Initial commit; kernel source import

arch/arm/mach-imx/3ds_debugboard.c

@@ -0,0 +1,213 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+#include "hardware.h"
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n)	(n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n)	(n + 0x8000)
+#define UARTB_BASE_ADDR(n)	(n + 0x10000)
+
+#define BOARD_IO_ADDR(n)	(n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG		0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG	0x08
+/* status, interrupt */
+#define INTR_STATUS_REG	0x10
+#define INTR_MASK_REG		0x38
+#define INTR_RESET_REG		0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG	0x40
+#define MAGIC_NUMBER2_REG	0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG	0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG	0x58
+/* module reset register*/
+#define MODULE_RESET_REG	0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG	0x68
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET		0
+#define EXPIO_INT_XUART_A	1
+#define EXPIO_INT_XUART_B	2
+#define EXPIO_INT_BUTTON_A	3
+#define EXPIO_INT_BUTTON_B	4
+
+static void __iomem *brd_io;
+static struct irq_domain *domain;
+
+static struct resource smsc911x_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	} , {
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+	.name = "smsc911x",
+	.id = -1,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	/* irq = gpio irq number */
+	desc->irq_data.chip->irq_mask(&desc->irq_data);
+
+	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+	expio_irq = 0;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(irq_find_mapping(domain, expio_irq));
+	}
+
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(struct irq_data *d)
+{
+	u16 reg;
+	u32 expio = d->hwirq;
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg |= (1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(struct irq_data *d)
+{
+	u32 expio = d->hwirq;
+
+	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	expio_mask_irq(d);
+}
+
+static void expio_unmask_irq(struct irq_data *d)
+{
+	u16 reg;
+	u32 expio = d->hwirq;
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.irq_ack = expio_ack_irq,
+	.irq_mask = expio_mask_irq,
+	.irq_unmask = expio_unmask_irq,
+};
+
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
+int __init mxc_expio_init(u32 base, u32 intr_gpio)
+{
+	u32 p_irq = gpio_to_irq(intr_gpio);
+	int irq_base;
+	int i;
+
+	brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+	if (brd_io == NULL)
+		return -ENOMEM;
+
+	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		pr_info("3-Stack Debug board not detected\n");
+		iounmap(brd_io);
+		brd_io = NULL;
+		return -ENODEV;
+	}
+
+	pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+		readw(brd_io + CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	gpio_request(intr_gpio, "expio_pirq");
+	gpio_direction_input(intr_gpio);
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0, brd_io + INTR_MASK_REG);
+	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+
+	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+	WARN_ON(irq_base < 0);
+
+	domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+				       &irq_domain_simple_ops, NULL);
+	WARN_ON(!domain);
+
+	for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
+		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+	irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
+
+	/* Register Lan device on the debugboard */
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+	smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
+	smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
+	platform_device_register(&smsc_lan9217_device);
+
+	return 0;
+}

arch/arm/mach-imx/3ds_debugboard.h

@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_3DS_DB_H__
+#define __ASM_ARCH_MXC_3DS_DB_H__
+
+extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
+
+#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */

arch/arm/mach-imx/Kconfig

@@ -0,0 +1,823 @@
+config ARCH_MXC
+	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_ALLOCATOR
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+	depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+	bool "Use IRQ priority"
+	help
+	  Select this if you want to use prioritized IRQ handling.
+	  This feature prevents higher priority ISR to be interrupted
+	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  This may be useful in embedded applications, where are strong
+	  requirements for timing.
+	  Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+	bool
+
+config MXC_AVIC
+	bool
+
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
+config MXC_ULPI
+	bool
+
+config ARCH_HAS_RNGA
+	bool
+
+config HAVE_IMX_ANATOP
+	bool
+
+config HAVE_IMX_GPC
+	bool
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	def_bool y if SMP
+	select ARCH_HAS_RESET_CONTROLLER
+
+config IMX_HAVE_IOMUX_V1
+	bool
+
+config ARCH_MXC_IOMUX_V3
+	bool
+
+config ARCH_MX1
+	bool
+
+config ARCH_MX25
+	bool
+
+config MACH_MX27
+	bool
+
+config SOC_IMX1
+	bool
+	select ARCH_MX1
+	select COMMON_CLK
+	select CPU_ARM920T
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+config SOC_IMX21
+	bool
+	select COMMON_CLK
+	select CPU_ARM926T
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+config SOC_IMX25
+	bool
+	select ARCH_MX25
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_ARM926T
+	select HAVE_CAN_FLEXCAN if CAN
+	select MXC_AVIC
+
+config SOC_IMX27
+	bool
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select COMMON_CLK
+	select CPU_ARM926T
+	select IMX_HAVE_IOMUX_V1
+	select MACH_MX27
+	select MXC_AVIC
+
+config SOC_IMX31
+	bool
+	select COMMON_CLK
+	select CPU_V6
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select MXC_AVIC
+	select SMP_ON_UP if SMP
+
+config SOC_IMX35
+	bool
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_V6K
+	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_EPIT
+	select MXC_AVIC
+	select SMP_ON_UP if SMP
+
+config SOC_IMX5
+	bool
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_V7
+	select MXC_TZIC
+
+config	SOC_IMX51
+	bool
+	select HAVE_IMX_SRC
+	select PINCTRL
+	select PINCTRL_IMX51
+	select SOC_IMX5
+
+if ARCH_MULTI_V4T
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select MACH_MXLADS
+	select SOC_IMX1
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+config MACH_APF9328
+	bool "APF9328"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
+	help
+	  Say Yes here if you are using the Armadeus APF9328 development board
+
+endif
+
+if ARCH_MULTI_V5
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+	bool "Support MX25PDK (3DS) Platform"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX25
+
+config MACH_EUKREA_CPUIMX25SD
+	bool "Support Eukrea CPUIMX25 Platform"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX25
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25SD
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_IMX25_DT
+	bool "Support i.MX25 platforms from device tree"
+	select SOC_IMX25
+	help
+	  Include support for Freescale i.MX25 based platforms
+	  using the device tree for discovery
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select SOC_IMX27
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM038
+	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_PCM038
+	default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+	bool "PHYTEC PCM970 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	help
+	  This adds board specific devices that can be found on Phytec's
+	  PCM970 evaluation board.
+
+endchoice
+
+config MACH_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_CPUIMX27
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27
+	  for wifi or eMMC.
+
+config MACH_EUKREA_CPUIMX27_USEUART4
+	bool "CPUIMX27 integrates UART4 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal UART4 used on CPUIMX27
+	  for bluetooth.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	bool "Eukrea MBIMX27 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27_VISSTRIM_M10
+	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MX2_EMMA
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select LEDS_GPIO_REGISTER
+	select SOC_IMX27
+	help
+	  Include support for Visstrim_m10 platform and its different variants.
+	  This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_IMX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX27
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_IMX27IPCAM
+	bool "IMX27 IPCAM platform"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
+	help
+	  Include support for IMX27 IPCAM platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27_DT
+	bool "Support i.MX27 platforms from device tree"
+	select SOC_IMX27
+	help
+	  Include support for Freescale i.MX27 based platforms
+	  using the device tree for discovery
+
+endif
+
+if ARCH_MULTI_V6
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	default y
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350 = y
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	default y
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX31_DT
+	bool "Support i.MX31 platforms from device tree"
+	select SOC_IMX31
+	help
+	  Include support for Freescale i.MX31 based platforms
+	  using the device tree for discovery.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_DEBUG_BOARD
+	select SOC_IMX35
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35SD
+	bool "Support Eukrea CPUIMX35 Platform"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35SD
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX35
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
+
+if ARCH_MULTI_V7
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+	bool "Support i.MX51 platforms from device tree"
+	select SOC_IMX51
+	help
+	  Include support for Freescale i.MX51 based platforms
+	  using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+comment "Device tree only"
+
+config	SOC_IMX53
+	bool "i.MX53 support"
+	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_IMX_SRC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select PINCTRL
+	select PINCTRL_IMX53
+	select SOC_IMX5
+
+	help
+	  This enables support for Freescale i.MX53 processor.
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad/DualLite support"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select COMMON_CLK
+	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_IMX_ANATOP
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select HAVE_SMP
+	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_IMX6Q
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+	select PM_OPP if PM
+
+	help
+	  This enables support for Freescale i.MX6 Quad processor.
+
+endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu

arch/arm/mach-imx/Makefile

@@ -0,0 +1,114 @@
+obj-y := time.o cpu.o system.o irq-common.o
+
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
+
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
+
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
+
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+			    clk-pfd.o clk-busy.o clk.o
+
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
+
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+
+ifeq ($(CONFIG_CPU_IDLE),y)
+obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
+obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
+endif
+
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+# i.MX1 based machines
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
+
+# i.MX21 based machines
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
+# i.MX25 based machines
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
+
+# i.MX27 based machines
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
+obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+		mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
+
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+endif
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
+
+obj-y += devices/

arch/arm/mach-imx/anatop.c

@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include "common.h"
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define ANADIG_REG_2P5		0x130
+#define ANADIG_REG_CORE		0x140
+#define ANADIG_ANA_MISC0	0x150
+#define ANADIG_USB1_CHRG_DETECT	0x1b0
+#define ANADIG_USB2_CHRG_DETECT	0x210
+#define ANADIG_DIGPROG		0x260
+
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
+#define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	0x1000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
+
+static struct regmap *anatop;
+
+static void imx_anatop_enable_weak2p5(bool enable)
+{
+	u32 reg, val;
+
+	regmap_read(anatop, ANADIG_ANA_MISC0, &val);
+
+	/* can only be enabled when stop_mode_config is clear. */
+	reg = ANADIG_REG_2P5;
+	reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
+		REG_SET : REG_CLR;
+	regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
+}
+
+static void imx_anatop_enable_fet_odrive(bool enable)
+{
+	regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
+		BM_ANADIG_REG_CORE_FET_ODRIVE);
+}
+
+void imx_anatop_pre_suspend(void)
+{
+	imx_anatop_enable_weak2p5(true);
+	imx_anatop_enable_fet_odrive(true);
+}
+
+void imx_anatop_post_resume(void)
+{
+	imx_anatop_enable_fet_odrive(false);
+	imx_anatop_enable_weak2p5(false);
+}
+
+void imx_anatop_usb_chrg_detect_disable(void)
+{
+	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B
+		| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+	regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B |
+		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+}
+
+u32 imx_anatop_get_digprog(void)
+{
+	struct device_node *np;
+	void __iomem *anatop_base;
+	static u32 digprog;
+
+	if (digprog)
+		return digprog;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+	anatop_base = of_iomap(np, 0);
+	WARN_ON(!anatop_base);
+	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+
+	return digprog;
+}
+
+void __init imx_anatop_init(void)
+{
+	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	if (IS_ERR(anatop)) {
+		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
+		return;
+	}
+}

arch/arm/mach-imx/avic.c

@@ -0,0 +1,224 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "irq-common.h"
+
+#define AVIC_INTCNTL		0x00	/* int control reg */
+#define AVIC_NIMASK		0x04	/* int mask reg */
+#define AVIC_INTENNUM		0x08	/* int enable number reg */
+#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
+#define AVIC_INTENABLEH		0x10	/* int enable reg high */
+#define AVIC_INTENABLEL		0x14	/* int enable reg low */
+#define AVIC_INTTYPEH		0x18	/* int type reg high */
+#define AVIC_INTTYPEL		0x1C	/* int type reg low */
+#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR		0x40	/* norm int vector/status */
+#define AVIC_FIVECSR		0x44	/* fast int vector/status */
+#define AVIC_INTSRCH		0x48	/* int source reg high */
+#define AVIC_INTSRCL		0x4C	/* int source reg low */
+#define AVIC_INTFRCH		0x50	/* int force reg high */
+#define AVIC_INTFRCL		0x54	/* int force reg low */
+#define AVIC_NIPNDH		0x58	/* norm int pending high */
+#define AVIC_NIPNDL		0x5C	/* norm int pending low */
+#define AVIC_FIPNDH		0x60	/* fast int pending high */
+#define AVIC_FIPNDL		0x64	/* fast int pending low */
+
+#define AVIC_NUM_IRQS 64
+
+static void __iomem *avic_base;
+static struct irq_domain *domain;
+
+#ifdef CONFIG_MXC_IRQ_PRIOR
+static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	unsigned int temp;
+	unsigned int mask = 0x0F << irq % 8 * 4;
+
+	irq = d->hwirq;
+
+	if (irq >= AVIC_NUM_IRQS)
+		return -EINVAL;
+
+	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
+	temp &= ~mask;
+	temp |= prio & mask;
+
+	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FIQ
+static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	unsigned int irqt;
+
+	irq = d->hwirq;
+
+	if (irq >= AVIC_NUM_IRQS)
+		return -EINVAL;
+
+	if (irq < AVIC_NUM_IRQS / 2) {
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+	} else {
+		irq -= AVIC_NUM_IRQS / 2;
+		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FIQ */
+
+
+static struct mxc_extra_irq avic_extra_irq = {
+#ifdef CONFIG_MXC_IRQ_PRIOR
+	.set_priority = avic_irq_set_priority,
+#endif
+#ifdef CONFIG_FIQ
+	.set_irq_fiq = avic_set_irq_fiq,
+#endif
+};
+
+#ifdef CONFIG_PM
+static u32 avic_saved_mask_reg[2];
+
+static void avic_irq_suspend(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	int idx = d->hwirq >> 5;
+
+	avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
+	__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+}
+
+static void avic_irq_resume(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = gc->chip_types;
+	int idx = d->hwirq >> 5;
+
+	__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+}
+
+#else
+#define avic_irq_suspend NULL
+#define avic_irq_resume NULL
+#endif
+
+static __init void avic_init_gc(int idx, unsigned int irq_start)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
+				    handle_level_irq);
+	gc->private = &avic_extra_irq;
+	gc->wake_enabled = IRQ_MSK(32);
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+	ct->chip.irq_ack = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->chip.irq_suspend = avic_irq_suspend;
+	ct->chip.irq_resume = avic_irq_resume;
+	ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
+	ct->regs.ack = ct->regs.mask;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+{
+	u32 nivector;
+
+	do {
+		nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+		if (nivector == 0xffff)
+			break;
+
+		handle_IRQ(irq_find_mapping(domain, nivector), regs);
+	} while (1);
+}
+
+/*
+ * This function initializes the AVIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init mxc_init_irq(void __iomem *irqbase)
+{
+	struct device_node *np;
+	int irq_base;
+	int i;
+
+	avic_base = irqbase;
+
+	/* put the AVIC into the reset value with
+	 * all interrupts disabled
+	 */
+	__raw_writel(0, avic_base + AVIC_INTCNTL);
+	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
+
+	/* disable all interrupts */
+	__raw_writel(0, avic_base + AVIC_INTENABLEH);
+	__raw_writel(0, avic_base + AVIC_INTENABLEL);
+
+	/* all IRQ no FIQ */
+	__raw_writel(0, avic_base + AVIC_INTTYPEH);
+	__raw_writel(0, avic_base + AVIC_INTTYPEL);
+
+	irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
+	WARN_ON(irq_base < 0);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+	domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
+				       &irq_domain_simple_ops, NULL);
+	WARN_ON(!domain);
+
+	for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
+		avic_init_gc(i, irq_base);
+
+	/* Set default priority value (0) for all IRQ's */
+	for (i = 0; i < 8; i++)
+		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ(FIQ_START);
+#endif
+
+	printk(KERN_INFO "MXC IRQ initialized\n");
+}

