unregister(smdk_snd_spdif_dit_device);
+}
+
+module_init(smdk_init);
+module_exit(smdk_exit);
+
+MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk_wm8580.c

@@ -0,0 +1,255 @@
+/*
+ *  smdk_wm8580.c
+ *
+ *  Copyright (c) 2009 Samsung Electronics Co. Ltd
+ *  Author: Jaswinder Singh <jassisinghbrar@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8580.h"
+#include "i2s.h"
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
+ */
+
+/* SMDK has a 12MHZ crystal attached to WM8580 */
+#define SMDK_WM8580_FREQ 12000000
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out;
+	int bfs, rfs, ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_U8:
+	case SNDRV_PCM_FORMAT_S8:
+		bfs = 16;
+		break;
+	case SNDRV_PCM_FORMAT_U16_LE:
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bfs = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
+	 * This criterion can't be met if we request PLL output
+	 * as {8000x256, 64000x256, 11025x256}Hz.
+	 * As a wayout, we rather change rfs to a minimum value that
+	 * results in (params_rate(params) * rfs), and itself, acceptable
+	 * to both - the CODEC and the CPU.
+	 */
+	switch (params_rate(params)) {
+	case 16000:
+	case 22050:
+	case 32000:
+	case 44100:
+	case 48000:
+	case 88200:
+	case 96000:
+		rfs = 256;
+		break;
+	case 64000:
+		rfs = 384;
+		break;
+	case 8000:
+	case 11025:
+		rfs = 512;
+		break;
+	default:
+		return -EINVAL;
+	}
+	pll_out = params_rate(params) * rfs;
+
+	/* Set the Codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set the AP DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set WM8580 to drive MCLK from its PLLA */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+					WM8580_CLKSRC_PLLA);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+					SMDK_WM8580_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
+				     pll_out, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK WM8580 DAI operations.
+ */
+static struct snd_soc_ops smdk_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+/* SMDK Playback widgets */
+static const struct snd_soc_dapm_widget smdk_wm8580_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Front", NULL),
+	SND_SOC_DAPM_HP("Center+Sub", NULL),
+	SND_SOC_DAPM_HP("Rear", NULL),
+
+	SND_SOC_DAPM_MIC("MicIn", NULL),
+	SND_SOC_DAPM_LINE("LineIn", NULL),
+};
+
+/* SMDK-PAIFTX connections */
+static const struct snd_soc_dapm_route smdk_wm8580_audio_map[] = {
+	/* MicIn feeds AINL */
+	{"AINL", NULL, "MicIn"},
+
+	/* LineIn feeds AINL/R */
+	{"AINL", NULL, "LineIn"},
+	{"AINR", NULL, "LineIn"},
+
+	/* Front Left/Right are fed VOUT1L/R */
+	{"Front", NULL, "VOUT1L"},
+	{"Front", NULL, "VOUT1R"},
+
+	/* Center/Sub are fed VOUT2L/R */
+	{"Center+Sub", NULL, "VOUT2L"},
+	{"Center+Sub", NULL, "VOUT2R"},
+
+	/* Rear Left/Right are fed VOUT3L/R */
+	{"Rear", NULL, "VOUT3L"},
+	{"Rear", NULL, "VOUT3R"},
+};
+
+static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	/* Enabling the microphone requires the fitting of a 0R
+	 * resistor to connect the line from the microphone jack.
+	 */
+	snd_soc_dapm_disable_pin(dapm, "MicIn");
+
+	return 0;
+}
+
+enum {
+	PRI_PLAYBACK = 0,
+	PRI_CAPTURE,
+	SEC_PLAYBACK,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	[PRI_PLAYBACK] = { /* Primary Playback i/f */
+		.name = "WM8580 PAIF RX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8580.0-001b",
+		.ops = &smdk_ops,
+	},
+	[PRI_CAPTURE] = { /* Primary Capture i/f */
+		.name = "WM8580 PAIF TX",
+		.stream_name = "Capture",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8580-hifi-capture",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8580.0-001b",
+		.init = smdk_wm8580_init_paiftx,
+		.ops = &smdk_ops,
+	},
+	[SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */
+		.name = "Sec_FIFO TX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s-sec",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-i2s-sec",
+		.codec_name = "wm8580.0-001b",
+		.ops = &smdk_ops,
+	},
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-I2S",
+	.owner = THIS_MODULE,
+	.dai_link = smdk_dai,
+	.num_links = 2,
+
+	.dapm_widgets = smdk_wm8580_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(smdk_wm8580_dapm_widgets),
+	.dapm_routes = smdk_wm8580_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(smdk_wm8580_audio_map),
+};
+
+static struct platform_device *smdk_snd_device;
+
+static int __init smdk_audio_init(void)
+{
+	int ret;
+	char *str;
+
+	if (machine_is_smdkc100()
+			|| machine_is_smdkv210() || machine_is_smdkc110()) {
+		smdk.num_links = 3;
+	} else if (machine_is_smdk6410()) {
+		str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '2';
+		str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name;
+		str[strlen(str) - 1] = '2';
+	}
+
+	smdk_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk_snd_device, &smdk);
+	ret = platform_device_add(smdk_snd_device);
+
+	if (ret)
+		platform_device_put(smdk_snd_device);
+
+	return ret;
+}
+module_init(smdk_audio_init);
+
+static void __exit smdk_audio_exit(void)
+{
+	platform_device_unregister(smdk_snd_device);
+}
+module_exit(smdk_audio_exit);
+
+MODULE_AUTHOR("Jaswinder Singh, jassisinghbrar@gmail.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk_wm8580pcm.c

