Initial commit; kernel source import

arch/arm/plat-samsung/Kconfig

@@ -0,0 +1,498 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+	bool
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
+	default y
+	select GENERIC_IRQ_CHIP
+	select NO_IOPORT
+	help
+	  Base platform code for all Samsung SoC based systems
+
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	default y
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC if ARCH_EXYNOS
+	select ARM_VIC if !ARCH_EXYNOS
+	select GIC_NON_BANKED if ARCH_EXYNOS4
+	select NO_IOPORT
+	select PLAT_SAMSUNG
+	select S3C_GPIO_TRACK
+	select S5P_GPIO_DRVSTR
+	select SAMSUNG_CLKSRC if !COMMON_CLK
+	select SAMSUNG_GPIOLIB_4BIT
+	select SAMSUNG_IRQ_VIC_TIMER
+	help
+	  Base platform code for Samsung's S5P series SoC.
+
+if PLAT_SAMSUNG
+
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_ERROR_RESET
+	bool "S3C Reboot on decompression error"
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+# timer options
+
+config SAMSUNG_HRT
+	bool
+	select SAMSUNG_DEV_PWM
+	help
+	  Use the High Resolution timer support
+
+# clock options
+
+config SAMSUNG_CLOCK
+	bool
+	default y if !COMMON_CLK
+
+config SAMSUNG_CLKSRC
+	bool
+	help
+	  Select the clock code for the clksrc implementation
+	  used by newer systems such as the S3C64XX.
+
+config S5P_CLOCK
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+	help
+	  Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
+
+# options for IRQ support
+
+config SAMSUNG_IRQ_VIC_TIMER
+       bool
+       help
+         Internal configuration to build the VIC timer interrupt code.
+
+config S5P_IRQ
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+	help
+	  Support common interrupt part for ARCH_S5P SoCs
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+	bool
+	help
+	  Common code for the GPIO interrupts (other than external interrupts.)
+
+# options for gpio configuration support
+
+config SAMSUNG_GPIOLIB_4BIT
+	bool
+	help
+	  GPIOlib file contains the 4 bit modification functions for gpio
+	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
+	  series of processors.
+
+config S5P_GPIO_DRVSTR
+	bool
+	help
+	  Internal configuration to get and set correct GPIO driver strength
+	  helper
+
+config SAMSUNG_GPIO_EXTRA
+	int "Number of additional GPIO pins"
+	default 128 if SAMSUNG_GPIO_EXTRA128
+	default 64 if SAMSUNG_GPIO_EXTRA64
+	default 0
+	help
+	  Use additional GPIO space in addition to the GPIO's the SOC
+	  provides. This allows expanding the GPIO space for use with
+	  GPIO expanders.
+
+config SAMSUNG_GPIO_EXTRA64
+	bool
+
+config SAMSUNG_GPIO_EXTRA128
+	bool
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+# uart options
+
+config S5P_DEV_UART
+	def_bool y
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
+# ADC driver
+
+config S3C_ADC
+	bool "ADC common driver support"
+	help
+	  Core support for the ADC block found in the Samsung SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_HSMMC3
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 3
+
+config S3C_DEV_HWMON
+	bool
+	help
+	    Compile in platform device definitions for HWMON
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_I2C2
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 2
+
+config S3C_DEV_I2C3
+	bool
+	help
+	  Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+	bool
+	help
+	  Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+	bool
+	help
+	  Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+	bool
+	help
+	  Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+	bool
+	help
+	  Compile in platform device definition for I2C controller 7
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_WDT
+	bool
+	default y if ARCH_S3C24XX
+	help
+	  Complie in platform device definition for Watchdog Timer
+
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
+config S3C_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+	bool
+	help
+	  Complie in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+	bool
+	help
+	  Compile in platform device definition for ADC controller
+
+config SAMSUNG_DEV_IDE
+	bool
+	help
+	  Compile in platform device definitions for IDE
+
+config S3C64XX_DEV_SPI0
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 0
+
+config S3C64XX_DEV_SPI1
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 1
+
+config S3C64XX_DEV_SPI2
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 2
+
+config SAMSUNG_DEV_TS
+	bool
+	help
+	    Common in platform device definitions for touchscreen device
+
+config SAMSUNG_DEV_KEYPAD
+	bool
+	help
+	  Compile in platform device definitions for keypad
+
+config SAMSUNG_DEV_PWM
+	bool
+	default y if ARCH_S3C24XX
+	help
+	  Compile in platform device definition for PWM Timer
+
+config SAMSUNG_DEV_BACKLIGHT
+	bool
+	depends on SAMSUNG_DEV_PWM
+	help
+	  Compile in platform device definition LCD backlight with PWM Timer
+
+config S5P_DEV_CSIS0
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 0
+
+config S5P_DEV_CSIS1
+	bool
+	help
+	  Compile in platform device definitions for MIPI-CSIS channel 1
+
+config S5P_DEV_FIMC0
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_FIMC3
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 3
+
+config S5P_DEV_FIMD0
+	bool
+	help
+	  Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_G2D
+	bool
+	help
+	  Compile in platform device definitions for G2D device
+
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
+config S5P_DEV_JPEG
+	bool
+	help
+	  Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
+config S5P_DEV_USB_EHCI
+	bool
+	help
+	  Compile in platform device definition for USB EHCI
+
+config S3C24XX_PWM
+	bool "PWM device support"
+	select PWM
+	select PWM_SAMSUNG
+	help
+	  Support for exporting the PWM timer blocks via the pwm device
+	  system
+
+config S5P_SETUP_MIPIPHY
+	bool
+	help
+	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
+
+config S3C_SETUP_CAMIF
+	bool
+	help
+	  Compile in common setup code for S3C CAMIF devices
+
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
+config SAMSUNG_DMADEV
+	bool
+	select ARM_AMBA
+	select DMADEVICES
+	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
+					CPU_S5P6450 || CPU_S5P6440)
+	help
+	  Use DMA device engine for PL330 DMAC.
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on PM
+	select DEBUG_LL
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_WAKEMASK
+	bool
+	depends on PM
+	help
+	  Compile support for wakeup-mask controls found on the S3C6400
+	  and above. This code allows a set of interrupt to wakeup-mask
+	  mappings. See <plat/wakeup-mask.h>
+
+config S5P_PM
+	bool
+	help
+	  Common code for power management support on S5P and newer SoCs
+	  Note: Do not select this for S5P6440 and S5P6450.
+
+config S5P_SLEEP
+	bool
+	help
+	  Internal config node to apply common S5P sleep management code.
+	  Can be selected by S5P and newer SoCs with similar sleep procedure.
+
+config DEBUG_S3C_UART
+	depends on PLAT_SAMSUNG
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
+endif

arch/arm/plat-samsung/Makefile

@@ -0,0 +1,61 @@
+# arch/arm/plat-samsung/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Objects we always build independent of SoC choice
+
+obj-y				+= init.o cpu.o
+obj-$(CONFIG_SAMSUNG_HRT) 	+= samsung-time.o
+
+obj-$(CONFIG_SAMSUNG_CLOCK)	+= clock.o
+obj-$(CONFIG_SAMSUNG_CLOCK)	+= pwm-clock.o
+
+obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK)		+= s5p-clock.o
+
+obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC)	+= adc.o
+
+# devices
+
+obj-y				+= platformdata.o
+
+obj-y				+= devs.o
+obj-y				+= dev-uart.o
+obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
+
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
+
+obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
+obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
+
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
+
+obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
+
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
+
+obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
+
+obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o

arch/arm/plat-samsung/adc.c

@@ -0,0 +1,526 @@
+/* arch/arm/plat-samsung/adc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * Samsung ADC device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+enum s3c_cpu_type {
+	TYPE_ADCV1, /* S3C24XX */
+	TYPE_ADCV11, /* S3C2443 */
+	TYPE_ADCV12, /* S3C2416, S3C2450 */
+	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
+	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
+};
+
+struct s3c_adc_client {
+	struct platform_device	*pdev;
+	struct list_head	 pend;
+	wait_queue_head_t	*wait;
+
+	unsigned int		 nr_samples;
+	int			 result;
+	unsigned char		 is_ts;
+	unsigned char		 channel;
+
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
+			      unsigned *samples_left);
+};
+
+struct adc_device {
+	struct platform_device	*pdev;
+	struct platform_device	*owner;
+	struct clk		*clk;
+	struct s3c_adc_client	*cur;
+	struct s3c_adc_client	*ts_pend;
+	void __iomem		*regs;
+	spinlock_t		 lock;
+
+	unsigned int		 prescale;
+
+	int			 irq;
+	struct regulator	*vdd;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	con |= S3C2410_ADCCON_ENABLE_START;
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+				  struct s3c_adc_client *client)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+
+	client->select_cb(client, 1);
+
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
+		con &= ~S3C2410_ADCCON_MUXMASK;
+	con &= ~S3C2410_ADCCON_STDBM;
+	con &= ~S3C2410_ADCCON_STARTMASK;
+
+	if (!client->is_ts) {
+		if (cpu == TYPE_ADCV3)
+			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
+			writel(client->channel & 0xf,
+						adc->regs + S3C2443_ADCMUX);
+		else
+			con |= S3C2410_ADCCON_SELMUX(client->channel);
+	}
+
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+		readl(adc->regs + S3C2410_ADCCON),
+		readl(adc->regs + S3C2410_ADCTSC),
+		readl(adc->regs + S3C2410_ADCDLY));
+}
+
+static void s3c_adc_try(struct adc_device *adc)
+{
+	struct s3c_adc_client *next = adc->ts_pend;
+
+	if (!next && !list_empty(&adc_pending)) {
+		next = list_first_entry(&adc_pending,
+					struct s3c_adc_client, pend);
+		list_del(&next->pend);
+	} else
+		adc->ts_pend = NULL;
+
+	if (next) {
+		adc_dbg(adc, "new client is %p\n", next);
+		adc->cur = next;
+		s3c_adc_select(adc, next);
+		s3c_adc_convert(adc);
+		s3c_adc_dbgshow(adc);
+	}
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+		  unsigned int channel, unsigned int nr_samples)
+{
+	struct adc_device *adc = adc_dev;
+	unsigned long flags;
+
+	if (!adc) {
+		printk(KERN_ERR "%s: failed to find adc\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	if (client->is_ts && adc->ts_pend) {
+		spin_unlock_irqrestore(&adc->lock, flags);
+		return -EAGAIN;
+	}
+
+	client->channel = channel;
+	client->nr_samples = nr_samples;
+
+	if (client->is_ts)
+		adc->ts_pend = client;
+	else
+		list_add_tail(&client->pend, &adc_pending);
+
+	if (!adc->cur)
+		s3c_adc_try(adc);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_read);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
+						     unsigned *samples_left),
+					unsigned int is_ts)
+{
+	struct s3c_adc_client *client;
+
+	WARN_ON(!pdev);
+
+	if (!select)
+		select = s3c_adc_default_select;
+
+	if (!pdev)
+		return ERR_PTR(-EINVAL);
+
+	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
+	if (!client) {
+		dev_err(&pdev->dev, "no memory for adc client\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	client->pdev = pdev;
+	client->is_ts = is_ts;
+	client->select_cb = select;
+	client->convert_cb = conv;
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc_dev->lock, flags);
+
+	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
+
+	spin_unlock_irqrestore(&adc_dev->lock, flags);
+	kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+	struct adc_device *adc = pw;
+	struct s3c_adc_client *client = adc->cur;
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+	unsigned data0, data1;
+
+	if (!client) {
+		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+		goto exit;
+	}
+
+	data0 = readl(adc->regs + S3C2410_ADCDAT0);
+	data1 = readl(adc->regs + S3C2410_ADCDAT1);
+	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+	client->nr_samples--;
+
+	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	} else {
+		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
+	}
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0, data1, &client->nr_samples);
+
+	if (client->nr_samples > 0) {
+		/* fire another conversion for this */
+
+		client->select_cb(client, 1);
+		s3c_adc_convert(adc);
+	} else {
+		spin_lock(&adc->lock);
+		(client->select_cb)(client, 0);
+		adc->cur = NULL;
+
+		s3c_adc_try(adc);
+		spin_unlock(&adc->lock);
+	}
+
+exit:
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
+		/* Clear ADC interrupt */
+		writel(0, adc->regs + S3C64XX_ADCCLRINT);
+	}
+	return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_device *adc;
+	struct resource *regs;
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+	int ret;
+	unsigned tmp;
+
+	adc = devm_kzalloc(dev, sizeof(struct adc_device), GFP_KERNEL);
+	if (adc == NULL) {
+		dev_err(dev, "failed to allocate adc_device\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&adc->lock);
+
+	adc->pdev = pdev;
+	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+	adc->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(adc->vdd)) {
+		dev_err(dev, "operating without regulator \"vdd\" .\n");
+		return PTR_ERR(adc->vdd);
+	}
+
+	adc->irq = platform_get_irq(pdev, 1);
+	if (adc->irq <= 0) {
+		dev_err(dev, "failed to get adc irq\n");
+		return -ENOENT;
+	}
+
+	ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
+				adc);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach adc irq\n");
+		return ret;
+	}
+
+	adc->clk = devm_clk_get(dev, "adc");
+	if (IS_ERR(adc->clk)) {
+		dev_err(dev, "failed to get adc clock\n");
+		return PTR_ERR(adc->clk);
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adc->regs = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(adc->regs))
+		return PTR_ERR(adc->regs);
+
+	ret = regulator_enable(adc->vdd);
+	if (ret)
+		return ret;
+
+	clk_enable(adc->clk);
+
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+		tmp |= S3C64XX_ADCCON_RESSEL;
+
+	writel(tmp, adc->regs + S3C2410_ADCCON);
+
+	dev_info(dev, "attached adc driver\n");
+
+	platform_set_drvdata(pdev, adc);
+	adc_dev = adc;
+
+	return 0;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+
+	clk_disable(adc->clk);
+	regulator_disable(adc->vdd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+			struct platform_device, dev);
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u32 con;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	con = readl(adc->regs + S3C2410_ADCCON);
+	con |= S3C2410_ADCCON_STDBM;
+	writel(con, adc->regs + S3C2410_ADCCON);
+
+	disable_irq(adc->irq);
+	spin_unlock_irqrestore(&adc->lock, flags);
+	clk_disable(adc->clk);
+	regulator_disable(adc->vdd);
+
+	return 0;
+}
+
+static int s3c_adc_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+			struct platform_device, dev);
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
+	int ret;
+	unsigned long tmp;
+
+	ret = regulator_enable(adc->vdd);
+	if (ret)
+		return ret;
+	clk_enable(adc->clk);
+	enable_irq(adc->irq);
+
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+
+	/* Enable 12-bit ADC resolution */
+	if (cpu == TYPE_ADCV12)
+		tmp |= S3C2416_ADCCON_RESSEL;
+	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
+		tmp |= S3C64XX_ADCCON_RESSEL;
+
+	writel(tmp, adc->regs + S3C2410_ADCCON);
+
+	return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static struct platform_device_id s3c_adc_driver_ids[] = {
+	{
+		.name           = "s3c24xx-adc",
+		.driver_data    = TYPE_ADCV1,
+	}, {
+		.name		= "s3c2443-adc",
+		.driver_data	= TYPE_ADCV11,
+	}, {
+		.name		= "s3c2416-adc",
+		.driver_data	= TYPE_ADCV12,
+	}, {
+		.name           = "s3c64xx-adc",
+		.driver_data    = TYPE_ADCV2,
+	}, {
+		.name		= "samsung-adc-v3",
+		.driver_data	= TYPE_ADCV3,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
+static const struct dev_pm_ops adc_pm_ops = {
+	.suspend	= s3c_adc_suspend,
+	.resume		= s3c_adc_resume,
+};
+
+static struct platform_driver s3c_adc_driver = {
+	.id_table	= s3c_adc_driver_ids,
+	.driver		= {
+		.name	= "s3c-adc",
+		.owner	= THIS_MODULE,
+		.pm	= &adc_pm_ops,
+	},
+	.probe		= s3c_adc_probe,
+	.remove		= s3c_adc_remove,
+};
+
+static int __init adc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&s3c_adc_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+	return ret;
+}
+
+module_init(adc_init);