arch/arm/mach-imx/board-mx31lilly.h

@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LILLY_NOBOARD	= 0,
+	MX31LILLY_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls the baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */

arch/arm/mach-imx/board-mx31lite.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31lite_boards {
+	MX31LITE_NOBOARD	= 0,
+	MX31LITE_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls the baseboard's init function.
+ */
+
+extern void mx31lite_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */

arch/arm/mach-imx/board-mx31moboard.h

@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31moboard_boards {
+	MX31NOBOARD	= 0,
+	MX31DEVBOARD	= 1,
+	MX31MARXBOT	= 2,
+	MX31SMARTBOT	= 3,
+	MX31EYEBOT	= 4,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls the baseboard's init function.
+ */
+
+extern void mx31moboard_devboard_init(void);
+extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(int board);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */

arch/arm/mach-imx/board-pcm038.h

@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
+#define __ASM_ARCH_MXC_BOARD_PCM038_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls the baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside pcm038_init().
+ *
+ * This example here is for the development board. Refer pcm970-baseboard.c
+ */
+
+extern void pcm970_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */

arch/arm/mach-imx/clk-busy.c

@@ -0,0 +1,189 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	while (readl_relaxed(reg) & (1 << shift))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+struct clk_busy_divider {
+	struct clk_divider div;
+	const struct clk_ops *div_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+	struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+	return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+	int ret;
+
+	ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+	.recalc_rate = clk_busy_divider_recalc_rate,
+	.round_rate = clk_busy_divider_round_rate,
+	.set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift)
+{
+	struct clk_busy_divider *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->div.reg = reg;
+	busy->div.shift = shift;
+	busy->div.width = width;
+	busy->div.lock = &imx_ccm_lock;
+	busy->div_ops = &clk_divider_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_divider_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	busy->div.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->div.hw);
+	if (IS_ERR(clk))
+		kfree(busy);
+
+	return clk;
+}
+
+struct clk_busy_mux {
+	struct clk_mux mux;
+	const struct clk_ops *mux_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+	return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+	return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+	int ret;
+
+	ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+static struct clk_ops clk_busy_mux_ops = {
+	.get_parent = clk_busy_mux_get_parent,
+	.set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents)
+{
+	struct clk_busy_mux *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->mux.reg = reg;
+	busy->mux.shift = shift;
+	busy->mux.mask = BIT(width) - 1;
+	busy->mux.lock = &imx_ccm_lock;
+	busy->mux_ops = &clk_mux_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_mux_ops;
+	init.flags = 0;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	busy->mux.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->mux.hw);
+	if (IS_ERR(clk))
+		kfree(busy);
+
+	return clk;
+}

arch/arm/mach-imx/clk-gate2.c

@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include "clk.h"
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent.  No clk_set_rate support
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg |= 3 << gate->bit_idx;
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg &= ~(3 << gate->bit_idx);
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	reg = readl(gate->reg);
+
+	if (((reg >> gate->bit_idx) & 3) == 3)
+		return 1;
+
+	return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+	.enable = clk_gate2_enable,
+	.disable = clk_gate2_disable,
+	.is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate2_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	/* struct clk_gate assignments */
+	gate->reg = reg;
+	gate->bit_idx = bit_idx;
+	gate->flags = clk_gate2_flags;
+	gate->lock = lock;
+
+	init.name = name;
+	init.ops = &clk_gate2_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->hw.init = &init;
+
+	clk = clk_register(dev, &gate->hw);
+	if (IS_ERR(clk))
+		kfree(gate);
+
+	return clk;
+}

arch/arm/mach-imx/clk-imx1.c

@@ -0,0 +1,115 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+/* CCM register addresses */
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+/* SCM register addresses */
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
+				"fclk", };
+enum imx1_clks {
+	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
+	fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
+	mma_gate, usbd_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[clk32] = imx_clk_fixed("clk32", fref);
+	clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
+	clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+	clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
+			ARRAY_SIZE(prem_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
+	clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
+	clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
+	clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
+	clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
+	clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
+			ARRAY_SIZE(clko_sel_clks));
+	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx1 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
+	clk_register_clkdev(clk[mma_gate], "mma", NULL);
+	clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
+	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+	clk_register_clkdev(clk[hclk], "mshc", NULL);
+	clk_register_clkdev(clk[per3], "ssi", NULL);
+	clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
+	clk_register_clkdev(clk[clko], "clko", NULL);
+
+	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
+
+	return 0;
+}

arch/arm/mach-imx/clk-imx21.c

@@ -0,0 +1,185 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+static const char *mpll_sel_clks[] = { "fpm", "ckih", };
+static const char *spll_sel_clks[] = { "fpm", "ckih", };
+
+enum imx21_clks {
+	ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
+	per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
+	uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
+	pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
+	lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
+	per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
+	ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
+	emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
+	gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	int i;
+
+	clk[ckil] = imx_clk_fixed("ckil", lref);
+	clk[ckih] = imx_clk_fixed("ckih", href);
+	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+			ARRAY_SIZE(mpll_sel_clks));
+	clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
+			ARRAY_SIZE(spll_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
+	clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+	clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+	clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
+	clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
+	clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
+	clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
+	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+	clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
+	clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+	clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+	clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
+	clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+	clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+	clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+	clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+	clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+	clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
+	clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+	clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+	clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+	clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+	clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+	clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+	clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX21 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[per1], "per1", NULL);
+	clk_register_clkdev(clk[per2], "per2", NULL);
+	clk_register_clkdev(clk[per3], "per3", NULL);
+	clk_register_clkdev(clk[per4], "per4", NULL);
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
+	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
+	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
+	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
+	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
+	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
+	clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
+	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
+	clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
+	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
+	clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[brom_gate], "brom", NULL);
+	clk_register_clkdev(clk[emma_gate], "emma", NULL);
+	clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
+	clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
+	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+	clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
+	clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
+	clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+
+	mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
+	return 0;
+}

arch/arm/mach-imx/clk-imx25.c

@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+#include "mx25.h"
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+#define CCM_MCR		0x64
+
+#define ccm(x)	(CRM_BASE + (x))
+
+static struct clk_onecell_data clk_data;
+
+static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
+static const char *per_sel_clks[] = { "ahb", "upll", };
+
+enum mx25_clks {
+	dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
+	per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
+	per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
+	per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
+	per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
+	csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
+	gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
+	pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
+	uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
+	esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
+	reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg,	csi_ipg,
+	cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
+	reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
+	gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
+	iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
+	pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
+	sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
+	uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
+	wdt_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+static int __init __mx25_clocks_init(unsigned long osc_rate)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[osc] = imx_clk_fixed("osc", osc_rate);
+	clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
+	clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
+	clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
+	clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+	clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
+	clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
+	clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6); 
+	clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+	clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+	clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
+	clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
+	clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
+	clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
+	clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
+	clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
+	clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
+	clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
+	clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
+	clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
+	clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
+	clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
+	clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
+	clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
+	clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
+	clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
+	clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+	clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0),  1);
+	clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0),  2);
+	clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0),  3);
+	clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0),  4);
+	clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0),  5);
+	clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0),  6);
+	clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0),  7);
+	clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0),  8);
+	clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0),  9);
+	clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0),  10);
+	clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0),  11);
+	clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0),  12);
+	clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
+	clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
+	clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+	clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
+	/* CCM_CGCR0(17): reserved */
+	clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+	clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
+	clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
+	clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
+	clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
+	clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
+	clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+	clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
+	clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+	clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
+	clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+	/* CCM_CGCR0(29-31): reserved */
+	/* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
+	clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1),  2);
+	clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1),  3);
+	clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1),  4);
+	clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1),  5);
+	clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1),  6);
+	clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1),  7);
+	clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1),  8);
+	clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1),  9);
+	clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1),  10);
+	clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1),  11);
+	/* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
+	clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
+	clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
+	clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+	/* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
+	/* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
+	/* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
+	clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
+	clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
+	clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
+	clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
+	/* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
+	/* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
+	/* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
+	clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+	/* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
+	/* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
+	clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
+	clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+	/* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
+	clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
+	clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2),  0);
+	clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2),  1);
+	clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2),  2);
+	clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2),  3);
+	/* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
+	clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2),  5);
+	clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2),  6);
+	clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2),  7);
+	clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2),  8);
+	clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2),  9);
+	clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2),  10);
+	clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
+	clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
+	clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
+	clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
+	clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
+	clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
+	clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
+	clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+	/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
+	clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX25 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_prepare_enable(clk[emi_ahb]);
+
+	/* Clock source for gpt must be derived from AHB */
+	clk_set_parent(clk[per5_sel], clk[ahb]);
+
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+
+	return 0;
+}
+
+int __init mx25_clocks_init(void)
+{
+	__mx25_clocks_init(24000000);
+
+	/* i.mx25 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
+	/* i.mx25 has the i.mx35 type cspi */
+	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
+	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
+	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
+	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
+	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
+	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
+	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
+	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
+	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
+	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
+	clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
+	clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
+	clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
+	clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
+	clk_register_clkdev(clk[dummy], "audmux", NULL);
+	clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
+	clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
+	/* i.mx25 has the i.mx35 type sdma */
+	clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
+	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
+	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
+
+	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
+
+	return 0;
+}
+
+int __init mx25_clocks_init_dt(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int irq;
+	unsigned long osc_rate = 24000000;
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-osc"))
+			osc_rate = rate;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	__mx25_clocks_init(osc_rate);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+
+	mxc_timer_init(base, irq);
+
+	return 0;
+}

arch/arm/mach-imx/clk-imx27.c

@@ -0,0 +1,316 @@
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
+static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
+static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
+static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", };
+static const char *clko_sel_clks[] = {
+	"ckil", "fpm", "ckih", "ckih",
+	"ckih", "mpll", "spll", "cpu_div",
+	"ahb", "ipg", "per1_div", "per2_div",
+	"per3_div", "per4_div", "ssi1_div", "ssi2_div",
+	"nfc_div", "mshc_div", "vpu_div", "60m",
+	"32k", "usb_div", "dptc",
+};
+
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
+
+enum mx27_clks {
+	dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
+	per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
+	clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
+	clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
+	sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
+	rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
+	kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
+	gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
+	gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
+	emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
+	cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
+	vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
+	usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
+	vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
+	csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
+	uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
+	uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
+	mpll_sel, spll_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+	int i;
+	struct device_node *np;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[ckih] = imx_clk_fixed("ckih", fref);
+	clk[ckil] = imx_clk_fixed("ckil", 32768);
+	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+	clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3);
+
+	clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1,
+			mpll_osc_sel_clks,
+			ARRAY_SIZE(mpll_osc_sel_clks));
+	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+			ARRAY_SIZE(mpll_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
+	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+	clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+		clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+	} else {
+		clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+		clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+	}
+
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+	clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+	clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+	clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+	clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+	clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+	clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+	clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+	else
+		clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+	clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+	clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+	clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+	clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+	clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+	clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+	clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+	clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+	clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+	clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+	clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+	clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+	clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+	clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+	clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+	clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+	clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+	clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+	clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+	clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1,  3);
+	clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1,  4);
+	clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1,  5);
+	clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1,  6);
+	clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1,  7);
+	clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1,  8);
+	clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1,  9);
+	clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+	clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+	clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+	clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+	clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+	clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+	clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+	clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+	clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+	clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+	clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+	clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+	clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+	clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+	clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX27 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+	if (np) {
+		clk_data.clks = clk;
+		clk_data.clk_num = ARRAY_SIZE(clk);
+		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	}
+
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
+	clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
+	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
+	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
+	clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
+	clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
+	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
+	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
+	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
+	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
+	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
+	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
+	clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
+	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
+	clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
+	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
+	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
+	clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
+	clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
+	clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
+	clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
+	clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
+	clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
+	clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
+	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
+	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
+	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
+	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
+	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
+	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
+	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
+	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
+	clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
+
+	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
+
+	clk_prepare_enable(clk[emi_ahb_gate]);
+
+	imx_print_silicon_rev("i.MX27", mx27_revision());
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+int __init mx27_clocks_init_dt(void)
+{
+	struct device_node *np;
+	u32 fref = 26000000; /* default */
+
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+			continue;
+
+		if (!of_property_read_u32(np, "clock-frequency", &fref))
+			break;
+	}
+
+	return mx27_clocks_init(fref);
+}
+#endif