@@ -0,0 +1,196 @@
+/*
+ *  sound/soc/samsung/smdk_wm8580pcm.c
+ *
+ *  Copyright (c) 2011 Samsung Electronics Co. Ltd
+ *
+ *  This program is free software; you can redistribute  it and/or  modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/pcm.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8580.h"
+#include "dma.h"
+#include "pcm.h"
+
+/*
+ * Board Settings:
+ *  o '1' means 'ON'
+ *  o '0' means 'OFF'
+ *  o 'X' means 'Don't care'
+ *
+ * SMDK6410, SMDK6440, SMDK6450 Base B/D: CFG1-0000, CFG2-1111
+ * SMDKC110, SMDKV210: CFGB11-100100, CFGB12-0000
+ */
+
+#define SMDK_WM8580_EXT_OSC 12000000
+#define SMDK_WM8580_EXT_MCLK 4096000
+#define SMDK_WM8580_EXT_VOICE 2048000
+
+static unsigned long mclk_freq;
+static unsigned long xtal_freq;
+
+/*
+ * If MCLK clock directly gets from XTAL, we don't have to use PLL
+ * to make MCLK, but if XTAL clock source connects with other codec
+ * pin (like XTI), we should have to set codec's PLL to make MCLK.
+ * Because Samsung SoC does not support pcmcdclk output like I2S.
+ */
+
+static int smdk_wm8580_pcm_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int rfs, ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+		break;
+	default:
+		printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n",
+		__func__, __LINE__, params_rate(params));
+		return -EINVAL;
+	}
+
+	rfs = mclk_freq / params_rate(params) / 2;
+
+	/* Set the codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* Set the cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	if (mclk_freq == xtal_freq) {
+		ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_MCLK,
+						mclk_freq, SND_SOC_CLOCK_IN);
+		if (ret < 0)
+			return ret;
+
+		ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+						WM8580_CLKSRC_MCLK);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
+						mclk_freq, SND_SOC_CLOCK_IN);
+		if (ret < 0)
+			return ret;
+
+		ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+						WM8580_CLKSRC_PLLA);
+		if (ret < 0)
+			return ret;
+
+		ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+						xtal_freq, mclk_freq);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Set PCM source clock on CPU */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
+					mclk_freq, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Set SCLK_DIV for making bclk */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops smdk_wm8580_pcm_ops = {
+	.hw_params = smdk_wm8580_pcm_hw_params,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	{
+		.name = "WM8580 PAIF PCM RX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-pcm.0",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580.0-001b",
+		.ops = &smdk_wm8580_pcm_ops,
+	}, {
+		.name = "WM8580 PAIF PCM TX",
+		.stream_name = "Capture",
+		.cpu_dai_name = "samsung-pcm.0",
+		.codec_dai_name = "wm8580-hifi-capture",
+		.platform_name = "samsung-pcm.0",
+		.codec_name = "wm8580.0-001b",
+		.ops = &smdk_wm8580_pcm_ops,
+	},
+};
+
+static struct snd_soc_card smdk_pcm = {
+	.name = "SMDK-PCM",
+	.owner = THIS_MODULE,
+	.dai_link = smdk_dai,
+	.num_links = 2,
+};
+
+/*
+ * After SMDKC110 Base Board's Rev is '0.1', 12MHz External OSC(X1)
+ * is absent (or not connected), so we connect EXT_VOICE_CLK(OSC4),
+ * 2.0484Mhz, directly with MCLK both Codec and SoC.
+ */
+static int snd_smdk_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	xtal_freq = SMDK_WM8580_EXT_OSC;
+	mclk_freq = SMDK_WM8580_EXT_MCLK;
+
+	if (machine_is_smdkc110() || machine_is_smdkv210())
+		xtal_freq = mclk_freq = SMDK_WM8580_EXT_VOICE;
+
+	smdk_pcm.dev = &pdev->dev;
+	ret = snd_soc_register_card(&smdk_pcm);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int snd_smdk_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_card(&smdk_pcm);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver snd_smdk_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "samsung-smdk-pcm",
+	},
+	.probe = snd_smdk_probe,
+	.remove = snd_smdk_remove,
+};
+
+module_platform_driver(snd_smdk_driver);
+
+MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8580 for PCM");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk_wm8994.c