arch/arm/plat-samsung/clock-clksrc.c

@@ -0,0 +1,212 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+	u32 mask = 0xffffffff >> (32 - nr_bits);
+
+	return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+	clkdiv &= mask;
+	clkdiv >>= sclk->reg_div.shift;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_div.reg;
+	unsigned int div;
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > (1 << sclk->reg_div.size))
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~mask;
+	val |= (div - 1) << sclk->reg_div.shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clksrc_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_src.reg);
+	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clk->parent = parent;
+
+		clksrc &= ~mask;
+		clksrc |= src_nr << sclk->reg_src.shift;
+
+		__raw_writel(clksrc, sclk->reg_src.reg);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int max_div = 1 << sclk->reg_div.size;
+	int div;
+
+	if (rate >= parent_rate)
+		rate = parent_rate;
+	else {
+		div = parent_rate / rate;
+		if (parent_rate % rate)
+			div++;
+
+		if (div == 0)
+			div = 1;
+		if (div > max_div)
+			div = max_div;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
+{
+	struct clksrc_sources *srcs = clk->sources;
+	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+	u32 clksrc;
+
+	if (!clk->reg_src.reg) {
+		if (!clk->clk.parent)
+			printk(KERN_ERR "%s: no parent clock specified\n",
+				clk->clk.name);
+		return;
+	}
+
+	clksrc = __raw_readl(clk->reg_src.reg);
+	clksrc &= mask;
+	clksrc >>= clk->reg_src.shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	if (announce)
+		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+		       clk->clk.name, clk->clk.parent->name, clksrc,
+		       clk_get_rate(&clk->clk));
+}
+
+static struct clk_ops clksrc_ops = {
+	.set_parent	= s3c_setparent_clksrc,
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nodiv = {
+	.set_parent	= s3c_setparent_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nosrc = {
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+	int ret;
+
+	for (; size > 0; size--, clksrc++) {
+		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
+			printk(KERN_ERR "%s: clock %s has no registers set\n",
+			       __func__, clksrc->clk.name);
+
+		/* fill in the default functions */
+
+		if (!clksrc->clk.ops) {
+			if (!clksrc->reg_div.reg)
+				clksrc->clk.ops = &clksrc_ops_nodiv;
+			else if (!clksrc->reg_src.reg)
+				clksrc->clk.ops = &clksrc_ops_nosrc;
+			else
+				clksrc->clk.ops = &clksrc_ops;
+		}
+
+		/* setup the clocksource, but do not announce it
+		 * as it may be re-set by the setup routines
+		 * called after the rest of the clocks have been
+		 * registered
+		 */
+		s3c_set_clksrc(clksrc, false);
+
+		ret = s3c24xx_register_clock(&clksrc->clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to register %s (%d)\n",
+			       __func__, clksrc->clk.name, ret);
+		}
+	}
+}

arch/arm/plat-samsung/clock.c

@@ -0,0 +1,540 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#if defined(CONFIG_DEBUG_FS)
+#include <linux/debugfs.h>
+#endif
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+	s3c2410_wdtclk = clk_get(NULL, "watchdog");
+	if (IS_ERR(s3c2410_wdtclk))
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR_OR_NULL(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops != NULL && clk->ops->get_rate != NULL)
+		return (clk->ops->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->round_rate)
+		return (clk->ops->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	int ret;
+
+	if (IS_ERR_OR_NULL(clk))
+		return -EINVAL;
+
+	/* We do not default just do a clk->rate = rate as
+	 * the clock may have been made this way by choice.
+	 */
+
+	WARN_ON(clk->ops == NULL);
+	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
+
+	if (clk->ops == NULL || clk->ops->set_rate == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	ret = (clk->ops->set_rate)(clk, rate);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(clk) || IS_ERR_OR_NULL(parent))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	if (clk->ops && clk->ops->set_parent)
+		ret = (clk->ops->set_parent)(clk, parent);
+
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+struct clk_ops clk_ops_def_setrate = {
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_ext = {
+	.name		= "ext",
+};
+
+struct clk clk_epll = {
+	.name		= "epll",
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+};
+
+/* initialise the clock system */
+
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
+int s3c24xx_register_clock(struct clk *clk)
+{
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* fill up the clk_lookup structure and register it*/
+	clk->lookup.dev_id = clk->devname;
+	clk->lookup.con_id = clk->name;
+	clk->lookup.clk = clk;
+	clkdev_add(&clk->lookup);
+
+	return 0;
+}
+
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+	int fails = 0;
+
+	for (; nr_clks > 0; nr_clks--, clks++) {
+		if (s3c24xx_register_clock(*clks) < 0) {
+			struct clk *clk = *clks;
+			printk(KERN_ERR "%s: failed to register %p: %s\n",
+			       __func__, clk, clk->name);
+			fails++;
+		}
+	}
+
+	return fails;
+}
+
+/**
+ * s3c_register_clocks() - register an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * Call s3c24xx_register_clock() on the @clkp array given, printing an
+ * error if it fails to register the clock (unlikely).
+ */
+void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
+{
+	int ret;
+
+	for (; nr_clks > 0; nr_clks--, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+}
+
+/**
+ * s3c_disable_clocks() - disable an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * for internal use only at initialisation time. disable the clocks in the
+ * @clkp array.
+ */
+
+void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
+{
+	for (; nr_clks > 0; nr_clks--, clkp++)
+		(clkp->enable)(clkp, 0);
+}
+
+/* initialise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
+
+	clk_xtal.rate = xtal;
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/* debugfs support to trace clock tree hierarchy and attributes */
+
+static struct dentry *clk_debugfs_root;
+
+static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
+{
+	struct clk *child;
+	const char *state;
+	char buf[255] = { 0 };
+	int n = 0;
+
+	if (c->name)
+		n = snprintf(buf, sizeof(buf) - 1, "%s", c->name);
+
+	if (c->devname)
+		n += snprintf(buf + n, sizeof(buf) - 1 - n, ":%s", c->devname);
+
+	state = (c->usage > 0) ? "on" : "off";
+
+	seq_printf(s, "%*s%-*s %-6s %-3d %-10lu\n",
+		   level * 3 + 1, "",
+		   50 - level * 3, buf,
+		   state, c->usage, clk_get_rate(c));
+
+	list_for_each_entry(child, &clocks, list) {
+		if (child->parent != c)
+			continue;
+
+		clock_tree_show_one(s, child, level + 1);
+	}
+}
+
+static int clock_tree_show(struct seq_file *s, void *data)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	seq_printf(s, " clock state ref rate\n");
+	seq_printf(s, "----------------------------------------------------\n");
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	list_for_each_entry(c, &clocks, list)
+		if (c->parent == NULL)
+			clock_tree_show_one(s, c, 0);
+
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+
+static int clock_tree_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clock_tree_show, inode->i_private);
+}
+
+static const struct file_operations clock_tree_fops = {
+	.open		= clock_tree_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int clock_rate_show(void *data, u64 *val)
+{
+	struct clk *c = data;
+	*val = clk_get_rate(c);
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_rate_show, NULL, "%llu\n");
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d;
+	struct clk *pa = c->parent;
+	char s[255];
+	char *p = s;
+
+	p += sprintf(p, "%s", c->devname);
+
+	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usage);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	d = debugfs_create_file("rate", S_IRUGO, c->dent, c, &clock_rate_fops);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err = -ENOMEM;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
+				 &clock_tree_fops);
+	if (!d)
+		goto err_out;
+
+	list_for_each_entry(c, &clocks, list) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */

arch/arm/plat-samsung/cpu.c

@@ -0,0 +1,57 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+	return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+	/* nothing here yet */
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
+		/*
+		 * S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read.
+		 */
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}

arch/arm/plat-samsung/dev-backlight.c

@@ -0,0 +1,152 @@
+/* linux/arch/arm/plat-samsung/dev-backlight.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Common infrastructure for PWM Backlight for Samsung boards
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/pwm_backlight.h>
+
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+
+static int samsung_bl_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *timer_dev =
+			container_of(dev->parent, struct platform_device, dev);
+	struct samsung_bl_gpio_info *bl_gpio_info =
+			timer_dev->dev.platform_data;
+
+	ret = gpio_request(bl_gpio_info->no, "Backlight");
+	if (ret) {
+		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
+		return ret;
+	}
+
+	/* Configure GPIO pin with specific GPIO function for PWM timer */
+	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
+
+	return 0;
+}
+
+static void samsung_bl_exit(struct device *dev)
+{
+	struct platform_device *timer_dev =
+			container_of(dev->parent, struct platform_device, dev);
+	struct samsung_bl_gpio_info *bl_gpio_info =
+			timer_dev->dev.platform_data;
+
+	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
+	gpio_free(bl_gpio_info->no);
+}
+
+/* Initialize few important fields of platform_pwm_backlight_data
+ * structure with default values. These fields can be overridden by
+ * board-specific values sent from machine file.
+ * For ease of operation, these fields are initialized with values
+ * used by most samsung boards.
+ * Users has the option of sending info about other parameters
+ * for their specific boards
+ */
+
+static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
+	.max_brightness = 255,
+	.dft_brightness = 255,
+	.pwm_period_ns  = 78770,
+	.init           = samsung_bl_init,
+	.exit           = samsung_bl_exit,
+};
+
+static struct platform_device samsung_dfl_bl_device __initdata = {
+	.name		= "pwm-backlight",
+};
+
+/* samsung_bl_set - Set board specific data (if any) provided by user for
+ * PWM Backlight control and register specific PWM and backlight device.
+ * @gpio_info:	structure containing GPIO info for PWM timer
+ * @bl_data:	structure containing Backlight control data
+ */
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+	struct platform_pwm_backlight_data *bl_data)
+{
+	int ret = 0;
+	struct platform_device *samsung_bl_device;
+	struct platform_pwm_backlight_data *samsung_bl_data;
+
+	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
+			sizeof(struct platform_device), GFP_KERNEL);
+	if (!samsung_bl_device) {
+		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
+		return;
+	}
+
+	samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
+		sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
+	if (!samsung_bl_data) {
+		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
+		goto err_data;
+	}
+
+	/* Copy board specific data provided by user */
+	samsung_bl_data->pwm_id = bl_data->pwm_id;
+	samsung_bl_device->dev.parent =
+			&s3c_device_timer[samsung_bl_data->pwm_id].dev;
+
+	if (bl_data->max_brightness)
+		samsung_bl_data->max_brightness = bl_data->max_brightness;
+	if (bl_data->dft_brightness)
+		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
+	if (bl_data->lth_brightness)
+		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
+	if (bl_data->pwm_period_ns)
+		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
+	if (bl_data->init)
+		samsung_bl_data->init = bl_data->init;
+	if (bl_data->notify)
+		samsung_bl_data->notify = bl_data->notify;
+	if (bl_data->notify_after)
+		samsung_bl_data->notify_after = bl_data->notify_after;
+	if (bl_data->exit)
+		samsung_bl_data->exit = bl_data->exit;
+	if (bl_data->check_fb)
+		samsung_bl_data->check_fb = bl_data->check_fb;
+
+	/* Keep the GPIO info for future use */
+	s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
+
+	/* Register the specific PWM timer dev for Backlight control */
+	ret = platform_device_register(
+			&s3c_device_timer[samsung_bl_data->pwm_id]);
+	if (ret) {
+		printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
+		goto err_plat_reg1;
+	}
+
+	/* Register the Backlight dev */
+	ret = platform_device_register(samsung_bl_device);
+	if (ret) {
+		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
+		goto err_plat_reg2;
+	}
+
+	return;
+
+err_plat_reg2:
+	platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
+err_plat_reg1:
+	kfree(samsung_bl_data);
+err_data:
+	kfree(samsung_bl_device);
+	return;
+}

arch/arm/plat-samsung/dev-uart.c

@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ *	originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};

arch/arm/plat-samsung/dma-ops.c

@@ -0,0 +1,140 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+#include <linux/export.h>
+
+#include <mach/dma.h>
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+				struct samsung_dma_req *param,
+				struct device *dev, char *ch_name)
+{
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(param->cap, mask);
+
+	if (dev->of_node)
+		return (unsigned)dma_request_slave_channel(dev, ch_name);
+	else
+		return (unsigned)dma_request_channel(mask, pl330_filter,
+							(void *)dma_ch);
+}
+
+static int samsung_dmadev_release(unsigned ch, void *param)
+{
+	dma_release_channel((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static int samsung_dmadev_config(unsigned ch,
+				struct samsung_dma_config *param)
+{
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_slave_config slave_config;
+
+	if (param->direction == DMA_DEV_TO_MEM) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = param->direction;
+		slave_config.src_addr = param->fifo;
+		slave_config.src_addr_width = param->width;
+		slave_config.src_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else if (param->direction == DMA_MEM_TO_DEV) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = param->direction;
+		slave_config.dst_addr = param->fifo;
+		slave_config.dst_addr_width = param->width;
+		slave_config.dst_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else {
+		pr_warn("unsupported direction\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+			struct samsung_dma_prep *param)
+{
+	struct scatterlist sg;
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_async_tx_descriptor *desc;
+
+	switch (param->cap) {
+	case DMA_SLAVE:
+		sg_init_table(&sg, 1);
+		sg_dma_len(&sg) = param->len;
+		sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)),
+			    param->len, offset_in_page(param->buf));
+		sg_dma_address(&sg) = param->buf;
+
+		desc = dmaengine_prep_slave_sg(chan,
+			&sg, 1, param->direction, DMA_PREP_INTERRUPT);
+		break;
+	case DMA_CYCLIC:
+		desc = dmaengine_prep_dma_cyclic(chan, param->buf,
+			param->len, param->period, param->direction,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		break;
+	default:
+		dev_err(&chan->dev->device, "unsupported format\n");
+		return -EFAULT;
+	}
+
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+		return -EFAULT;
+	}
+
+	desc->callback = param->fp;
+	desc->callback_param = param->fp_param;
+
+	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+	dma_async_issue_pending((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+	return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+static struct samsung_dma_ops dmadev_ops = {
+	.request	= samsung_dmadev_request,
+	.release	= samsung_dmadev_release,
+	.config		= samsung_dmadev_config,
+	.prepare	= samsung_dmadev_prepare,
+	.trigger	= samsung_dmadev_trigger,
+	.started	= NULL,
+	.flush		= samsung_dmadev_flush,
+	.stop		= samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+	return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);

arch/arm/plat-samsung/dma.c

@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/dma.c
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);

arch/arm/plat-samsung/include/plat/adc-core.h

@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
+	s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */

arch/arm/plat-samsung/include/plat/adc.h

@@ -0,0 +1,36 @@
+/* arch/arm/plat-samsung/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/	
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+struct platform_device;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+			 unsigned int channel, unsigned int nr_samples);
+
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */

arch/arm/plat-samsung/include/plat/ata-core.h

@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+	s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */

arch/arm/plat-samsung/include/plat/backlight.h

@@ -0,0 +1,26 @@
+/* linux/arch/arm/plat-samsung/include/plat/backlight.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_BACKLIGHT_H
+#define __ASM_PLAT_BACKLIGHT_H __FILE__
+
+/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
+ * @no:		GPIO number for PWM timer out
+ * @func:	Special function of GPIO line for PWM timer
+ */
+struct samsung_bl_gpio_info {
+	int no;
+	int func;
+};
+
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+	struct platform_pwm_backlight_data *bl_data);
+
+#endif /* __ASM_PLAT_BACKLIGHT_H */