arch/arm/mach-imx/clk-imx31.c

@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include "common.h"
+#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "mx31.h"
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+	dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg,
+	per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+	fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+	iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+	uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+	mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+	sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+	uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+	gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+	int i;
+	struct device_node *np;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[ckih] = imx_clk_fixed("ckih", fref);
+	clk[ckil] = imx_clk_fixed("ckil", 32768);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
+	clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
+	clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
+	clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+	clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+	clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+	clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+	clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+	clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+	clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+	clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+	clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+	clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+	clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+	clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+	clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+	clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+	clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+	clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+	clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+	clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+	clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+	clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+	clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+	clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+	clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+	clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+	clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+	clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+	clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+	clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+	clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+	clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+	clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+	clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+	clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+	clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+	clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+	clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+	clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+	clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+	clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+	clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+	clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+	clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx31 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+
+	if (np) {
+		clk_data.clks = clk;
+		clk_data.clk_num = ARRAY_SIZE(clk);
+		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	}
+
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+	clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
+	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+	clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
+	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	/* i.mx31 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
+	clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[firi_gate], "firi", NULL);
+	clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+	clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+	clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+	clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+	clk_set_parent(clk[csi], clk[upll]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	mx31_revision();
+	clk_disable_unprepare(clk[iim_gate]);
+
+	mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+int __init mx31_clocks_init_dt(void)
+{
+	struct device_node *np;
+	u32 fref = 26000000; /* default */
+
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+			continue;
+
+		if (!of_property_read_u32(np, "clock-frequency", &fref))
+			break;
+	}
+
+	return mx31_clocks_init(fref);
+}
+#endif

arch/arm/mach-imx/clk-imx35.c

@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include "crmregs-imx3.h"
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+struct arm_ahb_div {
+	unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+	{ .arm = 1, .ahb = 4, .sel = 0},
+	{ .arm = 1, .ahb = 3, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 1, .sel = 0},
+	{ .arm = 1, .ahb = 5, .sel = 0},
+	{ .arm = 1, .ahb = 8, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 1},
+	{ .arm = 2, .ahb = 4, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+static const char *std_sel[] = {"ppll", "arm"};
+static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
+
+enum mx35_clks {
+	ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+	arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+	esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+	spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+	ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+	audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+	edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+	esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+	gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+	kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+	rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+	ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+	wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
+	gpu2d_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx35_clocks_init(void)
+{
+	void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+	u32 pdr0, consumer_sel, hsp_sel;
+	struct arm_ahb_div *aad;
+	unsigned char *hsp_div;
+	u32 i;
+
+	pdr0 = __raw_readl(base + MXC_CCM_PDR0);
+	consumer_sel = (pdr0 >> 16) & 0xf;
+	aad = &clk_consumer[consumer_sel];
+	if (!aad->arm) {
+		pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+		/*
+		 * We are basically stuck. Continue with a default entry and hope we
+		 * get far enough to actually show the above message
+		 */
+		aad = &clk_consumer[0];
+	}
+
+	clk[ckih] = imx_clk_fixed("ckih", 24000000);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL);
+	clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL);
+
+	clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+	if (aad->sel)
+		clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+	else
+		clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+	if (clk_get_rate(clk[arm]) > 400000000)
+		hsp_div = hsp_div_532;
+	else
+		hsp_div = hsp_div_400;
+
+	hsp_sel = (pdr0 >> 20) & 0x3;
+	if (!hsp_div[hsp_sel]) {
+		pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+		hsp_sel = 0;
+	}
+
+	clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+	clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+	clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+	clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
+	clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
+	clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+	clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
+
+	clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
+	clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
+	clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
+
+	clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */ 
+	clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
+
+	clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
+	clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
+	clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
+	clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
+
+	clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
+
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+
+	clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
+
+	clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0,  0);
+	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0,  2);
+	clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0,  4);
+	clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0,  6);
+	clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0,  8);
+	clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
+	clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
+	clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
+	clk[edio_gate] = imx_clk_gate2("edio_gate",   "ipg", base + MX35_CCM_CGR0, 16);
+	clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
+	clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
+	clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
+	clk[esai_gate] = imx_clk_gate2("esai_gate",   "ipg", base + MX35_CCM_CGR0, 24);
+	clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
+	clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
+	clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
+
+	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1,  0);
+	clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1,  2);
+	clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1,  4);
+	clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1,  6);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1,  8);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
+	clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
+	clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
+	clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
+	clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
+	clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
+	clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
+
+	clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2,  0);
+	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2,  2);
+	clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2,  4);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2,  6);
+	clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2,  8);
+	clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
+	clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
+	clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
+	clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
+	clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
+	clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
+	clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
+	clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
+	clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
+	clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
+
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3,  0);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3,  2);
+	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3,  4);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX35 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
+	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
+	clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
+	clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
+	clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
+	clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
+	clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
+	clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
+	clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
+	clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
+	clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
+	clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
+	clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
+	/* i.mx35 has the i.mx27 type fec */
+	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
+	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+	/* i.mx35 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	clk_register_clkdev(clk[admux_gate], "audmux", NULL);
+
+	clk_prepare_enable(clk[spba_gate]);
+	clk_prepare_enable(clk[gpio1_gate]);
+	clk_prepare_enable(clk[gpio2_gate]);
+	clk_prepare_enable(clk[gpio3_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
+
+	/*
+	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
+	 * before conversion to common clk also enabled UART1 (which isn't
+	 * handled here and not needed for mmc) and IIM (which is enabled
+	 * unconditionally above).
+	 */
+	clk_prepare_enable(clk[scc_gate]);
+
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+
+#ifdef CONFIG_MXC_USE_EPIT
+	epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
+	mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
+#endif
+
+	return 0;
+}

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -0,0 +1,583 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include "crm-regs-imx5.h"
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+/* Low-power Audio Playback Mode clock */
+static const char *lp_apm_sel[] = { "osc", };
+
+/* This is used multiple times */
+static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
+static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
+static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
+static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
+static const char *per_root_sel[] = { "per_podf", "ipg", };
+static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
+static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
+static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
+static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
+static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
+static const char *emi_slow_sel[] = { "main_bus", "ahb", };
+static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
+static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
+static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
+static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
+static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
+static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
+static const char *mx53_cko1_sel[] = {
+	"cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
+	"emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
+	"di_pred", "dummy", "dummy", "ahb",
+	"ipg", "per_root", "ckil", "dummy",};
+static const char *mx53_cko2_sel[] = {
+	"dummy"/* dptc_core */, "dummy"/* dptc_perich */,
+	"dummy", "esdhc_a_podf",
+	"usboh3_podf", "dummy"/* wrck_clk_root */,
+	"ecspi_podf", "dummy"/* pll1_ref_clk */,
+	"esdhc_b_podf", "dummy"/* ddr_clk_root */,
+	"dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
+	"vpu_sel", "ipu_sel",
+	"osc", "ckih1",
+	"dummy", "esdhc_c_sel",
+	"ssi1_root_podf", "ssi2_root_podf",
+	"dummy", "dummy",
+	"dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
+	"dummy"/* tve_out */, "usb_phy_sel",
+	"tve_sel", "lp_apm",
+	"uart_root", "dummy"/* spdif0_clk_root */,
+	"dummy", "dummy", };
+
+enum imx5_clks {
+	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
+	uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
+	emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
+	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused,
+	tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
+	uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
+	gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
+	gpt_hf_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+	esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
+	ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
+	ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
+	ipu_gate, nfc_gate, ipu_di1_gate, vpu_s, vpu_gate,
+	vpu_reference_gate, uart4_ipg_gate, uart4_per_gate, uart5_ipg_gate,
+	uart5_per_gate, tve_gate, tve_pred, esdhc1_per_gate, esdhc2_per_gate,
+	esdhc3_per_gate, esdhc4_per_gate, usb_phy_gate, hsi2c_gate,
+	mipi_hsc1_gate, mipi_hsc2_gate, mipi_esc_gate, mipi_hsp_gate,
+	ldb_di1_div_3_5, ldb_di1_div, ldb_di0_div_3_5, ldb_di0_div,
+	ldb_di1_gate, can2_serial_gate, can2_ipg_gate, i2c3_gate, lp_apm,
+	periph_apm, main_bus, ahb_max, aips_tz1, aips_tz2, tmax1, tmax2,
+	tmax3, spba, uart_sel, esdhc_a_sel, esdhc_b_sel, esdhc_a_podf,
+	esdhc_b_podf, ecspi_sel, usboh3_sel, usb_phy_sel, iim_gate,
+	usboh3_gate, emi_fast_gate, ipu_di0_gate,gpc_dvfs, pll1_sw, pll2_sw,
+	pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw,
+	ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate,
+	usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root,
+	ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel,
+	ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred,
+	ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
+	ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
+	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
+	can_sel, can1_serial_gate, can1_ipg_gate,
+	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
+	cko1_sel, cko1_podf, cko1,
+	cko2_sel, cko2_podf, cko2,
+	srtc_gate, pata_gate,
+	clk_max
+};
+
+static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
+
+static void __init mx5_clocks_common_init(unsigned long rate_ckil,
+		unsigned long rate_osc, unsigned long rate_ckih1,
+		unsigned long rate_ckih2)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
+	clk[osc] = imx_clk_fixed("osc", rate_osc);
+	clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
+	clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+
+	clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
+				lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+	clk[periph_apm] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+				periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+	clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+				main_bus_sel, ARRAY_SIZE(main_bus_sel));
+	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
+				per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
+	clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
+	clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
+	clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
+	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
+				per_root_sel, ARRAY_SIZE(per_root_sel));
+	clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
+	clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
+	clk[aips_tz1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
+	clk[aips_tz2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
+	clk[tmax1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
+	clk[tmax2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
+	clk[tmax3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
+	clk[spba] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
+	clk[ipg] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
+	clk[axi_a] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
+	clk[axi_b] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
+	clk[uart_sel] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[uart_pred] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
+	clk[uart_root] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
+
+	clk[esdhc_a_sel] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[esdhc_b_sel] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[esdhc_a_pred] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
+	clk[esdhc_a_podf] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
+	clk[esdhc_b_pred] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
+	clk[esdhc_b_podf] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
+	clk[esdhc_c_s] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+	clk[esdhc_d_s] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
+
+	clk[emi_sel] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
+				emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
+	clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
+	clk[nfc_podf] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
+	clk[ecspi_sel] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[ecspi_pred] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
+	clk[ecspi_podf] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
+	clk[usboh3_sel] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
+				standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+	clk[usboh3_pred] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
+	clk[usboh3_podf] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
+	clk[usb_phy_pred] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
+	clk[usb_phy_podf] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
+	clk[usb_phy_sel] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
+				usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
+	clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+	clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
+	clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
+	clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
+	clk[uart2_ipg_gate] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
+	clk[uart2_per_gate] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
+	clk[uart3_ipg_gate] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
+	clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
+	clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
+	clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12);
+	clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
+	clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16);
+	clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18);
+	clk[gpt_hf_gate] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20);
+	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
+	clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
+	clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
+	clk[esdhc1_ipg_gate] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
+	clk[esdhc2_ipg_gate] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
+	clk[esdhc3_ipg_gate] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
+	clk[esdhc4_ipg_gate] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
+	clk[ssi1_ipg_gate] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
+	clk[ssi2_ipg_gate] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
+	clk[ssi3_ipg_gate] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
+	clk[ecspi1_ipg_gate] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
+	clk[ecspi1_per_gate] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
+	clk[ecspi2_ipg_gate] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
+	clk[ecspi2_per_gate] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
+	clk[cspi_ipg_gate] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
+	clk[emi_fast_gate] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
+	clk[emi_slow_gate] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
+	clk[ipu_s] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
+	clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
+	clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
+	clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+	clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
+	clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
+	clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
+	clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
+	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
+	clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
+	clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
+	clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
+	clk[uart4_ipg_gate] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
+	clk[uart4_per_gate] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
+	clk[uart5_ipg_gate] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
+	clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
+	clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
+
+	clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
+	clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
+	clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+	clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
+	clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
+	clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
+	clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
+	clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
+	clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
+	clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
+	clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
+	clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
+	clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
+	clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
+	clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
+	clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
+	clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
+	clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+	clk[epit1_ipg_gate] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2);
+	clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
+	clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
+	clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
+	clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
+	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX5 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_per_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_per_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_per_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_per_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[ecspi1_per_gate], "per", "imx51-ecspi.0");
+	clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
+	clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
+	clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
+	clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
+	clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
+	clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
+	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
+	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
+	clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
+	clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+	clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[iim_gate], "iim", NULL);
+	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
+	clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
+	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+	clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
+	clk_register_clkdev(clk[epit1_hf_gate], "per", "imx-epit.0");
+	clk_register_clkdev(clk[epit2_ipg_gate], "ipg", "imx-epit.1");
+	clk_register_clkdev(clk[epit2_hf_gate], "per", "imx-epit.1");
+
+	/* Set SDHC parents to be PLL2 */
+	clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
+	clk_set_parent(clk[esdhc_b_sel], clk[pll2_sw]);
+
+	/* move usb phy clk to 24MHz */
+	clk_set_parent(clk[usb_phy_sel], clk[osc]);
+
+	clk_prepare_enable(clk[gpc_dvfs]);
+	clk_prepare_enable(clk[ahb_max]); /* esdhc3 */
+	clk_prepare_enable(clk[aips_tz1]);
+	clk_prepare_enable(clk[aips_tz2]); /* fec */
+	clk_prepare_enable(clk[spba]);
+	clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+	clk_prepare_enable(clk[emi_slow_gate]); /* eim */
+	clk_prepare_enable(clk[mipi_hsc1_gate]);
+	clk_prepare_enable(clk[mipi_hsc2_gate]);
+	clk_prepare_enable(clk[mipi_esc_gate]);
+	clk_prepare_enable(clk[mipi_hsp_gate]);
+	clk_prepare_enable(clk[tmax1]);
+	clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
+	clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
+}
+
+int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+			unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+	int i;
+	u32 val;
+	struct device_node *np;
+
+	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
+	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
+	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+				mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
+	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+				mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
+	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
+				mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
+	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
+	clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+	clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
+	clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
+	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+	clk[usb_phy_gate] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
+	clk[hsi2c_gate] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
+	clk[mipi_hsc1_gate] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
+	clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
+	clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
+	clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX51 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+	clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
+	clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
+	clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
+	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+	clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0");
+	clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx51.0");
+	clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx51.1");
+	clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx51.2");
+	clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3");
+	clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3");
+
+	/* set the usboh3 parent to pll2_sw */
+	clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
+
+	/* set SDHC root clock to 166.25MHZ*/
+	clk_set_rate(clk[esdhc_a_podf], 166250000);
+	clk_set_rate(clk[esdhc_b_podf], 166250000);
+
+	/* System timer */
+	mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
+
+	clk_prepare_enable(clk[iim_gate]);
+	imx_print_silicon_rev("i.MX51", mx51_revision());
+	clk_disable_unprepare(clk[iim_gate]);
+
+	/*
+	 * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
+	 * longer supported. Set to one for better power saving.
+	 *
+	 * The effect of not setting these bits is that MIPI clocks can't be
+	 * enabled without the IPU clock being enabled aswell.
+	 */
+	val = readl(MXC_CCM_CCDR);
+	val |= 1 << 18;
+	writel(val, MXC_CCM_CCDR);
+
+	val = readl(MXC_CCM_CLPCR);
+	val |= 1 << 23;
+	writel(val, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+			unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+	int i;
+	unsigned long r;
+	struct device_node *np;
+
+	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
+	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
+	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+	clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+
+	clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
+	clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
+	clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
+	clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
+	clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
+	clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
+	clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
+	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+				mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
+	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+				mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
+	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
+	clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+	clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+	clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+	clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+	clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+	clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+	clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
+				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
+	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
+	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
+	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+
+	clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+				mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+	clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+	clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+	clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+				mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+	clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+	clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX53 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
+	clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
+	clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0");
+	clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx53.0");
+	clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx53.1");
+	clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx53.2");
+	clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3");
+	clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3");
+	clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3");
+
+	/* set SDHC root clock to 200MHZ*/
+	clk_set_rate(clk[esdhc_a_podf], 200000000);
+	clk_set_rate(clk[esdhc_b_podf], 200000000);
+
+	/* System timer */
+	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
+
+	clk_prepare_enable(clk[iim_gate]);
+	imx_print_silicon_rev("i.MX53", mx53_revision());
+	clk_disable_unprepare(clk[iim_gate]);
+
+	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
+	clk_set_rate(clk[usboh3_per_gate], r);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+				   unsigned long *ckih1, unsigned long *ckih2)
+{
+	struct device_node *np;
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-ckil"))
+			*ckil = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-osc"))
+			*osc = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+			*ckih1 = rate;
+		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+			*ckih2 = rate;
+	}
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+	unsigned long ckil, osc, ckih1, ckih2;
+
+	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+	unsigned long ckil, osc, ckih1, ckih2;
+
+	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
+#endif

