Initial commit; kernel source import

This commit is contained in:
Nathan
2025-04-06 23:50:55 -05:00
commit 25c6d769f4
45093 changed files with 18199410 additions and 0 deletions

View File

@@ -0,0 +1,27 @@
#
# Makefile for local APIC drivers and for the IO-APIC code
#
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o ipi.o
obj-y += hw_nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_SMP) += ipi.o
ifeq ($(CONFIG_X86_64),y)
# APIC probe will depend on the listing order here
obj-$(CONFIG_X86_NUMACHIP) += apic_numachip.o
obj-$(CONFIG_X86_UV) += x2apic_uv_x.o
obj-$(CONFIG_X86_X2APIC) += x2apic_phys.o
obj-$(CONFIG_X86_X2APIC) += x2apic_cluster.o
obj-y += apic_flat_64.o
endif
# APIC probe will depend on the listing order here
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT) += summit_32.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o
obj-$(CONFIG_X86_ES7000) += es7000_32.o
# For 32bit, probe_32 need to be listed last
obj-$(CONFIG_X86_LOCAL_APIC) += probe_$(BITS).o

2546
arch/x86/kernel/apic/apic.c Normal file

File diff suppressed because it is too large Load Diff

View File

@@ -0,0 +1,336 @@
/*
* Copyright 2004 James Cleverdon, IBM.
* Subject to the GNU Public License, v.2
*
* Flat APIC subarch code.
*
* Hacked for x86-64 by James Cleverdon from i386 architecture code by
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
#include <linux/errno.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/module.h>
#include <asm/smp.h>
#include <asm/apic.h>
#include <asm/ipi.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
static struct apic apic_physflat;
static struct apic apic_flat;
struct apic __read_mostly *apic = &apic_flat;
EXPORT_SYMBOL_GPL(apic);
static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return 1;
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
void flat_init_apic_ldr(void)
{
unsigned long val;
unsigned long num, id;
num = smp_processor_id();
id = 1UL << num;
apic_write(APIC_DFR, APIC_DFR_FLAT);
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
val |= SET_APIC_LOGICAL_ID(id);
apic_write(APIC_LDR, val);
}
static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
{
unsigned long flags;
local_irq_save(flags);
__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
local_irq_restore(flags);
}
static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
_flat_send_IPI_mask(mask, vector);
}
static void
flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
int cpu = smp_processor_id();
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
static void flat_send_IPI_allbutself(int vector)
{
int cpu = smp_processor_id();
#ifdef CONFIG_HOTPLUG_CPU
int hotplug = 1;
#else
int hotplug = 0;
#endif
if (hotplug || vector == NMI_VECTOR) {
if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) {
unsigned long mask = cpumask_bits(cpu_online_mask)[0];
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
} else if (num_online_cpus() > 1) {
__default_send_IPI_shortcut(APIC_DEST_ALLBUT,
vector, apic->dest_logical);
}
}
static void flat_send_IPI_all(int vector)
{
if (vector == NMI_VECTOR) {
flat_send_IPI_mask(cpu_online_mask, vector);
} else {
__default_send_IPI_shortcut(APIC_DEST_ALLINC,
vector, apic->dest_logical);
}
}
static unsigned int flat_get_apic_id(unsigned long x)
{
unsigned int id;
id = (((x)>>24) & 0xFFu);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = ((id & 0xFFu)<<24);
return x;
}
static unsigned int read_xapic_id(void)
{
unsigned int id;
id = flat_get_apic_id(apic_read(APIC_ID));
return id;
}
static int flat_apic_id_registered(void)
{
return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
{
return initial_apic_id >> index_msb;
}
static int flat_probe(void)
{
return 1;
}
static struct apic apic_flat = {
.name = "flat",
.probe = flat_probe,
.acpi_madt_oem_check = flat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
.irq_dest_mode = 1, /* logical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = flat_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = flat_get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
.cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
.send_IPI_allbutself = flat_send_IPI_allbutself,
.send_IPI_all = flat_send_IPI_all,
.send_IPI_self = apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
/*
* Physflat mode is used when there are more than 8 CPUs on a system.
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
return 1;
}
#endif
return 0;
}
static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
{
default_send_IPI_mask_sequence_phys(cpumask, vector);
}
static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
int vector)
{
default_send_IPI_mask_allbutself_phys(cpumask, vector);
}
static void physflat_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
}
static void physflat_send_IPI_all(int vector)
{
physflat_send_IPI_mask(cpu_online_mask, vector);
}
static int physflat_probe(void)
{
if (apic == &apic_physflat || num_possible_cpus() > 8)
return 1;
return 0;
}
static struct apic apic_physflat = {
.name = "physical flat",
.probe = physflat_probe,
.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = default_vector_allocation_domain,
/* not needed, but shouldn't hurt: */
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = flat_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = flat_get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
.cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = physflat_send_IPI_mask,
.send_IPI_mask_allbutself = physflat_send_IPI_mask_allbutself,
.send_IPI_allbutself = physflat_send_IPI_allbutself,
.send_IPI_all = physflat_send_IPI_all,
.send_IPI_self = apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
/*
* We need to check for physflat first, so this order is important.
*/
apic_drivers(apic_physflat, apic_flat);

View File

@@ -0,0 +1,192 @@
/*
* NOOP APIC driver.
*
* Does almost nothing and should be substituted by a real apic driver via
* probe routine.
*
* Though in case if apic is disabled (for some reason) we try
* to not uglify the caller's code and allow to call (some) apic routines
* like self-ipi, etc...
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
#include <asm/apic.h>
#include <asm/setup.h>
#include <linux/smp.h>
#include <asm/ipi.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/e820.h>
static void noop_init_apic_ldr(void) { }
static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
static void noop_send_IPI_allbutself(int vector) { }
static void noop_send_IPI_all(int vector) { }
static void noop_send_IPI_self(int vector) { }
static void noop_apic_wait_icr_idle(void) { }
static void noop_apic_icr_write(u32 low, u32 id) { }
static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
{
return -1;
}
static u32 noop_safe_apic_wait_icr_idle(void)
{
return 0;
}
static u64 noop_apic_icr_read(void)
{
return 0;
}
static int noop_phys_pkg_id(int cpuid_apic, int index_msb)
{
return 0;
}
static unsigned int noop_get_apic_id(unsigned long x)
{
return 0;
}
static int noop_probe(void)
{
/*
* NOOP apic should not ever be
* enabled via probe routine
*/
return 0;
}
static int noop_apic_id_registered(void)
{
/*
* if we would be really "pedantic"
* we should pass read_apic_id() here
* but since NOOP suppose APIC ID = 0
* lets save a few cycles
*/
return physid_isset(0, phys_cpu_present_map);
}
static const struct cpumask *noop_target_cpus(void)
{
/* only BSP here */
return cpumask_of(0);
}
static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid)
{
return physid_isset(apicid, *map);
}
static unsigned long noop_check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask,
const struct cpumask *mask)
{
if (cpu != 0)
pr_warning("APIC: Vector allocated for non-BSP cpu\n");
cpumask_copy(retmask, cpumask_of(cpu));
}
static u32 noop_apic_read(u32 reg)
{
WARN_ON_ONCE((cpu_has_apic && !disable_apic));
return 0;
}
static void noop_apic_write(u32 reg, u32 v)
{
WARN_ON_ONCE(cpu_has_apic && !disable_apic);
}
struct apic apic_noop = {
.name = "noop",
.probe = noop_probe,
.acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = noop_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* logical delivery broadcast to all CPUs: */
.irq_dest_mode = 1,
.target_cpus = noop_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = noop_check_apicid_used,
.check_apicid_present = noop_check_apicid_present,
.vector_allocation_domain = noop_vector_allocation_domain,
.init_apic_ldr = noop_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = noop_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = noop_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
.cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = noop_send_IPI_mask,
.send_IPI_mask_allbutself = noop_send_IPI_mask_allbutself,
.send_IPI_allbutself = noop_send_IPI_allbutself,
.send_IPI_all = noop_send_IPI_all,
.send_IPI_self = noop_send_IPI_self,
.wakeup_secondary_cpu = noop_wakeup_secondary_cpu,
/* should be safe */
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = NULL,
.read = noop_apic_read,
.write = noop_apic_write,
.eoi_write = noop_apic_write,
.icr_read = noop_apic_icr_read,
.icr_write = noop_apic_icr_write,
.wait_icr_idle = noop_apic_wait_icr_idle,
.safe_wait_icr_idle = noop_safe_apic_wait_icr_idle,
#ifdef CONFIG_X86_32
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
#endif
};