arch/arm/plat-samsung/include/plat/camport.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series camera interface helper functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SAMSUNG_CAMPORT_H_
+#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
+
+enum s5p_camport_id {
+	S5P_CAMPORT_A,
+	S5P_CAMPORT_B,
+};
+
+/*
+ * The helper functions to configure GPIO for the camera parallel bus.
+ * The camera port can be multiplexed with any FIMC entity, even multiple
+ * FIMC entities are allowed to be attached to a single port simultaneously.
+ * These functions are to be used in the board setup code.
+ */
+int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
+int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
+
+#endif /* __PLAT_SAMSUNG_CAMPORT_H */

arch/arm/plat-samsung/include/plat/clock-clksrc.h

@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ *	Copyright 2008 Openmoko, Inc.
+ *	Copyright 2008 Simtec Electronics
+ *		Ben Dooks <ben@simtec.co.uk>
+ *		http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+	void __iomem		*reg;
+	unsigned short		shift;
+	unsigned short		size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+	struct clk		clk;
+	struct clksrc_sources	*sources;
+
+	struct clksrc_reg	reg_src;
+	struct clksrc_reg	reg_div;
+};
+
+/**
+ * s3c_set_clksrc() - setup the clock from the register settings
+ * @clk: The clock to setup.
+ * @announce: true to announce the setting to printk().
+ *
+ * Setup the clock from the current register settings, for when the
+ * kernel boots or if it is resuming from a possibly unknown state.
+ */
+extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);

arch/arm/plat-samsung/include/plat/clock.h

@@ -0,0 +1,156 @@
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
+#include <linux/spinlock.h>
+#include <linux/clkdev.h>
+
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fields again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct list_head      list;
+	struct module        *owner;
+	struct clk           *parent;
+	const char           *name;
+	const char		*devname;
+	int		      id;
+	int		      usage;
+	unsigned long         rate;
+	unsigned long         ctrlbit;
+
+	struct clk_ops		*ops;
+	int		    (*enable)(struct clk *, int enable);
+	struct clk_lookup	lookup;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_epll;
+extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C2443/S3C2416 specific clocks */
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+
+/* S3C24XX UART clocks */
+extern struct clk s3c24xx_clk_uart0;
+extern struct clk s3c24xx_clk_uart1;
+extern struct clk s3c24xx_clk_uart2;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_h2;
+extern struct clk clk_27m;
+extern struct clk clk_48m;
+extern struct clk clk_xusbxti;
+
+extern int clk_default_setrate(struct clk *clk, unsigned long rate);
+extern struct clk_ops clk_ops_def_setrate;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern spinlock_t clocks_lock;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
+
+extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
+
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s5p_register_clocks(unsigned long xtal_freq);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+				 unsigned long hclk,
+				 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+
+/* S3C2410 specific clock functions */
+
+extern int s3c2410_baseclk_add(void);
+
+/* S3C2443/S3C2416 specific clock functions */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       unsigned int *divs, int nr_divs,
+				       int divmask);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -0,0 +1,293 @@
+/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+ *
+ * Copyright (c) 2006-2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
+union s3c_iobank {
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_S3C2410_IOTIMING
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+#else
+#define s3c2410_iotiming_debugfs NULL
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
+
+/* S3C2412 compatible routines */
+
+#ifdef CONFIG_S3C2412_IOTIMING
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+#else
+#define s3c2412_iotiming_debugfs NULL
+#define s3c2412_iotiming_calc NULL
+#define s3c2412_iotiming_get NULL
+#define s3c2412_iotiming_set NULL
+#endif /* CONFIG_S3C2412_IOTIMING */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}

arch/arm/plat-samsung/include/plat/cpu-freq.h

@@ -0,0 +1,145 @@
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006-2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
+struct s3c_freq {
+	unsigned long	fclk;
+	unsigned long	armclk;
+	unsigned long	hclk_tns;	/* in 10ths of ns */
+	unsigned long	hclk;
+	unsigned long	pclk;
+};
+
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
+ */
+struct s3c_cpufreq_freqs {
+	struct cpufreq_freqs	freqs;
+	struct s3c_freq		old;
+	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
+struct s3c_clkdivs {
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
+struct s3c_pllval {
+	unsigned long		freq;
+	unsigned long		pll_reg;
+};
+
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
+ *
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
+ */
+struct s3c_cpufreq_board {
+	unsigned int	refresh;
+	unsigned int	auto_io:1;	/* automatically init io timings. */
+	unsigned int	need_io:1;	/* set if needs io timing support. */
+
+	/* any non-zero field in here is taken as an upper limit. */
+	struct s3c_freq	max;	/* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	return 0;
+}
+#endif  /* CONFIG_CPU_FREQ_S3C */

arch/arm/plat-samsung/include/plat/cpu.h

@@ -0,0 +1,225 @@
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID		0x32400000
+#define S3C24XX_CPU_MASK	0xFFF00000
+
+#define S3C2412_CPU_ID		0x32412000
+#define S3C2412_CPU_MASK	0xFFFFF000
+
+#define S3C6400_CPU_ID		0x36400000
+#define S3C6410_CPU_ID		0x36410000
+#define S3C64XX_CPU_MASK	0xFFFFF000
+
+#define S5P6440_CPU_ID		0x56440000
+#define S5P6450_CPU_ID		0x36450000
+#define S5P64XX_CPU_MASK	0xFFFFF000
+
+#define S5PC100_CPU_ID		0x43100000
+#define S5PC100_CPU_MASK	0xFFFFF000
+
+#define S5PV210_CPU_ID		0x43110000
+#define S5PV210_CPU_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5440_SOC_ID	0xE5440000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+    defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx()	is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C2412)
+# define soc_is_s3c2412()	is_samsung_s3c2412()
+#else
+# define soc_is_s3c2412()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
+#else
+# define soc_is_s3c64xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440()	is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450()	is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100()	is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210()	is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440()	is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440()	0
+#endif
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(void);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cpus, unsigned int cputab_size);
+
+/* core initialisation functions */
+
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+extern struct syscore_ops s3c2410_pm_syscore_ops;
+extern struct syscore_ops s3c2412_pm_syscore_ops;
+extern struct syscore_ops s3c2416_pm_syscore_ops;
+extern struct syscore_ops s3c244x_pm_syscore_ops;
+
+/* system device subsystems */
+
+extern struct bus_type s3c2410_subsys;
+extern struct bus_type s3c2410a_subsys;
+extern struct bus_type s3c2412_subsys;
+extern struct bus_type s3c2416_subsys;
+extern struct bus_type s3c2440_subsys;
+extern struct bus_type s3c2442_subsys;
+extern struct bus_type s3c2443_subsys;
+extern struct bus_type s3c6410_subsys;
+extern struct bus_type s5p64x0_subsys;
+extern struct bus_type s5pv210_subsys;
+extern struct bus_type exynos_subsys;
+
+extern void (*s5pc1xx_idle)(void);
+
+#endif

arch/arm/plat-samsung/include/plat/devs.h

@@ -0,0 +1,159 @@
+/* arch/arm/plat-samsung/include/plat/devs.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c64xx_device_ac97;
+extern struct platform_device s3c64xx_device_iis0;
+extern struct platform_device s3c64xx_device_iis1;
+extern struct platform_device s3c64xx_device_iisv4;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+extern struct platform_device s3c64xx_device_spi2;
+
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_cfcon;
+extern struct platform_device s3c_device_fb;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_timer[];
+extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_usb_hsudc;
+extern struct platform_device s3c_device_wdt;
+
+extern struct platform_device s5p_device_ehci;
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+extern struct platform_device s5p_device_fimc3;
+extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_jpeg;
+extern struct platform_device s5p_device_g2d;
+extern struct platform_device s5p_device_fimd0;
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_i2c_hdmiphy;
+extern struct platform_device s5p_device_mfc;
+extern struct platform_device s5p_device_mfc_l;
+extern struct platform_device s5p_device_mfc_r;
+extern struct platform_device s5p_device_mipi_csis0;
+extern struct platform_device s5p_device_mipi_csis1;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_onenand;
+extern struct platform_device s5p_device_sdo;
+
+extern struct platform_device s5p6440_device_iis;
+extern struct platform_device s5p6440_device_pcm;
+
+extern struct platform_device s5p6450_device_iis0;
+extern struct platform_device s5p6450_device_iis1;
+extern struct platform_device s5p6450_device_iis2;
+extern struct platform_device s5p6450_device_pcm0;
+
+
+extern struct platform_device s5pc100_device_ac97;
+extern struct platform_device s5pc100_device_iis0;
+extern struct platform_device s5pc100_device_iis1;
+extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
+extern struct platform_device s5pc100_device_spdif;
+
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_spdif;
+
+extern struct platform_device exynos4_device_ac97;
+extern struct platform_device exynos4_device_ahci;
+extern struct platform_device exynos4_device_i2s0;
+extern struct platform_device exynos4_device_i2s1;
+extern struct platform_device exynos4_device_i2s2;
+extern struct platform_device exynos4_device_ohci;
+extern struct platform_device exynos4_device_pcm0;
+extern struct platform_device exynos4_device_pcm1;
+extern struct platform_device exynos4_device_pcm2;
+extern struct platform_device exynos4_device_spdif;
+
+extern struct platform_device samsung_asoc_idma;
+extern struct platform_device samsung_device_keypad;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
+
+#endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */

arch/arm/plat-samsung/include/plat/dma-core.h

@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+

arch/arm/plat-samsung/include/plat/dma-ops.h

@@ -0,0 +1,69 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+#include <mach/dma.h>
+
+struct samsung_dma_req {
+	enum dma_transaction_type cap;
+	struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_prep {
+	enum dma_transaction_type cap;
+	enum dma_transfer_direction direction;
+	dma_addr_t buf;
+	unsigned long period;
+	unsigned long len;
+	void (*fp)(void *data);
+	void *fp_param;
+};
+
+struct samsung_dma_config {
+	enum dma_transfer_direction direction;
+	enum dma_slave_buswidth width;
+	dma_addr_t fifo;
+};
+
+struct samsung_dma_ops {
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param,
+				struct device *dev, char *ch_name);
+	int (*release)(unsigned ch, void *param);
+	int (*config)(unsigned ch, struct samsung_dma_config *param);
+	int (*prepare)(unsigned ch, struct samsung_dma_prep *param);
+	int (*trigger)(unsigned ch);
+	int (*started)(unsigned ch);
+	int (*flush)(unsigned ch);
+	int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+	if (samsung_dma_is_dmadev())
+		return samsung_dmadev_get_ops();
+	else
+		return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */

arch/arm/plat-samsung/include/plat/dma-pl330.h

@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since DMA PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+	DMACH_UART0_RX = 0,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_MSM_REQ3,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
+	DMACH_MIPI_HSI0,
+	DMACH_MIPI_HSI1,
+	DMACH_MIPI_HSI2,
+	DMACH_MIPI_HSI3,
+	DMACH_MIPI_HSI4,
+	DMACH_MIPI_HSI5,
+	DMACH_MIPI_HSI6,
+	DMACH_MIPI_HSI7,
+	DMACH_DISP1,
+	DMACH_MTOM_0,
+	DMACH_MTOM_1,
+	DMACH_MTOM_2,
+	DMACH_MTOM_3,
+	DMACH_MTOM_4,
+	DMACH_MTOM_5,
+	DMACH_MTOM_6,
+	DMACH_MTOM_7,
+	/* END Marker, also used to denote a reserved channel */
+	DMACH_MAX,
+};
+
+struct s3c2410_dma_client {
+	char	*name;
+};
+
+static inline bool samsung_dma_has_circular(void)
+{
+	return true;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return true;
+}
+
+#include <plat/dma-ops.h>
+
+#endif	/* __DMA_PL330_H_ */

arch/arm/plat-samsung/include/plat/dma-s3c24xx.h

@@ -0,0 +1,78 @@
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support - per SoC functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/dma-core.h>
+
+extern struct bus_type dma_subsys;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+
+	void	(*direction)(struct s3c2410_dma_chan *chan,
+			     struct s3c24xx_dma_map *map,
+			     enum dma_data_direction dir);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);

arch/arm/plat-samsung/include/plat/dma.h

@@ -0,0 +1,130 @@
+/* arch/arm/plat-samsung/include/plat/dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#include <linux/dma-mapping.h>
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+enum dma_ch;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(enum dma_ch channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(enum dma_ch channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(enum dma_ch channel,
+		enum dma_data_direction source, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(enum dma_ch channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
+
+#include <plat/dma-ops.h>
+
+#endif

arch/arm/plat-samsung/include/plat/fb-core.h

@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fb-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_FB_CORE_H
+#define __ASM_PLAT_FB_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+	s3c_device_fb.name = name;
+#endif
+}
+
+/* Re-define device name depending on support. */
+static inline void s5p_fb_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMD0
+	case 0:
+		s5p_device_fimd0.name = name;
+	break;
+#endif
+	default:
+		printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
+	break;
+	}
+}
+
+#endif /* __ASM_PLAT_FB_CORE_H */

arch/arm/plat-samsung/include/plat/fb-s3c2410.h

@@ -0,0 +1,72 @@
+/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_FB_S3C2410_H
+#define __ASM_PLAT_FB_S3C2410_H __FILE__
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_PLAT_FB_S3C2410_H */

arch/arm/plat-samsung/include/plat/fb.h

@@ -0,0 +1,71 @@
+/* arch/arm/plat-samsung/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+#include <linux/platform_data/video_s3c.h>
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
+/**
+ * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pv210_fb_gpio_setup_24bpp(void);
+
+/**
+ * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
+ */
+extern void exynos4_fimd0_gpio_setup_24bpp(void);
+
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */

arch/arm/plat-samsung/include/plat/fimc-core.h

@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+	case 0:
+		s5p_device_fimc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+	case 1:
+		s5p_device_fimc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+	case 2:
+		s5p_device_fimc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC3
+	case 3:
+		s5p_device_fimc3.name = name;
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */

arch/arm/plat-samsung/include/plat/fiq.h

@@ -0,0 +1,13 @@
+/* linux/arch/arm/plat-samsung/include/plat/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);

arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h

@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
+					 unsigned int off, unsigned int config)
+{
+	return (chip->config->set_config)(chip, off, config);
+}
+
+static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
+					      unsigned int off)
+{
+	return (chip->config->get_config)(chip, off);
+}
+
+static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
+					  unsigned int off, samsung_gpio_pull_t pull)
+{
+	return (chip->config->set_pull)(chip, off, pull);
+}
+
+static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
+							  unsigned int off)
+{
+	return chip->config->get_pull(chip, off);
+}
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+				    unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+				      unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = No pull resistor connected
+ *	01 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ */
+extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				       unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * samsung_gpio_getpull_updown() - Get configuration for choice of up,
+ * down or none
+ *
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor
+ * for the given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						       unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-up resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+						    unsigned int off);
+
+/**
+ * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
+*/
+extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+						      unsigned int off);
+
+/**
+ * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ *	x1 = No pull up resistor
+ */
+extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull);
+
+/**
+ * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as samsung_gpio_setpull_upown.
+*/
+extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+						unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -0,0 +1,246 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+#include <linux/types.h>
+
+typedef unsigned int __bitwise__ samsung_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ *
+ * @sa samsung_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
+ */
+struct samsung_gpio_cfg {
+	unsigned int	cfg_eint;
+
+	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
+				    samsung_gpio_pull_t pull);
+
+	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
+			       unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
+
+#define samsung_gpio_is_cfg_special(_cfg) \
+	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @to to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *	for (gpio = start; gpio < end; gpio++)
+ *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/**
+ * s3c_gpio_getcfg - Read the current function for a GPIO pin
+ * @pin: The pin to read the configuration value for.
+ *
+ * Read the configuration state of the given @pin, returning a value that
+ * could be passed back to s3c_gpio_cfgpin().
+ *
+ * @sa s3c_gpio_cfgpin
+ */
+extern unsigned s3c_gpio_getcfg(unsigned int pin);
+
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependent on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successful, or a negative error
+ * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg, samsung_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+					   unsigned int cfg)
+{
+	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5P series.
+ */
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successful, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
+/**
+ * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
+ * @pin: The pin number from the group to be registered
+ *
+ * This function registers gpio interrupt support for the group that the
+ * specified pin belongs to.
+ *
+ * The total number of gpio pins is quite large ob s5p series. Registering
+ * irq support for all of them would be a resource waste. Because of that the
+ * interrupt support for standard gpio pins is registered dynamically.
+ *
+ * It will return the irq number of the interrupt that has been registered
+ * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
+ * to call this function more than once for the same gpio group (the group
+ * will be registered only once).
+ */
+extern int s5p_register_gpio_interrupt(int pin);
+
+/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
+ * registration (see s5p_register_gpio_interrupt function)
+ * @chain_irq: chained irq number for the gpio int handler for this bank
+ * @start: start gpio group number of this bank
+ * @nr_groups: number of gpio groups handled by this bank
+ *
+ * This functions registers initial information about gpio banks that
+ * can be later used by the s5p_register_gpio_interrupt() function to
+ * enable support for gpio interrupt for particular gpio group.
+ */
+#ifdef CONFIG_S5P_GPIO_INT
+extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
+#else
+#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
+#endif
+
+#endif /* __PLAT_GPIO_CFG_H */

arch/arm/plat-samsung/include/plat/gpio-core.h

@@ -0,0 +1,142 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_GPIO_CORE_H
+#define __PLAT_SAMSUNG_GPIO_CORE_H
+
+#define GPIOCON_OFF	(0x00)
+#define GPIODAT_OFF	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct samsung_gpio_chip;
+
+/**
+ * struct samsung_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct samsung_gpio_pm {
+	void (*save)(struct samsung_gpio_chip *chip);
+	void (*resume)(struct samsung_gpio_chip *chip);
+};
+
+struct samsung_gpio_cfg;
+
+/**
+ * struct samsung_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
+ * @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
+ * @pm_save: Save information for suspend/resume support.
+ * @bitmap_gpio_int: Bitmap for representing GPIO interrupt or not.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any  contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
+ */
+struct samsung_gpio_chip {
+	struct gpio_chip	chip;
+	struct samsung_gpio_cfg	*config;
+	struct samsung_gpio_pm	*pm;
+	void __iomem		*base;
+	int			irq_base;
+	int			group;
+	spinlock_t		 lock;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
+	u32			bitmap_gpio_int;
+};
+
+static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct samsung_gpio_chip, chip);
+}
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
+/* exported for core SoC support to change */
+extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
+{
+	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide samsung_gpiolib_getchip */
+
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip;
+
+	if (pin > S3C_GPIO_END)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
+
+static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
+#endif
+
+#ifdef CONFIG_PM
+extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
+extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define samsung_gpio_pm_1bit NULL
+#define samsung_gpio_pm_2bit NULL
+#define samsung_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
+
+#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */

arch/arm/plat-samsung/include/plat/hdmi.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */

arch/arm/plat-samsung/include/plat/iic-core.h

@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+	/* currently this device is always compiled in */
+	s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+	s3c_device_i2c1.name = name;
+#endif
+}
+
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+	s3c_device_i2c2.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */

arch/arm/plat-samsung/include/plat/irq-uart.h

@@ -0,0 +1,20 @@
+/* arch/arm/plat-samsung/include/plat/irq-uart.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c_uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+

arch/arm/plat-samsung/include/plat/irq-vic-timer.h

@@ -0,0 +1,13 @@
+/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC IRQ VIC timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);

arch/arm/plat-samsung/include/plat/irqs.h

@@ -0,0 +1,81 @@
+/* linux/arch/arm/plat-samsung/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_IRQS_H
+#define __PLAT_SAMSUNG_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET		(32)
+
+#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE		S5P_IRQ(0)
+#define S5P_VIC1_BASE		S5P_IRQ(32)
+#define S5P_VIC2_BASE		S5P_IRQ(64)
+#define S5P_VIC3_BASE		S5P_IRQ(96)
+
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE		S5P_VIC0_BASE
+#define IRQ_VIC1_BASE		S5P_VIC1_BASE
+#define IRQ_VIC2_BASE		S5P_VIC2_BASE
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
+
+#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+#define IRQ_TIMER_COUNT		(5)
+
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+					: ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
+						((irq) - S5P_EINT_BASE1) : \
+						((irq) + 16 - S5P_EINT_BASE2))
+
+#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+   To avoid memory waste irq descriptors are allocated only for
+   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+   to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE	8
+#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
+
+#endif /* __PLAT_SAMSUNG_IRQS_H */

arch/arm/plat-samsung/include/plat/keypad-core.h

@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+	samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */

arch/arm/plat-samsung/include/plat/keypad.h

@@ -0,0 +1,31 @@
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/samsung-keypad.h>
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */

arch/arm/plat-samsung/include/plat/map-base.h

@@ -0,0 +1,46 @@
+/* linux/include/asm-arm/plat-s3c/map.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - Memory map definitions (virtual addresses)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_H
+#define __ASM_PLAT_MAP_H __FILE__
+
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
+ * little of the VA space as possible so vmalloc and friends have a
+ * better chance of getting memory.
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ */
+
+#define S3C_ADDR_BASE	0xF6000000
+
+#ifndef __ASSEMBLY__
+#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
+#else
+#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
+#endif
+
+#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
+#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
+#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
+#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
+#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
+
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
+#endif /* __ASM_PLAT_MAP_H */

arch/arm/plat-samsung/include/plat/map-s3c.h

@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ		S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
+#define S3C24XX_VA_UART		S3C_VA_UART
+
+#define S3C24XX_VA_TIMER	S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
+
+#define S3C2410_PA_UART		(0x50000000)
+#define S3C24XX_PA_UART		S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO		(0x56000000)
+#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD	S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE	S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */

arch/arm/plat-samsung/include/plat/map-s5p.h

@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
+#define S5P_VA_CMU		S3C_ADDR(0x02100000)
+#define S5P_VA_PMU		S3C_ADDR(0x02180000)
+#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1		S5P_VA_GPIO
+#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
+
+#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
+#define S5P_VA_SYSRAM_NS	S3C_ADDR(0x02410000)
+#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
+
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
+#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
+
+#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
+#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
+#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
+
+#define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
+#define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0		S5P_VA_UART(0)
+#define S5P_VA_UART1		S5P_VA_UART(1)
+#define S5P_VA_UART2		S5P_VA_UART(2)
+#define S5P_VA_UART3		S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
+
+#include <plat/map-s3c.h>
+
+#endif /* __ASM_PLAT_MAP_S5P_H */

arch/arm/plat-samsung/include/plat/mfc.h

@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_MFC_H
+#define __PLAT_SAMSUNG_MFC_H __FILE__
+
+struct s5p_mfc_dt_meminfo {
+	unsigned long	loff;
+	unsigned long	lsize;
+	unsigned long	roff;
+	unsigned long	rsize;
+	char		*compatible;
+};
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase:	base address for MFC 'right' memory interface
+ * @rsize:	size of the memory reserved for MFC 'right' interface
+ * @lbase:	base address for MFC 'left' memory interface
+ * @lsize:	size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize);
+
+int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
+				int depth, void *data);
+
+#endif /* __PLAT_SAMSUNG_MFC_H */

arch/arm/plat-samsung/include/plat/nand-core.h

@@ -0,0 +1,28 @@
+/* arch/arm/plat-samsung/include/plat/nand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C -  Nand Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_NAND_CORE_H
+#define __ASM_ARCH_NAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+	s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_H */

arch/arm/plat-samsung/include/plat/onenand-core.h

@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/plat-samsung/onenand-core.h
+ *
+ *  Copyright (c) 2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ONENAND_CORE_H
+#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+	s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+	s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_H */

arch/arm/plat-samsung/include/plat/pll.h

@@ -0,0 +1,323 @@
+/* linux/arch/arm/plat-samsung/include/plat/pll.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL codes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/div64.h>
+
+#define S3C24XX_PLL_MDIV_MASK		(0xFF)
+#define S3C24XX_PLL_PDIV_MASK		(0x1F)
+#define S3C24XX_PLL_SDIV_MASK		(0x3)
+#define S3C24XX_PLL_MDIV_SHIFT		(12)
+#define S3C24XX_PLL_PDIV_SHIFT		(4)
+#define S3C24XX_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#define S3C2416_PLL_MDIV_MASK		(0x3FF)
+#define S3C2416_PLL_PDIV_MASK		(0x3F)
+#define S3C2416_PLL_SDIV_MASK		(0x7)
+#define S3C2416_PLL_MDIV_SHIFT		(14)
+#define S3C2416_PLL_PDIV_SHIFT		(5)
+#define S3C2416_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned int s3c2416_get_pll(unsigned int pllval,
+					   unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
+	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
+	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
+
+	fvco = (uint64_t)baseclk * mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned int)fvco;
+}
+
+#define S3C6400_PLL_MDIV_MASK		(0x3FF)
+#define S3C6400_PLL_PDIV_MASK		(0x3F)
+#define S3C6400_PLL_SDIV_MASK		(0x7)
+#define S3C6400_PLL_MDIV_SHIFT		(16)
+#define S3C6400_PLL_PDIV_SHIFT		(8)
+#define S3C6400_PLL_SDIV_SHIFT		(0)
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL6553X_MDIV_MASK	(0x7F)
+#define PLL6553X_PDIV_MASK	(0x1F)
+#define PLL6553X_SDIV_MASK	(0x3)
+#define PLL6553X_KDIV_MASK	(0xFFFF)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+/* CON0 bit-fields */
+#define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL46XX_PDIV_MASK	(0x3F)
+#define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
+#define PLL46XX_MDIV_SHIFT	(16)
+#define PLL46XX_PDIV_SHIFT	(8)
+#define PLL46XX_SDIV_SHIFT	(0)
+
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
+enum pll46xx_type_t {
+	pll_4600,
+	pll_4650,
+	pll_4650c,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1,
+					    enum pll46xx_type_t pll_type)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	if (pll_type == pll_4600) {
+		tmp *= (mdiv << 16) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 16;
+	} else {
+		tmp *= (mdiv << 10) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 10;
+	}
+
+	return result;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/*
+	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL65XX_MDIV_MASK	(0x3FF)
+#define PLL65XX_PDIV_MASK	(0x3F)
+#define PLL65XX_SDIV_MASK	(0x7)
+#define PLL65XX_MDIV_SHIFT	(16)
+#define PLL65XX_PDIV_SHIFT	(8)
+#define PLL65XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}

arch/arm/plat-samsung/include/plat/pm.h

@@ -0,0 +1,186 @@
+/* arch/arm/plat-samsung/include/plat/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#include <linux/irq.h>
+
+struct device;
+
+#ifdef CONFIG_PM
+
+extern __init int s3c_pm_init(void);
+extern __init int s3c64xx_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+	return 0;
+}
+
+static inline int s3c64xx_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern int (*pm_cpu_sleep)(unsigned long);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
+/* from sleep.S */
+
+extern void s3c_cpu_resume(void);
+
+extern int s3c2410_cpu_suspend(unsigned long);
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+	u32	ulcon;
+	u32	ucon;
+	u32	ufcon;
+	u32	umcon;
+	u32	ubrdiv;
+	u32	udivslot;
+};
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
+extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#define s3c_irqext_wake NULL
+#endif
+
+/* PM debug functions */
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+#else
+#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while(0)
+#define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_cleanup() do { } while(0)
+#define s3c_pm_check_store()   do { } while(0)
+#endif
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+/**
+ * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void samsung_pm_restore_gpios(void);
+
+/**
+ * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
+ */
+extern void samsung_pm_save_gpios(void);
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);

arch/arm/plat-samsung/include/plat/pwm-clock.h

@@ -0,0 +1,81 @@
+/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_PWM_CLOCK_H
+#define __ASM_PLAT_PWM_CLOCK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	if (soc_is_s3c24xx())
+		return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s3c64xx() || soc_is_s5pc100())
+		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		return 0;
+	else
+		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	if (soc_is_s3c24xx())
+		return 1 << (tcfg1 + 1);
+	else
+		return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	if (soc_is_s3c24xx())
+		return 0;
+	else
+		return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	if (soc_is_s3c24xx())
+		return ilog2(div) - 1;
+	else
+		return ilog2(div);
+}
+#endif /* __ASM_PLAT_PWM_CLOCK_H */

arch/arm/plat-samsung/include/plat/regs-adc.h

@@ -0,0 +1,68 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
+#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
+#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
+
+
+/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL		(1<<16)
+#define S3C2410_ADCCON_ECFLG		(1<<15)
+#define S3C2410_ADCCON_PRSCEN		(1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2416_ADCCON_RESSEL		(1 << 3)
+#define S3C2410_ADCCON_STDBM		(1<<2)
+#define S3C2410_ADCCON_READ_START	(1<<1)
+#define S3C2410_ADCCON_ENABLE_START	(1<<0)
+#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+

arch/arm/plat-samsung/include/plat/regs-ata.h

@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x)	(x)
+
+#define S3C_CFATA_MUX		S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL		S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS		S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD		S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST		S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ		S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK		S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG		S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME	S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME	S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME	S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM		S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT		S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START	S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE	S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START	S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE	S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF	S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF	S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR		S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED		S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR		S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR		S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR		S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR		S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR		S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD		S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD		S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY	S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA	S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE	0x01
+
+#define S3C_ATA_CFG_SWAP	0x40
+#define S3C_ATA_CFG_IORDYEN	0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */

arch/arm/plat-samsung/include/plat/regs-dma.h

@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_DMA_H
+#define __ASM_PLAT_REGS_DMA_H __FILE__
+
+#define S3C2410_DMA_DISRC		(0x00)
+#define S3C2410_DMA_DISRCC		(0x04)
+#define S3C2410_DMA_DIDST		(0x08)
+#define S3C2410_DMA_DIDSTC		(0x0C)
+#define S3C2410_DMA_DCON		(0x10)
+#define S3C2410_DMA_DSTAT		(0x14)
+#define S3C2410_DMA_DCSRC		(0x18)
+#define S3C2410_DMA_DCDST		(0x1C)
+#define S3C2410_DMA_DMASKTRIG		(0x20)
+#define S3C2412_DMA_DMAREQSEL		(0x24)
+#define S3C2443_DMA_DMAREQSEL		(0x24)
+
+#define S3C2410_DISRCC_INC		(1 << 0)
+#define S3C2410_DISRCC_APB		(1 << 1)
+
+#define S3C2410_DMASKTRIG_STOP		(1 << 2)
+#define S3C2410_DMASKTRIG_ON		(1 << 1)
+#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
+
+#define S3C2410_DCON_DEMAND		(0 << 31)
+#define S3C2410_DCON_HANDSHAKE		(1 << 31)
+#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
+#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
+
+#define S3C2410_DCON_INTREQ		(1 << 29)
+
+#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
+#define S3C2410_DCON_CH0_UART0		(1 << 24)
+#define S3C2410_DCON_CH0_SDI		(2 << 24)
+#define S3C2410_DCON_CH0_TIMER		(3 << 24)
+#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
+
+#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
+#define S3C2410_DCON_CH1_UART1		(1 << 24)
+#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
+#define S3C2410_DCON_CH1_SPI		(3 << 24)
+#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
+
+#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
+#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
+#define S3C2410_DCON_CH2_SDI		(2 << 24)
+#define S3C2410_DCON_CH2_TIMER		(3 << 24)
+#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
+
+#define S3C2410_DCON_CH3_UART2		(0 << 24)
+#define S3C2410_DCON_CH3_SDI		(1 << 24)
+#define S3C2410_DCON_CH3_SPI		(2 << 24)
+#define S3C2410_DCON_CH3_TIMER		(3 << 24)
+#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
+
+#define S3C2410_DCON_SRCSHIFT		(24)
+#define S3C2410_DCON_SRCMASK		(7 << 24)
+
+#define S3C2410_DCON_BYTE		(0 << 20)
+#define S3C2410_DCON_HALFWORD		(1 << 20)
+#define S3C2410_DCON_WORD		(2 << 20)
+
+#define S3C2410_DCON_AUTORELOAD		(0 << 22)
+#define S3C2410_DCON_NORELOAD		(1 << 22)
+#define S3C2410_DCON_HWTRIG		(1 << 23)
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DIDSTC_CHKINT		(1 << 2)
+
+#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
+#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
+
+#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
+#define S3C2440_DCON_CH1_SDI		(6 << 24)
+
+#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
+#define S3C2440_DCON_CH2_MICIN		(6 << 24)
+
+#define S3C2440_DCON_CH3_MICIN		(5 << 24)
+#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+#endif /* CONFIG_CPU_S3C2412 */
+
+#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443)
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+#endif /* CONFIG_CPU_S3C2443 */
+
+#endif /* __ASM_PLAT_REGS_DMA_H */

arch/arm/plat-samsung/include/plat/regs-irqtype.h

@@ -0,0 +1,21 @@
+/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)

arch/arm/plat-samsung/include/plat/regs-nand.h

@@ -0,0 +1,123 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 NAND register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_NAND
+#define __ASM_ARM_REGS_NAND
+
+
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
+#define S3C2410_NFECC   S3C2410_NFREG(0x14)
+
+#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
+#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
+#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
+#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
+#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
+#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
+#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
+#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
+#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
+#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
+#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
+#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
+
+#define S3C2412_NFSBLK		S3C2410_NFREG(0x20)
+#define S3C2412_NFEBLK		S3C2410_NFREG(0x24)
+#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
+#define S3C2412_NFMECC_ERR0	S3C2410_NFREG(0x2C)
+#define S3C2412_NFMECC_ERR1	S3C2410_NFREG(0x30)
+#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
+#define S3C2412_NFMECC1		S3C2410_NFREG(0x38)
+#define S3C2412_NFSECC		S3C2410_NFREG(0x3C)
+
+#define S3C2410_NFCONF_EN          (1<<15)
+#define S3C2410_NFCONF_512BYTE     (1<<14)
+#define S3C2410_NFCONF_4STEP       (1<<13)
+#define S3C2410_NFCONF_INITECC     (1<<12)
+#define S3C2410_NFCONF_nFCE        (1<<11)
+#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
+
+#define S3C2410_NFSTAT_BUSY        (1<<0)
+
+#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
+#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
+#define S3C2440_NFCONF_ADVFLASH		(1<<3)
+#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
+
+#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
+#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
+#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
+#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
+#define S3C2440_NFCONT_RN_FALLING	(1<<8)
+#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
+#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
+#define S3C2440_NFCONT_INITECC		(1<<4)
+#define S3C2440_NFCONT_nFCE		(1<<1)
+#define S3C2440_NFCONT_ENABLE		(1<<0)
+
+#define S3C2440_NFSTAT_READY		(1<<0)
+#define S3C2440_NFSTAT_nCE		(1<<1)
+#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
+#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
+
+#define S3C2412_NFCONF_NANDBOOT		(1<<31)
+#define S3C2412_NFCONF_ECCCLKCON	(1<<30)
+#define S3C2412_NFCONF_ECC_MLC		(1<<24)
+#define S3C2412_NFCONF_TACLS_MASK	(7<<12)	/* 1 extra bit of Tacls */
+
+#define S3C2412_NFCONT_ECC4_DIRWR	(1<<18)
+#define S3C2412_NFCONT_LOCKTIGHT	(1<<17)
+#define S3C2412_NFCONT_SOFTLOCK		(1<<16)
+#define S3C2412_NFCONT_ECC4_ENCINT	(1<<13)
+#define S3C2412_NFCONT_ECC4_DECINT	(1<<12)
+#define S3C2412_NFCONT_MAIN_ECC_LOCK	(1<<7)
+#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
+#define S3C2412_NFCONT_nFCE1		(1<<2)
+#define S3C2412_NFCONT_nFCE0		(1<<1)
+
+#define S3C2412_NFSTAT_ECC_ENCDONE	(1<<7)
+#define S3C2412_NFSTAT_ECC_DECDONE	(1<<6)
+#define S3C2412_NFSTAT_ILLEGAL_ACCESS	(1<<5)
+#define S3C2412_NFSTAT_RnB_CHANGE	(1<<4)
+#define S3C2412_NFSTAT_nFCE1		(1<<3)
+#define S3C2412_NFSTAT_nFCE0		(1<<2)
+#define S3C2412_NFSTAT_Res1		(1<<1)
+#define S3C2412_NFSTAT_READY		(1<<0)
+
+#define S3C2412_NFECCERR_SERRDATA(x)	(((x) >> 21) & 0xf)
+#define S3C2412_NFECCERR_SERRBIT(x)	(((x) >> 18) & 0x7)
+#define S3C2412_NFECCERR_MERRDATA(x)	(((x) >> 7) & 0x3ff)
+#define S3C2412_NFECCERR_MERRBIT(x)	(((x) >> 4) & 0x7)
+#define S3C2412_NFECCERR_SPARE_ERR(x)	(((x) >> 2) & 0x3)
+#define S3C2412_NFECCERR_MAIN_ERR(x)	(((x) >> 2) & 0x3)
+#define S3C2412_NFECCERR_NONE		(0)
+#define S3C2412_NFECCERR_1BIT		(1)
+#define S3C2412_NFECCERR_MULTIBIT	(2)
+#define S3C2412_NFECCERR_ECCAREA	(3)
+
+
+
+#endif /* __ASM_ARM_REGS_NAND */
+

arch/arm/plat-samsung/include/plat/regs-serial.h

@@ -0,0 +1 @@
+#include <linux/serial_s3c.h>

arch/arm/plat-samsung/include/plat/regs-spi.h

@@ -0,0 +1,48 @@
+/* arch/arm/plat-samsung/include/plat/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+#define S3C2410_SPI1		(0x20)
+#define S3C2412_SPI1		(0x100)
+
+#define S3C2410_SPCON		(0x00)
+
+#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
+#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
+#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
+#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
+#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
+
+#define S3C2410_SPSTA		(0x04)
+
+#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
+#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
+#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
+#define S3C2412_SPSTA_READY_ORG	(1 << 3)
+
+#define S3C2410_SPPIN		(0x08)
+
+#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED	(1 << 1)
+#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
+
+#define S3C2410_SPPRE		(0x0C)
+#define S3C2410_SPTDAT		(0x10)
+#define S3C2410_SPRDAT		(0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */

arch/arm/plat-samsung/include/plat/regs-srom.h

@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_SAMSUNG_REGS_SROM_H
+#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
+
+#define S5P_SROM_BW		S5P_SROMREG(0x0)
+#define S5P_SROM_BC0		S5P_SROMREG(0x4)
+#define S5P_SROM_BC1		S5P_SROMREG(0x8)
+#define S5P_SROM_BC2		S5P_SROMREG(0xc)
+#define S5P_SROM_BC3		S5P_SROMREG(0x10)
+#define S5P_SROM_BC4		S5P_SROMREG(0x14)
+#define S5P_SROM_BC5		S5P_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
+#define S5P_SROM_BW__ADDRMODE__SHIFT		1
+#define S5P_SROM_BW__WAITENABLE__SHIFT		2
+#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
+
+#define S5P_SROM_BW__CS_MASK			0xf
+
+#define S5P_SROM_BW__NCS0__SHIFT		0
+#define S5P_SROM_BW__NCS1__SHIFT		4
+#define S5P_SROM_BW__NCS2__SHIFT		8
+#define S5P_SROM_BW__NCS3__SHIFT		12
+#define S5P_SROM_BW__NCS4__SHIFT		16
+#define S5P_SROM_BW__NCS5__SHIFT		20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5P_SROM_BCX__PMC__SHIFT		0
+#define S5P_SROM_BCX__TACP__SHIFT		4
+#define S5P_SROM_BCX__TCAH__SHIFT		8
+#define S5P_SROM_BCX__TCOH__SHIFT		12
+#define S5P_SROM_BCX__TACC__SHIFT		16
+#define S5P_SROM_BCX__TCOS__SHIFT		24
+#define S5P_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __PLAT_SAMSUNG_REGS_SROM_H */

arch/arm/plat-samsung/include/plat/regs-timer.h

@@ -0,0 +1,124 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+*/
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
+#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
+#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
+#define S3C2410_TCON	      S3C_TIMERREG(0x08)
+
+#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT  (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
+
+#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
+#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
+#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
+#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
+#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
+#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
+
+#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
+#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
+#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
+#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
+#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
+#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
+#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
+
+#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD	  (1<<22)
+#define S3C2410_TCON_T4MANUALUPD  (1<<21)
+#define S3C2410_TCON_T4START	  (1<<20)
+
+#define S3C2410_TCON_T3RELOAD	  (1<<19)
+#define S3C2410_TCON_T3INVERT	  (1<<18)
+#define S3C2410_TCON_T3MANUALUPD  (1<<17)
+#define S3C2410_TCON_T3START	  (1<<16)
+
+#define S3C2410_TCON_T2RELOAD	  (1<<15)
+#define S3C2410_TCON_T2INVERT	  (1<<14)
+#define S3C2410_TCON_T2MANUALUPD  (1<<13)
+#define S3C2410_TCON_T2START	  (1<<12)
+
+#define S3C2410_TCON_T1RELOAD	  (1<<11)
+#define S3C2410_TCON_T1INVERT	  (1<<10)
+#define S3C2410_TCON_T1MANUALUPD  (1<<9)
+#define S3C2410_TCON_T1START	  (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE	  (1<<4)
+#define S3C2410_TCON_T0RELOAD	  (1<<3)
+#define S3C2410_TCON_T0INVERT	  (1<<2)
+#define S3C2410_TCON_T0MANUALUPD  (1<<1)
+#define S3C2410_TCON_T0START	  (1<<0)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
+
+
+

arch/arm/plat-samsung/include/plat/regs-udc.h

@@ -0,0 +1,151 @@
+/* arch/arm/plat-samsung/include/plat/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+*/
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_USBDREG(x) (x)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
+
+#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
+#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
+#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
+#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
+#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_PWR_DEFAULT		(0x00)
+
+#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
+#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
+#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
+#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
+#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
+#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
+
+#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
+#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01)
+#define S3C2410_UDC_INDEX_EP2		(0x02)
+#define S3C2410_UDC_INDEX_EP3		(0x03)
+#define S3C2410_UDC_INDEX_EP4		(0x04)
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
+#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
+#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
+#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
+#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
+#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
+#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
+#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
+#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
+#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
+#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
+#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
+#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
+#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
+
+#define S3C2410_UDC_MAXP_8		(1 << 0)
+#define S3C2410_UDC_MAXP_16		(1 << 1)
+#define S3C2410_UDC_MAXP_32		(1 << 2)
+#define S3C2410_UDC_MAXP_64		(1 << 3)
+
+#endif

arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h

@@ -0,0 +1,51 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, this is a separate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
+
+#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */

arch/arm/plat-samsung/include/plat/regs-watchdog.h

@@ -0,0 +1,41 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Watchdog timer control
+*/
+
+
+#ifndef __ASM_ARCH_REGS_WATCHDOG_H
+#define __ASM_ARCH_REGS_WATCHDOG_H
+
+#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
+
+#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
+#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
+#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
+
+/* the watchdog can either generate a reset pulse, or an
+ * interrupt.
+ */
+
+#define S3C2410_WTCON_RSTEN   (0x01)
+#define S3C2410_WTCON_INTEN   (1<<2)
+#define S3C2410_WTCON_ENABLE  (1<<5)
+
+#define S3C2410_WTCON_DIV16   (0<<3)
+#define S3C2410_WTCON_DIV32   (1<<3)
+#define S3C2410_WTCON_DIV64   (2<<3)
+#define S3C2410_WTCON_DIV128  (3<<3)
+
+#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
+#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
+
+#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
+
+

arch/arm/plat-samsung/include/plat/rtc-core.h

@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_RTC_CORE_H
+#define __ASM_PLAT_RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
+	s3c_device_rtc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_RTC_CORE_H */

arch/arm/plat-samsung/include/plat/s5p-clock.h

@@ -0,0 +1,65 @@
+/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_bpll clk_ext_xtal_mux
+#define clk_fin_cpll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
+extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_bpll_div2;
+extern struct clk clk_fout_cpll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_mpll_div2;
+extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
+extern struct clk clk_fout_vpll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_bpll_fout;
+extern struct clksrc_sources clk_src_cpll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_mpll_fout;
+extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
+
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
+/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
+extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long s5p_spdif_get_rate(struct clk *clk);
+
+extern struct clk_ops s5p_sclk_spdif_ops;
+#endif /* __ASM_PLAT_S5P_CLOCK_H */

arch/arm/plat-samsung/include/plat/samsung-time.h

@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for samsung s3c and s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_TIME_H
+#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
+
+/* SAMSUNG HR-Timer Clock mode */
+enum samsung_timer_mode {
+	SAMSUNG_PWM0,
+	SAMSUNG_PWM1,
+	SAMSUNG_PWM2,
+	SAMSUNG_PWM3,
+	SAMSUNG_PWM4,
+};
+
+struct samsung_timer_source {
+	unsigned int event_id;
+	unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define SAMSUNG_TIMER_MIN_RANGE	4
+
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
+#define TCNT_MAX		0xffff
+#define TSCALER_DIV		25
+#define TDIV			50
+#define TSIZE			16
+#else
+#define TCNT_MAX		0xffffffff
+#define TSCALER_DIV		2
+#define TDIV			2
+#define TSIZE			32
+#endif
+
+#define NON_PERIODIC		0
+#define PERIODIC		1
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+					enum samsung_timer_mode source);
+
+extern void __init samsung_timer_init(void);
+
+#endif /* __ASM_PLAT_SAMSUNG_TIME_H */

