Initial commit; kernel source import

drivers/w1/masters/Kconfig

@@ -0,0 +1,69 @@
+#
+# 1-wire bus master configuration
+#
+
+menu "1-wire Bus Masters"
+
+config W1_MASTER_MATROX
+	tristate "Matrox G400 transport layer for 1-wire"
+	depends on PCI
+	help
+	  Say Y here if you want to communicate with your 1-wire devices
+	  using Matrox's G400 GPIO pins.
+
+	  This support is also available as a module.  If so, the module
+	  will be called matrox_w1.
+
+config W1_MASTER_DS2490
+	tristate "DS2490 USB <-> W1 transport layer for 1-wire"
+  	depends on USB
+  	help
+	  Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
+	  for example DS9490*.
+
+  	  This support is also available as a module.  If so, the module
+	  will be called ds2490.
+
+config W1_MASTER_DS2482
+	tristate "Maxim DS2482 I2C to 1-Wire bridge"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Maxim DS2482
+	  I2C to 1-Wire bridge.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds2482.
+
+config W1_MASTER_MXC
+	tristate "Freescale MXC 1-wire busmaster"
+	depends on W1 && ARCH_MXC
+	help
+	  Say Y here to enable MXC 1-wire host
+
+config W1_MASTER_DS1WM
+	tristate "Maxim DS1WM 1-wire busmaster"
+	depends on W1 && GENERIC_HARDIRQS
+	help
+	  Say Y here to enable the DS1WM 1-wire driver, such as that
+	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
+	  hx4700.
+
+config W1_MASTER_GPIO
+	tristate "GPIO 1-wire busmaster"
+	depends on GPIOLIB
+	help
+	  Say Y here if you want to communicate with your 1-wire devices using
+	  GPIO pins. This driver uses the GPIO API to control the wire.
+
+	  This support is also available as a module.  If so, the module
+	  will be called w1-gpio.
+
+config HDQ_MASTER_OMAP
+	tristate "OMAP HDQ driver"
+	depends on ARCH_OMAP
+	help
+	  Say Y here if you want support for the 1-wire or HDQ Interface
+	  on an OMAP processor.
+
+endmenu
+

drivers/w1/masters/Makefile

@@ -0,0 +1,12 @@
+#
+# Makefile for 1-wire bus master drivers.
+#
+
+obj-$(CONFIG_W1_MASTER_MATROX)		+= matrox_w1.o
+obj-$(CONFIG_W1_MASTER_DS2490)		+= ds2490.o
+obj-$(CONFIG_W1_MASTER_DS2482)		+= ds2482.o
+obj-$(CONFIG_W1_MASTER_MXC)		+= mxc_w1.o
+
+obj-$(CONFIG_W1_MASTER_DS1WM)		+= ds1wm.o
+obj-$(CONFIG_W1_MASTER_GPIO)		+= w1-gpio.o
+obj-$(CONFIG_HDQ_MASTER_OMAP)		+= omap_hdq.o