@@ -0,0 +1,215 @@
+/*
+ *  smdk_wm8994.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include "../codecs/wm8994.h"
+#include <sound/pcm_params.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+ /*
+  * Default CFG switch settings to use this driver:
+  *	SMDKV310: CFG5-1000, CFG7-111111
+  */
+
+ /*
+  * Configure audio route as :-
+  * $ amixer sset 'DAC1' on,on
+  * $ amixer sset 'Right Headphone Mux' 'DAC'
+  * $ amixer sset 'Left Headphone Mux' 'DAC'
+  * $ amixer sset 'DAC1R Mixer AIF1.1' on
+  * $ amixer sset 'DAC1L Mixer AIF1.1' on
+  * $ amixer sset 'IN2L' on
+  * $ amixer sset 'IN2L PGA IN2LN' on
+  * $ amixer sset 'MIXINL IN2L' on
+  * $ amixer sset 'AIF1ADC1L Mixer ADC/DMIC' on
+  * $ amixer sset 'IN2R' on
+  * $ amixer sset 'IN2R PGA IN2RN' on
+  * $ amixer sset 'MIXINR IN2R' on
+  * $ amixer sset 'AIF1ADC1R Mixer ADC/DMIC' on
+  */
+
+/* SMDK has a 16.934MHZ crystal attached to WM8994 */
+#define SMDK_WM8994_FREQ 16934000
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out;
+	int ret;
+
+	/* AIF1CLK should be >=3MHz for optimal performance */
+	if (params_format(params) == SNDRV_PCM_FORMAT_S24_LE)
+		pll_out = params_rate(params) * 384;
+	else if (params_rate(params) == 8000 || params_rate(params) == 11025)
+		pll_out = params_rate(params) * 512;
+	else
+		pll_out = params_rate(params) * 256;
+
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+					SMDK_WM8994_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+					pll_out, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK WM8994 DAI operations.
+ */
+static struct snd_soc_ops smdk_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+static int smdk_wm8994_init_paiftx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+
+	/* HeadPhone */
+	snd_soc_dapm_enable_pin(dapm, "HPOUT1R");
+	snd_soc_dapm_enable_pin(dapm, "HPOUT1L");
+
+	/* MicIn */
+	snd_soc_dapm_enable_pin(dapm, "IN1LN");
+	snd_soc_dapm_enable_pin(dapm, "IN1RN");
+
+	/* LineIn */
+	snd_soc_dapm_enable_pin(dapm, "IN2LN");
+	snd_soc_dapm_enable_pin(dapm, "IN2RN");
+
+	/* Other pins NC */
+	snd_soc_dapm_nc_pin(dapm, "HPOUT2P");
+	snd_soc_dapm_nc_pin(dapm, "HPOUT2N");
+	snd_soc_dapm_nc_pin(dapm, "SPKOUTLN");
+	snd_soc_dapm_nc_pin(dapm, "SPKOUTLP");
+	snd_soc_dapm_nc_pin(dapm, "SPKOUTRP");
+	snd_soc_dapm_nc_pin(dapm, "SPKOUTRN");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT1N");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT1P");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT2N");
+	snd_soc_dapm_nc_pin(dapm, "LINEOUT2P");
+	snd_soc_dapm_nc_pin(dapm, "IN1LP");
+	snd_soc_dapm_nc_pin(dapm, "IN2LP:VXRN");
+	snd_soc_dapm_nc_pin(dapm, "IN1RP");
+	snd_soc_dapm_nc_pin(dapm, "IN2RP:VXRP");
+
+	return 0;
+}
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	{ /* Primary DAI i/f */
+		.name = "WM8994 AIF1",
+		.stream_name = "Pri_Dai",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8994-aif1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8994-codec",
+		.init = smdk_wm8994_init_paiftx,
+		.ops = &smdk_ops,
+	}, { /* Sec_Fifo Playback i/f */
+		.name = "Sec_FIFO TX",
+		.stream_name = "Sec_Dai",
+		.cpu_dai_name = "samsung-i2s-sec",
+		.codec_dai_name = "wm8994-aif1",
+		.platform_name = "samsung-i2s-sec",
+		.codec_name = "wm8994-codec",
+		.ops = &smdk_ops,
+	},
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-I2S",
+	.owner = THIS_MODULE,
+	.dai_link = smdk_dai,
+	.num_links = ARRAY_SIZE(smdk_dai),
+};
+
+
+static int smdk_audio_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *np = pdev->dev.of_node;
+	struct snd_soc_card *card = &smdk;
+
+	card->dev = &pdev->dev;
+
+	if (np) {
+		smdk_dai[0].cpu_dai_name = NULL;
+		smdk_dai[0].cpu_of_node = of_parse_phandle(np,
+				"samsung,i2s-controller", 0);
+		if (!smdk_dai[0].cpu_of_node) {
+			dev_err(&pdev->dev,
+			   "Property 'samsung,i2s-controller' missing or invalid\n");
+			ret = -EINVAL;
+		}
+
+		smdk_dai[0].platform_name = NULL;
+		smdk_dai[0].platform_of_node = smdk_dai[0].cpu_of_node;
+	}
+
+	ret = snd_soc_register_card(card);
+
+	if (ret)
+		dev_err(&pdev->dev, "snd_soc_register_card() failed:%d\n", ret);
+
+	return ret;
+}
+
+static int smdk_audio_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_wm8994_of_match[] = {
+	{ .compatible = "samsung,smdk-wm8994", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_wm8994_of_match);
+#endif /* CONFIG_OF */
+
+static struct platform_driver smdk_audio_driver = {
+	.driver		= {
+		.name	= "smdk-audio",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(samsung_wm8994_of_match),
+	},
+	.probe		= smdk_audio_probe,
+	.remove		= smdk_audio_remove,
+};
+
+module_platform_driver(smdk_audio_driver);
+
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8994");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:smdk-audio");

sound/soc/samsung/smdk_wm8994pcm.c

@@ -0,0 +1,166 @@
+/*
+ *  sound/soc/samsung/smdk_wm8994pcm.c
+ *
+ *  Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or  modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/wm8994.h"
+#include "dma.h"
+#include "pcm.h"
+
+/*
+ * Board Settings:
+ *  o '1' means 'ON'
+ *  o '0' means 'OFF'
+ *  o 'X' means 'Don't care'
+ *
+ * SMDKC210, SMDKV310: CFG3- 1001, CFG5-1000, CFG7-111111
+ */
+
+/*
+ * Configure audio route as :-
+ * $ amixer sset 'DAC1' on,on
+ * $ amixer sset 'Right Headphone Mux' 'DAC'
+ * $ amixer sset 'Left Headphone Mux' 'DAC'
+ * $ amixer sset 'DAC1R Mixer AIF1.1' on
+ * $ amixer sset 'DAC1L Mixer AIF1.1' on
+ * $ amixer sset 'IN2L' on
+ * $ amixer sset 'IN2L PGA IN2LN' on
+ * $ amixer sset 'MIXINL IN2L' on
+ * $ amixer sset 'AIF1ADC1L Mixer ADC/DMIC' on
+ * $ amixer sset 'IN2R' on
+ * $ amixer sset 'IN2R PGA IN2RN' on
+ * $ amixer sset 'MIXINR IN2R' on
+ * $ amixer sset 'AIF1ADC1R Mixer ADC/DMIC' on
+ */
+
+/* SMDK has a 16.9344MHZ crystal attached to WM8994 */
+#define SMDK_WM8994_FREQ 16934400
+
+static int smdk_wm8994_pcm_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned long mclk_freq;
+	int rfs, ret;
+
+	switch(params_rate(params)) {
+	case 8000:
+		rfs = 512;
+		break;
+	default:
+		dev_err(cpu_dai->dev, "%s:%d Sampling Rate %u not supported!\n",
+		__func__, __LINE__, params_rate(params));
+		return -EINVAL;
+	}
+
+	mclk_freq = params_rate(params) * rfs;
+
+	/* Set the codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* Set the cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+					mclk_freq, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+					SMDK_WM8994_FREQ, mclk_freq);
+	if (ret < 0)
+		return ret;
+
+	/* Set PCM source clock on CPU */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
+					mclk_freq, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Set SCLK_DIV for making bclk */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops smdk_wm8994_pcm_ops = {
+	.hw_params = smdk_wm8994_pcm_hw_params,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	{
+		.name = "WM8994 PAIF PCM",
+		.stream_name = "Primary PCM",
+		.cpu_dai_name = "samsung-pcm.0",
+		.codec_dai_name = "wm8994-aif1",
+		.platform_name = "samsung-pcm.0",
+		.codec_name = "wm8994-codec",
+		.ops = &smdk_wm8994_pcm_ops,
+	},
+};
+
+static struct snd_soc_card smdk_pcm = {
+	.name = "SMDK-PCM",
+	.owner = THIS_MODULE,
+	.dai_link = smdk_dai,
+	.num_links = 1,
+};
+
+static int snd_smdk_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	smdk_pcm.dev = &pdev->dev;
+	ret = snd_soc_register_card(&smdk_pcm);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int snd_smdk_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_card(&smdk_pcm);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver snd_smdk_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "samsung-smdk-pcm",
+	},
+	.probe = snd_smdk_probe,
+	.remove = snd_smdk_remove,
+};
+
+module_platform_driver(snd_smdk_driver);
+
+MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8994 for PCM");
+MODULE_LICENSE("GPL");