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -0,0 +1,328 @@
+/* linux/arch/arm/plat-samsung/include/plat/sdhci.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <plat/devs.h>
+
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+				    struct s3c_sdhci_platdata *set);
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
+
+/* Helper function availability */
+
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
+
+/* S3C64XX SDHCI setup */
+
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+static inline void s3c6400_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6400_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s3c6410_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
+
+/* S5P64X0 SDHCI setup */
+
+#ifdef CONFIG_S5P64X0_SETUP_SDHCI_GPIO
+static inline void s5p64x0_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s5p64x0_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s5p6440_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s5p6450_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s5p64x0_default_sdhci0(void) { }
+static inline void s5p64x0_default_sdhci1(void) { }
+static inline void s5p6440_default_sdhci2(void) { }
+static inline void s5p6450_default_sdhci2(void) { }
+
+#endif /* CONFIG_S5P64X0_SETUP_SDHCI_GPIO */
+
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+static inline void s5pc100_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s5pc100_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s5pc100_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+/* S5PV210 SDHCI setup */
+
+#ifdef CONFIG_S5PV210_SETUP_SDHCI
+static inline void s5pv210_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s5pv210_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s5pv210_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s5pv210_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci1(void) { }
+static inline void s5pv210_default_sdhci2(void) { }
+static inline void s5pv210_default_sdhci3(void) { }
+
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
+
+/* EXYNOS4 SDHCI setup */
+#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
+static inline void exynos4_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void exynos4_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void exynos4_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void exynos4_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
+#endif
+}
+
+#else
+static inline void exynos4_default_sdhci0(void) { }
+static inline void exynos4_default_sdhci1(void) { }
+static inline void exynos4_default_sdhci2(void) { }
+static inline void exynos4_default_sdhci3(void) { }
+
+#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
+
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	default:
+		break;
+	}
+}
+#endif /* __PLAT_S3C_SDHCI_H */

arch/arm/plat-samsung/include/plat/spi-core.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_H
+#define __PLAT_S3C_SPI_CORE_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c64xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+	s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+	s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+	s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_H */

arch/arm/plat-samsung/include/plat/tv-core.h

@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/tv.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ *	Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * Samsung TV driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_PLAT_TV_H
+#define __SAMSUNG_PLAT_TV_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s5p_hdmi_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_hdmi.name = name;
+#endif
+}
+
+static inline void s5p_mixer_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_mixer.name = name;
+#endif
+}
+
+static inline void s5p_sdo_setname(char *name)
+{
+#ifdef CONFIG_S5P_DEV_TV
+	s5p_device_sdo.name = name;
+#endif
+}
+
+#endif /* __SAMSUNG_PLAT_TV_H */

arch/arm/plat-samsung/include/plat/uncompress.h

@@ -0,0 +1,166 @@
+/* arch/arm/plat-samsung/include/plat/uncompress.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+unsigned int fifo_mask;
+unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+#ifdef S3C_PA_UART
+#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void putc(int ch)
+{
+	if (!config_enabled(CONFIG_DEBUG_LL))
+		return;
+
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon;
+
+	if (!config_enabled(CONFIG_DEBUG_LL))
+		return;
+
+	fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
+static void
+arch_decomp_setup(void)
+{
+	/* we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+
+	/* Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */

arch/arm/plat-samsung/include/plat/usb-phy.h

@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_USB_PHY_H
+#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
+
+#include <linux/usb/samsung_usb_phy.h>
+
+extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
+extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
+
+#endif /* __PLAT_SAMSUNG_USB_PHY_H */

arch/arm/plat-samsung/include/plat/wakeup-mask.h

@@ -0,0 +1,44 @@
+/* arch/arm/plat-samsung/include/plat/wakeup-mask.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __PLAT_WAKEUP_MASK_H
+#define __PLAT_WAKEUP_MASK_H __file__
+
+/* if no irq yet defined, but still want to mask */
+#define NO_WAKEUP_IRQ (0x90000000)
+
+/**
+ * struct samsung_wakeup_mask - wakeup mask information
+ * @irq: The interrupt associated with this wakeup.
+ * @bit: The bit, as a (1 << bitno) controlling this source.
+ */ 
+struct samsung_wakeup_mask {
+	unsigned int	irq;
+	u32		bit;
+};
+
+/**
+ * samsung_sync_wakemask - sync wakeup mask information for pm
+ * @reg: The register that is used.
+ * @masks: The list of masks to use.
+ * @nr_masks: The number of entries pointed to buy @masks.
+ *
+ * Synchronise the wakeup mask information at suspend time from the list
+ * of interrupts and control bits in @masks. We do this at suspend time
+ * as overriding the relevant irq chips is harder and the register is only
+ * required to be correct before we enter sleep.
+ */
+extern void samsung_sync_wakemask(void __iomem *reg,
+				  struct samsung_wakeup_mask *masks,
+				  int nr_masks);
+
+#endif /* __PLAT_WAKEUP_MASK_H */

arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -0,0 +1,46 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/clock.h>
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+static inline void arch_wdt_reset(void)
+{
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	if (!IS_ERR(s3c2410_wdtclk))
+		clk_enable(s3c2410_wdtclk);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}

arch/arm/plat-samsung/init.c

@@ -0,0 +1,160 @@
+/* linux/arch/arm/plat-s3c/init.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series CPU initialisation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/regs-serial.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+						struct cpu_table *tab,
+						unsigned int count)
+{
+	for (; count != 0; count--, tab++) {
+		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
+			return tab;
+	}
+
+	return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cputab, unsigned int cputab_size)
+{
+	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+	if (cpu == NULL) {
+		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+		panic("Unknown S3C24XX CPU");
+	}
+
+	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+	if (cpu->map_io == NULL || cpu->init == NULL) {
+		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+		panic("Unsupported Samsung CPU");
+	}
+
+	cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+	if (xtal == 0)
+		xtal = 12*1000*1000;
+
+	if (cpu == NULL)
+		panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+	if (cpu->init_clocks == NULL)
+		panic("s3c24xx_init_clocks: cpu has no clock init\n");
+	else
+		(cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no)
+{
+	struct platform_device *platdev;
+	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+	struct s3c24xx_uart_resources *resp;
+	int uart;
+
+	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+		platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+		resp = res + cfgptr->hwport;
+
+		s3c24xx_uart_devs[uart] = platdev;
+
+		platdev->name = name;
+		platdev->resource = resp->resources;
+		platdev->num_resources = resp->nr_resources;
+
+		platdev->dev.platform_data = cfgptr;
+	}
+
+	nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	if (cpu == NULL)
+		return;
+
+	if (cpu->init_uarts == NULL) {
+		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+	} else
+		(cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+	int ret;
+
+	// do the correct init for cpu
+
+	if (cpu == NULL)
+		panic("s3c_arch_init: NULL cpu\n");
+
+	ret = (cpu->init)();
+	if (ret != 0)
+		return ret;
+
+	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+	return ret;
+}
+
+arch_initcall(s3c_arch_init);

arch/arm/plat-samsung/irq-vic-timer.c

@@ -0,0 +1,98 @@
+/* arch/arm/plat-samsung/irq-vic-timer.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-timer.h>
+
+static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	generic_handle_irq((int)desc->irq_data.handler_data);
+	chained_irq_exit(chip, desc);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+static void s3c_irq_timer_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	u32 mask = (1 << 5) << (d->irq - gc->irq_base);
+
+	irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
+}
+
+/**
+ * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
+ * @num: Number of timers to initialize
+ * @timer_irq: Base IRQ number to be used for the timers.
+ *
+ * Register the necessary IRQ chaining and support for the timer IRQs
+ * chained of the VIC.
+ */
+void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
+{
+	unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+				 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
+	struct irq_chip_generic *s3c_tgc;
+	struct irq_chip_type *ct;
+	unsigned int i;
+
+#ifdef CONFIG_ARCH_EXYNOS
+	if (soc_is_exynos5250()) {
+		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
+		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
+		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
+		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
+		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
+	} else {
+		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
+		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
+		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
+		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
+		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
+	}
+#endif
+	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
+					 S3C64XX_TINT_CSTAT, handle_level_irq);
+
+	if (!s3c_tgc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
+		       __func__, timer_irq);
+		return;
+	}
+
+	ct = s3c_tgc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_ack = s3c_irq_timer_ack;
+	irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	/* Clear the upper bits of the mask_cache*/
+	s3c_tgc->mask_cache &= 0x1f;
+
+	for (i = 0; i < num; i++, timer_irq++) {
+		irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
+		irq_set_handler_data(pirq[i], (void *)timer_irq);
+	}
+}

arch/arm/plat-samsung/platformdata.c

@@ -0,0 +1,60 @@
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev)
+{
+	void *npd;
+
+	if (!pd) {
+		/* too early to use dev_name(), may not be registered */
+		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+		return NULL;
+	}
+
+	npd = kmemdup(pd, pdsize, GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+		return NULL;
+	}
+
+	pdev->dev.platform_data = npd;
+	return npd;
+}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+			     struct s3c_sdhci_platdata *set)
+{
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+	if (pd->max_width)
+		set->max_width = pd->max_width;
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->host_caps2)
+		set->host_caps2 |= pd->host_caps2;
+	if (pd->pm_caps)
+		set->pm_caps |= pd->pm_caps;
+}

arch/arm/plat-samsung/pm-check.c

@@ -0,0 +1,237 @@
+/* linux/arch/arm/plat-s3c/pm-check.c
+ *  originally in linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <plat/pm.h>
+
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_MEM) &&
+		    strcmp(ptr->name, "System RAM") == 0) {
+			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+				  (unsigned long)ptr->start,
+				  (unsigned long)ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)resource_size(res);
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+		  (unsigned long)res->start, (unsigned long)res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @vak: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+	unsigned long addr;
+	unsigned long left;
+	void *stkpage;
+	void *ptr;
+	u32 calc;
+
+	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, stkpage, 4096)) {
+			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+	kfree(crcs);
+	crcs = NULL;
+}
+

arch/arm/plat-samsung/pm-gpio.c

@@ -0,0 +1,384 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_1bit = {
+	.save	= samsung_gpio_pm_1bit_save,
+	.resume = samsung_gpio_pm_1bit_resume,
+};
+
+static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_2bit = {
+	.save	= samsung_gpio_pm_2bit_save,
+	.resume = samsung_gpio_pm_2bit_resume,
+};
+
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
+static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	samsung_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		samsung_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct samsung_gpio_pm samsung_gpio_pm_4bit = {
+	.save	= samsung_gpio_pm_4bit_save,
+	.resume = samsung_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
+
+/**
+ * samsung_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
+{
+	struct samsung_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * samsung_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void samsung_pm_save_gpios(void)
+{
+	struct samsung_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		samsung_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * samsung_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
+{
+	struct samsung_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void samsung_pm_restore_gpios(void)
+{
+	struct samsung_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = samsung_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		samsung_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}

arch/arm/plat-samsung/pm.c

@@ -0,0 +1,376 @@
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-irq.h>
+#include <mach/irqs.h>
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <mach/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsnprintf(buff, sizeof(buff), fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+static inline void s3c_pm_debug_init(void)
+{
+	/* restart uart clocks so we can use them to output */
+	s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
+
+/* Save the UART configurations if we are configured for debug. */
+
+unsigned char pm_uart_udivslot;
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+	save->ucon = __raw_readl(regs + S3C2410_UCON);
+	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+}
+
+static void s3c_pm_save_uarts(void)
+{
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	s3c_pm_arch_update_uart(regs, save);
+
+	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+}
+
+static void s3c_pm_restore_uarts(void)
+{
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_restore_uart(uart, save);
+}
+#else
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int s3c_irqext_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", data->irq);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		__raw_writel(ptr->val, ptr->reg);
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void __maybe_unused s3c_pm_show_resume_irqs(int start,
+						   unsigned long which,
+						   unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+
+void (*pm_cpu_prep)(void);
+int (*pm_cpu_sleep)(unsigned long);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+	int ret;
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s(%d)\n", __func__, state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!of_have_populated_dt() &&
+	    !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	/* save all necessary core registers not covered by the drivers */
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_save_gpios();
+		samsung_pm_saved_gpios();
+	}
+
+	s3c_pm_save_uarts();
+	s3c_pm_save_core();
+
+	/* set the irq configuration for wake */
+
+	s3c_pm_configure_extint();
+
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	s3c_pm_arch_prepare_irqs();
+
+	/* call cpu specific preparation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	s3c_pm_arch_stop_clocks();
+
+	/* this will also act as our return point from when
+	 * we resume as it saves its own register state and restores it
+	 * during the resume.  */
+
+	ret = cpu_suspend(0, pm_cpu_sleep);
+	if (ret)
+		return ret;
+
+	/* restore the system state */
+
+	s3c_pm_restore_core();
+	s3c_pm_restore_uarts();
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_restore_gpios();
+		s3c_pm_restored_gpios();
+	}
+
+	s3c_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	s3c_pm_arch_show_resume_irqs();
+
+	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
+	s3c_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	S3C_PMDBG("S3C PM Resume (post-restore)\n");
+	return 0;
+}
+
+static int s3c_pm_prepare(void)
+{
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+	return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops s3c_pm_ops = {
+	.enter		= s3c_pm_enter,
+	.prepare	= s3c_pm_prepare,
+	.finish		= s3c_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+	suspend_set_ops(&s3c_pm_ops);
+	return 0;
+}