drivers/w1/masters/ds1wm.c

@@ -0,0 +1,582 @@
+/*
+ * 1-wire busmaster driver for DS1WM and ASICs with embedded DS1WMs
+ * such as HP iPAQs (including h5xxx, h2200, and devices with ASIC3
+ * like hx4700).
+ *
+ * Copyright (c) 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * Copyright (c) 2004-2007, Matt Reimer <mreimer@vpop.net>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ds1wm.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+
+#define DS1WM_CMD	0x00	/* R/W 4 bits command */
+#define DS1WM_DATA	0x01	/* R/W 8 bits, transmit/receive buffer */
+#define DS1WM_INT	0x02	/* R/W interrupt status */
+#define DS1WM_INT_EN	0x03	/* R/W interrupt enable */
+#define DS1WM_CLKDIV	0x04	/* R/W 5 bits of divisor and pre-scale */
+#define DS1WM_CNTRL	0x05	/* R/W master control register (not used yet) */
+
+#define DS1WM_CMD_1W_RESET  (1 << 0)	/* force reset on 1-wire bus */
+#define DS1WM_CMD_SRA	    (1 << 1)	/* enable Search ROM accelerator mode */
+#define DS1WM_CMD_DQ_OUTPUT (1 << 2)	/* write only - forces bus low */
+#define DS1WM_CMD_DQ_INPUT  (1 << 3)	/* read only - reflects state of bus */
+#define DS1WM_CMD_RST	    (1 << 5)	/* software reset */
+#define DS1WM_CMD_OD	    (1 << 7)	/* overdrive */
+
+#define DS1WM_INT_PD	    (1 << 0)	/* presence detect */
+#define DS1WM_INT_PDR	    (1 << 1)	/* presence detect result */
+#define DS1WM_INT_TBE	    (1 << 2)	/* tx buffer empty */
+#define DS1WM_INT_TSRE	    (1 << 3)	/* tx shift register empty */
+#define DS1WM_INT_RBF	    (1 << 4)	/* rx buffer full */
+#define DS1WM_INT_RSRF	    (1 << 5)	/* rx shift register full */
+
+#define DS1WM_INTEN_EPD	    (1 << 0)	/* enable presence detect int */
+#define DS1WM_INTEN_IAS	    (1 << 1)	/* INTR active state */
+#define DS1WM_INTEN_ETBE    (1 << 2)	/* enable tx buffer empty int */
+#define DS1WM_INTEN_ETMT    (1 << 3)	/* enable tx shift register empty int */
+#define DS1WM_INTEN_ERBF    (1 << 4)	/* enable rx buffer full int */
+#define DS1WM_INTEN_ERSRF   (1 << 5)	/* enable rx shift register full int */
+#define DS1WM_INTEN_DQO	    (1 << 6)	/* enable direct bus driving ops */
+
+#define DS1WM_INTEN_NOT_IAS (~DS1WM_INTEN_IAS)	/* all but INTR active state */
+
+#define DS1WM_TIMEOUT (HZ * 5)
+
+static struct {
+	unsigned long freq;
+	unsigned long divisor;
+} freq[] = {
+	{   1000000, 0x80 },
+	{   2000000, 0x84 },
+	{   3000000, 0x81 },
+	{   4000000, 0x88 },
+	{   5000000, 0x82 },
+	{   6000000, 0x85 },
+	{   7000000, 0x83 },
+	{   8000000, 0x8c },
+	{  10000000, 0x86 },
+	{  12000000, 0x89 },
+	{  14000000, 0x87 },
+	{  16000000, 0x90 },
+	{  20000000, 0x8a },
+	{  24000000, 0x8d },
+	{  28000000, 0x8b },
+	{  32000000, 0x94 },
+	{  40000000, 0x8e },
+	{  48000000, 0x91 },
+	{  56000000, 0x8f },
+	{  64000000, 0x98 },
+	{  80000000, 0x92 },
+	{  96000000, 0x95 },
+	{ 112000000, 0x93 },
+	{ 128000000, 0x9c },
+/* you can continue this table, consult the OPERATION - CLOCK DIVISOR
+   section of the ds1wm spec sheet. */
+};
+
+struct ds1wm_data {
+	void     __iomem *map;
+	int      bus_shift; /* # of shifts to calc register offsets */
+	struct platform_device *pdev;
+	const struct mfd_cell   *cell;
+	int      irq;
+	int      slave_present;
+	void     *reset_complete;
+	void     *read_complete;
+	void     *write_complete;
+	int      read_error;
+	/* last byte received */
+	u8       read_byte;
+	/* byte to write that makes all intr disabled, */
+	/* considering active_state (IAS) (optimization) */
+	u8       int_en_reg_none;
+	unsigned int reset_recover_delay; /* see ds1wm.h */
+};
+
+static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg,
+					u8 val)
+{
+	__raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+}
+
+static inline u8 ds1wm_read_register(struct ds1wm_data *ds1wm_data, u32 reg)
+{
+	return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+}
+
+
+static irqreturn_t ds1wm_isr(int isr, void *data)
+{
+	struct ds1wm_data *ds1wm_data = data;
+	u8 intr;
+	u8 inten = ds1wm_read_register(ds1wm_data, DS1WM_INT_EN);
+	/* if no bits are set in int enable register (except the IAS)
+	than go no further, reading the regs below has side effects */
+	if (!(inten & DS1WM_INTEN_NOT_IAS))
+		return IRQ_NONE;
+
+	ds1wm_write_register(ds1wm_data,
+		DS1WM_INT_EN, ds1wm_data->int_en_reg_none);
+
+	/* this read action clears the INTR and certain flags in ds1wm */
+	intr = ds1wm_read_register(ds1wm_data, DS1WM_INT);
+
+	ds1wm_data->slave_present = (intr & DS1WM_INT_PDR) ? 0 : 1;
+
+	if ((intr & DS1WM_INT_TSRE) && ds1wm_data->write_complete) {
+		inten &= ~DS1WM_INTEN_ETMT;
+		complete(ds1wm_data->write_complete);
+	}
+	if (intr & DS1WM_INT_RBF) {
+		/* this read clears the RBF flag */
+		ds1wm_data->read_byte = ds1wm_read_register(ds1wm_data,
+		DS1WM_DATA);
+		inten &= ~DS1WM_INTEN_ERBF;
+		if (ds1wm_data->read_complete)
+			complete(ds1wm_data->read_complete);
+	}
+	if ((intr & DS1WM_INT_PD) && ds1wm_data->reset_complete) {
+		inten &= ~DS1WM_INTEN_EPD;
+		complete(ds1wm_data->reset_complete);
+	}
+
+	ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, inten);
+	return IRQ_HANDLED;
+}
+
+static int ds1wm_reset(struct ds1wm_data *ds1wm_data)
+{
+	unsigned long timeleft;
+	DECLARE_COMPLETION_ONSTACK(reset_done);
+
+	ds1wm_data->reset_complete = &reset_done;
+
+	/* enable Presence detect only */
+	ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, DS1WM_INTEN_EPD |
+	ds1wm_data->int_en_reg_none);
+
+	ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_1W_RESET);
+
+	timeleft = wait_for_completion_timeout(&reset_done, DS1WM_TIMEOUT);
+	ds1wm_data->reset_complete = NULL;
+	if (!timeleft) {
+		dev_err(&ds1wm_data->pdev->dev, "reset failed, timed out\n");
+		return 1;
+	}
+
+	if (!ds1wm_data->slave_present) {
+		dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n");
+		return 1;
+	}
+
+	if (ds1wm_data->reset_recover_delay)
+		msleep(ds1wm_data->reset_recover_delay);
+
+	return 0;
+}
+
+static int ds1wm_write(struct ds1wm_data *ds1wm_data, u8 data)
+{
+	unsigned long timeleft;
+	DECLARE_COMPLETION_ONSTACK(write_done);
+	ds1wm_data->write_complete = &write_done;
+
+	ds1wm_write_register(ds1wm_data, DS1WM_INT_EN,
+	ds1wm_data->int_en_reg_none | DS1WM_INTEN_ETMT);
+
+	ds1wm_write_register(ds1wm_data, DS1WM_DATA, data);
+
+	timeleft = wait_for_completion_timeout(&write_done, DS1WM_TIMEOUT);
+
+	ds1wm_data->write_complete = NULL;
+	if (!timeleft) {
+		dev_err(&ds1wm_data->pdev->dev, "write failed, timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static u8 ds1wm_read(struct ds1wm_data *ds1wm_data, unsigned char write_data)
+{
+	unsigned long timeleft;
+	u8 intEnable = DS1WM_INTEN_ERBF | ds1wm_data->int_en_reg_none;
+	DECLARE_COMPLETION_ONSTACK(read_done);
+
+	ds1wm_read_register(ds1wm_data, DS1WM_DATA);
+
+	ds1wm_data->read_complete = &read_done;
+	ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, intEnable);
+
+	ds1wm_write_register(ds1wm_data, DS1WM_DATA, write_data);
+	timeleft = wait_for_completion_timeout(&read_done, DS1WM_TIMEOUT);
+
+	ds1wm_data->read_complete = NULL;
+	if (!timeleft) {
+		dev_err(&ds1wm_data->pdev->dev, "read failed, timed out\n");
+		ds1wm_data->read_error = -ETIMEDOUT;
+		return 0xFF;
+	}
+	ds1wm_data->read_error = 0;
+	return ds1wm_data->read_byte;
+}
+
+static int ds1wm_find_divisor(int gclk)
+{
+	int i;
+
+	for (i = ARRAY_SIZE(freq)-1; i >= 0; --i)
+		if (gclk >= freq[i].freq)
+			return freq[i].divisor;
+
+	return 0;
+}
+
+static void ds1wm_up(struct ds1wm_data *ds1wm_data)
+{
+	int divisor;
+	struct ds1wm_driver_data *plat = ds1wm_data->pdev->dev.platform_data;
+
+	if (ds1wm_data->cell->enable)
+		ds1wm_data->cell->enable(ds1wm_data->pdev);
+
+	divisor = ds1wm_find_divisor(plat->clock_rate);
+	dev_dbg(&ds1wm_data->pdev->dev,
+		"found divisor 0x%x for clock %d\n", divisor, plat->clock_rate);
+	if (divisor == 0) {
+		dev_err(&ds1wm_data->pdev->dev,