arch/arm/mach-imx/clk-imx6q.c

@@ -0,0 +1,581 @@
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CCGR0				0x68
+#define CCGR1				0x6c
+#define CCGR2				0x70
+#define CCGR3				0x74
+#define CCGR4				0x78
+#define CCGR5				0x7c
+#define CCGR6				0x80
+#define CCGR7				0x84
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
+
+static void __iomem *ccm_base;
+
+void imx6q_set_chicken_bit(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_CHICKEN_BIT;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+	static bool last_rbc_mode;
+
+	if (last_rbc_mode == enable)
+		return;
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+
+	last_rbc_mode = enable;
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+	static bool last_wb_mode;
+
+	if (last_wb_mode == enable)
+		return;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	last_wb_mode = enable;
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		imx6q_enable_wb(false);
+		imx6q_enable_rbc(false);
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	return 0;
+}
+
+static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
+static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *gpu_axi_sels[]	= { "axi", "ahb", };
+static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
+static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
+static const char *pcie_axi_sels[]	= { "axi", "ahb", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vdo_axi_sels[]	= { "axi", "ahb", };
+static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+
+enum mx6q_clks {
+	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
+	pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
+	pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
+	periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
+	esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
+	gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
+	ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
+	ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
+	ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
+	usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
+	emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
+	periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
+	asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
+	gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
+	ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
+	ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
+	ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
+	usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
+	emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
+	mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
+	can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
+	esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
+	hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
+	ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
+	mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
+	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
+	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
+	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
+	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
+	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
+};
+
+static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
+
+static enum mx6q_clks const clks_init_on[] __initconst = {
+	mmdc_ch0_axi, rom, pll1_sys,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+	{ .val = 0, .div = 20, },
+	{ .val = 1, .div = 10, },
+	{ .val = 2, .div = 5, },
+	{ .val = 3, .div = 4, },
+};
+
+static struct clk_div_table post_div_table[] = {
+	{ .val = 2, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table video_div_table[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 1, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
+int __init mx6q_clocks_init(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int i, irq;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	for_each_compatible_node(np, NULL, "fixed-clock") {
+		u32 rate;
+		if (of_property_read_u32(np, "clock-frequency", &rate))
+			continue;
+
+		if (of_device_is_compatible(np, "fsl,imx-ckil"))
+			clk[ckil] = imx_clk_fixed("ckil", rate);
+		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+			clk[ckih] = imx_clk_fixed("ckih", rate);
+		else if (of_device_is_compatible(np, "fsl,imx-osc"))
+			clk[osc] = imx_clk_fixed("osc", rate);
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
+	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+		post_div_table[1].div = 1;
+		post_div_table[2].div = 1;
+		video_div_table[1].div = 1;
+		video_div_table[2].div = 1;
+	};
+
+	/*                   type                               name         parent_name  base     div_mask */
+	clk[pll1_sys]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
+	clk[pll2_bus]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
+	clk[pll3_usb_otg]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
+	clk[pll4_audio]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
+	clk[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
+	clk[pll6_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
+	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
+	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x0);
+
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework may need to enable/disable usbphy's parent
+	 */
+	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+	clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+	clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+
+	clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+	clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+	clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+			&imx_ccm_lock);
+
+	/*                                name              parent_name        reg       idx */
+	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
+	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
+	clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",     base + 0x100, 2);
+	clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
+	clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
+	clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,  2);
+	clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,  3);
+
+	/*                                    name         parent_name     mult div */
+	clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+	clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1, 4);
+	clk[pll3_80m]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
+	clk[pll3_60m]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
+	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+
+	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	ccm_base = base;
+
+	/*                                  name                reg       shift width parent_names     num_parents */
+	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
+	clk[pll1_sw]          = imx_clk_mux("pll1_sw",	        base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
+	clk[periph_pre]       = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[periph2_pre]      = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph_pre_sels,   ARRAY_SIZE(periph_pre_sels));
+	clk[periph_clk2_sel]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
+	clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+	clk[axi_sel]          = imx_clk_mux("axi_sel",          base + 0x14, 6,  2, axi_sels,          ARRAY_SIZE(axi_sels));
+	clk[esai_sel]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[asrc_sel]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[spdif_sel]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
+	clk[gpu2d_axi]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[gpu3d_axi]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	clk[gpu2d_core_sel]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
+	clk[gpu3d_core_sel]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
+	clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+	clk[ipu1_sel]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
+	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
+	clk[ipu1_di0_sel]     = imx_clk_mux("ipu1_di0_sel",     base + 0x34, 0,  3, ipu1_di0_sels,     ARRAY_SIZE(ipu1_di0_sels));
+	clk[ipu1_di1_sel]     = imx_clk_mux("ipu1_di1_sel",     base + 0x34, 9,  3, ipu1_di1_sels,     ARRAY_SIZE(ipu1_di1_sels));
+	clk[ipu2_di0_sel]     = imx_clk_mux("ipu2_di0_sel",     base + 0x38, 0,  3, ipu2_di0_sels,     ARRAY_SIZE(ipu2_di0_sels));
+	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
+	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
+	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
+	clk[ssi1_sel]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[ssi2_sel]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[ssi3_sel]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
+	clk[usdhc1_sel]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc2_sel]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc3_sel]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
+	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
+	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
+	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+
+	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
+	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
+	clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26,  1,   base + 0x48, 3,  periph2_sels, ARRAY_SIZE(periph2_sels));
+
+	/*                                      name                parent_name          reg       shift width */
+	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
+	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
+	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
+	clk[ipg_per]          = imx_clk_divider("ipg_per",          "ipg",               base + 0x1c, 0,  6);
+	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
+	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
+	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
+	clk[asrc_podf]        = imx_clk_divider("asrc_podf",        "asrc_pred",         base + 0x30, 9,  3);
+	clk[spdif_pred]       = imx_clk_divider("spdif_pred",       "spdif_sel",         base + 0x30, 25, 3);
+	clk[spdif_podf]       = imx_clk_divider("spdif_podf",       "spdif_pred",        base + 0x30, 22, 3);
+	clk[can_root]         = imx_clk_divider("can_root",         "pll3_usb_otg",      base + 0x20, 2,  6);
+	clk[ecspi_root]       = imx_clk_divider("ecspi_root",       "pll3_60m",          base + 0x38, 19, 6);
+	clk[gpu2d_core_podf]  = imx_clk_divider("gpu2d_core_podf",  "gpu2d_core_sel",    base + 0x18, 23, 3);
+	clk[gpu3d_core_podf]  = imx_clk_divider("gpu3d_core_podf",  "gpu3d_core_sel",    base + 0x18, 26, 3);
+	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
+	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
+	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
+	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
+	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
+	clk[ipu2_di1_pre]     = imx_clk_divider("ipu2_di1_pre",     "ipu2_di1_pre_sel",  base + 0x38, 12, 3);
+	clk[hsi_tx_podf]      = imx_clk_divider("hsi_tx_podf",      "hsi_tx_sel",        base + 0x30, 29, 3);
+	clk[ssi1_pred]        = imx_clk_divider("ssi1_pred",        "ssi1_sel",          base + 0x28, 6,  3);
+	clk[ssi1_podf]        = imx_clk_divider("ssi1_podf",        "ssi1_pred",         base + 0x28, 0,  6);
+	clk[ssi2_pred]        = imx_clk_divider("ssi2_pred",        "ssi2_sel",          base + 0x2c, 6,  3);
+	clk[ssi2_podf]        = imx_clk_divider("ssi2_podf",        "ssi2_pred",         base + 0x2c, 0,  6);
+	clk[ssi3_pred]        = imx_clk_divider("ssi3_pred",        "ssi3_sel",          base + 0x28, 22, 3);
+	clk[ssi3_podf]        = imx_clk_divider("ssi3_podf",        "ssi3_pred",         base + 0x28, 16, 6);
+	clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m",          base + 0x24, 0,  6);
+	clk[usdhc1_podf]      = imx_clk_divider("usdhc1_podf",      "usdhc1_sel",        base + 0x24, 11, 3);
+	clk[usdhc2_podf]      = imx_clk_divider("usdhc2_podf",      "usdhc2_sel",        base + 0x24, 16, 3);
+	clk[usdhc3_podf]      = imx_clk_divider("usdhc3_podf",      "usdhc3_sel",        base + 0x24, 19, 3);
+	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
+	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
+	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
+	clk[emi_podf]         = imx_clk_divider("emi_podf",         "emi_sel",           base + 0x1c, 20, 3);
+	clk[emi_slow_podf]    = imx_clk_divider("emi_slow_podf",    "emi_slow_sel",      base + 0x1c, 23, 3);
+	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
+	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+
+	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
+	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
+	clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph",      base + 0x14, 19,  3,   base + 0x48, 4);
+	clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2",     base + 0x14, 3,   3,   base + 0x48, 2);
+	clk[arm]               = imx_clk_busy_divider("arm",               "pll1_sw",     base + 0x10, 0,   3,   base + 0x48, 16);
+	clk[ahb]               = imx_clk_busy_divider("ahb",               "periph",      base + 0x14, 10,  3,   base + 0x48, 1);
+
+	/*                                name             parent_name          reg         shift */
+	clk[apbh_dma]     = imx_clk_gate2("apbh_dma",      "usdhc3",            base + 0x68, 4);
+	clk[asrc]         = imx_clk_gate2("asrc",          "asrc_podf",         base + 0x68, 6);
+	clk[can1_ipg]     = imx_clk_gate2("can1_ipg",      "ipg",               base + 0x68, 14);
+	clk[can1_serial]  = imx_clk_gate2("can1_serial",   "can_root",          base + 0x68, 16);
+	clk[can2_ipg]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
+	clk[can2_serial]  = imx_clk_gate2("can2_serial",   "can_root",          base + 0x68, 20);
+	clk[ecspi1]       = imx_clk_gate2("ecspi1",        "ecspi_root",        base + 0x6c, 0);
+	clk[ecspi2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
+	clk[ecspi3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
+	clk[ecspi4]       = imx_clk_gate2("ecspi4",        "ecspi_root",        base + 0x6c, 6);
+	clk[ecspi5]       = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
+	clk[enet]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
+	clk[esai]         = imx_clk_gate2("esai",          "esai_podf",         base + 0x6c, 16);
+	clk[gpt_ipg]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
+	clk[gpt_ipg_per]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
+	clk[gpu2d_core]   = imx_clk_gate2("gpu2d_core",    "gpu2d_core_podf",   base + 0x6c, 24);
+	clk[gpu3d_core]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
+	clk[hdmi_iahb]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
+	clk[hdmi_isfr]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
+	clk[i2c1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
+	clk[i2c2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
+	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
+	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
+	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
+	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
+	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
+	clk[ipu2]         = imx_clk_gate2("ipu2",          "ipu2_podf",         base + 0x74, 6);
+	clk[ipu2_di0]     = imx_clk_gate2("ipu2_di0",      "ipu2_di0_sel",      base + 0x74, 8);
+	clk[ldb_di0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_podf",      base + 0x74, 12);
+	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
+	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
+	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
+	clk[mlb]          = imx_clk_gate2("mlb",           "axi",               base + 0x74, 18);
+	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
+	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
+	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
+	clk[openvg_axi]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
+	clk[pcie_axi]     = imx_clk_gate2("pcie_axi",      "pcie_axi_sel",      base + 0x78, 0);
+	clk[per1_bch]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
+	clk[pwm1]         = imx_clk_gate2("pwm1",          "ipg_per",           base + 0x78, 16);
+	clk[pwm2]         = imx_clk_gate2("pwm2",          "ipg_per",           base + 0x78, 18);
+	clk[pwm3]         = imx_clk_gate2("pwm3",          "ipg_per",           base + 0x78, 20);
+	clk[pwm4]         = imx_clk_gate2("pwm4",          "ipg_per",           base + 0x78, 22);
+	clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb",  "usdhc3",            base + 0x78, 24);
+	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
+	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
+	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+	clk[rom]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
+	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
+	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
+	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
+	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
+	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
+	clk[uart_ipg]     = imx_clk_gate2("uart_ipg",      "ipg",               base + 0x7c, 24);
+	clk[uart_serial]  = imx_clk_gate2("uart_serial",   "uart_serial_podf",  base + 0x7c, 26);
+	clk[usboh3]       = imx_clk_gate2("usboh3",        "ipg",               base + 0x80, 0);
+	clk[usdhc1]       = imx_clk_gate2("usdhc1",        "usdhc1_podf",       base + 0x80, 2);
+	clk[usdhc2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
+	clk[usdhc3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
+	clk[usdhc4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
+	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
+	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
+	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX6q clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_data.clks = clk;
+	clk_data.clk_num = ARRAY_SIZE(clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+	clk_register_clkdev(clk[ahb], "ahb", NULL);
+	clk_register_clkdev(clk[cko1], "cko1", NULL);
+	clk_register_clkdev(clk[arm], NULL, "cpu0");
+
+	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
+		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+	}
+
+	/*
+	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+	 * We can not get the 100MHz from the pll2_pfd0_352m.
+	 * So choose pll2_pfd2_396m as enfc_sel's parent.
+	 */
+	clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clk[clks_init_on[i]]);
+
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clk[usbphy1_gate]);
+		clk_prepare_enable(clk[usbphy2_gate]);
+	}
+
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(base, irq);
+
+	return 0;
+}