View File

@@ -0,0 +1,264 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Numascale NumaConnect-Specific APIC Code
*
* Copyright (C) 2011 Numascale AS. All rights reserved.
*
* Send feedback to <support@numascale.com>
*
*/
#include <linux/errno.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/delay.h>
#include <asm/numachip/numachip.h>
#include <asm/numachip/numachip_csr.h>
#include <asm/smp.h>
#include <asm/apic.h>
#include <asm/ipi.h>
#include <asm/apic_flat_64.h>
#include <asm/pgtable.h>
static int numachip_system __read_mostly;
static const struct apic apic_numachip __read_mostly;
static unsigned int get_apic_id(unsigned long x)
{
unsigned long value;
unsigned int id;
rdmsrl(MSR_FAM10H_NODE_ID, value);
id = ((x >> 24) & 0xffU) | ((value << 2) & 0x3f00U);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = ((id & 0xffU) << 24);
return x;
}
static unsigned int read_xapic_id(void)
{
return get_apic_id(apic_read(APIC_ID));
}
static int numachip_apic_id_valid(int apicid)
{
/* Trust what bootloader passes in MADT */
return 1;
}
static int numachip_apic_id_registered(void)
{
return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static int numachip_phys_pkg_id(int initial_apic_id, int index_msb)
{
return initial_apic_id >> index_msb;
}
static int __cpuinit numachip_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
union numachip_csr_g3_ext_irq_gen int_gen;
int_gen.s._destination_apic_id = phys_apicid;
int_gen.s._vector = 0;
int_gen.s._msgtype = APIC_DM_INIT >> 8;
int_gen.s._index = 0;
write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
int_gen.s._msgtype = APIC_DM_STARTUP >> 8;
int_gen.s._vector = start_rip >> 12;
write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
atomic_set(&init_deasserted, 1);
return 0;
}
static void numachip_send_IPI_one(int cpu, int vector)
{
union numachip_csr_g3_ext_irq_gen int_gen;
int apicid = per_cpu(x86_cpu_to_apicid, cpu);
int_gen.s._destination_apic_id = apicid;
int_gen.s._vector = vector;
int_gen.s._msgtype = (vector == NMI_VECTOR ? APIC_DM_NMI : APIC_DM_FIXED) >> 8;
int_gen.s._index = 0;
write_lcsr(CSR_G3_EXT_IRQ_GEN, int_gen.v);
}
static void numachip_send_IPI_mask(const struct cpumask *mask, int vector)
{
unsigned int cpu;
for_each_cpu(cpu, mask)
numachip_send_IPI_one(cpu, vector);
}
static void numachip_send_IPI_mask_allbutself(const struct cpumask *mask,
int vector)
{
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
for_each_cpu(cpu, mask) {
if (cpu != this_cpu)
numachip_send_IPI_one(cpu, vector);
}
}
static void numachip_send_IPI_allbutself(int vector)
{
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
for_each_online_cpu(cpu) {
if (cpu != this_cpu)
numachip_send_IPI_one(cpu, vector);
}
}
static void numachip_send_IPI_all(int vector)
{
numachip_send_IPI_mask(cpu_online_mask, vector);
}
static void numachip_send_IPI_self(int vector)
{
__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
static int __init numachip_probe(void)
{
return apic == &apic_numachip;
}
static void __init map_csrs(void)
{
printk(KERN_INFO "NumaChip: Mapping local CSR space (%016llx - %016llx)\n",
NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_BASE + NUMACHIP_LCSR_SIZE - 1);
init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE);
printk(KERN_INFO "NumaChip: Mapping global CSR space (%016llx - %016llx)\n",
NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_BASE + NUMACHIP_GCSR_SIZE - 1);
init_extra_mapping_uc(NUMACHIP_GCSR_BASE, NUMACHIP_GCSR_SIZE);
}
static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
{
if (c->phys_proc_id != node) {
c->phys_proc_id = node;
per_cpu(cpu_llc_id, smp_processor_id()) = node;
}
}
static int __init numachip_system_init(void)
{
unsigned int val;
if (!numachip_system)
return 0;
x86_cpuinit.fixup_cpu_id = fixup_cpu_id;
x86_init.pci.arch_init = pci_numachip_init;
map_csrs();
val = read_lcsr(CSR_G0_NODE_IDS);
printk(KERN_INFO "NumaChip: Local NodeID = %08x\n", val);
return 0;
}
early_initcall(numachip_system_init);
static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strncmp(oem_id, "NUMASC", 6)) {
numachip_system = 1;
return 1;
}
return 0;
}
static const struct apic apic_numachip __refconst = {
.name = "NumaConnect system",
.probe = numachip_probe,
.acpi_madt_oem_check = numachip_acpi_madt_oem_check,
.apic_id_valid = numachip_apic_id_valid,
.apic_id_registered = numachip_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = numachip_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = 0xffU << 24,
.cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = numachip_send_IPI_mask,
.send_IPI_mask_allbutself = numachip_send_IPI_mask_allbutself,
.send_IPI_allbutself = numachip_send_IPI_allbutself,
.send_IPI_all = numachip_send_IPI_all,
.send_IPI_self = numachip_send_IPI_self,
.wakeup_secondary_cpu = numachip_wakeup_secondary,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = NULL, /* REMRD not supported */
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
apic_driver(apic_numachip);

View File

@@ -0,0 +1,238 @@
/*
* APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs.
*
* Drives the local APIC in "clustered mode".
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/smp.h>
#include <asm/apicdef.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <asm/ipi.h>
static unsigned bigsmp_get_apic_id(unsigned long x)
{
return (x >> 24) & 0xFF;
}
static int bigsmp_apic_id_registered(void)
{
return 1;
}
static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid)
{
return 0;
}
static unsigned long bigsmp_check_apicid_present(int bit)
{
return 1;
}
static int bigsmp_early_logical_apicid(int cpu)
{
/* on bigsmp, logical apicid is the same as physical */
return early_per_cpu(x86_cpu_to_apicid, cpu);
}
static inline unsigned long calculate_ldr(int cpu)
{
unsigned long val, id;
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
id = per_cpu(x86_bios_cpu_apicid, cpu);
val |= SET_APIC_LOGICAL_ID(id);
return val;
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
static void bigsmp_init_apic_ldr(void)
{
unsigned long val;
int cpu = smp_processor_id();
apic_write(APIC_DFR, APIC_DFR_FLAT);
val = calculate_ldr(cpu);
apic_write(APIC_LDR, val);
}
static void bigsmp_setup_apic_routing(void)
{
printk(KERN_INFO
"Enabling APIC mode: Physflat. Using %d I/O APICs\n",
nr_ioapics);
}
static int bigsmp_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < nr_cpu_ids)
return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
return BAD_APICID;
}
static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
{
/* For clustered we don't have a good way to do this yet - hack */
physids_promote(0xFFL, retmap);
}
static int bigsmp_check_phys_apicid_present(int phys_apicid)
{
return 1;
}
static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_phys(mask, vector);
}
static void bigsmp_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
}
static void bigsmp_send_IPI_all(int vector)
{
bigsmp_send_IPI_mask(cpu_online_mask, vector);
}
static int dmi_bigsmp; /* can be set by dmi scanners */
static int hp_ht_bigsmp(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
dmi_bigsmp = 1;
return 0;
}
static const struct dmi_system_id bigsmp_dmi_table[] = {
{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
}
},
{ hp_ht_bigsmp, "HP ProLiant DL740",
{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
}
},
{ } /* NULL entry stops DMI scanning */
};
static int probe_bigsmp(void)
{
if (def_to_bigsmp)
dmi_bigsmp = 1;
else
dmi_check_system(bigsmp_dmi_table);
return dmi_bigsmp;
}
static struct apic apic_bigsmp = {
.name = "bigsmp",
.probe = probe_bigsmp,
.acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = bigsmp_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
/* phys delivery to target CPU: */
.irq_dest_mode = 0,
.target_cpus = default_target_cpus,
.disable_esr = 1,
.dest_logical = 0,
.check_apicid_used = bigsmp_check_apicid_used,
.check_apicid_present = bigsmp_check_apicid_present,
.vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
.setup_apic_routing = bigsmp_setup_apic_routing,
.multi_timer_check = NULL,
.cpu_present_to_apicid = bigsmp_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
.setup_portio_remap = NULL,
.check_phys_apicid_present = bigsmp_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = bigsmp_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = bigsmp_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
.cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = bigsmp_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = bigsmp_send_IPI_allbutself,
.send_IPI_all = bigsmp_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = default_wait_for_init_deassert,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = bigsmp_early_logical_apicid,
};
void __init generic_bigsmp_probe(void)
{
unsigned int cpu;
if (!probe_bigsmp())
return;
apic = &apic_bigsmp;
for_each_possible_cpu(cpu) {
if (early_per_cpu(x86_cpu_to_logical_apicid,
cpu) == BAD_APICID)
continue;
early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
bigsmp_early_logical_apicid(cpu);
}
pr_info("Overriding APIC driver with %s\n", apic_bigsmp.name);
}
apic_driver(apic_bigsmp);