+			"no suitable divisor for %dHz clock\n",
+			plat->clock_rate);
+		return;
+	}
+	ds1wm_write_register(ds1wm_data, DS1WM_CLKDIV, divisor);
+
+	/* Let the w1 clock stabilize. */
+	msleep(1);
+
+	ds1wm_reset(ds1wm_data);
+}
+
+static void ds1wm_down(struct ds1wm_data *ds1wm_data)
+{
+	ds1wm_reset(ds1wm_data);
+
+	/* Disable interrupts. */
+	ds1wm_write_register(ds1wm_data, DS1WM_INT_EN,
+		ds1wm_data->int_en_reg_none);
+
+	if (ds1wm_data->cell->disable)
+		ds1wm_data->cell->disable(ds1wm_data->pdev);
+}
+
+/* --------------------------------------------------------------------- */
+/* w1 methods */
+
+static u8 ds1wm_read_byte(void *data)
+{
+	struct ds1wm_data *ds1wm_data = data;
+
+	return ds1wm_read(ds1wm_data, 0xff);
+}
+
+static void ds1wm_write_byte(void *data, u8 byte)
+{
+	struct ds1wm_data *ds1wm_data = data;
+
+	ds1wm_write(ds1wm_data, byte);
+}
+
+static u8 ds1wm_reset_bus(void *data)
+{
+	struct ds1wm_data *ds1wm_data = data;
+
+	ds1wm_reset(ds1wm_data);
+
+	return 0;
+}
+
+static void ds1wm_search(void *data, struct w1_master *master_dev,
+			u8 search_type, w1_slave_found_callback slave_found)
+{
+	struct ds1wm_data *ds1wm_data = data;
+	int i;
+	int ms_discrep_bit = -1;
+	u64 r = 0; /* holds the progress of the search */
+	u64 r_prime, d;
+	unsigned slaves_found = 0;
+	unsigned int pass = 0;
+
+	dev_dbg(&ds1wm_data->pdev->dev, "search begin\n");
+	while (true) {
+		++pass;
+		if (pass > 100) {
+			dev_dbg(&ds1wm_data->pdev->dev,
+				"too many attempts (100), search aborted\n");
+			return;
+		}
+
+		mutex_lock(&master_dev->bus_mutex);
+		if (ds1wm_reset(ds1wm_data)) {
+			mutex_unlock(&master_dev->bus_mutex);
+			dev_dbg(&ds1wm_data->pdev->dev,
+				"pass: %d reset error (or no slaves)\n", pass);
+			break;
+		}
+
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d r : %0#18llx writing SEARCH_ROM\n", pass, r);
+		ds1wm_write(ds1wm_data, search_type);
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d entering ASM\n", pass);
+		ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_SRA);
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d beginning nibble loop\n", pass);
+
+		r_prime = 0;
+		d = 0;
+		/* we work one nibble at a time */
+		/* each nibble is interleaved to form a byte */
+		for (i = 0; i < 16; i++) {
+
+			unsigned char resp, _r, _r_prime, _d;
+
+			_r = (r >> (4*i)) & 0xf;
+			_r = ((_r & 0x1) << 1) |
+			((_r & 0x2) << 2) |
+			((_r & 0x4) << 3) |
+			((_r & 0x8) << 4);
+
+			/* writes _r, then reads back: */
+			resp = ds1wm_read(ds1wm_data, _r);
+
+			if (ds1wm_data->read_error) {
+				dev_err(&ds1wm_data->pdev->dev,
+				"pass: %d nibble: %d read error\n", pass, i);
+				break;
+			}
+
+			_r_prime = ((resp & 0x02) >> 1) |
+			((resp & 0x08) >> 2) |
+			((resp & 0x20) >> 3) |
+			((resp & 0x80) >> 4);
+
+			_d = ((resp & 0x01) >> 0) |
+			((resp & 0x04) >> 1) |
+			((resp & 0x10) >> 2) |
+			((resp & 0x40) >> 3);
+
+			r_prime |= (unsigned long long) _r_prime << (i * 4);
+			d |= (unsigned long long) _d << (i * 4);
+
+		}
+		if (ds1wm_data->read_error) {
+			mutex_unlock(&master_dev->bus_mutex);
+			dev_err(&ds1wm_data->pdev->dev,
+				"pass: %d read error, retrying\n", pass);
+			break;
+		}
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d r\': %0#18llx d:%0#18llx\n",
+			pass, r_prime, d);
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d nibble loop complete, exiting ASM\n", pass);
+		ds1wm_write_register(ds1wm_data, DS1WM_CMD, ~DS1WM_CMD_SRA);
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d resetting bus\n", pass);
+		ds1wm_reset(ds1wm_data);
+		mutex_unlock(&master_dev->bus_mutex);
+		if ((r_prime & ((u64)1 << 63)) && (d & ((u64)1 << 63))) {
+			dev_err(&ds1wm_data->pdev->dev,
+				"pass: %d bus error, retrying\n", pass);
+			continue; /* start over */
+		}
+
+
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d found %0#18llx\n", pass, r_prime);
+		slave_found(master_dev, r_prime);
+		++slaves_found;
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d complete, preparing next pass\n", pass);
+
+		/* any discrepency found which we already choose the
+		   '1' branch is now is now irrelevant we reveal the
+		   next branch with this: */
+		d &= ~r;
+		/* find last bit set, i.e. the most signif. bit set */
+		ms_discrep_bit = fls64(d) - 1;
+		dev_dbg(&ds1wm_data->pdev->dev,
+			"pass: %d new d:%0#18llx MS discrep bit:%d\n",
+			pass, d, ms_discrep_bit);
+
+		/* prev_ms_discrep_bit = ms_discrep_bit;
+		   prepare for next ROM search:		    */
+		if (ms_discrep_bit == -1)
+			break;
+
+		r = (r &  ~(~0ull << (ms_discrep_bit))) | 1 << ms_discrep_bit;
+	} /* end while true */
+	dev_dbg(&ds1wm_data->pdev->dev,
+		"pass: %d total: %d search done ms d bit pos: %d\n", pass,
+		slaves_found, ms_discrep_bit);
+}
+
+/* --------------------------------------------------------------------- */
+
+static struct w1_bus_master ds1wm_master = {
+	.read_byte  = ds1wm_read_byte,
+	.write_byte = ds1wm_write_byte,
+	.reset_bus  = ds1wm_reset_bus,
+	.search	    = ds1wm_search,
+};
+
+static int ds1wm_probe(struct platform_device *pdev)
+{
+	struct ds1wm_data *ds1wm_data;
+	struct ds1wm_driver_data *plat;
+	struct resource *res;
+	int ret;
+
+	if (!pdev)
+		return -ENODEV;
+
+	ds1wm_data = devm_kzalloc(&pdev->dev, sizeof(*ds1wm_data), GFP_KERNEL);
+	if (!ds1wm_data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ds1wm_data);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+	ds1wm_data->map = devm_ioremap(&pdev->dev, res->start,
+				       resource_size(res));
+	if (!ds1wm_data->map)
+		return -ENOMEM;
+
+	/* calculate bus shift from mem resource */
+	ds1wm_data->bus_shift = resource_size(res) >> 3;
+
+	ds1wm_data->pdev = pdev;
+	ds1wm_data->cell = mfd_get_cell(pdev);
+	if (!ds1wm_data->cell)
+		return -ENODEV;
+	plat = pdev->dev.platform_data;
+	if (!plat)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res)
+		return -ENXIO;
+	ds1wm_data->irq = res->start;
+	ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0);
+	ds1wm_data->reset_recover_delay = plat->reset_recover_delay;
+
+	if (res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_RISING);
+	if (res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_FALLING);
+
+	ret = devm_request_irq(&pdev->dev, ds1wm_data->irq, ds1wm_isr,
+			IRQF_DISABLED | IRQF_SHARED, "ds1wm", ds1wm_data);
+	if (ret)
+		return ret;
+
+	ds1wm_up(ds1wm_data);
+
+	ds1wm_master.data = (void *)ds1wm_data;
+
+	ret = w1_add_master_device(&ds1wm_master);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	ds1wm_down(ds1wm_data);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int ds1wm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev);
+
+	ds1wm_down(ds1wm_data);
+
+	return 0;
+}
+
+static int ds1wm_resume(struct platform_device *pdev)
+{
+	struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev);
+
+	ds1wm_up(ds1wm_data);
+
+	return 0;
+}
+#else
+#define ds1wm_suspend NULL
+#define ds1wm_resume NULL
+#endif
+
+static int ds1wm_remove(struct platform_device *pdev)
+{
+	struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev);
+
+	w1_remove_master_device(&ds1wm_master);
+	ds1wm_down(ds1wm_data);
+
+	return 0;
+}
+
+static struct platform_driver ds1wm_driver = {
+	.driver   = {
+		.name = "ds1wm",
+	},
+	.probe    = ds1wm_probe,
+	.remove   = ds1wm_remove,
+	.suspend  = ds1wm_suspend,
+	.resume   = ds1wm_resume
+};
+
+static int __init ds1wm_init(void)
+{
+	printk("DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko\n");
+	return platform_driver_register(&ds1wm_driver);
+}
+
+static void __exit ds1wm_exit(void)
+{
+	platform_driver_unregister(&ds1wm_driver);
+}
+
+module_init(ds1wm_init);
+module_exit(ds1wm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
+	"Matt Reimer <mreimer@vpop.net>,"
+	"Jean-Francois Dagenais <dagenaisj@sonatest.com>");
+MODULE_DESCRIPTION("DS1WM w1 busmaster driver");