sound/soc/samsung/smdk_wm9713.c

@@ -0,0 +1,108 @@
+/*
+ * smdk_wm9713.c  --  SoC audio for SMDK
+ *
+ * Copyright 2010 Samsung Electronics Co. Ltd.
+ * Author: Jaswinder Singh Brar <jassisinghbrar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+static struct snd_soc_card smdk;
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off
+ *   SMDKC100: Set CFG6 1-3 On, CFG7 1   On
+ *   SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On
+ *   SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On
+ *   SMDKV310: Set CFG2 1-2 Off, CFG4 All On, CFG7 All Off, CFG8 1-On
+ */
+
+/*
+ Playback (HeadPhone):-
+	$ amixer sset 'Headphone' unmute
+	$ amixer sset 'Right Headphone Out Mux' 'Headphone'
+	$ amixer sset 'Left Headphone Out Mux' 'Headphone'
+	$ amixer sset 'Right HP Mixer PCM' unmute
+	$ amixer sset 'Left HP Mixer PCM' unmute
+
+ Capture (LineIn):-
+	$ amixer sset 'Right Capture Source' 'Line'
+	$ amixer sset 'Left Capture Source' 'Line'
+*/
+
+static struct snd_soc_dai_link smdk_dai = {
+	.name = "AC97",
+	.stream_name = "AC97 PCM",
+	.platform_name = "samsung-ac97",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "wm9713-hifi",
+	.codec_name = "wm9713-codec",
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK WM9713",
+	.owner = THIS_MODULE,
+	.dai_link = &smdk_dai,
+	.num_links = 1,
+};
+
+static struct platform_device *smdk_snd_wm9713_device;
+static struct platform_device *smdk_snd_ac97_device;
+
+static int __init smdk_init(void)
+{
+	int ret;
+
+	smdk_snd_wm9713_device = platform_device_alloc("wm9713-codec", -1);
+	if (!smdk_snd_wm9713_device)
+		return -ENOMEM;
+
+	ret = platform_device_add(smdk_snd_wm9713_device);
+	if (ret)
+		goto err1;
+
+	smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_ac97_device) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	platform_set_drvdata(smdk_snd_ac97_device, &smdk);
+
+	ret = platform_device_add(smdk_snd_ac97_device);
+	if (ret)
+		goto err3;
+
+	return 0;
+
+err3:
+	platform_device_put(smdk_snd_ac97_device);
+err2:
+	platform_device_del(smdk_snd_wm9713_device);
+err1:
+	platform_device_put(smdk_snd_wm9713_device);
+	return ret;
+}
+
+static void __exit smdk_exit(void)
+{
+	platform_device_unregister(smdk_snd_ac97_device);
+	platform_device_unregister(smdk_snd_wm9713_device);
+}
+
+module_init(smdk_init);
+module_exit(smdk_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh Brar, jassisinghbrar@gmail.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713");
+MODULE_LICENSE("GPL");