View File

@@ -0,0 +1,746 @@
/*
* Written by: Garry Forsgren, Unisys Corporation
* Natalie Protasevich, Unisys Corporation
*
* This file contains the code to configure and interface
* with Unisys ES7000 series hardware system manager.
*
* Copyright (c) 2003 Unisys Corporation.
* Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
*
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Contact information: Unisys Corporation, Township Line & Union Meeting
* Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
*
* http://www.unisys.com
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/notifier.h>
#include <linux/spinlock.h>
#include <linux/cpumask.h>
#include <linux/threads.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/nmi.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/apicdef.h>
#include <linux/atomic.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/ipi.h>
/*
* ES7000 chipsets
*/
#define NON_UNISYS 0
#define ES7000_CLASSIC 1
#define ES7000_ZORRO 2
#define MIP_REG 1
#define MIP_PSAI_REG 4
#define MIP_BUSY 1
#define MIP_SPIN 0xf0000
#define MIP_VALID 0x0100000000000000ULL
#define MIP_SW_APIC 0x1020b
#define MIP_PORT(val) ((val >> 32) & 0xffff)
#define MIP_RD_LO(val) (val & 0xffffffff)
struct mip_reg {
unsigned long long off_0x00;
unsigned long long off_0x08;
unsigned long long off_0x10;
unsigned long long off_0x18;
unsigned long long off_0x20;
unsigned long long off_0x28;
unsigned long long off_0x30;
unsigned long long off_0x38;
};
struct mip_reg_info {
unsigned long long mip_info;
unsigned long long delivery_info;
unsigned long long host_reg;
unsigned long long mip_reg;
};
struct psai {
unsigned long long entry_type;
unsigned long long addr;
unsigned long long bep_addr;
};
#ifdef CONFIG_ACPI
struct es7000_oem_table {
struct acpi_table_header Header;
u32 OEMTableAddr;
u32 OEMTableSize;
};
static unsigned long oem_addrX;
static unsigned long oem_size;
#endif
/*
* ES7000 Globals
*/
static volatile unsigned long *psai;
static struct mip_reg *mip_reg;
static struct mip_reg *host_reg;
static int mip_port;
static unsigned long mip_addr;
static unsigned long host_addr;
int es7000_plat;
/*
* GSI override for ES7000 platforms.
*/
static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
{
unsigned long vect = 0, psaival = 0;
if (psai == NULL)
return -1;
vect = ((unsigned long)__pa(eip)/0x1000) << 16;
psaival = (0x1000000 | vect | cpu);
while (*psai & 0x1000000)
;
*psai = psaival;
return 0;
}
static int es7000_apic_is_cluster(void)
{
/* MPENTIUMIII */
if (boot_cpu_data.x86 == 6 &&
(boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
return 1;
return 0;
}
static void setup_unisys(void)
{
/*
* Determine the generation of the ES7000 currently running.
*
* es7000_plat = 1 if the machine is a 5xx ES7000 box
* es7000_plat = 2 if the machine is a x86_64 ES7000 box
*
*/
if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
es7000_plat = ES7000_ZORRO;
else
es7000_plat = ES7000_CLASSIC;
}
/*
* Parse the OEM Table:
*/
static int parse_unisys_oem(char *oemptr)
{
int i;
int success = 0;
unsigned char type, size;
unsigned long val;
char *tp = NULL;
struct psai *psaip = NULL;
struct mip_reg_info *mi;
struct mip_reg *host, *mip;
tp = oemptr;
tp += 8;
for (i = 0; i <= 6; i++) {
type = *tp++;
size = *tp++;
tp -= 2;
switch (type) {
case MIP_REG:
mi = (struct mip_reg_info *)tp;
val = MIP_RD_LO(mi->host_reg);
host_addr = val;
host = (struct mip_reg *)val;
host_reg = __va(host);
val = MIP_RD_LO(mi->mip_reg);
mip_port = MIP_PORT(mi->mip_info);
mip_addr = val;
mip = (struct mip_reg *)val;
mip_reg = __va(mip);
pr_debug("host_reg = 0x%lx\n",
(unsigned long)host_reg);
pr_debug("mip_reg = 0x%lx\n",
(unsigned long)mip_reg);
success++;
break;
case MIP_PSAI_REG:
psaip = (struct psai *)tp;
if (tp != NULL) {
if (psaip->addr)
psai = __va(psaip->addr);
else
psai = NULL;
success++;
}
break;
default:
break;
}
tp += size;
}
if (success < 2)
es7000_plat = NON_UNISYS;
else
setup_unisys();
return es7000_plat;
}
#ifdef CONFIG_ACPI
static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
{
struct acpi_table_header *header = NULL;
struct es7000_oem_table *table;
acpi_size tbl_size;
acpi_status ret;
int i = 0;
for (;;) {
ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
if (!ACPI_SUCCESS(ret))
return -1;
if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
break;
early_acpi_os_unmap_memory(header, tbl_size);
}
table = (void *)header;
oem_addrX = table->OEMTableAddr;
oem_size = table->OEMTableSize;
early_acpi_os_unmap_memory(header, tbl_size);
*oem_addr = (unsigned long)__acpi_map_table(oem_addrX, oem_size);
return 0;
}
static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
{
if (!oem_addr)
return;
__acpi_unmap_table((char *)oem_addr, oem_size);
}
static int es7000_check_dsdt(void)
{
struct acpi_table_header header;
if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
!strncmp(header.oem_id, "UNISYS", 6))
return 1;
return 0;
}
static int es7000_acpi_ret;
/* Hook from generic ACPI tables.c */
static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
unsigned long oem_addr = 0;
int check_dsdt;
int ret = 0;
/* check dsdt at first to avoid clear fix_map for oem_addr */
check_dsdt = es7000_check_dsdt();
if (!find_unisys_acpi_oem_table(&oem_addr)) {
if (check_dsdt) {
ret = parse_unisys_oem((char *)oem_addr);
} else {
setup_unisys();
ret = 1;
}
/*
* we need to unmap it
*/
unmap_unisys_acpi_oem_table(oem_addr);
}
es7000_acpi_ret = ret;
return ret && !es7000_apic_is_cluster();
}
static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
{
int ret = es7000_acpi_ret;
return ret && es7000_apic_is_cluster();
}
#else /* !CONFIG_ACPI: */
static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return 0;
}
static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
{
return 0;
}
#endif /* !CONFIG_ACPI */
static void es7000_spin(int n)
{
int i = 0;
while (i++ < n)
rep_nop();
}
static int es7000_mip_write(struct mip_reg *mip_reg)
{
int status = 0;
int spin;
spin = MIP_SPIN;
while ((host_reg->off_0x38 & MIP_VALID) != 0) {
if (--spin <= 0) {
WARN(1, "Timeout waiting for Host Valid Flag\n");
return -1;
}
es7000_spin(MIP_SPIN);
}
memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
outb(1, mip_port);
spin = MIP_SPIN;
while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
if (--spin <= 0) {
WARN(1, "Timeout waiting for MIP Valid Flag\n");
return -1;
}
es7000_spin(MIP_SPIN);
}
status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
mip_reg->off_0x38 &= ~MIP_VALID;
return status;
}
static void es7000_enable_apic_mode(void)
{
struct mip_reg es7000_mip_reg;
int mip_status;
if (!es7000_plat)
return;
pr_info("Enabling APIC mode.\n");
memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
es7000_mip_reg.off_0x00 = MIP_SW_APIC;
es7000_mip_reg.off_0x38 = MIP_VALID;
while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
WARN(1, "Command failed, status = %x\n", mip_status);
}
static void es7000_wait_for_init_deassert(atomic_t *deassert)
{
while (!atomic_read(deassert))
cpu_relax();
}
static unsigned int es7000_get_apic_id(unsigned long x)
{
return (x >> 24) & 0xFF;
}
static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_phys(mask, vector);
}
static void es7000_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
}
static void es7000_send_IPI_all(int vector)
{
es7000_send_IPI_mask(cpu_online_mask, vector);
}
static int es7000_apic_id_registered(void)
{
return 1;
}
static const struct cpumask *target_cpus_cluster(void)
{
return cpu_all_mask;
}
static const struct cpumask *es7000_target_cpus(void)
{
return cpumask_of(smp_processor_id());
}
static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid)
{
return 0;
}
static unsigned long es7000_check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
static int es7000_early_logical_apicid(int cpu)
{
/* on es7000, logical apicid is the same as physical */
return early_per_cpu(x86_bios_cpu_apicid, cpu);
}
static unsigned long calculate_ldr(int cpu)
{
unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
return SET_APIC_LOGICAL_ID(id);
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LdR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
static void es7000_init_apic_ldr_cluster(void)
{
unsigned long val;
int cpu = smp_processor_id();
apic_write(APIC_DFR, APIC_DFR_CLUSTER);
val = calculate_ldr(cpu);
apic_write(APIC_LDR, val);
}
static void es7000_init_apic_ldr(void)
{
unsigned long val;
int cpu = smp_processor_id();
apic_write(APIC_DFR, APIC_DFR_FLAT);
val = calculate_ldr(cpu);
apic_write(APIC_LDR, val);
}
static void es7000_setup_apic_routing(void)
{
int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
(apic_version[apic] == 0x14) ?
"Physical Cluster" : "Logical Cluster",
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
static int es7000_cpu_present_to_apicid(int mps_cpu)
{
if (!mps_cpu)
return boot_cpu_physical_apicid;
else if (mps_cpu < nr_cpu_ids)
return per_cpu(x86_bios_cpu_apicid, mps_cpu);
else
return BAD_APICID;
}
static int cpu_id;
static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
{
physid_set_mask_of_physid(cpu_id, retmap);
++cpu_id;
}
static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
{
/* For clustered we don't have a good way to do this yet - hack */
physids_promote(0xFFL, retmap);
}
static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
{
boot_cpu_physical_apicid = read_apic_id();
return 1;
}
static inline int
es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
{
unsigned int round = 0;
unsigned int cpu, uninitialized_var(apicid);
/*
* The cpus in the mask must all be on the apic cluster.
*/
for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
WARN(1, "Not a valid mask!");
return -EINVAL;
}
apicid |= new_apicid;
round++;
}
if (!round)
return -EINVAL;
*dest_id = apicid;
return 0;
}
static int
es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
const struct cpumask *andmask,
unsigned int *apicid)
{
cpumask_var_t cpumask;
*apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
return 0;
cpumask_and(cpumask, inmask, andmask);
es7000_cpu_mask_to_apicid(cpumask, apicid);
free_cpumask_var(cpumask);
return 0;
}
static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
static int probe_es7000(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
}
static int es7000_mps_ret;
static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem,
char *productid)
{
int ret = 0;
if (mpc->oemptr) {
struct mpc_oemtable *oem_table =
(struct mpc_oemtable *)mpc->oemptr;
if (!strncmp(oem, "UNISYS", 6))
ret = parse_unisys_oem((char *)oem_table);
}
es7000_mps_ret = ret;
return ret && !es7000_apic_is_cluster();
}
static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
char *productid)
{
int ret = es7000_mps_ret;
return ret && es7000_apic_is_cluster();
}
/* We've been warned by a false positive warning.Use __refdata to keep calm. */
static struct apic __refdata apic_es7000_cluster = {
.name = "es7000",
.probe = probe_es7000,
.acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = es7000_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* logical delivery broadcast to all procs: */
.irq_dest_mode = 1,
.target_cpus = target_cpus_cluster,
.disable_esr = 1,
.dest_logical = 0,
.check_apicid_used = es7000_check_apicid_used,
.check_apicid_present = es7000_check_apicid_present,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = es7000_init_apic_ldr_cluster,
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
.setup_apic_routing = es7000_setup_apic_routing,
.multi_timer_check = NULL,
.cpu_present_to_apicid = es7000_cpu_present_to_apicid,
.apicid_to_cpu_present = es7000_apicid_to_cpu_present,
.setup_portio_remap = NULL,
.check_phys_apicid_present = es7000_check_phys_apicid_present,
.enable_apic_mode = es7000_enable_apic_mode,
.phys_pkg_id = es7000_phys_pkg_id,
.mps_oem_check = es7000_mps_oem_check_cluster,
.get_apic_id = es7000_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
.cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
.send_IPI_mask = es7000_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = es7000_send_IPI_allbutself,
.send_IPI_all = es7000_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.wakeup_secondary_cpu = wakeup_secondary_cpu_via_mip,
.trampoline_phys_low = 0x467,
.trampoline_phys_high = 0x469,
.wait_for_init_deassert = NULL,
/* Nothing to do for most platforms, since cleared by the INIT cycle: */
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
};
static struct apic __refdata apic_es7000 = {
.name = "es7000",
.probe = probe_es7000,
.acpi_madt_oem_check = es7000_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = es7000_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
/* phys delivery to target CPUs: */
.irq_dest_mode = 0,
.target_cpus = es7000_target_cpus,
.disable_esr = 1,
.dest_logical = 0,
.check_apicid_used = es7000_check_apicid_used,
.check_apicid_present = es7000_check_apicid_present,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = es7000_init_apic_ldr,
.ioapic_phys_id_map = es7000_ioapic_phys_id_map,
.setup_apic_routing = es7000_setup_apic_routing,
.multi_timer_check = NULL,
.cpu_present_to_apicid = es7000_cpu_present_to_apicid,
.apicid_to_cpu_present = es7000_apicid_to_cpu_present,
.setup_portio_remap = NULL,
.check_phys_apicid_present = es7000_check_phys_apicid_present,
.enable_apic_mode = es7000_enable_apic_mode,
.phys_pkg_id = es7000_phys_pkg_id,
.mps_oem_check = es7000_mps_oem_check,
.get_apic_id = es7000_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
.cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
.send_IPI_mask = es7000_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = es7000_send_IPI_allbutself,
.send_IPI_all = es7000_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.trampoline_phys_low = 0x467,
.trampoline_phys_high = 0x469,
.wait_for_init_deassert = es7000_wait_for_init_deassert,
/* Nothing to do for most platforms, since cleared by the INIT cycle: */
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
};
/*
* Need to check for es7000 followed by es7000_cluster, so this order
* in apic_drivers is important.
*/
apic_drivers(apic_es7000, apic_es7000_cluster);