drivers/w1/masters/ds2482.c

@@ -0,0 +1,551 @@
+/**
+ * ds2482.c - provides i2c to w1-master bridge(s)
+ * Copyright (C) 2005  Ben Gardner <bgardner@wabtec.com>
+ *
+ * The DS2482 is a sensor chip made by Dallas Semiconductor (Maxim).
+ * It is a I2C to 1-wire bridge.
+ * There are two variations: -100 and -800, which have 1 or 8 1-wire ports.
+ * The complete datasheet can be obtained from MAXIM's website at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4382
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+/**
+ * The DS2482 registers - there are 3 registers that are addressed by a read
+ * pointer. The read pointer is set by the last command executed.
+ *
+ * To read the data, issue a register read for any address
+ */
+#define DS2482_CMD_RESET		0xF0	/* No param */
+#define DS2482_CMD_SET_READ_PTR		0xE1	/* Param: DS2482_PTR_CODE_xxx */
+#define DS2482_CMD_CHANNEL_SELECT	0xC3	/* Param: Channel byte - DS2482-800 only */
+#define DS2482_CMD_WRITE_CONFIG		0xD2	/* Param: Config byte */
+#define DS2482_CMD_1WIRE_RESET		0xB4	/* Param: None */
+#define DS2482_CMD_1WIRE_SINGLE_BIT	0x87	/* Param: Bit byte (bit7) */
+#define DS2482_CMD_1WIRE_WRITE_BYTE	0xA5	/* Param: Data byte */
+#define DS2482_CMD_1WIRE_READ_BYTE	0x96	/* Param: None */
+/* Note to read the byte, Set the ReadPtr to Data then read (any addr) */
+#define DS2482_CMD_1WIRE_TRIPLET	0x78	/* Param: Dir byte (bit7) */
+
+/* Values for DS2482_CMD_SET_READ_PTR */
+#define DS2482_PTR_CODE_STATUS		0xF0
+#define DS2482_PTR_CODE_DATA		0xE1
+#define DS2482_PTR_CODE_CHANNEL		0xD2	/* DS2482-800 only */
+#define DS2482_PTR_CODE_CONFIG		0xC3
+
+/**
+ * Configure Register bit definitions
+ * The top 4 bits always read 0.
+ * To write, the top nibble must be the 1's compl. of the low nibble.
+ */
+#define DS2482_REG_CFG_1WS		0x08	/* 1-wire speed */
+#define DS2482_REG_CFG_SPU		0x04	/* strong pull-up */
+#define DS2482_REG_CFG_PPM		0x02	/* presence pulse masking */
+#define DS2482_REG_CFG_APU		0x01	/* active pull-up */
+
+
+/**
+ * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
+ * To set the channel, write the value at the index of the channel.
+ * Read and compare against the corresponding value to verify the change.
+ */
+static const u8 ds2482_chan_wr[8] =
+	{ 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
+static const u8 ds2482_chan_rd[8] =
+	{ 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
+
+
+/**
+ * Status Register bit definitions (read only)
+ */
+#define DS2482_REG_STS_DIR		0x80
+#define DS2482_REG_STS_TSB		0x40
+#define DS2482_REG_STS_SBR		0x20
+#define DS2482_REG_STS_RST		0x10
+#define DS2482_REG_STS_LL		0x08
+#define DS2482_REG_STS_SD		0x04
+#define DS2482_REG_STS_PPD		0x02
+#define DS2482_REG_STS_1WB		0x01
+
+
+static int ds2482_probe(struct i2c_client *client,
+			const struct i2c_device_id *id);
+static int ds2482_remove(struct i2c_client *client);
+
+
+/**
+ * Driver data (common to all clients)
+ */
+static const struct i2c_device_id ds2482_id[] = {
+	{ "ds2482", 0 },
+	{ }
+};
+
+static struct i2c_driver ds2482_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "ds2482",
+	},
+	.probe		= ds2482_probe,
+	.remove		= ds2482_remove,
+	.id_table	= ds2482_id,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct ds2482_data;
+
+struct ds2482_w1_chan {
+	struct ds2482_data	*pdev;
+	u8			channel;
+	struct w1_bus_master	w1_bm;
+};
+
+struct ds2482_data {
+	struct i2c_client	*client;
+	struct mutex		access_lock;
+
+	/* 1-wire interface(s) */
+	int			w1_count;	/* 1 or 8 */
+	struct ds2482_w1_chan	w1_ch[8];
+
+	/* per-device values */
+	u8			channel;
+	u8			read_prt;	/* see DS2482_PTR_CODE_xxx */
+	u8			reg_config;
+};
+
+
+/**
+ * Helper to calculate values for configuration register
+ * @param conf the raw config value
+ * @return the value w/ complements that can be written to register
+ */
+static inline u8 ds2482_calculate_config(u8 conf)
+{
+	return conf | ((~conf & 0x0f) << 4);
+}
+
+
+/**
+ * Sets the read pointer.
+ * @param pdev		The ds2482 client pointer
+ * @param read_ptr	see DS2482_PTR_CODE_xxx above
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
+{
+	if (pdev->read_prt != read_ptr) {
+		if (i2c_smbus_write_byte_data(pdev->client,
+					      DS2482_CMD_SET_READ_PTR,
+					      read_ptr) < 0)
+			return -1;
+
+		pdev->read_prt = read_ptr;
+	}
+	return 0;
+}
+
+/**
+ * Sends a command without a parameter
+ * @param pdev	The ds2482 client pointer
+ * @param cmd	DS2482_CMD_RESET,
+ *		DS2482_CMD_1WIRE_RESET,
+ *		DS2482_CMD_1WIRE_READ_BYTE
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
+{
+	if (i2c_smbus_write_byte(pdev->client, cmd) < 0)
+		return -1;
+
+	pdev->read_prt = DS2482_PTR_CODE_STATUS;
+	return 0;
+}
+
+/**
+ * Sends a command with a parameter
+ * @param pdev	The ds2482 client pointer
+ * @param cmd	DS2482_CMD_WRITE_CONFIG,
+ *		DS2482_CMD_1WIRE_SINGLE_BIT,
+ *		DS2482_CMD_1WIRE_WRITE_BYTE,
+ *		DS2482_CMD_1WIRE_TRIPLET
+ * @param byte	The data to send
+ * @return -1 on failure, 0 on success
+ */
+static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
+				       u8 cmd, u8 byte)
+{
+	if (i2c_smbus_write_byte_data(pdev->client, cmd, byte) < 0)
+		return -1;
+
+	/* all cmds leave in STATUS, except CONFIG */
+	pdev->read_prt = (cmd != DS2482_CMD_WRITE_CONFIG) ?
+			 DS2482_PTR_CODE_STATUS : DS2482_PTR_CODE_CONFIG;
+	return 0;
+}
+
+
+/*
+ * 1-Wire interface code
+ */
+
+#define DS2482_WAIT_IDLE_TIMEOUT	100
+
+/**
+ * Waits until the 1-wire interface is idle (not busy)
+ *
+ * @param pdev Pointer to the device structure
+ * @return the last value read from status or -1 (failure)
+ */
+static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
+{
+	int temp = -1;
+	int retries = 0;
+
+	if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) {
+		do {
+			temp = i2c_smbus_read_byte(pdev->client);
+		} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
+			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
+	}
+
+	if (retries >= DS2482_WAIT_IDLE_TIMEOUT)
+		printk(KERN_ERR "%s: timeout on channel %d\n",
+		       __func__, pdev->channel);
+
+	return temp;
+}
+
+/**
+ * Selects a w1 channel.
+ * The 1-wire interface must be idle before calling this function.
+ *
+ * @param pdev		The ds2482 client pointer
+ * @param channel	0-7
+ * @return		-1 (failure) or 0 (success)
+ */
+static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
+{
+	if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_CHANNEL_SELECT,
+				      ds2482_chan_wr[channel]) < 0)
+		return -1;
+
+	pdev->read_prt = DS2482_PTR_CODE_CHANNEL;
+	pdev->channel = -1;
+	if (i2c_smbus_read_byte(pdev->client) == ds2482_chan_rd[channel]) {
+		pdev->channel = channel;
+		return 0;
+	}
+	return -1;
+}
+
+
+/**
+ * Performs the touch-bit function, which writes a 0 or 1 and reads the level.
+ *
+ * @param data	The ds2482 channel pointer
+ * @param bit	The level to write: 0 or non-zero
+ * @return	The level read: 0 or 1
+ */
+static u8 ds2482_w1_touch_bit(void *data, u8 bit)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+	int status = -1;
+