arch/arm/plat-samsung/pwm-clock.c

@@ -0,0 +1,474 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/log2.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+#include <plat/regs-timer.h>
+#include <plat/pwm-clock.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ *			      +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ *			      +---> timer 3
+ *			      \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ *				       [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ *                             [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static struct clk clk_timer_scaler[];
+
+static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
+{
+	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk == &clk_timer_scaler[1]) {
+		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+	}
+
+	return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
+					       unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor = parent_rate / rate;
+
+	if (divisor > 256)
+		divisor = 256;
+	else if (divisor < 2)
+		divisor = 2;
+
+	return parent_rate / divisor;
+}
+
+static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
+	unsigned long tcfg0;
+	unsigned long divisor;
+	unsigned long flags;
+
+	divisor = clk_get_rate(clk->parent) / round;
+	divisor--;
+
+	local_irq_save(flags);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk == &clk_timer_scaler[1]) {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+		tcfg0 |= divisor;
+	}
+
+	__raw_writel(tcfg0, S3C2410_TCFG0);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_pwm_scaler_ops = {
+	.get_rate	= clk_pwm_scaler_get_rate,
+	.set_rate	= clk_pwm_scaler_set_rate,
+	.round_rate	= clk_pwm_scaler_round_rate,
+};
+
+static struct clk clk_timer_scaler[] = {
+	[0]	= {
+		.name		= "pwm-scaler0",
+		.id		= -1,
+		.ops		= &clk_pwm_scaler_ops,
+	},
+	[1]	= {
+		.name		= "pwm-scaler1",
+		.id		= -1,
+		.ops		= &clk_pwm_scaler_ops,
+	},
+};
+
+static struct clk clk_timer_tclk[] = {
+	[0]	= {
+		.name		= "pwm-tclk0",
+		.id		= -1,
+	},
+	[1]	= {
+		.name		= "pwm-tclk1",
+		.id		= -1,
+	},
+};
+
+struct pwm_tdiv_clk {
+	struct clk	clk;
+	unsigned int	divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+	return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (pwm_cfg_src_is_tclk(tcfg1))
+		divisor = to_tdiv(clk)->divisor;
+	else
+		divisor = tcfg_to_divisor(tcfg1);
+
+	return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	unsigned long parent_rate;
+	unsigned long divisor;
+
+	parent_rate = clk_get_rate(clk->parent);
+	divisor = parent_rate / rate;
+
+	if (divisor <= 1 && pwm_tdiv_has_div1())
+		divisor = 1;
+	else if (divisor <= 2)
+		divisor = 2;
+	else if (divisor <= 4)
+		divisor = 4;
+	else if (divisor <= 8)
+		divisor = 8;
+	else
+		divisor = 16;
+
+	return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+	return pwm_tdiv_div_bits(divclk->divisor);
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long bits = clk_pwm_tdiv_bits(divclk);
+	unsigned long flags;
+	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	tcfg1 |= bits << shift;
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	rate = clk_round_rate(clk, rate);
+	divisor = parent_rate / rate;
+
+	if (divisor > 16)
+		return -EINVAL;
+
+	divclk->divisor = divisor;
+
+	/* Update the current MUX settings if we are currently
+	 * selected as the clock source for this clock. */
+
+	if (!pwm_cfg_src_is_tclk(tcfg1))
+		clk_pwm_tdiv_update(divclk);
+
+	return 0;
+}
+
+static struct clk_ops clk_tdiv_ops = {
+	.get_rate	= clk_pwm_tdiv_get_rate,
+	.set_rate	= clk_pwm_tdiv_set_rate,
+	.round_rate	= clk_pwm_tdiv_round_rate,
+};
+
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
+	[0]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.devname	= "s3c24xx-pwm.0",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
+		},
+	},
+	[1]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.devname	= "s3c24xx-pwm.1",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
+		}
+	},
+	[2]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.devname	= "s3c24xx-pwm.2",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+	[3]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.devname	= "s3c24xx-pwm.3",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+	[4]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.devname	= "s3c24xx-pwm.4",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	divclk->clk.id = id;
+	divclk->divisor = tcfg_to_divisor(tcfg1);
+
+	return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+	return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned int id = clk->id;
+	unsigned long tcfg1;
+	unsigned long flags;
+	unsigned long bits;
+	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+	unsigned long mux_tclk;
+
+	if (soc_is_s3c24xx())
+		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
+	else if (soc_is_s5p6440() || soc_is_s5p6450())
+		mux_tclk = 0;
+	else
+		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
+
+	if (parent == s3c24xx_pwmclk_tclk(id))
+		bits = mux_tclk << shift;
+	else if (parent == s3c24xx_pwmclk_tdiv(id))
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_tin_ops = {
+	.set_parent	= clk_pwm_tin_set_parent,
+};
+
+static struct clk clk_tin[] = {
+	[0]	= {
+		.name	= "pwm-tin",
+		.devname	= "s3c24xx-pwm.0",
+		.id	= 0,
+		.ops	= &clk_tin_ops,
+	},
+	[1]	= {
+		.name	= "pwm-tin",
+		.devname	= "s3c24xx-pwm.1",
+		.id	= 1,
+		.ops	= &clk_tin_ops,
+	},
+	[2]	= {
+		.name	= "pwm-tin",
+		.devname	= "s3c24xx-pwm.2",
+		.id	= 2,
+		.ops	= &clk_tin_ops,
+	},
+	[3]	= {
+		.name	= "pwm-tin",
+		.devname	= "s3c24xx-pwm.3",
+		.id	= 3,
+		.ops	= &clk_tin_ops,
+	},
+	[4]	= {
+		.name	= "pwm-tin",
+		.devname	= "s3c24xx-pwm.4",
+		.id	= 4,
+		.ops	= &clk_tin_ops,
+	},
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int id = pwm->id;
+
+	struct clk *parent;
+	int ret;
+
+	ret = s3c24xx_register_clock(pwm);
+	if (ret < 0)
+		return ret;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (pwm_cfg_src_is_tclk(tcfg1))
+		parent = s3c24xx_pwmclk_tclk(id);
+	else
+		parent = s3c24xx_pwmclk_tdiv(id);
+
+	return clk_set_parent(pwm, parent);
+}
+
+/**
+ * s3c_pwmclk_init() - initialise pwm clocks
+ *
+ * Initialise and register the clocks which provide the inputs for the
+ * pwm timer blocks.
+ *
+ * Note, this call is required by the time core, so must be called after
+ * the base clocks are added and before any of the initcalls are run.
+ */
+__init void s3c_pwmclk_init(void)
+{
+	struct clk *clk_timers;
+	unsigned int clk;
+	int ret;
+
+	clk_timers = clk_get(NULL, "timers");
+	if (IS_ERR(clk_timers)) {
+		printk(KERN_ERR "%s: no parent clock\n", __func__);
+		return;
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
+		clk_timer_scaler[clk].parent = clk_timers;
+
+	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
+	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+		ret = clk_pwm_tdiv_register(clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+			return;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+		ret = clk_pwm_tin_register(&clk_tin[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+			return;
+		}
+	}
+}

arch/arm/plat-samsung/s3c-dma-ops.c

@@ -0,0 +1,137 @@
+/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung S3C-DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/export.h>
+
+#include <mach/dma.h>
+
+struct cb_data {
+	void (*fp) (void *);
+	void *fp_param;
+	unsigned ch;
+	struct list_head node;
+};
+
+static LIST_HEAD(dma_list);
+
+static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
+		       int size, enum s3c2410_dma_buffresult res)
+{
+	struct cb_data *data = param;
+
+	data->fp(data->fp_param);
+}
+
+static unsigned s3c_dma_request(enum dma_ch dma_ch,
+				struct samsung_dma_req *param,
+				struct device *dev, char *ch_name)
+{
+	struct cb_data *data;
+
+	if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) {
+		s3c2410_dma_free(dma_ch, param->client);
+		return 0;
+	}
+
+	if (param->cap == DMA_CYCLIC)
+		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
+
+	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
+	data->ch = dma_ch;
+	list_add_tail(&data->node, &dma_list);
+
+	return (unsigned)dma_ch;
+}
+
+static int s3c_dma_release(unsigned ch, void *param)
+{
+	struct cb_data *data;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+	list_del(&data->node);
+
+	s3c2410_dma_free(ch, param);
+	kfree(data);
+
+	return 0;
+}
+
+static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param)
+{
+	s3c2410_dma_devconfig(ch, param->direction, param->fifo);
+	s3c2410_dma_config(ch, param->width);
+
+	return 0;
+}
+
+static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
+{
+	struct cb_data *data;
+	int len = (param->cap == DMA_CYCLIC) ? param->period : param->len;
+
+	list_for_each_entry(data, &dma_list, node)
+		if (data->ch == ch)
+			break;
+
+	if (!data->fp) {
+		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
+		data->fp = param->fp;
+		data->fp_param = param->fp_param;
+	}
+
+	s3c2410_dma_enqueue(ch, (void *)data, param->buf, len);
+
+	return 0;
+}
+
+static inline int s3c_dma_trigger(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
+}
+
+static inline int s3c_dma_started(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
+}
+
+static inline int s3c_dma_flush(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
+}
+
+static inline int s3c_dma_stop(unsigned ch)
+{
+	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
+}
+
+static struct samsung_dma_ops s3c_dma_ops = {
+	.request	= s3c_dma_request,
+	.release	= s3c_dma_release,
+	.config		= s3c_dma_config,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.started	= s3c_dma_started,
+	.flush		= s3c_dma_flush,
+	.stop		= s3c_dma_stop,
+};
+
+void *s3c_dma_get_ops(void)
+{
+	return &s3c_dma_ops;
+}
+EXPORT_SYMBOL(s3c_dma_get_ops);

arch/arm/plat-samsung/s5p-clock.c

@@ -0,0 +1,294 @@
+/*
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+	.rate		= 24000000,
+};
+
+struct clk s5p_clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+	.name		= "fout_bpll",
+	.id		= -1,
+};
+
+struct clk clk_fout_bpll_div2 = {
+	.name		= "fout_bpll_div2",
+	.id		= -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+	.name		= "fout_cpll",
+	.id		= -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+	.name		= "fout_mpll",
+	.id		= -1,
+};
+
+struct clk clk_fout_mpll_div2 = {
+	.name		= "fout_mpll_div2",
+	.id		= -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+	.name		= "fout_dpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+	.name		= "fout_vpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+	[0] = &clk_fin_bpll,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+	.sources	= clk_src_bpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
+};
+
+static struct clk *clk_src_bpll_fout_list[] = {
+	[0] = &clk_fout_bpll_div2,
+	[1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll_fout = {
+	.sources	= clk_src_bpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_bpll_fout_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+	[0] = &clk_fin_cpll,
+	[1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+	.sources	= clk_src_cpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_cpll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clk *clk_src_mpll_fout_list[] = {
+	[0] = &clk_fout_mpll_div2,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll_fout = {
+	.sources	= clk_src_mpll_fout_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_fout_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+	[0] = &clk_fin_dpll,
+	[1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+	.sources	= clk_src_dpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
+};
+
+struct clk clk_vpll = {
+	.name		= "vpll",
+	.id		= -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+	__raw_writel(con, reg);
+	return 0;
+}
+
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+unsigned long s5p_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(pclk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+struct clk_ops s5p_sclk_spdif_ops = {
+	.set_rate	= s5p_spdif_set_rate,
+	.get_rate	= s5p_spdif_get_rate,
+};
+
+static struct clk *s5p_clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_48m,
+	&s5p_clk_27m,
+	&clk_fout_apll,
+	&clk_fout_mpll,
+	&clk_fout_epll,
+	&clk_fout_dpll,
+	&clk_fout_vpll,
+	&clk_vpll,
+	&clk_xusbxti,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+	int ret;
+
+	clk_ext_xtal_mux.rate = xtal_freq;
+
+	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register s5p clocks\n");
+}

arch/arm/plat-samsung/s5p-dev-mfc.c

@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <plat/devs.h>
+#include <plat/mfc.h>
+
+static struct resource s5p_mfc_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_MFC),
+};
+
+struct platform_device s5p_device_mfc = {
+	.name		= "s5p-mfc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
+	.resource	= s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+struct platform_device s5p_device_mfc_l = {
+	.name		= "s5p-mfc-l",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &s5p_device_mfc_l.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device s5p_device_mfc_r = {
+	.name		= "s5p-mfc-r",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &s5p_device_mfc_r.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct s5p_mfc_reserved_mem {
+	phys_addr_t	base;
+	unsigned long	size;
+	struct device	*dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize)
+{
+	int i;
+
+	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+	s5p_mfc_mem[0].base = rbase;
+	s5p_mfc_mem[0].size = rsize;
+
+	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+	s5p_mfc_mem[1].base = lbase;
+	s5p_mfc_mem[1].size = lsize;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (memblock_remove(area->base, area->size)) {
+			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+			area->base = 0;
+		}
+	}
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (!area->base)
+			continue;
+
+		if (dma_declare_coherent_memory(area->dev, area->base,
+				area->base, area->size,
+				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+	}
+	return 0;
+}
+device_initcall(s5p_mfc_memory_init);
+
+#ifdef CONFIG_OF
+int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
+				int depth, void *data)
+{
+	__be32 *prop;
+	unsigned long len;
+	struct s5p_mfc_dt_meminfo *mfc_mem = data;
+
+	if (!data)
+		return 0;
+
+	if (!of_flat_dt_is_compatible(node, mfc_mem->compatible))
+		return 0;
+
+	prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
+	if (!prop || (len != 2 * sizeof(unsigned long)))
+		return 0;
+
+	mfc_mem->loff = be32_to_cpu(prop[0]);
+	mfc_mem->lsize = be32_to_cpu(prop[1]);
+
+	prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
+	if (!prop || (len != 2 * sizeof(unsigned long)))
+		return 0;
+
+	mfc_mem->roff = be32_to_cpu(prop[0]);
+	mfc_mem->rsize = be32_to_cpu(prop[1]);
+
+	return 1;
+}
+#endif

arch/arm/plat-samsung/s5p-dev-uart.c

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2009,2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART0, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART0),
+};
+
+static struct resource s5p_uart1_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART1, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART1),
+};
+
+static struct resource s5p_uart2_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_UART2, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART2),
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[0] = DEFINE_RES_MEM(S5P_PA_UART3, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART3),
+#endif
+};
+
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[0] = DEFINE_RES_MEM(S5P_PA_UART4, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART4),
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[0] = DEFINE_RES_MEM(S5P_PA_UART5, S5P_SZ_UART),
+	[1] = DEFINE_RES_IRQ(IRQ_UART5),
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5p_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5p_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5p_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5p_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
+	},
+	[4] = {
+		.resources	= s5p_uart4_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
+	},
+	[5] = {
+		.resources	= s5p_uart5_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
+	},
+};

arch/arm/plat-samsung/s5p-irq-eint.c

@@ -0,0 +1,217 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+}
+
+static inline void s5p_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_eint_maskack(struct irq_data *data)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(data);
+	s5p_irq_eint_ack(data);
+}
+
+static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.irq_mask	= s5p_irq_eint_mask,
+	.irq_unmask	= s5p_irq_eint_unmask,
+	.irq_mask_ack	= s5p_irq_eint_maskack,
+	.irq_ack	= s5p_irq_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(data);
+
+	s5p_irq_eint_mask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(struct irq_data *data)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(data);
+
+	s5p_irq_eint_unmask(data);
+	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(struct irq_data *data)
+{
+	s5p_irq_vic_eint_mask(data);
+	s5p_irq_vic_eint_ack(data);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.irq_mask	= s5p_irq_vic_eint_mask,
+	.irq_unmask	= s5p_irq_vic_eint_unmask,
+	.irq_mask_ack	= s5p_irq_vic_eint_maskack,
+	.irq_ack	= s5p_irq_vic_eint_ack,
+	.irq_set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+static int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		irq_set_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);

arch/arm/plat-samsung/s5p-irq-gpioint.c

@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#define GPIO_BASE(chip)		((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u))
+
+#define CON_OFFSET		0x700
+#define MASK_OFFSET		0x900
+#define PEND_OFFSET		0xA00
+#define REG_OFFSET(x)		((x) << 2)
+
+struct s5p_gpioint_bank {
+	struct list_head	list;
+	int			start;
+	int			nr_groups;
+	int			irq;
+	struct samsung_gpio_chip	**chips;
+	void			(*handler)(unsigned int, struct irq_desc *);
+};
+
+static LIST_HEAD(banks);
+
+static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	unsigned int shift = (d->irq - gc->irq_base) << 2;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		type = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+	case IRQ_TYPE_NONE:
+	default:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	}
+
+	gc->type_cache &= ~(0x7 << shift);
+	gc->type_cache |= type << shift;
+	writel(gc->type_cache, gc->reg_base + ct->regs.type);
+	return 0;
+}
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
+	int group, pend_offset, mask_offset;
+	unsigned int pend, mask;
+
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+
+	for (group = 0; group < bank->nr_groups; group++) {
+		struct samsung_gpio_chip *chip = bank->chips[group];
+		if (!chip)
+			continue;
+
+		pend_offset = REG_OFFSET(group);
+		pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = REG_OFFSET(group);
+		mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
+		pend &= ~mask;
+
+		while (pend) {
+			int offset = fls(pend) - 1;
+			int real_irq = chip->irq_base + offset;
+			generic_handle_irq(real_irq);
+			pend &= ~BIT(offset);
+		}
+	}
+	chained_irq_exit(chip, desc);
+}
+
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
+{
+	static int used_gpioint_groups = 0;
+	int group = chip->group;
+	struct s5p_gpioint_bank *b, *bank = NULL;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+		return -ENOMEM;
+
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
+			break;
+		}
+	}
+	if (!bank)
+		return -EINVAL;
+
+	if (!bank->handler) {
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
+				      bank->nr_groups, GFP_KERNEL);
+		if (!bank->chips)
+			return -ENOMEM;
+
+		irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
+		irq_set_handler_data(bank->irq, bank);
+		bank->handler = s5p_gpioint_handler;
+		printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
+		       bank->irq);
+	}
+
+	/*
+	 * chained GPIO irq has been successfully registered, allocate new gpio
+	 * int group and assign irq nubmers
+	 */
+	chip->irq_base = S5P_GPIOINT_BASE +
+			 used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+	used_gpioint_groups++;
+
+	bank->chips[group - bank->start] = chip;
+
+	gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
+				    GPIO_BASE(chip),
+				    handle_level_irq);
+	if (!gc)
+		return -ENOMEM;
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = s5p_gpioint_set_type,
+	ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
+	ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
+	ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
+	irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
+	int offset, group;
+	int ret;
+
+	if (!my_chip)
+		return -EINVAL;
+
+	offset = pin - my_chip->chip.base;
+	group = my_chip->group;
+
+	/* check if the group has been already registered */
+	if (my_chip->irq_base)
+		goto success;
+
+	/* register gpio group */
+	ret = s5p_gpioint_add(my_chip);
+	if (ret == 0) {
+		my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+		printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+		       group);
+		goto success;
+	}
+	return ret;
+success:
+	my_chip->bitmap_gpio_int |= BIT(offset);
+
+	return my_chip->irq_base + offset;
+}
+
+int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
+{
+	struct s5p_gpioint_bank *bank;
+
+	bank = kzalloc(sizeof(*bank), GFP_KERNEL);
+	if (!bank)
+		return -ENOMEM;
+
+	bank->start = start;
+	bank->nr_groups = nr_groups;
+	bank->irq = chain_irq;
+
+	list_add_tail(&bank->list, &banks);
+	return 0;
+}