View File

@@ -0,0 +1,91 @@
/*
* HW NMI watchdog support
*
* started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
*
* Arch specific calls to support NMI watchdog
*
* Bits copied from original nmi.c file
*
*/
#include <asm/apic.h>
#include <asm/nmi.h>
#include <linux/cpumask.h>
#include <linux/kdebug.h>
#include <linux/notifier.h>
#include <linux/kprobes.h>
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/delay.h>
#ifdef CONFIG_HARDLOCKUP_DETECTOR
u64 hw_nmi_get_sample_period(int watchdog_thresh)
{
return (u64)(cpu_khz) * 1000 * watchdog_thresh;
}
#endif
#ifdef arch_trigger_all_cpu_backtrace
/* For reliability, we're prepared to waste bits here. */
static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
/* "in progress" flag of arch_trigger_all_cpu_backtrace */
static unsigned long backtrace_flag;
void arch_trigger_all_cpu_backtrace(void)
{
int i;
if (test_and_set_bit(0, &backtrace_flag))
/*
* If there is already a trigger_all_cpu_backtrace() in progress
* (backtrace_flag == 1), don't output double cpu dump infos.
*/
return;
cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
printk(KERN_INFO "sending NMI to all CPUs:\n");
apic->send_IPI_all(NMI_VECTOR);
/* Wait for up to 10 seconds for all CPUs to do the backtrace */
for (i = 0; i < 10 * 1000; i++) {
if (cpumask_empty(to_cpumask(backtrace_mask)))
break;
mdelay(1);
}
clear_bit(0, &backtrace_flag);
smp_mb__after_clear_bit();
}
static int __kprobes
arch_trigger_all_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs)
{
int cpu;
cpu = smp_processor_id();
if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
arch_spin_lock(&lock);
printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
show_regs(regs);
arch_spin_unlock(&lock);
cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
return NMI_HANDLED;
}
return NMI_DONE;
}
static int __init register_trigger_all_cpu_backtrace(void)
{
register_nmi_handler(NMI_LOCAL, arch_trigger_all_cpu_backtrace_handler,
0, "arch_bt");
return 0;
}
early_initcall(register_trigger_all_cpu_backtrace);
#endif

File diff suppressed because it is too large Load Diff

167
arch/x86/kernel/apic/ipi.c Normal file
View File

@@ -0,0 +1,167 @@
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/cache.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/apic.h>
#include <asm/proto.h>
#include <asm/ipi.h>
void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
{
unsigned long query_cpu;
unsigned long flags;
/*
* Hack. The clustered APIC addressing mode doesn't allow us to send
* to an arbitrary mask, so I do a unicast to each CPU instead.
* - mbligh
*/
local_irq_save(flags);
for_each_cpu(query_cpu, mask) {
__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
query_cpu), vector, APIC_DEST_PHYSICAL);
}
local_irq_restore(flags);
}
void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
int vector)
{
unsigned int this_cpu = smp_processor_id();
unsigned int query_cpu;
unsigned long flags;
/* See Hack comment above */
local_irq_save(flags);
for_each_cpu(query_cpu, mask) {
if (query_cpu == this_cpu)
continue;
__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
query_cpu), vector, APIC_DEST_PHYSICAL);
}
local_irq_restore(flags);
}
#ifdef CONFIG_X86_32
void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
int vector)
{
unsigned long flags;
unsigned int query_cpu;
/*
* Hack. The clustered APIC addressing mode doesn't allow us to send
* to an arbitrary mask, so I do a unicasts to each CPU instead. This
* should be modified to do 1 message per cluster ID - mbligh
*/
local_irq_save(flags);
for_each_cpu(query_cpu, mask)
__default_send_IPI_dest_field(
early_per_cpu(x86_cpu_to_logical_apicid, query_cpu),
vector, apic->dest_logical);
local_irq_restore(flags);
}
void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
int vector)
{
unsigned long flags;
unsigned int query_cpu;
unsigned int this_cpu = smp_processor_id();
/* See Hack comment above */
local_irq_save(flags);
for_each_cpu(query_cpu, mask) {
if (query_cpu == this_cpu)
continue;
__default_send_IPI_dest_field(
early_per_cpu(x86_cpu_to_logical_apicid, query_cpu),
vector, apic->dest_logical);
}
local_irq_restore(flags);
}
/*
* This is only used on smaller machines.
*/
void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
unsigned long flags;
if (!mask)
return;
local_irq_save(flags);
WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
local_irq_restore(flags);
}
void default_send_IPI_allbutself(int vector)
{
/*
* if there are no other CPUs in the system then we get an APIC send
* error if we try to broadcast, thus avoid sending IPIs in this case.
*/
if (!(num_online_cpus() > 1))
return;
__default_local_send_IPI_allbutself(vector);
}
void default_send_IPI_all(int vector)
{
__default_local_send_IPI_all(vector);
}
void default_send_IPI_self(int vector)
{
__default_send_IPI_shortcut(APIC_DEST_SELF, vector, apic->dest_logical);
}
/* must come after the send_IPI functions above for inlining */
static int convert_apicid_to_cpu(int apic_id)
{
int i;
for_each_possible_cpu(i) {
if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
return i;
}
return -1;
}
int safe_smp_processor_id(void)
{
int apicid, cpuid;
if (!cpu_has_apic)
return 0;
apicid = hard_smp_processor_id();
if (apicid == BAD_APICID)
return 0;
cpuid = convert_apicid_to_cpu(apicid);
return cpuid >= 0 ? cpuid : 0;
}
#endif