+	mutex_lock(&pdev->access_lock);
+
+	/* Select the channel */
+	ds2482_wait_1wire_idle(pdev);
+	if (pdev->w1_count > 1)
+		ds2482_set_channel(pdev, pchan->channel);
+
+	/* Send the touch command, wait until 1WB == 0, return the status */
+	if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_SINGLE_BIT,
+				  bit ? 0xFF : 0))
+		status = ds2482_wait_1wire_idle(pdev);
+
+	mutex_unlock(&pdev->access_lock);
+
+	return (status & DS2482_REG_STS_SBR) ? 1 : 0;
+}
+
+/**
+ * Performs the triplet function, which reads two bits and writes a bit.
+ * The bit written is determined by the two reads:
+ *   00 => dbit, 01 => 0, 10 => 1
+ *
+ * @param data	The ds2482 channel pointer
+ * @param dbit	The direction to choose if both branches are valid
+ * @return	b0=read1 b1=read2 b3=bit written
+ */
+static u8 ds2482_w1_triplet(void *data, u8 dbit)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+	int status = (3 << 5);
+
+	mutex_lock(&pdev->access_lock);
+
+	/* Select the channel */
+	ds2482_wait_1wire_idle(pdev);
+	if (pdev->w1_count > 1)
+		ds2482_set_channel(pdev, pchan->channel);
+
+	/* Send the triplet command, wait until 1WB == 0, return the status */
+	if (!ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_TRIPLET,
+				  dbit ? 0xFF : 0))
+		status = ds2482_wait_1wire_idle(pdev);
+
+	mutex_unlock(&pdev->access_lock);
+
+	/* Decode the status */
+	return (status >> 5);
+}
+
+/**
+ * Performs the write byte function.
+ *
+ * @param data	The ds2482 channel pointer
+ * @param byte	The value to write
+ */
+static void ds2482_w1_write_byte(void *data, u8 byte)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+
+	mutex_lock(&pdev->access_lock);
+
+	/* Select the channel */
+	ds2482_wait_1wire_idle(pdev);
+	if (pdev->w1_count > 1)
+		ds2482_set_channel(pdev, pchan->channel);
+
+	/* Send the write byte command */
+	ds2482_send_cmd_data(pdev, DS2482_CMD_1WIRE_WRITE_BYTE, byte);
+
+	mutex_unlock(&pdev->access_lock);
+}
+
+/**
+ * Performs the read byte function.
+ *
+ * @param data	The ds2482 channel pointer
+ * @return	The value read
+ */
+static u8 ds2482_w1_read_byte(void *data)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+	int result;
+
+	mutex_lock(&pdev->access_lock);
+
+	/* Select the channel */
+	ds2482_wait_1wire_idle(pdev);
+	if (pdev->w1_count > 1)
+		ds2482_set_channel(pdev, pchan->channel);
+
+	/* Send the read byte command */
+	ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_READ_BYTE);
+
+	/* Wait until 1WB == 0 */
+	ds2482_wait_1wire_idle(pdev);
+
+	/* Select the data register */
+	ds2482_select_register(pdev, DS2482_PTR_CODE_DATA);
+
+	/* Read the data byte */
+	result = i2c_smbus_read_byte(pdev->client);
+
+	mutex_unlock(&pdev->access_lock);
+
+	return result;
+}
+
+
+/**
+ * Sends a reset on the 1-wire interface
+ *
+ * @param data	The ds2482 channel pointer
+ * @return	0=Device present, 1=No device present or error
+ */
+static u8 ds2482_w1_reset_bus(void *data)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+	int err;
+	u8 retval = 1;
+
+	mutex_lock(&pdev->access_lock);
+
+	/* Select the channel */
+	ds2482_wait_1wire_idle(pdev);
+	if (pdev->w1_count > 1)
+		ds2482_set_channel(pdev, pchan->channel);
+
+	/* Send the reset command */
+	err = ds2482_send_cmd(pdev, DS2482_CMD_1WIRE_RESET);
+	if (err >= 0) {
+		/* Wait until the reset is complete */
+		err = ds2482_wait_1wire_idle(pdev);
+		retval = !(err & DS2482_REG_STS_PPD);
+
+		/* If the chip did reset since detect, re-config it */
+		if (err & DS2482_REG_STS_RST)
+			ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
+					     ds2482_calculate_config(0x00));
+	}
+
+	mutex_unlock(&pdev->access_lock);
+
+	return retval;
+}
+
+static u8 ds2482_w1_set_pullup(void *data, int delay)
+{
+	struct ds2482_w1_chan *pchan = data;
+	struct ds2482_data    *pdev = pchan->pdev;
+	u8 retval = 1;
+
+	/* if delay is non-zero activate the pullup,
+	 * the strong pullup will be automatically deactivated
+	 * by the master, so do not explicitly deactive it
+	 */
+	if (delay) {
+		/* both waits are crucial, otherwise devices might not be
+		 * powered long enough, causing e.g. a w1_therm sensor to
+		 * provide wrong conversion results
+		 */
+		ds2482_wait_1wire_idle(pdev);
+		/* note: it seems like both SPU and APU have to be set! */
+		retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
+			ds2482_calculate_config(DS2482_REG_CFG_SPU |
+						DS2482_REG_CFG_APU));
+		ds2482_wait_1wire_idle(pdev);
+	}
+
+	return retval;
+}
+
+
+static int ds2482_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ds2482_data *data;
+	int err = -ENODEV;
+	int temp1;
+	int idx;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
+
+	if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	/* Reset the device (sets the read_ptr to status) */
+	if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
+		dev_warn(&client->dev, "DS2482 reset failed.\n");
+		goto exit_free;
+	}
+
+	/* Sleep at least 525ns to allow the reset to complete */
+	ndelay(525);
+
+	/* Read the status byte - only reset bit and line should be set */
+	temp1 = i2c_smbus_read_byte(client);
+	if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) {
+		dev_warn(&client->dev, "DS2482 reset status "
+			 "0x%02X - not a DS2482\n", temp1);
+		goto exit_free;
+	}
+
+	/* Detect the 8-port version */
+	data->w1_count = 1;
+	if (ds2482_set_channel(data, 7) == 0)
+		data->w1_count = 8;
+
+	/* Set all config items to 0 (off) */
+	ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG,
+		ds2482_calculate_config(0x00));
+
+	mutex_init(&data->access_lock);
+
+	/* Register 1-wire interface(s) */
+	for (idx = 0; idx < data->w1_count; idx++) {
+		data->w1_ch[idx].pdev = data;
+		data->w1_ch[idx].channel = idx;
+
+		/* Populate all the w1 bus master stuff */
+		data->w1_ch[idx].w1_bm.data       = &data->w1_ch[idx];
+		data->w1_ch[idx].w1_bm.read_byte  = ds2482_w1_read_byte;
+		data->w1_ch[idx].w1_bm.write_byte = ds2482_w1_write_byte;
+		data->w1_ch[idx].w1_bm.touch_bit  = ds2482_w1_touch_bit;
+		data->w1_ch[idx].w1_bm.triplet    = ds2482_w1_triplet;
+		data->w1_ch[idx].w1_bm.reset_bus  = ds2482_w1_reset_bus;
+		data->w1_ch[idx].w1_bm.set_pullup = ds2482_w1_set_pullup;
+
+		err = w1_add_master_device(&data->w1_ch[idx].w1_bm);
+		if (err) {
+			data->w1_ch[idx].pdev = NULL;
+			goto exit_w1_remove;
+		}
+	}
+
+	return 0;
+
+exit_w1_remove:
+	for (idx = 0; idx < data->w1_count; idx++) {
+		if (data->w1_ch[idx].pdev != NULL)
+			w1_remove_master_device(&data->w1_ch[idx].w1_bm);
+	}
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int ds2482_remove(struct i2c_client *client)
+{
+	struct ds2482_data   *data = i2c_get_clientdata(client);
+	int idx;
+
+	/* Unregister the 1-wire bridge(s) */
+	for (idx = 0; idx < data->w1_count; idx++) {
+		if (data->w1_ch[idx].pdev != NULL)
+			w1_remove_master_device(&data->w1_ch[idx].w1_bm);
+	}
+
+	/* Free the memory */
+	kfree(data);
+	return 0;
+}
+
+module_i2c_driver(ds2482_driver);
+
+MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
+MODULE_DESCRIPTION("DS2482 driver");
+MODULE_LICENSE("GPL");