sound/soc/samsung/spdif.c

@@ -0,0 +1,504 @@
+/* sound/soc/samsung/spdif.c
+ *
+ * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include <linux/platform_data/asoc-s3c.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+#include "spdif.h"
+
+/* Registers */
+#define CLKCON				0x00
+#define CON				0x04
+#define BSTAS				0x08
+#define CSTAS				0x0C
+#define DATA_OUTBUF			0x10
+#define DCNT				0x14
+#define BSTAS_S				0x18
+#define DCNT_S				0x1C
+
+#define CLKCTL_MASK			0x7
+#define CLKCTL_MCLK_EXT			(0x1 << 2)
+#define CLKCTL_PWR_ON			(0x1 << 0)
+
+#define CON_MASK			0x3ffffff
+#define CON_FIFO_TH_SHIFT		19
+#define CON_FIFO_TH_MASK		(0x7 << 19)
+#define CON_USERDATA_23RDBIT		(0x1 << 12)
+
+#define CON_SW_RESET			(0x1 << 5)
+
+#define CON_MCLKDIV_MASK		(0x3 << 3)
+#define CON_MCLKDIV_256FS		(0x0 << 3)
+#define CON_MCLKDIV_384FS		(0x1 << 3)
+#define CON_MCLKDIV_512FS		(0x2 << 3)
+
+#define CON_PCM_MASK			(0x3 << 1)
+#define CON_PCM_16BIT			(0x0 << 1)
+#define CON_PCM_20BIT			(0x1 << 1)
+#define CON_PCM_24BIT			(0x2 << 1)
+
+#define CON_PCM_DATA			(0x1 << 0)
+
+#define CSTAS_MASK			0x3fffffff
+#define CSTAS_SAMP_FREQ_MASK		(0xF << 24)
+#define CSTAS_SAMP_FREQ_44		(0x0 << 24)
+#define CSTAS_SAMP_FREQ_48		(0x2 << 24)
+#define CSTAS_SAMP_FREQ_32		(0x3 << 24)
+#define CSTAS_SAMP_FREQ_96		(0xA << 24)
+
+#define CSTAS_CATEGORY_MASK		(0xFF << 8)
+#define CSTAS_CATEGORY_CODE_CDP		(0x01 << 8)
+
+#define CSTAS_NO_COPYRIGHT		(0x1 << 2)
+
+/**
+ * struct samsung_spdif_info - Samsung S/PDIF Controller information
+ * @lock: Spin lock for S/PDIF.
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @clk_rate: Current clock rate for calcurate ratio.
+ * @pclk: The peri-clock pointer for spdif master operation.
+ * @sclk: The source clock pointer for making sync signals.
+ * @save_clkcon: Backup clkcon reg. in suspend.
+ * @save_con: Backup con reg. in suspend.
+ * @save_cstas: Backup cstas reg. in suspend.
+ * @dma_playback: DMA information for playback channel.
+ */
+struct samsung_spdif_info {
+	spinlock_t	lock;
+	struct device	*dev;
+	void __iomem	*regs;
+	unsigned long	clk_rate;
+	struct clk	*pclk;
+	struct clk	*sclk;
+	u32		saved_clkcon;
+	u32		saved_con;
+	u32		saved_cstas;
+	struct s3c_dma_params	*dma_playback;
+};
+
+static struct s3c2410_dma_client spdif_dma_client_out = {
+	.name		= "S/PDIF Stereo out",
+};
+
+static struct s3c_dma_params spdif_stereo_out;
+static struct samsung_spdif_info spdif_info;
+
+static inline struct samsung_spdif_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+	return snd_soc_dai_get_drvdata(cpu_dai);
+}
+
+static void spdif_snd_txctrl(struct samsung_spdif_info *spdif, int on)
+{
+	void __iomem *regs = spdif->regs;
+	u32 clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+	if (on)
+		writel(clkcon | CLKCTL_PWR_ON, regs + CLKCON);
+	else
+		writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
+}
+
+static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai,
+				int clk_id, unsigned int freq, int dir)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+	u32 clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	clkcon = readl(spdif->regs + CLKCON);
+
+	if (clk_id == SND_SOC_SPDIF_INT_MCLK)
+		clkcon &= ~CLKCTL_MCLK_EXT;
+	else
+		clkcon |= CLKCTL_MCLK_EXT;
+
+	writel(clkcon, spdif->regs + CLKCON);
+
+	spdif->clk_rate = freq;
+
+	return 0;
+}
+
+static int spdif_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&spdif->lock, flags);
+		spdif_snd_txctrl(spdif, 1);
+		spin_unlock_irqrestore(&spdif->lock, flags);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&spdif->lock, flags);
+		spdif_snd_txctrl(spdif, 0);
+		spin_unlock_irqrestore(&spdif->lock, flags);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int spdif_sysclk_ratios[] = {
+	512, 384, 256,
+};
+
+static int spdif_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	void __iomem *regs = spdif->regs;
+	struct s3c_dma_params *dma_data;
+	u32 con, clkcon, cstas;
+	unsigned long flags;
+	int i, ratio;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = spdif->dma_playback;
+	else {
+		dev_err(spdif->dev, "Capture is not supported\n");
+		return -EINVAL;
+	}
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	spin_lock_irqsave(&spdif->lock, flags);
+
+	con = readl(regs + CON) & CON_MASK;
+	cstas = readl(regs + CSTAS) & CSTAS_MASK;
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+
+	con &= ~CON_FIFO_TH_MASK;
+	con |= (0x7 << CON_FIFO_TH_SHIFT);
+	con |= CON_USERDATA_23RDBIT;
+	con |= CON_PCM_DATA;
+
+	con &= ~CON_PCM_MASK;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		con |= CON_PCM_16BIT;
+		break;
+	default:
+		dev_err(spdif->dev, "Unsupported data size.\n");
+		goto err;
+	}
+
+	ratio = spdif->clk_rate / params_rate(params);
+	for (i = 0; i < ARRAY_SIZE(spdif_sysclk_ratios); i++)
+		if (ratio == spdif_sysclk_ratios[i])
+			break;
+	if (i == ARRAY_SIZE(spdif_sysclk_ratios)) {
+		dev_err(spdif->dev, "Invalid clock ratio %ld/%d\n",
+				spdif->clk_rate, params_rate(params));
+		goto err;
+	}
+
+	con &= ~CON_MCLKDIV_MASK;
+	switch (ratio) {
+	case 256:
+		con |= CON_MCLKDIV_256FS;
+		break;
+	case 384:
+		con |= CON_MCLKDIV_384FS;
+		break;
+	case 512:
+		con |= CON_MCLKDIV_512FS;
+		break;
+	}
+
+	cstas &= ~CSTAS_SAMP_FREQ_MASK;
+	switch (params_rate(params)) {
+	case 44100:
+		cstas |= CSTAS_SAMP_FREQ_44;
+		break;
+	case 48000:
+		cstas |= CSTAS_SAMP_FREQ_48;
+		break;
+	case 32000:
+		cstas |= CSTAS_SAMP_FREQ_32;
+		break;
+	case 96000:
+		cstas |= CSTAS_SAMP_FREQ_96;
+		break;
+	default:
+		dev_err(spdif->dev, "Invalid sampling rate %d\n",