View File

@@ -0,0 +1,525 @@
/*
* Written by: Patricia Gaughen, IBM Corporation
*
* Copyright (C) 2002, IBM Corp.
* Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <gone@us.ibm.com>
*/
#include <linux/nodemask.h>
#include <linux/topology.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/numa.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <asm/processor.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/numaq.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/ipi.h>
int found_numaq;
/*
* Have to match translation table entries to main table entries by counter
* hence the mpc_record variable .... can't see a less disgusting way of
* doing this ....
*/
struct mpc_trans {
unsigned char mpc_type;
unsigned char trans_len;
unsigned char trans_type;
unsigned char trans_quad;
unsigned char trans_global;
unsigned char trans_local;
unsigned short trans_reserved;
};
static int mpc_record;
static struct mpc_trans *translation_table[MAX_MPC_ENTRY];
int mp_bus_id_to_node[MAX_MP_BUSSES];
int mp_bus_id_to_local[MAX_MP_BUSSES];
int quad_local_to_mp_bus_id[NR_CPUS/4][4];
static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
{
struct eachquadmem *eq = scd->eq + node;
u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
int ret;
node_set(node, numa_nodes_parsed);
ret = numa_add_memblk(node, start, end);
BUG_ON(ret < 0);
}
/*
* Function: smp_dump_qct()
*
* Description: gets memory layout from the quad config table. This
* function also updates numa_nodes_parsed with the nodes (quads) present.
*/
static void __init smp_dump_qct(void)
{
struct sys_cfg_data *scd;
int node;
scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
for_each_node(node) {
if (scd->quads_present31_0 & (1 << node))
numaq_register_node(node, scd);
}
}
void __cpuinit numaq_tsc_disable(void)
{
if (!found_numaq)
return;
if (num_online_nodes() > 1) {
printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
setup_clear_cpu_cap(X86_FEATURE_TSC);
}
}
static void __init numaq_tsc_init(void)
{
numaq_tsc_disable();
}
static inline int generate_logical_apicid(int quad, int phys_apicid)
{
return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
}
/* x86_quirks member */
static int mpc_apic_id(struct mpc_cpu *m)
{
int quad = translation_table[mpc_record]->trans_quad;
int logical_apicid = generate_logical_apicid(quad, m->apicid);
printk(KERN_DEBUG
"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
(m->cpufeature & CPU_MODEL_MASK) >> 4,
m->apicver, quad, logical_apicid);
return logical_apicid;
}
/* x86_quirks member */
static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
{
int quad = translation_table[mpc_record]->trans_quad;
int local = translation_table[mpc_record]->trans_local;
mp_bus_id_to_node[m->busid] = quad;
mp_bus_id_to_local[m->busid] = local;
printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
}
/* x86_quirks member */
static void mpc_oem_pci_bus(struct mpc_bus *m)
{
int quad = translation_table[mpc_record]->trans_quad;
int local = translation_table[mpc_record]->trans_local;
quad_local_to_mp_bus_id[quad][local] = m->busid;
}
/*
* Called from mpparse code.
* mode = 0: prescan
* mode = 1: one mpc entry scanned
*/
static void numaq_mpc_record(unsigned int mode)
{
if (!mode)
mpc_record = 0;
else
mpc_record++;
}
static void __init MP_translation_info(struct mpc_trans *m)
{
printk(KERN_INFO
"Translation: record %d, type %d, quad %d, global %d, local %d\n",
mpc_record, m->trans_type, m->trans_quad, m->trans_global,
m->trans_local);
if (mpc_record >= MAX_MPC_ENTRY)
printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
else
translation_table[mpc_record] = m; /* stash this for later */
if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
node_set_online(m->trans_quad);
}
static int __init mpf_checksum(unsigned char *mp, int len)
{
int sum = 0;
while (len--)
sum += *mp++;
return sum & 0xFF;
}
/*
* Read/parse the MPC oem tables
*/
static void __init smp_read_mpc_oem(struct mpc_table *mpc)
{
struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
int count = sizeof(*oemtable); /* the header size */
unsigned char *oemptr = ((unsigned char *)oemtable) + count;
mpc_record = 0;
printk(KERN_INFO
"Found an OEM MPC table at %8p - parsing it...\n", oemtable);
if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
printk(KERN_WARNING
"SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
oemtable->signature[0], oemtable->signature[1],
oemtable->signature[2], oemtable->signature[3]);
return;
}
if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
return;
}
while (count < oemtable->length) {
switch (*oemptr) {
case MP_TRANSLATION:
{
struct mpc_trans *m = (void *)oemptr;
MP_translation_info(m);
oemptr += sizeof(*m);
count += sizeof(*m);
++mpc_record;
break;
}
default:
printk(KERN_WARNING
"Unrecognised OEM table entry type! - %d\n",
(int)*oemptr);
return;
}
}
}
static __init void early_check_numaq(void)
{
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
early_get_smp_config();
if (found_numaq) {
x86_init.mpparse.mpc_record = numaq_mpc_record;
x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
x86_init.mpparse.mpc_apic_id = mpc_apic_id;
x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
x86_init.timers.tsc_pre_init = numaq_tsc_init;
x86_init.pci.init = pci_numaq_init;
}
}
int __init numaq_numa_init(void)
{
early_check_numaq();
if (!found_numaq)
return -ENOENT;
smp_dump_qct();
return 0;
}
#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static inline unsigned int numaq_get_apic_id(unsigned long x)
{
return (x >> 24) & 0x0F;
}
static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_logical(mask, vector);
}
static inline void numaq_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
}
static inline void numaq_send_IPI_all(int vector)
{
numaq_send_IPI_mask(cpu_online_mask, vector);
}
#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
/*
* Because we use NMIs rather than the INIT-STARTUP sequence to
* bootstrap the CPUs, the APIC may be in a weird state. Kick it:
*/
static inline void numaq_smp_callin_clear_local_apic(void)
{
clear_local_APIC();
}
static inline const struct cpumask *numaq_target_cpus(void)
{
return cpu_all_mask;
}
static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
{
return physid_isset(apicid, *map);
}
static inline unsigned long numaq_check_apicid_present(int bit)
{
return physid_isset(bit, phys_cpu_present_map);
}
static inline int numaq_apic_id_registered(void)
{
return 1;
}
static inline void numaq_init_apic_ldr(void)
{
/* Already done in NUMA-Q firmware */
}
static inline void numaq_setup_apic_routing(void)
{
printk(KERN_INFO
"Enabling APIC mode: NUMA-Q. Using %d I/O APICs\n",
nr_ioapics);
}
/*
* Skip adding the timer int on secondary nodes, which causes
* a small but painful rift in the time-space continuum.
*/
static inline int numaq_multi_timer_check(int apic, int irq)
{
return apic != 0 && irq == 0;
}
static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
{
/* We don't have a good way to do this yet - hack */
return physids_promote(0xFUL, retmap);
}
/*
* Supporting over 60 cpus on NUMA-Q requires a locality-dependent
* cpu to APIC ID relation to properly interact with the intelligent
* mode of the cluster controller.
*/
static inline int numaq_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < 60)
return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
else
return BAD_APICID;
}
static inline int numaq_apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
}
static int numaq_numa_cpu_node(int cpu)
{
int logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (logical_apicid != BAD_APICID)
return numaq_apicid_to_node(logical_apicid);
return NUMA_NO_NODE;
}
static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
{
int node = numaq_apicid_to_node(logical_apicid);
int cpu = __ffs(logical_apicid & 0xf);
physid_set_mask_of_physid(cpu + 4*node, retmap);
}
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
static inline int numaq_check_phys_apicid_present(int phys_apicid)
{
return 1;
}
/*
* We use physical apicids here, not logical, so just return the default
* physical broadcast to stop people from breaking us
*/
static int
numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
const struct cpumask *andmask,
unsigned int *apicid)
{
*apicid = 0x0F;
return 0;
}
/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
static int
numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
else
found_numaq = 1;
return found_numaq;
}
static int probe_numaq(void)
{
/* already know from get_memcfg_numaq() */
return found_numaq;
}
static void numaq_setup_portio_remap(void)
{
int num_quads = num_online_nodes();
if (num_quads <= 1)
return;
printk(KERN_INFO
"Remapping cross-quad port I/O for %d quads\n", num_quads);
xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
printk(KERN_INFO
"xquad_portio vaddr 0x%08lx, len %08lx\n",
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
/* Use __refdata to keep false positive warning calm. */
static struct apic __refdata apic_numaq = {
.name = "NUMAQ",
.probe = probe_numaq,
.acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = numaq_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* physical delivery on LOCAL quad: */
.irq_dest_mode = 0,
.target_cpus = numaq_target_cpus,
.disable_esr = 1,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = numaq_check_apicid_used,
.check_apicid_present = numaq_check_apicid_present,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = numaq_init_apic_ldr,
.ioapic_phys_id_map = numaq_ioapic_phys_id_map,
.setup_apic_routing = numaq_setup_apic_routing,
.multi_timer_check = numaq_multi_timer_check,
.cpu_present_to_apicid = numaq_cpu_present_to_apicid,
.apicid_to_cpu_present = numaq_apicid_to_cpu_present,
.setup_portio_remap = numaq_setup_portio_remap,
.check_phys_apicid_present = numaq_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = numaq_phys_pkg_id,
.mps_oem_check = numaq_mps_oem_check,
.get_apic_id = numaq_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
.cpu_mask_to_apicid_and = numaq_cpu_mask_to_apicid_and,
.send_IPI_mask = numaq_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = numaq_send_IPI_allbutself,
.send_IPI_all = numaq_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi,
.trampoline_phys_low = NUMAQ_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = NUMAQ_TRAMPOLINE_PHYS_HIGH,
/* We don't do anything here because we use NMI's to boot instead */
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = numaq_smp_callin_clear_local_apic,
.inquire_remote_apic = NULL,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
.x86_32_numa_cpu_node = numaq_numa_cpu_node,
};
apic_driver(apic_numaq);