drivers/w1/masters/matrox_w1.c

@@ -0,0 +1,247 @@
+/*
+ *	matrox_w1.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/types.h>
+#include <linux/atomic.h>
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/pci.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_log.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
+MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
+
+static struct pci_device_id matrox_w1_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
+
+static int matrox_w1_probe(struct pci_dev *, const struct pci_device_id *);
+static void matrox_w1_remove(struct pci_dev *);
+
+static struct pci_driver matrox_w1_pci_driver = {
+	.name = "matrox_w1",
+	.id_table = matrox_w1_tbl,
+	.probe = matrox_w1_probe,
+	.remove = matrox_w1_remove,
+};
+
+/*
+ * Matrox G400 DDC registers.
+ */
+
+#define MATROX_G400_DDC_CLK		(1<<4)
+#define MATROX_G400_DDC_DATA		(1<<1)
+
+#define MATROX_BASE			0x3C00
+#define MATROX_STATUS			0x1e14
+
+#define MATROX_PORT_INDEX_OFFSET	0x00
+#define MATROX_PORT_DATA_OFFSET		0x0A
+
+#define MATROX_GET_CONTROL		0x2A
+#define MATROX_GET_DATA			0x2B
+#define MATROX_CURSOR_CTL		0x06
+
+struct matrox_device
+{
+	void __iomem *base_addr;
+	void __iomem *port_index;
+	void __iomem *port_data;
+	u8 data_mask;
+
+	unsigned long phys_addr;
+	void __iomem *virt_addr;
+	unsigned long found;
+
+	struct w1_bus_master *bus_master;
+};
+
+static u8 matrox_w1_read_ddc_bit(void *);
+static void matrox_w1_write_ddc_bit(void *, u8);
+
+/*
+ * These functions read and write DDC Data bit.
+ *
+ * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
+ * Unfortunately we can't connect to Intel's 82801xx IO controller
+ * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
+ *
+ * I've heard that PIIX also has open drain pin.
+ *
+ * Port mapping.
+ */
+static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
+{
+	u8 ret;
+
+	writeb(reg, dev->port_index);
+	ret = readb(dev->port_data);
+	barrier();
+
+	return ret;
+}
+
+static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
+{
+	writeb(reg, dev->port_index);
+	writeb(val, dev->port_data);
+	wmb();
+}
+
+static void matrox_w1_write_ddc_bit(void *data, u8 bit)
+{
+	u8 ret;
+	struct matrox_device *dev = data;
+
+	if (bit)
+		bit = 0;
+	else
+		bit = dev->data_mask;
+
+	ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
+	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
+	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
+}
+
+static u8 matrox_w1_read_ddc_bit(void *data)
+{
+	u8 ret;
+	struct matrox_device *dev = data;
+
+	ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
+
+	return ret;
+}
+
+static void matrox_w1_hw_init(struct matrox_device *dev)
+{
+	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
+	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
+}
+
+static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct matrox_device *dev;
+	int err;
+
+	assert(pdev != NULL);
+	assert(ent != NULL);
+
+	if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
+		return -ENODEV;
+
+	dev = kzalloc(sizeof(struct matrox_device) +
+		       sizeof(struct w1_bus_master), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev,
+			"%s: Failed to create new matrox_device object.\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+
+	dev->bus_master = (struct w1_bus_master *)(dev + 1);
+
+	/*
+	 * True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
+	 */
+
+	dev->phys_addr = pci_resource_start(pdev, 1);
+
+	dev->virt_addr = ioremap_nocache(dev->phys_addr, 16384);
+	if (!dev->virt_addr) {
+		dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
+			__func__, dev->phys_addr, 16384);
+		err = -EIO;
+		goto err_out_free_device;
+	}
+
+	dev->base_addr = dev->virt_addr + MATROX_BASE;
+	dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
+	dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
+	dev->data_mask = (MATROX_G400_DDC_DATA);
+
+	matrox_w1_hw_init(dev);
+
+	dev->bus_master->data = dev;
+	dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
+	dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
+
+	err = w1_add_master_device(dev->bus_master);
+	if (err)
+		goto err_out_free_device;
+
+	pci_set_drvdata(pdev, dev);
+
+	dev->found = 1;
+
+	dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
+
+	return 0;
+
+err_out_free_device:
+	if (dev->virt_addr)
+		iounmap(dev->virt_addr);
+	kfree(dev);
+
+	return err;
+}
+
+static void matrox_w1_remove(struct pci_dev *pdev)
+{
+	struct matrox_device *dev = pci_get_drvdata(pdev);
+
+	assert(dev != NULL);
+
+	if (dev->found) {
+		w1_remove_master_device(dev->bus_master);
+		iounmap(dev->virt_addr);
+	}
+	kfree(dev);
+}
+
+static int __init matrox_w1_init(void)
+{
+	return pci_register_driver(&matrox_w1_pci_driver);
+}
+
+static void __exit matrox_w1_fini(void)
+{
+	pci_unregister_driver(&matrox_w1_pci_driver);
+}
+
+module_init(matrox_w1_init);
+module_exit(matrox_w1_fini);

drivers/w1/masters/mxc_w1.c

@@ -0,0 +1,178 @@
+/*
+ * Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Luotao Fu, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_log.h"
+
+/* According to the mx27 Datasheet the reset procedure should take up to about
+ * 1350us. We set the timeout to 500*100us = 50ms for sure */
+#define MXC_W1_RESET_TIMEOUT 500
+
+/*
+ * MXC W1 Register offsets
+ */
+#define MXC_W1_CONTROL          0x00
+#define MXC_W1_TIME_DIVIDER     0x02
+#define MXC_W1_RESET            0x04
+#define MXC_W1_COMMAND          0x06
+#define MXC_W1_TXRX             0x08
+#define MXC_W1_INTERRUPT        0x0A
+#define MXC_W1_INTERRUPT_EN     0x0C
+
+struct mxc_w1_device {
+	void __iomem *regs;
+	unsigned int clkdiv;
+	struct clk *clk;
+	struct w1_bus_master bus_master;
+};
+
+/*
+ * this is the low level routine to
+ * reset the device on the One Wire interface
+ * on the hardware
+ */
+static u8 mxc_w1_ds2_reset_bus(void *data)
+{
+	u8 reg_val;
+	unsigned int timeout_cnt = 0;
+	struct mxc_w1_device *dev = data;
+
+	__raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
+
+	while (1) {
+		reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
+
+		if (((reg_val >> 7) & 0x1) == 0 ||
+		    timeout_cnt > MXC_W1_RESET_TIMEOUT)
+			break;
+		else
+			timeout_cnt++;
+
+		udelay(100);
+	}
+	return (reg_val >> 7) & 0x1;
+}
+
+/*
+ * this is the low level routine to read/write a bit on the One Wire
+ * interface on the hardware. It does write 0 if parameter bit is set
+ * to 0, otherwise a write 1/read.
+ */
+static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
+{
+	struct mxc_w1_device *mdev = data;
+	void __iomem *ctrl_addr = mdev->regs + MXC_W1_CONTROL;
+	unsigned int timeout_cnt = 400; /* Takes max. 120us according to
+					 * datasheet.
+					 */
+
+	__raw_writeb((1 << (5 - bit)), ctrl_addr);
+
+	while (timeout_cnt--) {
+		if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
+			break;
+
+		udelay(1);
+	}
+
+	return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
+}
+
+static int mxc_w1_probe(struct platform_device *pdev)
+{
+	struct mxc_w1_device *mdev;
+	struct resource *res;
+	int err = 0;
+
+	mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device),
+			    GFP_KERNEL);
+	if (!mdev)
+		return -ENOMEM;
+
+	mdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mdev->clk))
+		return PTR_ERR(mdev->clk);
+
+	mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mdev->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mdev->regs))
+		return PTR_ERR(mdev->regs);
+
+	clk_prepare_enable(mdev->clk);
+	__raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER);
+
+	mdev->bus_master.data = mdev;
+	mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
+	mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
+
+	err = w1_add_master_device(&mdev->bus_master);
+
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, mdev);
+	return 0;
+}
+
+/*
+ * disassociate the w1 device from the driver
+ */
+static int mxc_w1_remove(struct platform_device *pdev)
+{
+	struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
+
+	w1_remove_master_device(&mdev->bus_master);
+
+	clk_disable_unprepare(mdev->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct of_device_id mxc_w1_dt_ids[] = {
+	{ .compatible = "fsl,imx21-owire" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
+
+static struct platform_driver mxc_w1_driver = {
+	.driver = {
+		.name = "mxc_w1",
+		.of_match_table = mxc_w1_dt_ids,
+	},
+	.probe = mxc_w1_probe,
+	.remove = mxc_w1_remove,
+};
+module_platform_driver(mxc_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductors Inc");
+MODULE_DESCRIPTION("Driver for One-Wire on MXC");