+				params_rate(params));
+		goto err;
+	}
+
+	cstas &= ~CSTAS_CATEGORY_MASK;
+	cstas |= CSTAS_CATEGORY_CODE_CDP;
+	cstas |= CSTAS_NO_COPYRIGHT;
+
+	writel(con, regs + CON);
+	writel(cstas, regs + CSTAS);
+	writel(clkcon, regs + CLKCON);
+
+	spin_unlock_irqrestore(&spdif->lock, flags);
+
+	return 0;
+err:
+	spin_unlock_irqrestore(&spdif->lock, flags);
+	return -EINVAL;
+}
+
+static void spdif_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	void __iomem *regs = spdif->regs;
+	u32 con, clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	con = readl(regs + CON) & CON_MASK;
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+
+	writel(con | CON_SW_RESET, regs + CON);
+	cpu_relax();
+
+	writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
+}
+
+#ifdef CONFIG_PM
+static int spdif_suspend(struct snd_soc_dai *cpu_dai)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+	u32 con = spdif->saved_con;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	spdif->saved_clkcon = readl(spdif->regs	+ CLKCON) & CLKCTL_MASK;
+	spdif->saved_con = readl(spdif->regs + CON) & CON_MASK;
+	spdif->saved_cstas = readl(spdif->regs + CSTAS) & CSTAS_MASK;
+
+	writel(con | CON_SW_RESET, spdif->regs + CON);
+	cpu_relax();
+
+	return 0;
+}
+
+static int spdif_resume(struct snd_soc_dai *cpu_dai)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	writel(spdif->saved_clkcon, spdif->regs	+ CLKCON);
+	writel(spdif->saved_con, spdif->regs + CON);
+	writel(spdif->saved_cstas, spdif->regs + CSTAS);
+
+	return 0;
+}
+#else
+#define spdif_suspend NULL
+#define spdif_resume NULL
+#endif
+
+static const struct snd_soc_dai_ops spdif_dai_ops = {
+	.set_sysclk	= spdif_set_sysclk,
+	.trigger	= spdif_trigger,
+	.hw_params	= spdif_hw_params,
+	.shutdown	= spdif_shutdown,
+};
+
+static struct snd_soc_dai_driver samsung_spdif_dai = {
+	.name = "samsung-spdif",
+	.playback = {
+		.stream_name = "S/PDIF Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = (SNDRV_PCM_RATE_32000 |
+				SNDRV_PCM_RATE_44100 |
+				SNDRV_PCM_RATE_48000 |
+				SNDRV_PCM_RATE_96000),
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+	.ops = &spdif_dai_ops,
+	.suspend = spdif_suspend,
+	.resume = spdif_resume,
+};
+
+static const struct snd_soc_component_driver samsung_spdif_component = {
+	.name		= "samsung-spdif",
+};
+
+static int spdif_probe(struct platform_device *pdev)
+{
+	struct s3c_audio_pdata *spdif_pdata;
+	struct resource *mem_res, *dma_res;
+	struct samsung_spdif_info *spdif;
+	int ret;
+
+	spdif_pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "Entered %s\n", __func__);
+
+	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dma_res) {
+		dev_err(&pdev->dev, "Unable to get dma resource.\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource.\n");
+		return -ENXIO;
+	}
+
+	if (spdif_pdata && spdif_pdata->cfg_gpio
+			&& spdif_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure GPIO pins\n");
+		return -EINVAL;
+	}
+
+	spdif = &spdif_info;
+	spdif->dev = &pdev->dev;
+
+	spin_lock_init(&spdif->lock);
+
+	spdif->pclk = clk_get(&pdev->dev, "spdif");
+	if (IS_ERR(spdif->pclk)) {
+		dev_err(&pdev->dev, "failed to get peri-clock\n");
+		ret = -ENOENT;
+		goto err0;
+	}
+	clk_prepare_enable(spdif->pclk);
+
+	spdif->sclk = clk_get(&pdev->dev, "sclk_spdif");
+	if (IS_ERR(spdif->sclk)) {
+		dev_err(&pdev->dev, "failed to get internal source clock\n");
+		ret = -ENOENT;
+		goto err1;
+	}
+	clk_prepare_enable(spdif->sclk);
+
+	/* Request S/PDIF Register's memory region */
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-spdif")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	spdif->regs = ioremap(mem_res->start, 0x100);
+	if (spdif->regs == NULL) {
+		dev_err(&pdev->dev, "Cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	dev_set_drvdata(&pdev->dev, spdif);
+
+	ret = snd_soc_register_component(&pdev->dev, &samsung_spdif_component,
+					 &samsung_spdif_dai, 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "fail to register dai\n");
+		goto err4;
+	}
+
+	spdif_stereo_out.dma_size = 2;
+	spdif_stereo_out.client = &spdif_dma_client_out;
+	spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF;
+	spdif_stereo_out.channel = dma_res->start;
+
+	spdif->dma_playback = &spdif_stereo_out;
+
+	ret = asoc_dma_platform_register(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register DMA: %d\n", ret);
+		goto err5;
+	}
+
+	return 0;
+err5:
+	snd_soc_unregister_component(&pdev->dev);
+err4:
+	iounmap(spdif->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable_unprepare(spdif->sclk);
+	clk_put(spdif->sclk);
+err1:
+	clk_disable_unprepare(spdif->pclk);
+	clk_put(spdif->pclk);
+err0:
+	return ret;
+}
+
+static int spdif_remove(struct platform_device *pdev)
+{
+	struct samsung_spdif_info *spdif = &spdif_info;
+	struct resource *mem_res;
+
+	asoc_dma_platform_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
+
+	iounmap(spdif->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res)
+		release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable_unprepare(spdif->sclk);
+	clk_put(spdif->sclk);
+	clk_disable_unprepare(spdif->pclk);
+	clk_put(spdif->pclk);
+
+	return 0;
+}
+
+static struct platform_driver samsung_spdif_driver = {
+	.probe	= spdif_probe,
+	.remove	= spdif_remove,
+	.driver	= {
+		.name	= "samsung-spdif",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(samsung_spdif_driver);
+
+MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
+MODULE_DESCRIPTION("Samsung S/PDIF Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-spdif");