View File

@@ -0,0 +1,259 @@
/*
* Default generic APIC driver. This handles up to 8 CPUs.
*
* Copyright 2003 Andi Kleen, SuSE Labs.
* Subject to the GNU Public License, v.2
*
* Generic x86 APIC driver probe layer.
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
#include <asm/apic.h>
#include <asm/setup.h>
#include <linux/smp.h>
#include <asm/ipi.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/e820.h>
#ifdef CONFIG_HOTPLUG_CPU
#define DEFAULT_SEND_IPI (1)
#else
#define DEFAULT_SEND_IPI (0)
#endif
int no_broadcast = DEFAULT_SEND_IPI;
static __init int no_ipi_broadcast(char *str)
{
get_option(&str, &no_broadcast);
pr_info("Using %s mode\n",
no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
return 1;
}
__setup("no_ipi_broadcast=", no_ipi_broadcast);
static int __init print_ipi_mode(void)
{
pr_info("Using IPI %s mode\n",
no_broadcast ? "No-Shortcut" : "Shortcut");
return 0;
}
late_initcall(print_ipi_mode);
static int default_x86_32_early_logical_apicid(int cpu)
{
return 1 << cpu;
}
static void setup_apic_flat_routing(void)
{
#ifdef CONFIG_X86_IO_APIC
printk(KERN_INFO
"Enabling APIC mode: Flat. Using %d I/O APICs\n",
nr_ioapics);
#endif
}
/* should be called last. */
static int probe_default(void)
{
return 1;
}
static struct apic apic_default = {
.name = "default",
.probe = probe_default,
.acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = default_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* logical delivery broadcast to all CPUs: */
.irq_dest_mode = 1,
.target_cpus = default_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = default_check_apicid_used,
.check_apicid_present = default_check_apicid_present,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = setup_apic_flat_routing,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = physid_set_mask_of_physid,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = default_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = default_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0x0F << 24,
.cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = default_send_IPI_mask_logical,
.send_IPI_mask_allbutself = default_send_IPI_mask_allbutself_logical,
.send_IPI_allbutself = default_send_IPI_allbutself,
.send_IPI_all = default_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = default_wait_for_init_deassert,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = default_x86_32_early_logical_apicid,
};
apic_driver(apic_default);
struct apic *apic = &apic_default;
EXPORT_SYMBOL_GPL(apic);
static int cmdline_apic __initdata;
static int __init parse_apic(char *arg)
{
struct apic **drv;
if (!arg)
return -EINVAL;
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if (!strcmp((*drv)->name, arg)) {
apic = *drv;
cmdline_apic = 1;
return 0;
}
}
/* Parsed again by __setup for debug/verbose */
return 0;
}
early_param("apic", parse_apic);
void __init default_setup_apic_routing(void)
{
int version = apic_version[boot_cpu_physical_apicid];
if (num_possible_cpus() > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(version)) {
def_to_bigsmp = 0;
break;
}
/* If P4 and above fall through */
case X86_VENDOR_AMD:
def_to_bigsmp = 1;
}
}
#ifdef CONFIG_X86_BIGSMP
/*
* This is used to switch to bigsmp mode when
* - There is no apic= option specified by the user
* - generic_apic_probe() has chosen apic_default as the sub_arch
* - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
*/
if (!cmdline_apic && apic == &apic_default)
generic_bigsmp_probe();
#endif
if (apic->setup_apic_routing)
apic->setup_apic_routing();
if (x86_platform.apic_post_init)
x86_platform.apic_post_init();
}
void __init generic_apic_probe(void)
{
if (!cmdline_apic) {
struct apic **drv;
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if ((*drv)->probe()) {
apic = *drv;
break;
}
}
/* Not visible without early console */
if (drv == __apicdrivers_end)
panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
}
/* These functions can switch the APIC even after the initial ->probe() */
int __init
generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
struct apic **drv;
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if (!((*drv)->mps_oem_check))
continue;
if (!(*drv)->mps_oem_check(mpc, oem, productid))
continue;
if (!cmdline_apic) {
apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
return 1;
}
return 0;
}
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
struct apic **drv;
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if (!(*drv)->acpi_madt_oem_check)
continue;
if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
continue;
if (!cmdline_apic) {
apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
return 1;
}
return 0;
}

View File

@@ -0,0 +1,72 @@
/*
* Copyright 2004 James Cleverdon, IBM.
* Subject to the GNU Public License, v.2
*
* Generic APIC sub-arch probe layer.
*
* Hacked for x86-64 by James Cleverdon from i386 architecture code by
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/apic.h>
#include <asm/ipi.h>
#include <asm/setup.h>
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init default_setup_apic_routing(void)
{
struct apic **drv;
enable_IR_x2apic();
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if ((*drv)->probe && (*drv)->probe()) {
if (apic != *drv) {
apic = *drv;
pr_info("Switched APIC routing to %s.\n",
apic->name);
}
break;
}
}
if (x86_platform.apic_post_init)
x86_platform.apic_post_init();
}
/* Same for both flat and physical. */
void apic_send_IPI_self(int vector)
{
__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
struct apic **drv;
for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
if ((*drv)->acpi_madt_oem_check(oem_id, oem_table_id)) {
if (apic != *drv) {
apic = *drv;
pr_info("Setting APIC routing to %s.\n",
apic->name);
}
return 1;
}
}
return 0;
}