drivers/w1/masters/omap_hdq.c

@@ -0,0 +1,636 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007,2012 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/pm_runtime.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#define	MOD_NAME	"OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION			0x00
+#define OMAP_HDQ_TX_DATA			0x04
+#define OMAP_HDQ_RX_DATA			0x08
+#define OMAP_HDQ_CTRL_STATUS			0x0c
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK	(1<<6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE	(1<<5)
+#define OMAP_HDQ_CTRL_STATUS_GO			(1<<4)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION	(1<<2)
+#define OMAP_HDQ_CTRL_STATUS_DIR		(1<<1)
+#define OMAP_HDQ_CTRL_STATUS_MODE		(1<<0)
+#define OMAP_HDQ_INT_STATUS			0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE		(1<<2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE		(1<<1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT		(1<<0)
+#define OMAP_HDQ_SYSCONFIG			0x14
+#define OMAP_HDQ_SYSCONFIG_SOFTRESET		(1<<1)
+#define OMAP_HDQ_SYSCONFIG_AUTOIDLE		(1<<0)
+#define OMAP_HDQ_SYSSTATUS			0x18
+#define OMAP_HDQ_SYSSTATUS_RESETDONE		(1<<0)
+
+#define OMAP_HDQ_FLAG_CLEAR			0
+#define OMAP_HDQ_FLAG_SET			1
+#define OMAP_HDQ_TIMEOUT			(HZ/5)
+
+#define OMAP_HDQ_MAX_USER			4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+static int w1_id;
+
+struct hdq_data {
+	struct device		*dev;
+	void __iomem		*hdq_base;
+	/* lock status update */
+	struct  mutex		hdq_mutex;
+	int			hdq_usecount;
+	u8			hdq_irqstatus;
+	/* device lock */
+	spinlock_t		hdq_spinlock;
+	/*
+	 * Used to control the call to omap_hdq_get and omap_hdq_put.
+	 * HDQ Protocol: Write the CMD|REG_address first, followed by
+	 * the data wrire or read.
+	 */
+	int			init_trans;
+};
+
+static int omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
+
+static struct platform_driver omap_hdq_driver = {
+	.probe =	omap_hdq_probe,
+	.remove =	omap_hdq_remove,
+	.driver =	{
+		.name =	"omap_hdq",
+	},
+};
+
+static u8 omap_w1_read_byte(void *_hdq);
+static void omap_w1_write_byte(void *_hdq, u8 byte);
+static u8 omap_w1_reset_bus(void *_hdq);
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
+		u8 search_type,	w1_slave_found_callback slave_found);
+
+
+static struct w1_bus_master omap_w1_master = {
+	.read_byte	= omap_w1_read_byte,
+	.write_byte	= omap_w1_write_byte,
+	.reset_bus	= omap_w1_reset_bus,
+	.search		= omap_w1_search_bus,
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+	return __raw_readl(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+	__raw_writel(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+			u8 val, u8 mask)
+{
+	u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
+			| (val & mask);
+	__raw_writel(new_val, hdq_data->hdq_base + offset);
+
+	return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+		u8 flag, u8 flag_set, u8 *status)
+{
+	int ret = 0;
+	unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+	if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+		/* wait for the flag clear */
+		while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+			&& time_before(jiffies, timeout)) {
+			schedule_timeout_uninterruptible(1);
+		}
+		if (*status & flag)
+			ret = -ETIMEDOUT;
+	} else if (flag_set == OMAP_HDQ_FLAG_SET) {
+		/* wait for the flag set */
+		while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+			&& time_before(jiffies, timeout)) {
+			schedule_timeout_uninterruptible(1);
+		}
+		if (!(*status & flag))
+			ret = -ETIMEDOUT;
+	} else
+		return -EINVAL;
+
+	return ret;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+	int ret;
+	u8 tmp_status;
+	unsigned long irqflags;
+
+	*status = 0;
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	/* clear interrupt flags via a dummy read */
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+	/* ISR loads it with new INT_STATUS */
+	hdq_data->hdq_irqstatus = 0;
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+	hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+	/* set the GO bit */
+	hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+		OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+	/* wait for the TXCOMPLETE bit */
+	ret = wait_event_timeout(hdq_wait_queue,
+		hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+	if (ret == 0) {
+		dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	*status = hdq_data->hdq_irqstatus;
+	/* check irqstatus */
+	if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+		dev_dbg(hdq_data->dev, "timeout waiting for"
+			" TXCOMPLETE/RXCOMPLETE, %x", *status);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* wait for the GO bit return to zero */
+	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_GO,
+			OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+	if (ret) {
+		dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+			" return to zero, %x", tmp_status);
+	}
+
+out:
+	return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+	struct hdq_data *hdq_data = _hdq;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+	dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+
+	if (hdq_data->hdq_irqstatus &
+		(OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+		| OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+		/* wake up sleeping process */
+		wake_up(&hdq_wait_queue);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* HDQ Mode: always return success */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+	return 0;
+}
+
+/* W1 search callback function */
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
+		u8 search_type, w1_slave_found_callback slave_found)
+{
+	u64 module_id, rn_le, cs, id;
+
+	if (w1_id)
+		module_id = w1_id;
+	else
+		module_id = 0x1;
+
+	rn_le = cpu_to_le64(module_id);
+	/*
+	 * HDQ might not obey truly the 1-wire spec.
+	 * So calculate CRC based on module parameter.
+	 */
+	cs = w1_calc_crc8((u8 *)&rn_le, 7);
+	id = (cs << 56) | module_id;
+
+	slave_found(master_dev, id);
+}
+
+static int _omap_hdq_reset(struct hdq_data *hdq_data)
+{
+	int ret;
+	u8 tmp_status;
+
+	hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET);
+	/*
+	 * Select HDQ mode & enable clocks.
+	 * It is observed that INT flags can't be cleared via a read and GO/INIT
+	 * won't return to zero if interrupt is disabled. So we always enable
+	 * interrupt.
+	 */
+	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+		OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+
+	/* wait for reset to complete */
+	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
+		OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
+	if (ret)
+		dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
+				tmp_status);
+	else {
+		hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+			OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+		hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+			OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+	}
+
+	return ret;
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+	int ret = 0;
+	u8 tmp_status;
+	unsigned long irqflags;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	/* clear interrupt flags via a dummy read */
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+	/* ISR loads it with new INT_STATUS */
+	hdq_data->hdq_irqstatus = 0;
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+	/* set the INIT and GO bit */
+	hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+		OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+		OMAP_HDQ_CTRL_STATUS_GO);
+
+	/* wait for the TIMEOUT bit */
+	ret = wait_event_timeout(hdq_wait_queue,
+		hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+	if (ret == 0) {
+		dev_dbg(hdq_data->dev, "break wait elapsed\n");
+		ret = -EINTR;
+		goto out;
+	}
+
+	tmp_status = hdq_data->hdq_irqstatus;
+	/* check irqstatus */
+	if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+		dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+				tmp_status);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+	/*
+	 * wait for both INIT and GO bits rerurn to zero.
+	 * zero wait time expected for interrupt mode.
+	 */
+	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+			OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+			&tmp_status);
+	if (ret)
+		dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+			" return to zero, %x", tmp_status);
+
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+	int ret = 0;
+	u8 status;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	if (!hdq_data->hdq_usecount) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+		/*
+		 * The RX comes immediately after TX.
+		 */
+		wait_event_timeout(hdq_wait_queue,
+				   (hdq_data->hdq_irqstatus
+				    & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				   OMAP_HDQ_TIMEOUT);
+
+		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+			OMAP_HDQ_CTRL_STATUS_DIR);
+		status = hdq_data->hdq_irqstatus;
+		/* check irqstatus */
+		if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+			dev_dbg(hdq_data->dev, "timeout waiting for"
+				" RXCOMPLETE, %x", status);
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+	/* the data is ready. Read it in! */
+	*val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+
+}
+
+/* Enable clocks and set the controller to HDQ mode */
+static int omap_hdq_get(struct hdq_data *hdq_data)
+{
+	int ret = 0;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
+		dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
+		ret = -EINVAL;
+		goto out;
+	} else {
+		hdq_data->hdq_usecount++;
+		try_module_get(THIS_MODULE);
+		if (1 == hdq_data->hdq_usecount) {
+
+			pm_runtime_get_sync(hdq_data->dev);
+
+			/* make sure HDQ is out of reset */
+			if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
+				OMAP_HDQ_SYSSTATUS_RESETDONE)) {
+				ret = _omap_hdq_reset(hdq_data);
+				if (ret)
+					/* back up the count */
+					hdq_data->hdq_usecount--;
+			} else {
+				/* select HDQ mode & enable clocks */
+				hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+					OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+					OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+				hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+					OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+				hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+			}
+		}
+	}
+
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+}
+
+/* Disable clocks to the module */
+static int omap_hdq_put(struct hdq_data *hdq_data)
+{
+	int ret = 0;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0)
+		return -EINTR;
+
+	if (0 == hdq_data->hdq_usecount) {
+		dev_dbg(hdq_data->dev, "attempt to decrement use count"
+			" when it is zero");
+		ret = -EINVAL;
+	} else {
+		hdq_data->hdq_usecount--;
+		module_put(THIS_MODULE);
+		if (0 == hdq_data->hdq_usecount)
+			pm_runtime_put_sync(hdq_data->dev);
+	}
+	mutex_unlock(&hdq_data->hdq_mutex);
+
+	return ret;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+	struct hdq_data *hdq_data = _hdq;
+	u8 val = 0;
+	int ret;
+
+	ret = hdq_read_byte(hdq_data, &val);
+	if (ret) {
+		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+		if (ret < 0) {
+			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+			return -EINTR;
+		}
+		hdq_data->init_trans = 0;
+		mutex_unlock(&hdq_data->hdq_mutex);
+		omap_hdq_put(hdq_data);
+		return -1;
+	}
+
+	/* Write followed by a read, release the module */
+	if (hdq_data->init_trans) {
+		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+		if (ret < 0) {
+			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+			return -EINTR;
+		}
+		hdq_data->init_trans = 0;
+		mutex_unlock(&hdq_data->hdq_mutex);
+		omap_hdq_put(hdq_data);
+	}
+
+	return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+	struct hdq_data *hdq_data = _hdq;
+	int ret;
+	u8 status;
+
+	/* First write to initialize the transfer */
+	if (hdq_data->init_trans == 0)
+		omap_hdq_get(hdq_data);
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+		return;
+	}
+	hdq_data->init_trans++;
+	mutex_unlock(&hdq_data->hdq_mutex);
+
+	ret = hdq_write_byte(hdq_data, byte, &status);
+	if (ret < 0) {
+		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+		return;
+	}
+
+	/* Second write, data transferred. Release the module */
+	if (hdq_data->init_trans > 1) {
+		omap_hdq_put(hdq_data);
+		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+		if (ret < 0) {
+			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+			return;
+		}
+		hdq_data->init_trans = 0;
+		mutex_unlock(&hdq_data->hdq_mutex);
+	}
+}
+
+static int omap_hdq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hdq_data *hdq_data;
+	struct resource *res;
+	int ret, irq;
+	u8 rev;
+
+	hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL);
+	if (!hdq_data) {
+		dev_dbg(&pdev->dev, "unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	hdq_data->dev = dev;
+	platform_set_drvdata(pdev, hdq_data);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdq_data->hdq_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(hdq_data->hdq_base))
+		return PTR_ERR(hdq_data->hdq_base);
+
+	hdq_data->hdq_usecount = 0;
+	mutex_init(&hdq_data->hdq_mutex);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+	dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+		(rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+	spin_lock_init(&hdq_data->hdq_spinlock);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq	< 0) {
+		ret = -ENXIO;
+		goto err_irq;
+	}
+
+	ret = devm_request_irq(dev, irq, hdq_isr, IRQF_DISABLED,
+			"omap_hdq", hdq_data);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "could not request irq\n");
+		goto err_irq;
+	}
+
+	omap_hdq_break(hdq_data);
+
+	pm_runtime_put_sync(&pdev->dev);
+
+	omap_w1_master.data = hdq_data;
+
+	ret = w1_add_master_device(&omap_w1_master);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+		goto err_w1;
+	}
+
+	return 0;
+
+err_irq:
+	pm_runtime_put_sync(&pdev->dev);
+err_w1:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+	struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+
+	mutex_lock(&hdq_data->hdq_mutex);
+
+	if (hdq_data->hdq_usecount) {
+		dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+		mutex_unlock(&hdq_data->hdq_mutex);
+		return -EBUSY;
+	}
+
+	mutex_unlock(&hdq_data->hdq_mutex);
+
+	/* remove module dependency */
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+module_platform_driver(omap_hdq_driver);
+
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ driver Library");
+MODULE_LICENSE("GPL");