sound/soc/samsung/spdif.h

@@ -0,0 +1,19 @@
+/* sound/soc/samsung/spdif.h
+ *
+ * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_SPDIF_H
+#define __SND_SOC_SAMSUNG_SPDIF_H	__FILE__
+
+#define SND_SOC_SPDIF_INT_MCLK		0
+#define SND_SOC_SPDIF_EXT_MCLK		1
+
+#endif	/* __SND_SOC_SAMSUNG_SPDIF_H */

sound/soc/samsung/speyside.c

@@ -0,0 +1,364 @@
+/*
+ * Speyside audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include "../codecs/wm8996.h"
+#include "../codecs/wm9081.h"
+
+#define WM8996_HPSEL_GPIO 214
+#define MCLK_AUDIO_RATE (512 * 48000)
+
+static int speyside_set_bias_level(struct snd_soc_card *card,
+				   struct snd_soc_dapm_context *dapm,
+				   enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[1].codec_dai;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,
+					     32768, SND_SOC_CLOCK_IN);
+		if (ret < 0)
+			return ret;
+
+		ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,
+					  0, 0, 0);
+		if (ret < 0) {
+			pr_err("Failed to stop FLL\n");
+			return ret;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int speyside_set_bias_level_post(struct snd_soc_card *card,
+					struct snd_soc_dapm_context *dapm,
+					enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[1].codec_dai;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_PREPARE:
+		if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
+			ret = snd_soc_dai_set_pll(codec_dai, 0,
+						  WM8996_FLL_MCLK2,
+						  32768, MCLK_AUDIO_RATE);
+			if (ret < 0) {
+				pr_err("Failed to start FLL\n");
+				return ret;
+			}
+
+			ret = snd_soc_dai_set_sysclk(codec_dai,
+						     WM8996_SYSCLK_FLL,
+						     MCLK_AUDIO_RATE,
+						     SND_SOC_CLOCK_IN);
+			if (ret < 0)
+				return ret;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	card->dapm.bias_level = level;
+
+	return 0;
+}
+
+static struct snd_soc_jack speyside_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin speyside_headset_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+/* Default the headphone selection to active high */
+static int speyside_jack_polarity;
+
+static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
+				struct snd_soc_dapm_widget *sink)
+{
+	if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0))
+		return 1;
+	if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0))
+		return 1;
+
+	return 0;
+}
+
+static void speyside_set_polarity(struct snd_soc_codec *codec,
+				  int polarity)
+{
+	speyside_jack_polarity = !polarity;
+	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
+
+	/* Re-run DAPM to make sure we're using the correct mic bias */
+	snd_soc_dapm_sync(&codec->dapm);
+}
+
+static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *dai = rtd->codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(dai, 0, MCLK_AUDIO_RATE, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *dai = rtd->codec_dai;
+	struct snd_soc_codec *codec = rtd->codec;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");
+	if (ret != 0)
+		pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
+	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
+
+	ret = snd_soc_jack_new(codec, "Headset",
+			       SND_JACK_LINEOUT | SND_JACK_HEADSET |
+			       SND_JACK_BTN_0,
+			       &speyside_headset);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&speyside_headset,
+				    ARRAY_SIZE(speyside_headset_pins),
+				    speyside_headset_pins);
+	if (ret)
+		return ret;
+
+	wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
+
+	return 0;
+}
+
+static int speyside_late_probe(struct snd_soc_card *card)
+{
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
+
+	return 0;
+}
+
+static const struct snd_soc_pcm_stream dsp_codec_params = {
+	.formats = SNDRV_PCM_FMTBIT_S32_LE,
+	.rate_min = 48000,
+	.rate_max = 48000,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static struct snd_soc_dai_link speyside_dai[] = {
+	{
+		.name = "CPU-DSP",
+		.stream_name = "CPU-DSP",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm0010-sdi1",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "spi0.0",
+		.init = speyside_wm0010_init,
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+	},
+	{
+		.name = "DSP-CODEC",
+		.stream_name = "DSP-CODEC",
+		.cpu_dai_name = "wm0010-sdi2",
+		.codec_dai_name = "wm8996-aif1",
+		.codec_name = "wm8996.1-001a",
+		.init = speyside_wm8996_init,
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.params = &dsp_codec_params,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "Baseband",
+		.stream_name = "Baseband",
+		.cpu_dai_name = "wm8996-aif2",
+		.codec_dai_name = "wm1250-ev1",
+		.codec_name = "wm1250-ev1.1-0027",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+	},
+};
+
+static int speyside_wm9081_init(struct snd_soc_dapm_context *dapm)
+{
+	/* At any time the WM9081 is active it will have this clock */
+	return snd_soc_codec_set_sysclk(dapm->codec, WM9081_SYSCLK_MCLK, 0,
+					MCLK_AUDIO_RATE, 0);
+}
+
+static struct snd_soc_aux_dev speyside_aux_dev[] = {
+	{
+		.name = "wm9081",
+		.codec_name = "wm9081.1-006c",
+		.init = speyside_wm9081_init,
+	},
+};
+
+static struct snd_soc_codec_conf speyside_codec_conf[] = {
+	{
+		.dev_name = "wm9081.1-006c",
+		.name_prefix = "Sub",
+	},
+};
+
+static const struct snd_kcontrol_new controls[] = {
+	SOC_DAPM_PIN_SWITCH("Main Speaker"),
+	SOC_DAPM_PIN_SWITCH("Main DMIC"),
+	SOC_DAPM_PIN_SWITCH("Main AMIC"),
+	SOC_DAPM_PIN_SWITCH("WM1250 Input"),
+	SOC_DAPM_PIN_SWITCH("WM1250 Output"),
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+	SND_SOC_DAPM_SPK("Main Speaker", NULL),
+
+	SND_SOC_DAPM_MIC("Main AMIC", NULL),
+	SND_SOC_DAPM_MIC("Main DMIC", NULL),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+	{ "IN1RN", NULL, "MICB1" },
+	{ "IN1RP", NULL, "MICB1" },
+	{ "IN1RN", NULL, "MICB2" },
+	{ "IN1RP", NULL, "MICB2" },
+	{ "MICB1", NULL, "Headset Mic", speyside_get_micbias },
+	{ "MICB2", NULL, "Headset Mic", speyside_get_micbias },
+
+	{ "IN1LP", NULL, "MICB2" },
+	{ "IN1RN", NULL, "MICB1" },
+	{ "MICB2", NULL, "Main AMIC" },
+
+	{ "DMIC1DAT", NULL, "MICB1" },
+	{ "DMIC2DAT", NULL, "MICB1" },
+	{ "MICB1", NULL, "Main DMIC" },
+
+	{ "Headphone", NULL, "HPOUT1L" },
+	{ "Headphone", NULL, "HPOUT1R" },
+
+	{ "Sub IN1", NULL, "HPOUT2L" },
+	{ "Sub IN2", NULL, "HPOUT2R" },
+
+	{ "Main Speaker", NULL, "Sub SPKN" },
+	{ "Main Speaker", NULL, "Sub SPKP" },
+	{ "Main Speaker", NULL, "SPKDAT" },
+};
+
+static struct snd_soc_card speyside = {
+	.name = "Speyside",
+	.owner = THIS_MODULE,
+	.dai_link = speyside_dai,
+	.num_links = ARRAY_SIZE(speyside_dai),
+	.aux_dev = speyside_aux_dev,
+	.num_aux_devs = ARRAY_SIZE(speyside_aux_dev),
+	.codec_conf = speyside_codec_conf,
+	.num_configs = ARRAY_SIZE(speyside_codec_conf),
+
+	.set_bias_level = speyside_set_bias_level,
+	.set_bias_level_post = speyside_set_bias_level_post,
+
+	.controls = controls,
+	.num_controls = ARRAY_SIZE(controls),
+	.dapm_widgets = widgets,
+	.num_dapm_widgets = ARRAY_SIZE(widgets),
+	.dapm_routes = audio_paths,
+	.num_dapm_routes = ARRAY_SIZE(audio_paths),
+	.fully_routed = true,
+
+	.late_probe = speyside_late_probe,
+};
+
+static int speyside_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &speyside;
+	int ret;
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int speyside_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+static struct platform_driver speyside_driver = {
+	.driver = {
+		.name = "speyside",
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = speyside_probe,
+	.remove = speyside_remove,
+};
+
+module_platform_driver(speyside_driver);
+
+MODULE_DESCRIPTION("Speyside audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:speyside");