View File

@@ -0,0 +1,552 @@
/*
* IBM Summit-Specific Code
*
* Written By: Matthew Dobson, IBM Corporation
*
* Copyright (c) 2003 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <colpatch@us.ibm.com>
*
*/
#define pr_fmt(fmt) "summit: %s: " fmt, __func__
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
/*
* APIC driver for the IBM "Summit" chipset.
*/
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <asm/smp.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <asm/ipi.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <linux/smp.h>
static unsigned summit_get_apic_id(unsigned long x)
{
return (x >> 24) & 0xFF;
}
static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector)
{
default_send_IPI_mask_sequence_logical(mask, vector);
}
static void summit_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
}
static void summit_send_IPI_all(int vector)
{
summit_send_IPI_mask(cpu_online_mask, vector);
}
#include <asm/tsc.h>
extern int use_cyclone;
#ifdef CONFIG_X86_SUMMIT_NUMA
static void setup_summit(void);
#else
static inline void setup_summit(void) {}
#endif
static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
char *productid)
{
if (!strncmp(oem, "IBM ENSW", 8) &&
(!strncmp(productid, "VIGIL SMP", 9)
|| !strncmp(productid, "EXA", 3)
|| !strncmp(productid, "RUTHLESS SMP", 12))){
mark_tsc_unstable("Summit based system");
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
return 1;
}
return 0;
}
/* Hook from generic ACPI tables.c */
static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strncmp(oem_id, "IBM", 3) &&
(!strncmp(oem_table_id, "SERVIGIL", 8)
|| !strncmp(oem_table_id, "EXA", 3))){
mark_tsc_unstable("Summit based system");
use_cyclone = 1; /*enable cyclone-timer*/
setup_summit();
return 1;
}
return 0;
}
struct rio_table_hdr {
unsigned char version; /* Version number of this data structure */
/* Version 3 adds chassis_num & WP_index */
unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
} __attribute__((packed));
struct scal_detail {
unsigned char node_id; /* Scalability Node ID */
unsigned long CBAR; /* Address of 1MB register space */
unsigned char port0node; /* Node ID port connected to: 0xFF=None */
unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port1node; /* Node ID port connected to: 0xFF = None */
unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port2node; /* Node ID port connected to: 0xFF = None */
unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
} __attribute__((packed));
struct rio_detail {
unsigned char node_id; /* RIO Node ID */
unsigned long BBAR; /* Address of 1MB register space */
unsigned char type; /* Type of device */
unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
/* For CYC: Node ID of Twister that owns this CYC */
unsigned char port0node; /* Node ID port connected to: 0xFF=None */
unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char port1node; /* Node ID port connected to: 0xFF=None */
unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
/* For CYC: 0 */
unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
/* = 0 : the XAPIC is not used, ie:*/
/* ints fwded to another XAPIC */
/* Bits1:7 Reserved */
/* For CYC: Bits0:7 Reserved */
unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
/* lower slot numbers/PCI bus numbers */
/* For CYC: No meaning */
unsigned char chassis_num; /* 1 based Chassis number */
/* For LookOut WPEGs this field indicates the */
/* Expansion Chassis #, enumerated from Boot */
/* Node WPEG external port, then Boot Node CYC */
/* external port, then Next Vigil chassis WPEG */
/* external port, etc. */
/* Shared Lookouts have only 1 chassis number (the */
/* first one assigned) */
} __attribute__((packed));
typedef enum {
CompatTwister = 0, /* Compatibility Twister */
AltTwister = 1, /* Alternate Twister of internal 8-way */
CompatCyclone = 2, /* Compatibility Cyclone */
AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
CompatWPEG = 4, /* Compatibility WPEG */
AltWPEG = 5, /* Second Planar WPEG */
LookOutAWPEG = 6, /* LookOut WPEG */
LookOutBWPEG = 7, /* LookOut WPEG */
} node_type;
static inline int is_WPEG(struct rio_detail *rio){
return (rio->type == CompatWPEG || rio->type == AltWPEG ||
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static const struct cpumask *summit_target_cpus(void)
{
/* CPU_MASK_ALL (0xff) has undefined behaviour with
* dest_LowestPrio mode logical clustered apic interrupt routing
* Just start on cpu 0. IRQ balancing will spread load
*/
return cpumask_of(0);
}
static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
{
return 0;
}
/* we don't use the phys_cpu_present_map to indicate apicid presence */
static unsigned long summit_check_apicid_present(int bit)
{
return 1;
}
static int summit_early_logical_apicid(int cpu)
{
int count = 0;
u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu);
u8 my_cluster = APIC_CLUSTER(my_id);
#ifdef CONFIG_SMP
u8 lid;
int i;
/* Create logical APIC IDs by counting CPUs already in cluster. */
for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
lid = early_per_cpu(x86_cpu_to_logical_apicid, i);
if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
++count;
}
#endif
/* We only have a 4 wide bitmap in cluster mode. If a deranged
* BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
return my_cluster | (1UL << count);
}
static void summit_init_apic_ldr(void)
{
int cpu = smp_processor_id();
unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
unsigned long val;
apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
val |= SET_APIC_LOGICAL_ID(id);
apic_write(APIC_LDR, val);
}
static int summit_apic_id_registered(void)
{
return 1;
}
static void summit_setup_apic_routing(void)
{
pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
}
static int summit_cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < nr_cpu_ids)
return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
else
return BAD_APICID;
}
static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
{
/* For clustered we don't have a good way to do this yet - hack */
physids_promote(0x0FL, retmap);
}
static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
{
physid_set_mask_of_physid(0, retmap);
}
static int summit_check_phys_apicid_present(int physical_apicid)
{
return 1;
}
static inline int
summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
{
unsigned int round = 0;
unsigned int cpu, apicid = 0;
/*
* The cpus in the mask must all be on the apic cluster.
*/
for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
pr_err("Not a valid mask!\n");
return -EINVAL;
}
apicid |= new_apicid;
round++;
}
if (!round)
return -EINVAL;
*dest_id = apicid;
return 0;
}
static int
summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
const struct cpumask *andmask,
unsigned int *apicid)
{
cpumask_var_t cpumask;
*apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
return 0;
cpumask_and(cpumask, inmask, andmask);
summit_cpu_mask_to_apicid(cpumask, apicid);
free_cpumask_var(cpumask);
return 0;
}
/*
* cpuid returns the value latched in the HW at reset, not the APIC ID
* register's value. For any box whose BIOS changes APIC IDs, like
* clustered APIC systems, we must use hard_smp_processor_id.
*
* See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
*/
static int summit_phys_pkg_id(int cpuid_apic, int index_msb)
{
return hard_smp_processor_id() >> index_msb;
}
static int probe_summit(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
}
#ifdef CONFIG_X86_SUMMIT_NUMA
static struct rio_table_hdr *rio_table_hdr;
static struct scal_detail *scal_devs[MAX_NUMNODES];
static struct rio_detail *rio_devs[MAX_NUMNODES*4];
#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES];
#endif
static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
int twister = 0, node = 0;
int i, bus, num_buses;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
twister = rio_devs[i]->owner_id;
break;
}
}
if (i == rio_table_hdr->num_rio_dev) {
pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
return last_bus;
}
for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
if (scal_devs[i]->node_id == twister) {
node = scal_devs[i]->node_id;
break;
}
}
if (i == rio_table_hdr->num_scal_dev) {
pr_err("Couldn't find owner Twister for Cyclone!\n");
return last_bus;
}
switch (rio_devs[wpeg_num]->type) {
case CompatWPEG:
/*
* The Compatibility Winnipeg controls the 2 legacy buses,
* the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
* a PCI-PCI bridge card is used in either slot: total 5 buses.
*/
num_buses = 5;
break;
case AltWPEG:
/*
* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
* each], their 2 "extra" buses, the 100MHz bus [2 slots] and
* the "extra" buses for each of those slots: total 7 buses.
*/
num_buses = 7;
break;
case LookOutAWPEG:
case LookOutBWPEG:
/*
* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
* & the "extra" buses for each of those slots: total 9 buses.
*/
num_buses = 9;
break;
default:
pr_info("Unsupported Winnipeg type!\n");
return last_bus;
}
for (bus = last_bus; bus < last_bus + num_buses; bus++)
mp_bus_id_to_node[bus] = node;
return bus;
}
static int build_detail_arrays(void)
{
unsigned long ptr;
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n",
MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
pr_warn("Invalid Rio Grande Table Version: %d\n",
rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
rio_detail_size = 13;
break;
case 3:
scal_detail_size = 12;
rio_detail_size = 15;
break;
}
ptr = (unsigned long)rio_table_hdr + 3;
for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
rio_devs[i] = (struct rio_detail *)ptr;
return 1;
}
void setup_summit(void)
{
unsigned long ptr;
unsigned short offset;
int i, next_wpeg, next_bus = 0;
/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
ptr = get_bios_ebda();
ptr = (unsigned long)phys_to_virt(ptr);
rio_table_hdr = NULL;
offset = 0x180;
while (offset) {
/* The block id is stored in the 2nd word */
if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
}
/* The next offset is stored in the 1st word. 0 means no more */
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
return;
}
if (!build_detail_arrays())
return;
/* The first Winnipeg we're looking for has an index of 0 */
next_wpeg = 0;
do {
for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
/* It's the Winnipeg we're looking for! */
next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
next_wpeg++;
break;
}
}
/*
* If we go through all Rio devices and don't find one with
* the next index, it means we've found all the Winnipegs,
* and thus all the PCI buses.
*/
if (i == rio_table_hdr->num_rio_dev)
next_wpeg = 0;
} while (next_wpeg != 0);
}
#endif
static struct apic apic_summit = {
.name = "summit",
.probe = probe_summit,
.acpi_madt_oem_check = summit_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = summit_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
/* logical delivery broadcast to all CPUs: */
.irq_dest_mode = 1,
.target_cpus = summit_target_cpus,
.disable_esr = 1,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = summit_check_apicid_used,
.check_apicid_present = summit_check_apicid_present,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = summit_init_apic_ldr,
.ioapic_phys_id_map = summit_ioapic_phys_id_map,
.setup_apic_routing = summit_setup_apic_routing,
.multi_timer_check = NULL,
.cpu_present_to_apicid = summit_cpu_present_to_apicid,
.apicid_to_cpu_present = summit_apicid_to_cpu_present,
.setup_portio_remap = NULL,
.check_phys_apicid_present = summit_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = summit_phys_pkg_id,
.mps_oem_check = summit_mps_oem_check,
.get_apic_id = summit_get_apic_id,
.set_apic_id = NULL,
.apic_id_mask = 0xFF << 24,
.cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
.send_IPI_mask = summit_send_IPI_mask,
.send_IPI_mask_allbutself = NULL,
.send_IPI_allbutself = summit_send_IPI_allbutself,
.send_IPI_all = summit_send_IPI_all,
.send_IPI_self = default_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = default_wait_for_init_deassert,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = summit_early_logical_apicid,
};
apic_driver(apic_summit);