drivers/w1/masters/w1-gpio.c

@@ -0,0 +1,224 @@
+/*
+ * w1-gpio - GPIO w1 bus master driver
+ *
+ * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/w1-gpio.h>
+#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/err.h>
+#include <linux/of.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+static void w1_gpio_write_bit_dir(void *data, u8 bit)
+{
+	struct w1_gpio_platform_data *pdata = data;
+
+	if (bit)
+		gpio_direction_input(pdata->pin);
+	else
+		gpio_direction_output(pdata->pin, 0);
+}
+
+static void w1_gpio_write_bit_val(void *data, u8 bit)
+{
+	struct w1_gpio_platform_data *pdata = data;
+
+	gpio_set_value(pdata->pin, bit);
+}
+
+static u8 w1_gpio_read_bit(void *data)
+{
+	struct w1_gpio_platform_data *pdata = data;
+
+	return gpio_get_value(pdata->pin) ? 1 : 0;
+}
+
+#if defined(CONFIG_OF)
+static struct of_device_id w1_gpio_dt_ids[] = {
+	{ .compatible = "w1-gpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+#endif
+
+static int w1_gpio_probe_dt(struct platform_device *pdev)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (of_get_property(np, "linux,open-drain", NULL))
+		pdata->is_open_drain = 1;
+
+	pdata->pin = of_get_gpio(np, 0);
+	pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+
+static int w1_gpio_probe(struct platform_device *pdev)
+{
+	struct w1_bus_master *master;
+	struct w1_gpio_platform_data *pdata;
+	struct pinctrl *pinctrl;
+	int err;
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev, "unable to select pin group\n");
+
+	if (of_have_populated_dt()) {
+		err = w1_gpio_probe_dt(pdev);
+		if (err < 0) {
+			dev_err(&pdev->dev, "Failed to parse DT\n");
+			return err;
+		}
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No configuration data\n");
+		return -ENXIO;
+	}
+
+	master = kzalloc(sizeof(struct w1_bus_master), GFP_KERNEL);
+	if (!master) {
+		dev_err(&pdev->dev, "Out of memory\n");
+		return -ENOMEM;
+	}
+
+	err = gpio_request(pdata->pin, "w1");
+	if (err) {
+		dev_err(&pdev->dev, "gpio_request (pin) failed\n");
+		goto free_master;
+	}
+
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
+		err = gpio_request_one(pdata->ext_pullup_enable_pin,
+				       GPIOF_INIT_LOW, "w1 pullup");
+		if (err < 0) {
+			dev_err(&pdev->dev, "gpio_request_one "
+					"(ext_pullup_enable_pin) failed\n");
+			goto free_gpio;
+		}
+	}
+
+	master->data = pdata;
+	master->read_bit = w1_gpio_read_bit;
+
+	if (pdata->is_open_drain) {
+		gpio_direction_output(pdata->pin, 1);
+		master->write_bit = w1_gpio_write_bit_val;
+	} else {
+		gpio_direction_input(pdata->pin);
+		master->write_bit = w1_gpio_write_bit_dir;
+	}
+
+	err = w1_add_master_device(master);
+	if (err) {
+		dev_err(&pdev->dev, "w1_add_master device failed\n");
+		goto free_gpio_ext_pu;
+	}
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(1);
+
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_set_value(pdata->ext_pullup_enable_pin, 1);
+
+	platform_set_drvdata(pdev, master);
+
+	return 0;
+
+ free_gpio_ext_pu:
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_free(pdata->ext_pullup_enable_pin);
+ free_gpio:
+	gpio_free(pdata->pin);
+ free_master:
+	kfree(master);
+
+	return err;
+}
+
+static int w1_gpio_remove(struct platform_device *pdev)
+{
+	struct w1_bus_master *master = platform_get_drvdata(pdev);
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(0);
+
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_set_value(pdata->ext_pullup_enable_pin, 0);
+
+	w1_remove_master_device(master);
+	gpio_free(pdata->pin);
+	kfree(master);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int w1_gpio_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(0);
+
+	return 0;
+}
+
+static int w1_gpio_resume(struct platform_device *pdev)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->enable_external_pullup)
+		pdata->enable_external_pullup(1);
+
+	return 0;
+}
+
+#else
+#define w1_gpio_suspend	NULL
+#define w1_gpio_resume	NULL
+#endif
+
+static struct platform_driver w1_gpio_driver = {
+	.driver = {
+		.name	= "w1-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
+	},
+	.probe = w1_gpio_probe,
+	.remove	= w1_gpio_remove,
+	.suspend = w1_gpio_suspend,
+	.resume = w1_gpio_resume,
+};
+
+module_platform_driver(w1_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO w1 bus master driver");
+MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
+MODULE_LICENSE("GPL");