sound/soc/samsung/tobermory.c

@@ -0,0 +1,258 @@
+/*
+ * Tobermory audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include "../codecs/wm8962.h"
+
+static int sample_rate = 44100;
+
+static int tobermory_set_bias_level(struct snd_soc_card *card,
+					  struct snd_soc_dapm_context *dapm,
+					  enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_PREPARE:
+		if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
+			ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+						  WM8962_FLL_MCLK, 32768,
+						  sample_rate * 512);
+			if (ret < 0)
+				pr_err("Failed to start FLL: %d\n", ret);
+
+			ret = snd_soc_dai_set_sysclk(codec_dai,
+						     WM8962_SYSCLK_FLL,
+						     sample_rate * 512,
+						     SND_SOC_CLOCK_IN);
+			if (ret < 0) {
+				pr_err("Failed to set SYSCLK: %d\n", ret);
+				return ret;
+			}
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int tobermory_set_bias_level_post(struct snd_soc_card *card,
+					       struct snd_soc_dapm_context *dapm,
+					       enum snd_soc_bias_level level)
+{
+	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+	int ret;
+
+	if (dapm->dev != codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+					     32768, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			pr_err("Failed to switch away from FLL: %d\n", ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+					  0, 0, 0);
+		if (ret < 0) {
+			pr_err("Failed to stop FLL: %d\n", ret);
+			return ret;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	dapm->bias_level = level;
+
+	return 0;
+}
+
+static int tobermory_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	sample_rate = params_rate(params);
+
+	return 0;
+}
+
+static struct snd_soc_ops tobermory_ops = {
+	.hw_params = tobermory_hw_params,
+};
+
+static struct snd_soc_dai_link tobermory_dai[] = {
+	{
+		.name = "CPU",
+		.stream_name = "CPU",
+		.cpu_dai_name = "samsung-i2s.0",
+		.codec_dai_name = "wm8962",
+		.platform_name = "samsung-i2s.0",
+		.codec_name = "wm8962.1-001a",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+				| SND_SOC_DAIFMT_CBM_CFM,
+		.ops = &tobermory_ops,
+	},
+};
+
+static const struct snd_kcontrol_new controls[] = {
+	SOC_DAPM_PIN_SWITCH("Main Speaker"),
+	SOC_DAPM_PIN_SWITCH("DMIC"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+	SND_SOC_DAPM_MIC("DMIC", NULL),
+	SND_SOC_DAPM_MIC("AMIC", NULL),
+
+	SND_SOC_DAPM_SPK("Main Speaker", NULL),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+	{ "Headphone", NULL, "HPOUTL" },
+	{ "Headphone", NULL, "HPOUTR" },
+
+	{ "Main Speaker", NULL, "SPKOUTL" },
+	{ "Main Speaker", NULL, "SPKOUTR" },
+
+	{ "Headset Mic", NULL, "MICBIAS" },
+	{ "IN4L", NULL, "Headset Mic" },
+	{ "IN4R", NULL, "Headset Mic" },
+
+	{ "AMIC", NULL, "MICBIAS" },
+	{ "IN1L", NULL, "AMIC" },
+	{ "IN1R", NULL, "AMIC" },
+
+	{ "DMIC", NULL, "MICBIAS" },
+	{ "DMICDAT", NULL, "DMIC" },
+};
+
+static struct snd_soc_jack tobermory_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin tobermory_headset_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
+
+static int tobermory_late_probe(struct snd_soc_card *card)
+{
+	struct snd_soc_codec *codec = card->rtd[0].codec;
+	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+				     32768, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_jack_new(codec, "Headset",
+			       SND_JACK_HEADSET | SND_JACK_BTN_0,
+			       &tobermory_headset);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&tobermory_headset,
+				    ARRAY_SIZE(tobermory_headset_pins),
+				    tobermory_headset_pins);
+	if (ret)
+		return ret;
+
+	wm8962_mic_detect(codec, &tobermory_headset);
+
+	return 0;
+}
+
+static struct snd_soc_card tobermory = {
+	.name = "Tobermory",
+	.owner = THIS_MODULE,
+	.dai_link = tobermory_dai,
+	.num_links = ARRAY_SIZE(tobermory_dai),
+
+	.set_bias_level = tobermory_set_bias_level,
+	.set_bias_level_post = tobermory_set_bias_level_post,
+
+	.controls = controls,
+	.num_controls = ARRAY_SIZE(controls),
+	.dapm_widgets = widgets,
+	.num_dapm_widgets = ARRAY_SIZE(widgets),
+	.dapm_routes = audio_paths,
+	.num_dapm_routes = ARRAY_SIZE(audio_paths),
+	.fully_routed = true,
+
+	.late_probe = tobermory_late_probe,
+};
+
+static int tobermory_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &tobermory;
+	int ret;
+
+	card->dev = &pdev->dev;
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tobermory_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+
+	return 0;
+}
+
+static struct platform_driver tobermory_driver = {
+	.driver = {
+		.name = "tobermory",
+		.owner = THIS_MODULE,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = tobermory_probe,
+	.remove = tobermory_remove,
+};
+
+module_platform_driver(tobermory_driver);
+
+MODULE_DESCRIPTION("Tobermory audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tobermory");