View File

@@ -0,0 +1,296 @@
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/dmar.h>
#include <linux/cpu.h>
#include <asm/smp.h>
#include <asm/x2apic.h>
static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
static DEFINE_PER_CPU(cpumask_var_t, cpus_in_cluster);
static DEFINE_PER_CPU(cpumask_var_t, ipi_mask);
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return x2apic_enabled();
}
static inline u32 x2apic_cluster(int cpu)
{
return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
}
static void
__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
{
struct cpumask *cpus_in_cluster_ptr;
struct cpumask *ipi_mask_ptr;
unsigned int cpu, this_cpu;
unsigned long flags;
u32 dest;
x2apic_wrmsr_fence();
local_irq_save(flags);
this_cpu = smp_processor_id();
/*
* We are to modify mask, so we need an own copy
* and be sure it's manipulated with irq off.
*/
ipi_mask_ptr = __raw_get_cpu_var(ipi_mask);
cpumask_copy(ipi_mask_ptr, mask);
/*
* The idea is to send one IPI per cluster.
*/
for_each_cpu(cpu, ipi_mask_ptr) {
unsigned long i;
cpus_in_cluster_ptr = per_cpu(cpus_in_cluster, cpu);
dest = 0;
/* Collect cpus in cluster. */
for_each_cpu_and(i, ipi_mask_ptr, cpus_in_cluster_ptr) {
if (apic_dest == APIC_DEST_ALLINC || i != this_cpu)
dest |= per_cpu(x86_cpu_to_logical_apicid, i);
}
if (!dest)
continue;
__x2apic_send_IPI_dest(dest, vector, apic->dest_logical);
/*
* Cluster sibling cpus should be discared now so
* we would not send IPI them second time.
*/
cpumask_andnot(ipi_mask_ptr, ipi_mask_ptr, cpus_in_cluster_ptr);
}
local_irq_restore(flags);
}
static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
{
__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
}
static void
x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
{
__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
}
static void x2apic_send_IPI_allbutself(int vector)
{
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
}
static void x2apic_send_IPI_all(int vector)
{
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
}
static int
x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
const struct cpumask *andmask,
unsigned int *apicid)
{
u32 dest = 0;
u16 cluster;
int i;
for_each_cpu_and(i, cpumask, andmask) {
if (!cpumask_test_cpu(i, cpu_online_mask))
continue;
dest = per_cpu(x86_cpu_to_logical_apicid, i);
cluster = x2apic_cluster(i);
break;
}
if (!dest)
return -EINVAL;
for_each_cpu_and(i, cpumask, andmask) {
if (!cpumask_test_cpu(i, cpu_online_mask))
continue;
if (cluster != x2apic_cluster(i))
continue;
dest |= per_cpu(x86_cpu_to_logical_apicid, i);
}
*apicid = dest;
return 0;
}
static void init_x2apic_ldr(void)
{
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
per_cpu(x86_cpu_to_logical_apicid, this_cpu) = apic_read(APIC_LDR);
__cpu_set(this_cpu, per_cpu(cpus_in_cluster, this_cpu));
for_each_online_cpu(cpu) {
if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
continue;
__cpu_set(this_cpu, per_cpu(cpus_in_cluster, cpu));
__cpu_set(cpu, per_cpu(cpus_in_cluster, this_cpu));
}
}
/*
* At CPU state changes, update the x2apic cluster sibling info.
*/
static int __cpuinit
update_clusterinfo(struct notifier_block *nfb, unsigned long action, void *hcpu)
{
unsigned int this_cpu = (unsigned long)hcpu;
unsigned int cpu;
int err = 0;
switch (action) {
case CPU_UP_PREPARE:
if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, this_cpu),
GFP_KERNEL)) {
err = -ENOMEM;
} else if (!zalloc_cpumask_var(&per_cpu(ipi_mask, this_cpu),
GFP_KERNEL)) {
free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
err = -ENOMEM;
}
break;
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
case CPU_DEAD:
for_each_online_cpu(cpu) {
if (x2apic_cluster(this_cpu) != x2apic_cluster(cpu))
continue;
__cpu_clear(this_cpu, per_cpu(cpus_in_cluster, cpu));
__cpu_clear(cpu, per_cpu(cpus_in_cluster, this_cpu));
}
free_cpumask_var(per_cpu(cpus_in_cluster, this_cpu));
free_cpumask_var(per_cpu(ipi_mask, this_cpu));
break;
}
return notifier_from_errno(err);
}
static struct notifier_block __refdata x2apic_cpu_notifier = {
.notifier_call = update_clusterinfo,
};
static int x2apic_init_cpu_notifier(void)
{
int cpu = smp_processor_id();
zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL);
zalloc_cpumask_var(&per_cpu(ipi_mask, cpu), GFP_KERNEL);
BUG_ON(!per_cpu(cpus_in_cluster, cpu) || !per_cpu(ipi_mask, cpu));
__cpu_set(cpu, per_cpu(cpus_in_cluster, cpu));
register_hotcpu_notifier(&x2apic_cpu_notifier);
return 1;
}
static int x2apic_cluster_probe(void)
{
if (x2apic_mode)
return x2apic_init_cpu_notifier();
else
return 0;
}
static const struct cpumask *x2apic_cluster_target_cpus(void)
{
return cpu_all_mask;
}
/*
* Each x2apic cluster is an allocation domain.
*/
static void cluster_vector_allocation_domain(int cpu, struct cpumask *retmask,
const struct cpumask *mask)
{
/*
* To minimize vector pressure, default case of boot, device bringup
* etc will use a single cpu for the interrupt destination.
*
* On explicit migration requests coming from irqbalance etc,
* interrupts will be routed to the x2apic cluster (cluster-id
* derived from the first cpu in the mask) members specified
* in the mask.
*/
if (mask == x2apic_cluster_target_cpus())
cpumask_copy(retmask, cpumask_of(cpu));
else
cpumask_and(retmask, mask, per_cpu(cpus_in_cluster, cpu));
}
static struct apic apic_x2apic_cluster = {
.name = "cluster x2apic",
.probe = x2apic_cluster_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = x2apic_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
.irq_dest_mode = 1, /* logical */
.target_cpus = x2apic_cluster_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = cluster_vector_allocation_domain,
.init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = x2apic_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = x2apic_get_apic_id,
.set_apic_id = x2apic_set_apic_id,
.apic_id_mask = 0xFFFFFFFFu,
.cpu_mask_to_apicid_and = x2apic_cpu_mask_to_apicid_and,
.send_IPI_mask = x2apic_send_IPI_mask,
.send_IPI_mask_allbutself = x2apic_send_IPI_mask_allbutself,
.send_IPI_allbutself = x2apic_send_IPI_allbutself,
.send_IPI_all = x2apic_send_IPI_all,
.send_IPI_self = x2apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = NULL,
.read = native_apic_msr_read,
.write = native_apic_msr_write,
.eoi_write = native_apic_msr_eoi_write,
.icr_read = native_x2apic_icr_read,
.icr_write = native_x2apic_icr_write,
.wait_icr_idle = native_x2apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_x2apic_wait_icr_idle,
};
apic_driver(apic_x2apic_cluster);

View File

@@ -0,0 +1,150 @@
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/x2apic.h>
int x2apic_phys;
static struct apic apic_x2apic_phys;
static int set_x2apic_phys_mode(char *arg)
{
x2apic_phys = 1;
return 0;
}
early_param("x2apic_phys", set_x2apic_phys_mode);
static bool x2apic_fadt_phys(void)
{
if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "System requires x2apic physical mode\n");
return true;
}
return false;
}
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
static void
__x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
{
unsigned long query_cpu;
unsigned long this_cpu;
unsigned long flags;
x2apic_wrmsr_fence();
local_irq_save(flags);
this_cpu = smp_processor_id();
for_each_cpu(query_cpu, mask) {
if (apic_dest == APIC_DEST_ALLBUT && this_cpu == query_cpu)
continue;
__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
vector, APIC_DEST_PHYSICAL);
}
local_irq_restore(flags);
}
static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
{
__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLINC);
}
static void
x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
{
__x2apic_send_IPI_mask(mask, vector, APIC_DEST_ALLBUT);
}
static void x2apic_send_IPI_allbutself(int vector)
{
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLBUT);
}
static void x2apic_send_IPI_all(int vector)
{
__x2apic_send_IPI_mask(cpu_online_mask, vector, APIC_DEST_ALLINC);
}
static void init_x2apic_ldr(void)
{
}
static int x2apic_phys_probe(void)
{
if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
return 1;
return apic == &apic_x2apic_phys;
}
static struct apic apic_x2apic_phys = {
.name = "physical x2apic",
.probe = x2apic_phys_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = x2apic_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = default_vector_allocation_domain,
.init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = x2apic_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = x2apic_get_apic_id,
.set_apic_id = x2apic_set_apic_id,
.apic_id_mask = 0xFFFFFFFFu,
.cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = x2apic_send_IPI_mask,
.send_IPI_mask_allbutself = x2apic_send_IPI_mask_allbutself,
.send_IPI_allbutself = x2apic_send_IPI_allbutself,
.send_IPI_all = x2apic_send_IPI_all,
.send_IPI_self = x2apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = NULL,
.read = native_apic_msr_read,
.write = native_apic_msr_write,
.eoi_write = native_apic_msr_eoi_write,
.icr_read = native_x2apic_icr_read,
.icr_write = native_x2apic_icr_write,
.wait_icr_idle = native_x2apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_x2apic_wait_icr_idle,
};
apic_driver(apic_x2apic_phys);

File diff suppressed because it is too large Load Diff