arch/arm/mach-imx/clk-pfd.c

@@ -0,0 +1,147 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw:	clock source
+ * @reg:	PFD register address
+ * @idx:	the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series.  Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one.  And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET	0x4
+#define CLR	0x8
+#define OTG	0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+	return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u64 tmp = *prate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+	tmp = *prate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+
+	writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+	writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+	.enable		= clk_pfd_enable,
+	.disable	= clk_pfd_disable,
+	.recalc_rate	= clk_pfd_recalc_rate,
+	.round_rate	= clk_pfd_round_rate,
+	.set_rate	= clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx)
+{
+	struct clk_pfd *pfd;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+	if (!pfd)
+		return ERR_PTR(-ENOMEM);
+
+	pfd->reg = reg;
+	pfd->idx = idx;
+
+	init.name = name;
+	init.ops = &clk_pfd_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pfd->hw.init = &init;
+
+	clk = clk_register(NULL, &pfd->hw);
+	if (IS_ERR(clk))
+		kfree(pfd);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv1.c

@@ -0,0 +1,111 @@
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+
+#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw	clock source
+ * @parent	the parent clock name
+ * @base	base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+struct clk_pllv1 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_pllv1 *pll = to_clk_pllv1(hw);
+	long long ll;
+	int mfn_abs;
+	unsigned int mfi, mfn, mfd, pd;
+	u32 reg;
+	unsigned long rate;
+
+	reg = readl(pll->base);
+
+	/*
+	 * Get the resulting clock rate from a PLL register value and the input
+	 * frequency. PLLs with this register layout can be found on i.MX1,
+	 * i.MX21, i.MX27 and i,MX31
+	 *
+	 *                  mfi + mfn / (mfd + 1)
+	 *  f = 2 * f_ref * --------------------
+	 *                        pd + 1
+	 */
+
+	mfi = (reg >> 10) & 0xf;
+	mfn = reg & 0x3ff;
+	mfd = (reg >> 16) & 0x3ff;
+	pd =  (reg >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	mfn_abs = mfn;
+
+	/*
+	 * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
+
+	rate = parent_rate * 2;
+	rate /= pd + 1;
+
+	ll = (unsigned long long)rate * mfn_abs;
+
+	do_div(ll, mfd + 1);
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		ll = -ll;
+
+	ll = (rate * mfi) + ll;
+
+	return ll;
+}
+
+static struct clk_ops clk_pllv1_ops = {
+	.recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv1 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv1_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv2.c

@@ -0,0 +1,266 @@
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+		u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dbl;
+	s64 temp;
+
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+	void __iomem *pllbase;
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+	pllbase = pll->base;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+	dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+	dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+	return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+		u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
+	u32 reg;
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate / 1000000);
+	mfn = (long)temp64;
+
+	reg = mfi << 4 | pdf;
+
+	*dp_op = reg;
+	*dp_mfd = mfd;
+	*dp_mfn = mfn;
+
+	return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	void __iomem *pllbase;
+	u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+	int ret;
+
+	pllbase = pll->base;
+
+
+	ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+	if (ret)
+		return ret;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+
+	__raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+	__raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+	__raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
+
+	return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	u32 dp_op, dp_mfd, dp_mfn;
+
+	__clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+	return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+			dp_op, dp_mfd, dp_mfn);
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static struct clk_ops clk_pllv2_ops = {
+	.prepare = clk_pllv2_prepare,
+	.unprepare = clk_pllv2_unprepare,
+	.recalc_rate = clk_pllv2_recalc_rate,
+	.round_rate = clk_pllv2_round_rate,
+	.set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv2 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv2_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv3.c

@@ -0,0 +1,355 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET		0x10
+#define PLL_DENOM_OFFSET	0x20
+
+#define BM_PLL_POWER		(0x1 << 12)
+#define BM_PLL_ENABLE		(0x1 << 13)
+#define BM_PLL_BYPASS		(0x1 << 16)
+#define BM_PLL_LOCK		(0x1 << 31)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw:	 clock source
+ * @base:	 base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @div_mask:	 mask of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series.  Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+	bool		powerup_set;
+	u32		div_mask;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val |= BM_PLL_POWER;
+	else
+		val &= ~BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+
+	/* Wait for PLL to lock */
+	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val &= ~BM_PLL_POWER;
+	else
+		val |= BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_enable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= BM_PLL_ENABLE;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static void clk_pllv3_disable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~BM_PLL_ENABLE;
+	writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base)  & pll->div_mask;
+
+	return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+
+	return (rate >= parent_rate * 22) ? parent_rate * 22 :
+					    parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	if (rate == parent_rate * 22)
+		div = 1;
+	else if (rate == parent_rate * 20)
+		div = 0;
+	else
+		return -EINVAL;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_recalc_rate,
+	.round_rate	= clk_pllv3_round_rate,
+	.set_rate	= clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 div;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+	div = rate * 2 / parent_rate;
+
+	return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 val, div;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate * 2 / parent_rate;
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_sys_recalc_rate,
+	.round_rate	= clk_pllv3_sys_round_rate,
+	.set_rate	= clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+	u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_av_recalc_rate,
+	.round_rate	= clk_pllv3_av_round_rate,
+	.set_rate	= clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	return 500000000;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_enet_recalc_rate,
+};
+
+static const struct clk_ops clk_pllv3_mlb_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+			  const char *parent_name, void __iomem *base,
+			  u32 div_mask)
+{
+	struct clk_pllv3 *pll;
+	const struct clk_ops *ops;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	switch (type) {
+	case IMX_PLLV3_SYS:
+		ops = &clk_pllv3_sys_ops;
+		break;
+	case IMX_PLLV3_USB:
+		ops = &clk_pllv3_ops;
+		pll->powerup_set = true;
+		break;
+	case IMX_PLLV3_AV:
+		ops = &clk_pllv3_av_ops;
+		break;
+	case IMX_PLLV3_ENET:
+		ops = &clk_pllv3_enet_ops;
+		break;
+	case IMX_PLLV3_MLB:
+		ops = &clk_pllv3_mlb_ops;
+		break;
+	default:
+		ops = &clk_pllv3_ops;
+	}
+	pll->base = base;
+	pll->div_mask = div_mask;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk.c