arch/arm/plat-samsung/s5p-irq-pm.c

@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 0x00000006L;
+unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
+
+int s3c_irq_wake(struct irq_data *data, unsigned int state)
+{
+	unsigned long irqbit;
+	unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+	if (soc_is_exynos5250()) {
+		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+	} else {
+		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+	}
+#else
+	irq_rtc_tic = IRQ_RTC_TIC;
+	irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
+
+		if (!state)
+			s3c_irqwake_intmask |= irqbit;
+		else
+			s3c_irqwake_intmask &= ~irqbit;
+	} else {
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static struct sleep_save eint_save[] = {
+	SAVE_ITEM(S5P_EINT_CON(0)),
+	SAVE_ITEM(S5P_EINT_CON(1)),
+	SAVE_ITEM(S5P_EINT_CON(2)),
+	SAVE_ITEM(S5P_EINT_CON(3)),
+
+	SAVE_ITEM(S5P_EINT_FLTCON(0)),
+	SAVE_ITEM(S5P_EINT_FLTCON(1)),
+	SAVE_ITEM(S5P_EINT_FLTCON(2)),
+	SAVE_ITEM(S5P_EINT_FLTCON(3)),
+	SAVE_ITEM(S5P_EINT_FLTCON(4)),
+	SAVE_ITEM(S5P_EINT_FLTCON(5)),
+	SAVE_ITEM(S5P_EINT_FLTCON(6)),
+	SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+	SAVE_ITEM(S5P_EINT_MASK(0)),
+	SAVE_ITEM(S5P_EINT_MASK(1)),
+	SAVE_ITEM(S5P_EINT_MASK(2)),
+	SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(void)
+{
+	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+	return 0;
+}
+
+void s3c24xx_irq_resume(void)
+{
+	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+}
+

arch/arm/plat-samsung/s5p-irq.c

@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+#ifdef CONFIG_ARM_VIC
+	int irq;
+
+	/* initialize the VICs */
+	for (irq = 0; irq < num_vic; irq++)
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
+
+	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}

arch/arm/plat-samsung/s5p-pm.c

@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+	/* nothing here yet */
+}
+

arch/arm/plat-samsung/s5p-sleep.S

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common S5P Sleep Code
+ * Based on S3C64XX sleep code by:
+ *	Ben Dooks, (c) 2008 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CPU_MASK	0xff0ffff0
+#define CPU_CORTEX_A9	0x410fc090
+
+/*
+ *	 The following code is located into the .data section. This is to
+ *	 allow l2x0_regs_phys to be accessed with a relative load while we
+ *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
+ *	 in the .text section as well, but some setups might insist on it to
+ *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+	.data
+	.align
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 */
+
+ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bne	resume_l2on
+	adr	r0, l2x0_regs_phys
+	ldr	r0, [r0]
+	ldr	r1, [r0, #L2X0_R_PHY_BASE]
+	ldr	r2, [r1, #L2X0_CTRL]
+	tst	r2, #0x1
+	bne	resume_l2on
+	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
+	str	r2, [r1, #L2X0_AUX_CTRL]
+	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
+	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
+	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
+	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
+	str	r2, [r1, #L2X0_POWER_CTRL]
+	mov	r2, #1
+	str	r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
+	b	cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	.globl l2x0_regs_phys
+l2x0_regs_phys:
+	.long	0
+#endif

arch/arm/plat-samsung/samsung-time.c

@@ -0,0 +1,394 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * samsung - Common hr-timer support (s3c and s5p)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/sched_clock.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+#include <plat/samsung-time.h>
+
+static struct clk *tin_event;
+static struct clk *tin_source;
+static struct clk *tdiv_event;
+static struct clk *tdiv_source;
+static struct clk *timerclk;
+static struct samsung_timer_source timer_source;
+static unsigned long clock_count_per_tick;
+static void samsung_timer_resume(void);
+
+static void samsung_time_stop(enum samsung_timer_mode mode)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (mode) {
+	case SAMSUNG_PWM0:
+		tcon &= ~S3C2410_TCON_T0START;
+		break;
+
+	case SAMSUNG_PWM1:
+		tcon &= ~S3C2410_TCON_T1START;
+		break;
+
+	case SAMSUNG_PWM2:
+		tcon &= ~S3C2410_TCON_T2START;
+		break;
+
+	case SAMSUNG_PWM3:
+		tcon &= ~S3C2410_TCON_T3START;
+		break;
+
+	case SAMSUNG_PWM4:
+		tcon &= ~S3C2410_TCON_T4START;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	tcnt--;
+
+	switch (mode) {
+	case SAMSUNG_PWM0:
+		tcon &= ~(0x0f << 0);
+		tcon |= S3C2410_TCON_T0MANUALUPD;
+		break;
+
+	case SAMSUNG_PWM1:
+		tcon &= ~(0x0f << 8);
+		tcon |= S3C2410_TCON_T1MANUALUPD;
+		break;
+
+	case SAMSUNG_PWM2:
+		tcon &= ~(0x0f << 12);
+		tcon |= S3C2410_TCON_T2MANUALUPD;
+		break;
+
+	case SAMSUNG_PWM3:
+		tcon &= ~(0x0f << 16);
+		tcon |= S3C2410_TCON_T3MANUALUPD;
+		break;
+
+	case SAMSUNG_PWM4:
+		tcon &= ~(0x07 << 20);
+		tcon |= S3C2410_TCON_T4MANUALUPD;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+
+	__raw_writel(tcnt, S3C2410_TCNTB(mode));
+	__raw_writel(tcnt, S3C2410_TCMPB(mode));
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
+{
+	unsigned long tcon;
+
+	tcon  = __raw_readl(S3C2410_TCON);
+
+	switch (mode) {
+	case SAMSUNG_PWM0:
+		tcon |= S3C2410_TCON_T0START;
+		tcon &= ~S3C2410_TCON_T0MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T0RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T0RELOAD;
+		break;
+
+	case SAMSUNG_PWM1:
+		tcon |= S3C2410_TCON_T1START;
+		tcon &= ~S3C2410_TCON_T1MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T1RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T1RELOAD;
+		break;
+
+	case SAMSUNG_PWM2:
+		tcon |= S3C2410_TCON_T2START;
+		tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T2RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T2RELOAD;
+		break;
+
+	case SAMSUNG_PWM3:
+		tcon |= S3C2410_TCON_T3START;
+		tcon &= ~S3C2410_TCON_T3MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T3RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T3RELOAD;
+		break;
+
+	case SAMSUNG_PWM4:
+		tcon |= S3C2410_TCON_T4START;
+		tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T4RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T4RELOAD;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", mode);
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static int samsung_set_next_event(unsigned long cycles,
+				struct clock_event_device *evt)
+{
+	samsung_time_setup(timer_source.event_id, cycles);
+	samsung_time_start(timer_source.event_id, NON_PERIODIC);
+
+	return 0;
+}
+
+static void samsung_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	samsung_time_stop(timer_source.event_id);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+		samsung_time_start(timer_source.event_id, PERIODIC);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		samsung_timer_resume();
+		break;
+	}
+}
+
+static void samsung_timer_resume(void)
+{
+	/* event timer restart */
+	samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+	samsung_time_start(timer_source.event_id, PERIODIC);
+
+	/* source timer restart */
+	samsung_time_setup(timer_source.source_id, TCNT_MAX);
+	samsung_time_start(timer_source.source_id, PERIODIC);
+}
+
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+				 enum samsung_timer_mode source)
+{
+	s3c_device_timer[event].dev.bus = &platform_bus_type;
+	s3c_device_timer[source].dev.bus = &platform_bus_type;
+
+	timer_source.event_id = event;
+	timer_source.source_id = source;
+}
+
+static struct clock_event_device time_event_device = {
+	.name		= "samsung_event_timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.set_next_event	= samsung_set_next_event,
+	.set_mode	= samsung_set_mode,
+};
+
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction samsung_clock_event_irq = {
+	.name		= "samsung_time_irq",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= samsung_clock_event_isr,
+	.dev_id		= &time_event_device,
+};
+
+static void __init samsung_clockevent_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+	unsigned int irq_number;
+	struct clk *tscaler;
+
+	pclk = clk_get_rate(timerclk);
+
+	tscaler = clk_get_parent(tdiv_event);
+
+	clk_set_rate(tscaler, pclk / TSCALER_DIV);
+	clk_set_rate(tdiv_event, pclk / TDIV);
+	clk_set_parent(tin_event, tdiv_event);
+
+	clock_rate = clk_get_rate(tin_event);
+	clock_count_per_tick = clock_rate / HZ;
+
+	time_event_device.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
+
+	irq_number = timer_source.event_id + IRQ_TIMER0;
+	setup_irq(irq_number, &samsung_clock_event_irq);
+}
+
+static void __iomem *samsung_timer_reg(void)
+{
+	unsigned long offset = 0;
+
+	switch (timer_source.source_id) {
+	case SAMSUNG_PWM0:
+	case SAMSUNG_PWM1:
+	case SAMSUNG_PWM2:
+	case SAMSUNG_PWM3:
+		offset = (timer_source.source_id * 0x0c) + 0x14;
+		break;
+
+	case SAMSUNG_PWM4:
+		offset = 0x40;
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
+		return NULL;
+	}
+
+	return S3C_TIMERREG(offset);
+}
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by U300 implementation.)
+ */
+static u32 notrace samsung_read_sched_clock(void)
+{
+	void __iomem *reg = samsung_timer_reg();
+
+	if (!reg)
+		return 0;
+
+	return ~__raw_readl(reg);
+}
+
+static void __init samsung_clocksource_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+
+	pclk = clk_get_rate(timerclk);
+
+	clk_set_rate(tdiv_source, pclk / TDIV);
+	clk_set_parent(tin_source, tdiv_source);
+
+	clock_rate = clk_get_rate(tin_source);
+
+	samsung_time_setup(timer_source.source_id, TCNT_MAX);
+	samsung_time_start(timer_source.source_id, PERIODIC);
+
+	setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
+
+	if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+			clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+		panic("samsung_clocksource_timer: can't register clocksource\n");
+}
+
+static void __init samsung_timer_resources(void)
+{
+
+	unsigned long event_id = timer_source.event_id;
+	unsigned long source_id = timer_source.source_id;
+	char devname[15];
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get timers clock for timer");
+
+	clk_enable(timerclk);
+
+	sprintf(devname, "s3c24xx-pwm.%lu", event_id);
+	s3c_device_timer[event_id].id = event_id;
+	s3c_device_timer[event_id].dev.init_name = devname;
+
+	tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
+	if (IS_ERR(tin_event))
+		panic("failed to get pwm-tin clock for event timer");
+
+	tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
+	if (IS_ERR(tdiv_event))
+		panic("failed to get pwm-tdiv clock for event timer");
+
+	clk_enable(tin_event);
+
+	sprintf(devname, "s3c24xx-pwm.%lu", source_id);
+	s3c_device_timer[source_id].id = source_id;
+	s3c_device_timer[source_id].dev.init_name = devname;
+
+	tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
+	if (IS_ERR(tin_source))
+		panic("failed to get pwm-tin clock for source timer");
+
+	tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
+	if (IS_ERR(tdiv_source))
+		panic("failed to get pwm-tdiv clock for source timer");
+
+	clk_enable(tin_source);
+}
+
+void __init samsung_timer_init(void)
+{
+	samsung_timer_resources();
+	samsung_clockevent_init();
+	samsung_clocksource_init();
+}

arch/arm/plat-samsung/setup-camif.c

@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+ *
+ * Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+/* Number of camera port pins, without FIELD */
+#define S3C_CAMIF_NUM_GPIOS	13
+
+/* Default camera port configuration helpers. */
+
+static void camif_get_gpios(int *gpio_start, int *gpio_reset)
+{
+#ifdef CONFIG_ARCH_S3C24XX
+	*gpio_start = S3C2410_GPJ(0);
+	*gpio_reset = S3C2410_GPJ(12);
+#else
+	/* s3c64xx */
+	*gpio_start = S3C64XX_GPF(0);
+	*gpio_reset = S3C64XX_GPF(3);
+#endif
+}
+
+int s3c_camif_gpio_get(void)
+{
+	int gpio_start, gpio_reset;
+	int ret, i;
+
+	camif_get_gpios(&gpio_start, &gpio_reset);
+
+	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
+		int gpio = gpio_start + i;
+
+		if (gpio == gpio_reset)
+			continue;
+
+		ret = gpio_request(gpio, "camif");
+		if (!ret)
+			ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		if (ret) {
+			pr_err("failed to configure GPIO %d\n", gpio);
+			for (--i; i >= 0; i--)
+				gpio_free(gpio--);
+			return ret;
+		}
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	return 0;
+}
+
+void s3c_camif_gpio_put(void)
+{
+	int i, gpio_start, gpio_reset;
+
+	camif_get_gpios(&gpio_start, &gpio_reset);
+
+	for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
+		int gpio = gpio_start + i;
+		if (gpio != gpio_reset)
+			gpio_free(gpio);
+	}
+}

arch/arm/plat-samsung/setup-mipiphy.c

@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <mach/regs-clock.h>
+
+static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
+{
+	static DEFINE_SPINLOCK(lock);
+	void __iomem *addr;
+	unsigned long flags;
+	u32 cfg;
+
+	id = max(0, id);
+	if (id > 1)
+		return -EINVAL;
+
+	addr = S5P_MIPI_DPHY_CONTROL(id);
+
+	spin_lock_irqsave(&lock, flags);
+
+	cfg = __raw_readl(addr);
+	cfg = on ? (cfg | reset) : (cfg & ~reset);
+	__raw_writel(cfg, addr);
+
+	if (on) {
+		cfg |= S5P_MIPI_DPHY_ENABLE;
+	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
+			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
+		cfg &= ~S5P_MIPI_DPHY_ENABLE;
+	}
+
+	__raw_writel(cfg, addr);
+	spin_unlock_irqrestore(&lock, flags);
+
+	return 0;
+}
+
+int s5p_csis_phy_enable(int id, bool on)
+{
+	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
+}
+EXPORT_SYMBOL(s5p_csis_phy_enable);
+
+int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
+{
+	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
+}
+EXPORT_SYMBOL(s5p_dsim_phy_enable);

arch/arm/plat-samsung/wakeup-mask.c

@@ -0,0 +1,47 @@
+/* arch/arm/plat-samsung/wakeup-mask.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/wakeup-mask.h>
+#include <plat/pm.h>
+
+void samsung_sync_wakemask(void __iomem *reg,
+			   struct samsung_wakeup_mask *mask, int nr_mask)
+{
+	struct irq_data *data;
+	u32 val;
+
+	val = __raw_readl(reg);
+
+	for (; nr_mask > 0; nr_mask--, mask++) {
+		if (mask->irq == NO_WAKEUP_IRQ) {
+			val |= mask->bit;
+			continue;
+		}
+
+		data = irq_get_irq_data(mask->irq);
+
+		/* bit of a liberty to read this directly from irq_data. */
+		if (irqd_is_wakeup_set(data))
+			val &= ~mask->bit;
+		else
+			val |= mask->bit;
+	}
+
+	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
+	__raw_writel(val, reg);
+}