@@ -0,0 +1,4 @@
+#include <linux/spinlock.h>
+#include "clk.h"
+
+DEFINE_SPINLOCK(imx_ccm_lock);

arch/arm/mach-imx/clk.h

@@ -0,0 +1,100 @@
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+
+extern spinlock_t imx_ccm_lock;
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base);
+
+enum imx_pllv3_type {
+	IMX_PLLV3_GENERIC,
+	IMX_PLLV3_SYS,
+	IMX_PLLV3_USB,
+	IMX_PLLV3_AV,
+	IMX_PLLV3_ENET,
+	IMX_PLLV3_MLB,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+		const char *parent_name, void __iomem *base, u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+		void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents);
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_divider_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift, u8 width,
+		unsigned long flags)
+{
+	return clk_register_divider(NULL, name, parent, flags,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char **parents, int num_parents)
+{
+	return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+			width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux_flags(const char *name,
+		void __iomem *reg, u8 shift, u8 width, const char **parents,
+		int num_parents, unsigned long flags)
+{
+	return clk_register_mux(NULL, name, parents, num_parents,
+			flags, reg, shift, width, 0,
+			&imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+		const char *parent, unsigned int mult, unsigned int div)
+{
+	return clk_register_fixed_factor(NULL, name, parent,
+			CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif

arch/arm/mach-imx/common.h

@@ -0,0 +1,164 @@
+/*
+ * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_COMMON_H__
+#define __ASM_ARCH_MXC_COMMON_H__
+
+struct platform_device;
+struct pt_regs;
+struct clk;
+enum mxc_cpu_pwr_mode;
+
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx25_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
+extern void mx51_map_io(void);
+extern void mx53_map_io(void);
+extern void imx1_init_early(void);
+extern void imx21_init_early(void);
+extern void imx25_init_early(void);
+extern void imx27_init_early(void);
+extern void imx31_init_early(void);
+extern void imx35_init_early(void);
+extern void imx51_init_early(void);
+extern void imx53_init_early(void);
+extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
+extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx51_init_late(void);
+extern void imx53_init_late(void);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(void);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
+extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
+extern int mx25_clocks_init_dt(void);
+extern int mx27_clocks_init_dt(void);
+extern int mx31_clocks_init_dt(void);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
+extern struct platform_device *mxc_register_gpio(char *name, int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
+extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
+extern void mxc_arch_reset_init(void __iomem *);
+extern int mx53_revision(void);
+extern int imx6q_revision(void);
+extern int mx53_display_revision(void);
+extern void imx_set_aips(void __iomem *);
+extern int mxc_device_init(void);
+
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
+enum mx3_cpu_pwr_mode {
+	MX3_RUN,
+	MX3_WAIT,
+	MX3_DOZE,
+	MX3_SLEEP,
+};
+
+extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
+extern void v7_cpu_resume(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+extern void imx_scu_standby_enable(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+static inline void imx_scu_standby_enable(void) {}
+#endif
+extern void imx_src_init(void);
+extern void imx_src_prepare_restart(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
+extern void imx_gpc_mask_all(void);
+extern void imx_gpc_restore_all(void);
+extern void imx_anatop_init(void);
+extern void imx_anatop_pre_suspend(void);
+extern void imx_anatop_post_resume(void);
+extern void imx_anatop_usb_chrg_detect_disable(void);
+extern u32 imx_anatop_get_digprog(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_set_chicken_bit(void);
+
+extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
+
+#ifdef CONFIG_PM
+extern void imx6q_pm_init(void);
+extern void imx51_pm_init(void);
+extern void imx53_pm_init(void);
+#else
+static inline void imx6q_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+#endif
+
+#ifdef CONFIG_NEON
+extern int mx51_neon_fixup(void);
+#else
+static inline int mx51_neon_fixup(void) { return 0; }
+#endif
+
+extern struct smp_operations imx_smp_ops;
+
+#endif

arch/arm/mach-imx/cpu-imx25.c

@@ -0,0 +1,42 @@
+/*
+ * MX25 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include "iim.h"
+#include "hardware.h"
+
+static int mx25_cpu_rev = -1;
+
+static int mx25_read_cpu_rev(void)
+{
+	u32 rev;
+
+	rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		return IMX_CHIP_REVISION_1_0;
+	case 0x01:
+		return IMX_CHIP_REVISION_1_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+int mx25_revision(void)
+{
+	if (mx25_cpu_rev == -1)
+		mx25_cpu_rev = mx25_read_cpu_rev();
+
+	return mx25_cpu_rev;
+}
+EXPORT_SYMBOL(mx25_revision);

arch/arm/mach-imx/cpu-imx27.c

@@ -0,0 +1,74 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/*
+ * i.MX27 specific CPU detection code
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include "hardware.h"
+
+static int mx27_cpu_rev = -1;
+static int mx27_cpu_partnumber;
+
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+
+static int mx27_read_cpu_rev(void)
+{
+	u32 val;
+	/*
+	 * now we have access to the IO registers. As we need
+	 * the silicon revision very early we read it here to
+	 * avoid any further hooks
+	*/
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
+
+	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+
+	switch (val >> 28) {
+	case 0:
+		return IMX_CHIP_REVISION_1_0;
+	case 1:
+		return IMX_CHIP_REVISION_2_0;
+	case 2:
+		return IMX_CHIP_REVISION_2_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx27
+ */
+int mx27_revision(void)
+{
+	if (mx27_cpu_rev == -1)
+		mx27_cpu_rev = mx27_read_cpu_rev();
+
+	if (mx27_cpu_partnumber != 0x8821)
+		return -EINVAL;
+
+	return mx27_cpu_rev;
+}
+EXPORT_SYMBOL(mx27_revision);

arch/arm/mach-imx/cpu-imx31.c

@@ -0,0 +1,63 @@
+/*
+ * MX31 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "iim.h"
+
+static int mx31_cpu_rev = -1;
+
+static struct {
+	u8 srev;
+	const char *name;
+	unsigned int rev;
+} mx31_cpu_type[] = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
+	{ .srev = 0x10, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x11, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x12, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x13, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x14, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x15, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x28, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_2_0 },
+	{ .srev = 0x29, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_2_0 },
+};
+
+static int mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev &= 0xff;
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			imx_print_silicon_rev(mx31_cpu_type[i].name,
+						mx31_cpu_type[i].rev);
+			return mx31_cpu_type[i].rev;
+		}
+
+	imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
+	return IMX_CHIP_REVISION_UNKNOWN;
+}
+
+int mx31_revision(void)
+{
+	if (mx31_cpu_rev == -1)
+		mx31_cpu_rev = mx31_read_cpu_rev();
+
+	return mx31_cpu_rev;
+}
+EXPORT_SYMBOL(mx31_revision);

arch/arm/mach-imx/cpu-imx35.c

@@ -0,0 +1,43 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include "hardware.h"
+#include "iim.h"
+
+static int mx35_cpu_rev = -1;
+
+static int mx35_read_cpu_rev(void)
+{
+	u32 rev;
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		return IMX_CHIP_REVISION_1_0;
+	case 0x10:
+		return IMX_CHIP_REVISION_2_0;
+	case 0x11:
+		return IMX_CHIP_REVISION_2_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+int mx35_revision(void)
+{
+	if (mx35_cpu_rev == -1)
+		mx35_cpu_rev = mx35_read_cpu_rev();
+
+	return mx35_cpu_rev;
+}
+EXPORT_SYMBOL(mx35_revision);

arch/arm/mach-imx/cpu-imx5.c

@@ -0,0 +1,110 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include "hardware.h"
+#include "common.h"
+
+static int mx5_cpu_rev = -1;
+
+#define IIM_SREV 0x24
+
+static int get_mx51_srev(void)
+{
+	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
+	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+
+	switch (rev) {
+	case 0x0:
+		return IMX_CHIP_REVISION_2_0;
+	case 0x10:
+		return IMX_CHIP_REVISION_3_0;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx51
+ */
+int mx51_revision(void)
+{
+	if (!cpu_is_mx51())
+		return -EINVAL;
+
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx51_srev();
+
+	return mx5_cpu_rev;
+}
+EXPORT_SYMBOL(mx51_revision);
+
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+int __init mx51_neon_fixup(void)
+{
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
+		elf_hwcap &= ~HWCAP_NEON;
+		pr_info("Turning off NEON support, detected broken NEON implementation\n");
+	}
+	return 0;
+}
+
+#endif
+
+static int get_mx53_srev(void)
+{
+	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
+	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+
+	switch (rev) {
+	case 0x0:
+		return IMX_CHIP_REVISION_1_0;
+	case 0x2:
+		return IMX_CHIP_REVISION_2_0;
+	case 0x3:
+		return IMX_CHIP_REVISION_2_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx53
+ */
+int mx53_revision(void)
+{
+	if (!cpu_is_mx53())
+		return -EINVAL;
+
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx53_srev();
+
+	return mx5_cpu_rev;
+}
+EXPORT_SYMBOL(mx53_revision);

arch/arm/mach-imx/cpu.c

@@ -0,0 +1,46 @@
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include "hardware.h"
+#include "common.h"
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+	__mxc_cpu_type = type;
+}
+
+void imx_print_silicon_rev(const char *cpu, int srev)
+{
+	if (srev == IMX_CHIP_REVISION_UNKNOWN)
+		pr_info("CPU identified as %s, unknown revision\n", cpu);
+	else
+		pr_info("CPU identified as %s, silicon rev %d.%d\n",
+				cpu, (srev >> 4) & 0xf, srev & 0xf);
+}
+
+void __init imx_set_aips(void __iomem *base)
+{
+	unsigned int reg;
+/*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+	__raw_writel(0x77777777, base + 0x0);
+	__raw_writel(0x77777777, base + 0x4);
+
+/*
+ * Set all OPACRx to be non-bufferable, to not require
+ * supervisor privilege level for access, allow for
+ * write access and untrusted master access.
+ */
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+}

arch/arm/mach-imx/cpuidle-imx5.c

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index)
+{
+	arm_pm_idle();
+	return index;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+	.name             = "imx5_cpuidle",
+	.owner            = THIS_MODULE,
+	.states[0] = {
+		.enter            = imx5_cpuidle_enter,
+		.exit_latency     = 2,
+		.target_residency = 1,
+		.flags            = CPUIDLE_FLAG_TIME_VALID,
+		.name             = "IMX5 SRPG",
+		.desc             = "CPU state retained,powered off",
+	},
+	.state_count = 1,
+};
+
+int __init imx5_cpuidle_init(void)
+{
+	return cpuidle_register(&imx5_cpuidle_driver, NULL);
+}

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static atomic_t master = ATOMIC_INIT(0);
+static DEFINE_SPINLOCK(master_lock);
+
+static int imx6q_enter_wait(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	if (atomic_inc_return(&master) == num_online_cpus()) {
+		/*
+		 * With this lock, we prevent other cpu to exit and enter
+		 * this function again and become the master.
+		 */
+		if (!spin_trylock(&master_lock))
+			goto idle;
+		imx6q_set_lpm(WAIT_UNCLOCKED);
+		cpu_do_idle();
+		imx6q_set_lpm(WAIT_CLOCKED);
+		spin_unlock(&master_lock);
+		goto done;
+	}
+
+idle:
+	cpu_do_idle();
+done:
+	atomic_dec(&master);
+
+	return index;
+}
+
+static struct cpuidle_driver imx6q_cpuidle_driver = {
+	.name = "imx6q_cpuidle",
+	.owner = THIS_MODULE,
+	.states = {
+		/* WFI */
+		ARM_CPUIDLE_WFI_STATE,
+		/* WAIT */
+		{
+			.exit_latency = 50,
+			.target_residency = 75,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+			         CPUIDLE_FLAG_TIMER_STOP,
+			.enter = imx6q_enter_wait,
+			.name = "WAIT",
+			.desc = "Clock off",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
+int __init imx6q_cpuidle_init(void)
+{
+	/* Need to enable SCU standby for entering WAIT modes */
+	imx_scu_standby_enable();
+
+	/* Set chicken bit to get a reliable WAIT mode support */
+	imx6q_set_chicken_bit();
+
+	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
+}

arch/arm/mach-imx/cpuidle.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifdef CONFIG_CPU_IDLE
+extern int imx5_cpuidle_init(void);
+extern int imx6q_cpuidle_init(void);
+#else
+static inline int imx5_cpuidle_init(void)
+{
+	return 0;
+}
+static inline int imx6q_cpuidle_init(void)
+{
+	return 0;
+}
+#endif

arch/arm/mach-imx/crm-regs-imx5.h

@@ -0,0 +1,600 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/*MX53*/
+#define MX53_CCM_BASE		MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
+#define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
+#define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
+#define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CCGR7		(MX51_CCM_BASE + 0x84)
+
+#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN		(1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
+#define MXC_CCM_CCR_FPM_EN		(1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
+#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY	(1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
+#define MXC_CCM_CSR_FPM_READY	(1 << 1)
+#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
+						    1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL	(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
+#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 25)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
+#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1				(0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK				0x3
+#define MXC_CCM_CCGRx_MOD_OFF				0x0
+#define MXC_CCM_CCGRx_MOD_ON				0x3
+#define MXC_CCM_CCGRx_MOD_IDLE				0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET			30
+#define MXC_CCM_CCGRx_CG14_OFFSET			28
+#define MXC_CCM_CCGRx_CG13_OFFSET			26
+#define MXC_CCM_CCGRx_CG12_OFFSET			24
+#define MXC_CCM_CCGRx_CG11_OFFSET			22
+#define MXC_CCM_CCGRx_CG10_OFFSET			20
+#define MXC_CCM_CCGRx_CG9_OFFSET			18
+#define MXC_CCM_CCGRx_CG8_OFFSET			16
+#define MXC_CCM_CCGRx_CG7_OFFSET			14
+#define MXC_CCM_CCGRx_CG6_OFFSET			12
+#define MXC_CCM_CCGRx_CG5_OFFSET			10
+#define MXC_CCM_CCGRx_CG4_OFFSET			8
+#define MXC_CCM_CCGRx_CG3_OFFSET			6
+#define MXC_CCM_CCGRx_CG2_OFFSET			4
+#define MXC_CCM_CCGRx_CG1_OFFSET			2
+#define MXC_CCM_CCGRx_CG0_OFFSET			0
+
+#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET	8
+#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR		1
+#define MXC_SRPGCR_PCR		1
+#define MXC_EMPGCR_PCR		1
+#define MXC_PGSR_PSR		1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */

arch/arm/mach-imx/crmregs-imx3.h

@@ -0,0 +1,261 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+
+#define CKIH_CLK_FREQ           26000000
+#define CKIH_CLK_FREQ_27MHZ     27000000
+#define CKIL_CLK_FREQ           32768
+
+extern void __iomem *mx3_ccm_base;
+
+/* Register addresses */
+#define MXC_CCM_CCMR		0x00
+#define MXC_CCM_PDR0		0x04
+#define MXC_CCM_PDR1		0x08
+#define MX35_CCM_PDR2		0x0C
+#define MXC_CCM_RCSR		0x0C
+#define MX35_CCM_PDR3		0x10
+#define MXC_CCM_MPCTL		0x10
+#define MX35_CCM_PDR4		0x14
+#define MXC_CCM_UPCTL		0x14
+#define MX35_CCM_RCSR		0x18
+#define MXC_CCM_SRPCTL		0x18
+#define MX35_CCM_MPCTL		0x1C
+#define MXC_CCM_COSR		0x1C
+#define MX35_CCM_PPCTL		0x20
+#define MXC_CCM_CGR0		0x20
+#define MX35_CCM_ACMR		0x24
+#define MXC_CCM_CGR1		0x24
+#define MX35_CCM_COSR		0x28
+#define MXC_CCM_CGR2		0x28
+#define MX35_CCM_CGR0		0x2C
+#define MXC_CCM_WIMR		0x2C
+#define MX35_CCM_CGR1		0x30
+#define MXC_CCM_LDC		0x30
+#define MX35_CCM_CGR2		0x34
+#define MXC_CCM_DCVR0		0x34
+#define MX35_CCM_CGR3		0x38
+#define MXC_CCM_DCVR1		0x38
+#define MXC_CCM_DCVR2		0x3C
+#define MXC_CCM_DCVR3		0x40
+#define MXC_CCM_LTR0		0x44
+#define MXC_CCM_LTR1		0x48
+#define MXC_CCM_LTR2		0x4C
+#define MXC_CCM_LTR3		0x50
+#define MXC_CCM_LTBR0		0x54
+#define MXC_CCM_LTBR1		0x58
+#define MXC_CCM_PMCR0		0x5C
+#define MXC_CCM_PMCR1		0x60
+#define MXC_CCM_PDR2		0x64
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WBEN                       (1 << 27)
+#define MXC_CCM_CCMR_CSCS                       (1 << 25)
+#define MXC_CCM_CCMR_PERCS                      (1 << 24)
+#define MXC_CCM_CCMR_SSI1S_OFFSET               18
+#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
+#define MXC_CCM_CCMR_SSI2S_OFFSET               21
+#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
+#define MXC_CCM_CCMR_LPM_OFFSET                 14
+#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_LPM_WAIT_MX35		(0x1 << 14)
+#define MXC_CCM_CCMR_FIRS_OFFSET                11
+#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
+#define MXC_CCM_CCMR_UPE                        (1 << 9)
+#define MXC_CCM_CCMR_SPE                        (1 << 8)
+#define MXC_CCM_CCMR_MDS                        (1 << 7)
+#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
+#define MXC_CCM_CCMR_MPE                        (1 << 3)
+#define MXC_CCM_CCMR_PRCS_OFFSET                1
+#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
+
+#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
+#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
+#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
+#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
+#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
+#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
+#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
+#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
+#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
+#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
+#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
+#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
+#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
+
+#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
+#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
+#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
+#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
+#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
+#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
+#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
+#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
+#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
+#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_NF16B			0x80000000
+
+/*
+ * LTR0 register offsets
+ */
+#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
+#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
+#define MXC_CCM_LTR0_DNTHR_OFFSET               16
+#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
+#define MXC_CCM_LTR0_UPTHR_OFFSET               22
+#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
+
+/*
+ * LTR1 register offsets
+ */
+#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
+#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
+#define MXC_CCM_LTR1_UPCNT_OFFSET               6
+#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
+#define MXC_CCM_LTR1_DNCNT_OFFSET               14
+#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
+#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
+#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
+#define MXC_CCM_LTR1_LTBRSR                     0x400000
+#define MXC_CCM_LTR1_LTBRSH                     0x800000
+
+/*
+ * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
+ */
+#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
+#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR2_WSW_OFFSET((x)))
+#define MXC_CCM_LTR2_EMAC_OFFSET                0
+#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
+
+/*
+ * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
+ */
+#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
+#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR3_WSW_OFFSET((x)))
+
+#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
+#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
+#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
+#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
+#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
+#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
+#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
+
+#define DVSUP_TURBO				0
+#define DVSUP_HIGH				1
+#define DVSUP_MEDIUM				2
+#define DVSUP_LOW				3
+#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
+#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
+#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
+#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
+#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
+#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
+#define MXC_CCM_PMCR0_UDSC                      0x08000000
+#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
+
+#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
+#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
+#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
+#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
+#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
+#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
+#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
+#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
+#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
+#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
+#define MXC_CCM_PMCR0_DVFEV                     0x00800000
+#define MXC_CCM_PMCR0_DVFIS                     0x00400000
+#define MXC_CCM_PMCR0_LBMI                      0x00200000
+#define MXC_CCM_PMCR0_LBFL                      0x00100000
+#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
+#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
+#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
+#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
+#define MXC_CCM_PMCR0_LBCF_OFFSET               18
+#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
+#define MXC_CCM_PMCR0_PTVIS                     0x00020000
+#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
+#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
+#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
+#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
+#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
+#define MXC_CCM_PMCR0_DPVCR                     0x00001000
+#define MXC_CCM_PMCR0_DPVV                      0x00000800
+#define MXC_CCM_PMCR0_WFIM                      0x00000400
+#define MXC_CCM_PMCR0_DRCE3                     0x00000200
+#define MXC_CCM_PMCR0_DRCE2                     0x00000100
+#define MXC_CCM_PMCR0_DRCE1                     0x00000080
+#define MXC_CCM_PMCR0_DRCE0                     0x00000040
+#define MXC_CCM_PMCR0_DCR                       0x00000020
+#define MXC_CCM_PMCR0_DVFEN                     0x00000010
+#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
+#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
+#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
+#define MXC_CCM_PMCR0_DPTEN                     0x00000001
+
+#define MXC_CCM_PMCR1_DVGP_OFFSET               0
+#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
+
+#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
+#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
+
+#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
+#define MXC_CCM_DCVR_ULV_OFFSET                 22
+#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
+#define MXC_CCM_DCVR_LLV_OFFSET                 12
+#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
+#define MXC_CCM_DCVR_ELV_OFFSET                 2
+
+#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
+#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
+#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
+#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
+
+#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
+#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
+#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
+#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
+
+/*
+ * PMCR0 register offsets
+ */
+#define MXC_CCM_PMCR0_LBFL_OFFSET   20
+#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
+#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
+
+#endif				/* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */

arch/arm/mach-imx/devices-imx1.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_imx_fb_data imx1_imx_fb_data;
+#define imx1_add_imx_fb(pdata) \
+    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
+#define imx1_add_imx_i2c(pdata)		\
+	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
+
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
+#define imx1_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
+#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
+#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
+
+extern const struct imx_spi_imx_data imx1_cspi_data[];
+#define imx1_add_cspi(id, pdata)   \
+	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
+
+#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
+#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)

arch/arm/mach-imx/devices-imx21.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
+#define imx21_add_imx21_hcd(pdata)	\
+	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
+#define imx21_add_imx2_wdt()	\
+	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx21_imx_fb_data;
+#define imx21_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
+#define imx21_add_imx_i2c(pdata)	\
+	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
+
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
+#define imx21_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
+#define imx21_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
+#define imx21_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
+#define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
+#define imx21_add_imx_uart1(pdata)	imx21_add_imx_uart(1, pdata)
+#define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
+#define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
+
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
+#define imx21_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
+#define imx21_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
+#define imx21_add_mxc_w1()	\
+	imx_add_mxc_w1(&imx21_mxc_w1_data)
+
+extern const struct imx_spi_imx_data imx21_cspi_data[];
+#define imx21_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
+#define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)
+#define imx21_add_spi_imx1(pdata)	imx21_add_cspi(1, pdata)

arch/arm/mach-imx/devices-imx25.h

@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_fec_data imx25_fec_data;
+#define imx25_add_fec(pdata)	\
+	imx_add_fec(&imx25_fec_data, pdata)
+
+extern const struct imx_flexcan_data imx25_flexcan_data[];
+#define imx25_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
+#define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
+#define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
+#define imx25_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
+
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
+#define imx25_add_imxdi_rtc()	\
+	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
+
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
+#define imx25_add_imx2_wdt()	\
+	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx25_imx_fb_data;
+#define imx25_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
+#define imx25_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
+#define imx25_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
+#define imx25_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
+#define imx25_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
+#define imx25_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
+#define imx25_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
+#define imx25_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
+#define imx25_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
+#define imx25_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx25_cspi_data[];
+#define imx25_add_spi_imx(id, pdata)	\
+	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
+#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
+
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
+#define imx25_add_mxc_pwm(id)	\
+	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])

arch/arm/mach-imx/devices-imx27.h

@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_fec_data imx27_fec_data;
+#define imx27_add_fec(pdata)	\
+	imx_add_fec(&imx27_fec_data, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
+#define imx27_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx27_coda_data imx27_coda_data;
+#define imx27_add_coda()	\
+	imx_add_imx27_coda(&imx27_coda_data)
+
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
+#define imx27_add_imx2_wdt()	\
+	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx27_imx_fb_data;
+#define imx27_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
+#define imx27_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
+#define imx27_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
+#define imx27_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
+#define imx27_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
+#define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
+#define imx27_add_imx_uart1(pdata)	imx27_add_imx_uart(1, pdata)
+#define imx27_add_imx_uart2(pdata)	imx27_add_imx_uart(2, pdata)
+#define imx27_add_imx_uart3(pdata)	imx27_add_imx_uart(3, pdata)
+#define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
+#define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
+
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
+#define imx27_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
+#define imx27_add_mx2_emmaprp()	\
+	imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
+
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
+#define imx27_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
+#define imx27_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
+#define imx27_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
+#define imx27_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
+#define imx27_add_mxc_w1()	\
+	imx_add_mxc_w1(&imx27_mxc_w1_data)
+
+extern const struct imx_spi_imx_data imx27_cspi_data[];
+#define imx27_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
+#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
+#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
+#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx27_pata_imx_data;
+#define imx27_add_pata_imx() \
+	imx_add_pata_imx(&imx27_pata_imx_data)

arch/arm/mach-imx/devices-imx31.h

@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
+#define imx31_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
+#define imx31_add_imx2_wdt()       \
+	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
+
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
+#define imx31_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
+#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
+#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
+#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
+#define imx31_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
+#define imx31_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
+#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
+#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
+#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
+#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
+#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
+
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core()		\
+	imx_add_ipu_core(&imx31_ipu_core_data)
+#define imx31_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
+#define imx31_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
+#define imx31_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
+#define imx31_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc()	\
+	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
+#define imx31_add_mxc_w1()	\
+	imx_add_mxc_w1(&imx31_mxc_w1_data)
+
+extern const struct imx_spi_imx_data imx31_cspi_data[];
+#define imx31_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
+#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
+#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
+#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx31_pata_imx_data;
+#define imx31_add_pata_imx() \
+	imx_add_pata_imx(&imx31_pata_imx_data)

arch/arm/mach-imx/devices-imx35.h

@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_fec_data imx35_fec_data;
+#define imx35_add_fec(pdata)	\
+	imx_add_fec(&imx35_fec_data, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
+#define imx35_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_flexcan_data imx35_flexcan_data[];
+#define imx35_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
+#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
+#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
+
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
+#define imx35_add_imx2_wdt()       \
+	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
+
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
+#define imx35_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
+#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
+#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
+#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
+#define imx35_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
+#define imx35_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
+#define imx35_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
+#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
+#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
+#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
+
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core()		\
+	imx_add_ipu_core(&imx35_ipu_core_data)
+#define imx35_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
+#define imx35_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
+#define imx35_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
+#define imx35_add_mxc_rtc()	\
+	imx_add_mxc_rtc(&imx35_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
+#define imx35_add_mxc_w1()	\
+	imx_add_mxc_w1(&imx35_mxc_w1_data)
+
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
+#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx35_cspi_data[];
+#define imx35_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
+#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
+#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
+
+extern const struct imx_pata_imx_data imx35_pata_imx_data;
+#define imx35_add_pata_imx() \
+	imx_add_pata_imx(&imx35_pata_imx_data)

arch/arm/mach-imx/devices-imx51.h

@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices/devices-common.h"
+
+extern const struct imx_fec_data imx51_fec_data;
+#define imx51_add_fec(pdata)	\
+	imx_add_fec(&imx51_fec_data, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
+#define imx51_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata)	\
+	imx51_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
+#define imx51_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
+#define imx51_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
+#define imx51_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+
+extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
+#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx51_cspi_data;
+#define imx51_add_cspi(pdata)	\
+	imx_add_spi_imx(&imx51_cspi_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_ecspi_data[];
+#define imx51_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
+
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
+#define imx51_add_imx2_wdt(id)	\
+	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
+
+extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
+#define imx51_add_mxc_pwm(id)	\
+	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
+
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
+#define imx51_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx51_pata_imx_data;
+#define imx51_add_pata_imx() \
+	imx_add_pata_imx(&imx51_pata_imx_data)

arch/arm/mach-imx/devices/Kconfig

@@ -0,0 +1,88 @@
+config IMX_HAVE_PLATFORM_FEC
+	bool
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+
+config IMX_HAVE_PLATFORM_FLEXCAN
+	bool
+	select HAVE_CAN_FLEXCAN if CAN
+
+config IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	bool
+
+config IMX_HAVE_PLATFORM_GPIO_KEYS
+	bool
+	default y if SOC_IMX51
+
+config IMX_HAVE_PLATFORM_IMX21_HCD
+	bool
+
+config IMX_HAVE_PLATFORM_IMX27_CODA
+	bool
+	default y if SOC_IMX27
+
+config IMX_HAVE_PLATFORM_IMX2_WDT
+	bool
+
+config IMX_HAVE_PLATFORM_IMXDI_RTC
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_FB
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_I2C
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_KEYPAD
+	bool
+
+config IMX_HAVE_PLATFORM_PATA_IMX
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_SSI
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_UART
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_UDC
+	bool
+
+config IMX_HAVE_PLATFORM_IPU_CORE
+	bool
+
+config IMX_HAVE_PLATFORM_MX1_CAMERA
+	bool
+
+config IMX_HAVE_PLATFORM_MX2_CAMERA
+	bool
+
+config IMX_HAVE_PLATFORM_MX2_EMMA
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_EHCI
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_MMC
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_NAND
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_PWM
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_RNGA
+	bool
+	select ARCH_HAS_RNGA
+
+config IMX_HAVE_PLATFORM_MXC_RTC
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_W1
+	bool
+
+config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	bool
+
+config IMX_HAVE_PLATFORM_SPI_IMX
+	bool

arch/arm/mach-imx/devices/Makefile

@@ -0,0 +1,32 @@
+obj-y := devices.o
+
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
+obj-y += platform-imx-dma.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/mach-imx/devices/devices-common.h

@@ -0,0 +1,346 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/platform_data/dma-imx-sdma.h>
+
+extern struct device mxc_aips_bus;
+extern struct device mxc_ahb_bus;
+
+static inline struct platform_device *imx_add_platform_device_dmamask(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data, u64 dmamask)
+{
+	struct platform_device_info pdevinfo = {
+		.name = name,
+		.id = id,
+		.res = res,
+		.num_res = num_resources,
+		.data = data,
+		.size_data = size_data,
+		.dma_mask = dmamask,
+	};
+	return platform_device_register_full(&pdevinfo);
+}
+
+static inline struct platform_device *imx_add_platform_device(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	return imx_add_platform_device_dmamask(
+			name, id, res, num_resources, data, size_data, 0);
+}
+
+#include <linux/fec.h>
+struct imx_fec_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata);
+
+#include <linux/can/platform/flexcan.h>
+struct imx_flexcan_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_flexcan(
+		const struct imx_flexcan_data *data,
+		const struct flexcan_platform_data *pdata);
+
+#include <linux/fsl_devices.h>
+struct imx_fsl_usb2_udc_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_fsl_usb2_udc(
+		const struct imx_fsl_usb2_udc_data *data,
+		const struct fsl_usb2_platform_data *pdata);
+
+#include <linux/gpio_keys.h>
+struct platform_device *__init imx_add_gpio_keys(
+		const struct gpio_keys_platform_data *pdata);
+
+#include <linux/platform_data/usb-mx2.h>
+struct imx_imx21_hcd_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx21_hcd(
+		const struct imx_imx21_hcd_data *data,
+		const struct mx21_usbh_platform_data *pdata);
+
+struct imx_imx27_coda_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx27_coda(
+		const struct imx_imx27_coda_data *data);
+
+struct imx_imx2_wdt_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+};
+struct platform_device *__init imx_add_imx2_wdt(
+		const struct imx_imx2_wdt_data *data);
+
+struct imx_imxdi_rtc_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imxdi_rtc(
+		const struct imx_imxdi_rtc_data *data);
+
+#include <linux/platform_data/video-imxfb.h>
+struct imx_imx_fb_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_fb(
+		const struct imx_imx_fb_data *data,
+		const struct imx_fb_platform_data *pdata);
+
+#include <linux/platform_data/i2c-imx.h>
+struct imx_imx_i2c_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
+		const struct imxi2c_platform_data *pdata);
+
+#include <linux/input/matrix_keypad.h>
+struct imx_imx_keypad_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_keypad(
+		const struct imx_imx_keypad_data *data,
+		const struct matrix_keymap_data *pdata);
+
+#include <linux/platform_data/asoc-imx-ssi.h>
+struct imx_imx_ssi_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+	resource_size_t dmatx0;
+	resource_size_t dmarx0;
+	resource_size_t dmatx1;
+	resource_size_t dmarx1;
+};
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata);
+
+#include <linux/platform_data/serial-imx.h>
+struct imx_imx_uart_3irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irqrx;
+	resource_size_t irqtx;
+	resource_size_t irqrts;
+};
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
+		const struct imxuart_platform_data *pdata);
+
+struct imx_imx_uart_1irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
+		const struct imxuart_platform_data *pdata);
+
+#include <linux/platform_data/usb-imx_udc.h>
+struct imx_imx_udc_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq0;
+	resource_size_t irq1;
+	resource_size_t irq2;
+	resource_size_t irq3;
+	resource_size_t irq4;
+	resource_size_t irq5;
+	resource_size_t irq6;
+};
+struct platform_device *__init imx_add_imx_udc(
+		const struct imx_imx_udc_data *data,
+		const struct imxusb_platform_data *pdata);
+
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
+struct imx_ipu_core_data {
+	resource_size_t iobase;
+	resource_size_t synirq;
+	resource_size_t errirq;
+};
+struct platform_device *__init imx_add_ipu_core(
+		const struct imx_ipu_core_data *data);
+struct platform_device *__init imx_alloc_mx3_camera(
+		const struct imx_ipu_core_data *data,
+		const struct mx3_camera_pdata *pdata);
+struct platform_device *__init imx_add_mx3_sdc_fb(
+		const struct imx_ipu_core_data *data,
+		struct mx3fb_platform_data *pdata);
+
+#include <linux/platform_data/camera-mx1.h>
+struct imx_mx1_camera_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mx1_camera(
+		const struct imx_mx1_camera_data *data,
+		const struct mx1_camera_pdata *pdata);
+
+#include <linux/platform_data/camera-mx2.h>
+struct imx_mx2_camera_data {
+	const char *devid;
+	resource_size_t iobasecsi;
+	resource_size_t iosizecsi;
+	resource_size_t irqcsi;
+	resource_size_t iobaseemmaprp;
+	resource_size_t iosizeemmaprp;
+	resource_size_t irqemmaprp;
+};
+struct platform_device *__init imx_add_mx2_camera(
+		const struct imx_mx2_camera_data *data,
+		const struct mx2_camera_platform_data *pdata);
+
+
+struct imx_mx2_emma_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mx2_emmaprp(
+		const struct imx_mx2_emma_data *data);
+
+#include <linux/platform_data/usb-ehci-mxc.h>
+struct imx_mxc_ehci_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_ehci(
+		const struct imx_mxc_ehci_data *data,
+		const struct mxc_usbh_platform_data *pdata);
+
+#include <linux/platform_data/mmc-mxcmmc.h>
+struct imx_mxc_mmc_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+	resource_size_t dmareq;
+};
+struct platform_device *__init imx_add_mxc_mmc(
+		const struct imx_mxc_mmc_data *data,
+		const struct imxmmc_platform_data *pdata);
+
+#include <linux/platform_data/mtd-mxc_nand.h>
+struct imx_mxc_nand_data {
+	const char *devid;
+	/*
+	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
+	 * machines but don't change existing devices as the nand device usually
+	 * appears in the kernel command line to pass its partitioning.
+	 */
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t axibase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata);
+
+struct imx_pata_imx_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_pata_imx(
+		const struct imx_pata_imx_data *data);
+
+struct imx_mxc_pwm_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_pwm(
+		const struct imx_mxc_pwm_data *data);
+
+/* mxc_rtc */
+struct imx_mxc_rtc_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_rtc(
+		const struct imx_mxc_rtc_data *data);
+
+/* mxc_w1 */
+struct imx_mxc_w1_data {
+	resource_size_t iobase;
+};
+struct platform_device *__init imx_add_mxc_w1(
+		const struct imx_mxc_w1_data *data);
+
+#include <linux/platform_data/mmc-esdhc-imx.h>
+struct imx_sdhci_esdhc_imx_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+		const struct imx_sdhci_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata);
+
+#include <linux/platform_data/spi-imx.h>
+struct imx_spi_imx_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	int irq;
+};
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
+		const struct spi_imx_master *pdata);
+
+struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
+					int irq, int irq_err);
+struct platform_device *imx_add_imx_sdma(char *name,
+	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);

arch/arm/mach-imx/devices/devices.c

@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+struct device mxc_aips_bus = {
+	.init_name	= "mxc_aips",
+	.parent		= &platform_bus,
+};
+
+struct device mxc_ahb_bus = {
+	.init_name	= "mxc_ahb",
+	.parent		= &platform_bus,
+};
+
+int __init mxc_device_init(void)
+{
+	int ret;
+
+	ret = device_register(&mxc_aips_bus);
+	if (ret < 0)
+		goto done;
+
+	ret = device_register(&mxc_ahb_bus);
+
+done:
+	return ret;
+}

arch/arm/mach-imx/devices/platform-fec.c

@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_fec_data_entry_single(soc, _devid)				\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _FEC_BASE_ADDR,			\
+		.irq = soc ## _INT_FEC,					\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_fec_data imx25_fec_data __initconst =
+	imx_fec_data_entry_single(MX25, "imx25-fec");
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fec_data imx27_fec_data __initconst =
+	imx_fec_data_entry_single(MX27, "imx27-fec");
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX35
+/* i.mx35 has the i.mx27 type fec */
+const struct imx_fec_data imx35_fec_data __initconst =
+	imx_fec_data_entry_single(MX35, "imx27-fec");
+#endif
+
+#ifdef CONFIG_SOC_IMX51
+/* i.mx51 has the i.mx27 type fec */
+const struct imx_fec_data imx51_fec_data __initconst =
+	imx_fec_data_entry_single(MX51, "imx27-fec");
+#endif
+
+#ifdef CONFIG_SOC_IMX53
+/* i.mx53 has the i.mx25 type fec */
+const struct imx_fec_data imx53_fec_data __initconst =
+	imx_fec_data_entry_single(MX53, "imx25-fec");
+#endif
+
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device_dmamask(data->devid, 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-flexcan.c

@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_CAN ## _hwid,			\
+	}
+
+#define imx_flexcan_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
+#define imx25_flexcan_data_entry(_id, _hwid)				\
+	imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_flexcan_data_entry(0, 1),
+	imx25_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
+#define imx35_flexcan_data_entry(_id, _hwid)				\
+	imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
+	imx35_flexcan_data_entry(0, 1),
+	imx35_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_flexcan(
+		const struct imx_flexcan_data *data,
+		const struct flexcan_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("flexcan", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
+		.irq = soc ## _INT_USB_OTG,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
+#endif
+
+struct platform_device *__init imx_add_fsl_usb2_udc(
+		const struct imx_fsl_usb2_udc_data *data,
+		const struct fsl_usb2_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_512 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask(data->devid, -1,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-gpio-mxc.c

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices-common.h"
+
+struct platform_device *__init mxc_register_gpio(char *name, int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irq_high,
+			.end = irq_high,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxc_aips_bus,
+			name, id, res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-gpio_keys.c

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+#include <asm/sizes.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+struct platform_device *__init imx_add_gpio_keys(
+		const struct gpio_keys_platform_data *pdata)
+{
+	return imx_add_platform_device("gpio-keys", -1, NULL,
+		 0, pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx-dma.c

@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "devices-common.h"
+
+struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
+	resource_size_t iobase, int irq, int irq_err)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irq_err,
+			.end = irq_err,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxc_ahb_bus,
+			name, -1, res, ARRAY_SIZE(res), NULL, 0);
+}
+
+struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
+	resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxc_ahb_bus, name,
+			-1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx-fb.c

@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_fb_data_entry_single(soc, _devid, _size)		\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _LCDC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_LCDC,				\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_imx_fb(
+		const struct imx_imx_fb_data *data,
+		const struct imx_fb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask(data->devid, 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-imx-i2c.c

@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)	\
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_I2C ## _hwid,			\
+	}
+
+#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
+	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
+#define imx25_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
+	imx25_imx_i2c_data_entry(0, 1),
+	imx25_imx_i2c_data_entry(1, 2),
+	imx25_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
+#define imx27_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
+	imx27_imx_i2c_data_entry(0, 1),
+	imx27_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
+#define imx31_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
+	imx31_imx_i2c_data_entry(0, 1),
+	imx31_imx_i2c_data_entry(1, 2),
+	imx31_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
+#define imx35_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
+	imx35_imx_i2c_data_entry(0, 1),
+	imx35_imx_i2c_data_entry(1, 2),
+	imx35_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
+#define imx51_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
+	imx51_imx_i2c_data_entry(0, 1),
+	imx51_imx_i2c_data_entry(1, 2),
+	{
+		.devid = "imx21-i2c",
+		.id = 2,
+		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
+		.iosize = SZ_16K,
+		.irq = MX51_INT_HS_I2C,
+	},
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
+#define imx53_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
+	imx53_imx_i2c_data_entry(0, 1),
+	imx53_imx_i2c_data_entry(1, 2),
+	imx53_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
+		const struct imxi2c_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device(data->devid, data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx-keypad.c

@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_keypad_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _KPP_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_KPP,					\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX21, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX25, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX27, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX31, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX35, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX51, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX53, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_imx_keypad(
+		const struct imx_imx_keypad_data *data,
+		const struct matrix_keymap_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-keypad", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx-ssi.c

@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_SSI ## _hwid,			\
+		.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0,		\
+		.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0,		\
+		.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1,		\
+		.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1,		\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
+#define imx21_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_ssi_data_entry(0, 1),
+	imx21_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
+#define imx25_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
+	imx25_imx_ssi_data_entry(0, 1),
+	imx25_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
+#define imx27_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_ssi_data_entry(0, 1),
+	imx27_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
+#define imx31_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_ssi_data_entry(0, 1),
+	imx31_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
+#define imx35_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx35_imx_ssi_data_entry(0, 1),
+	imx35_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
+#define imx51_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
+	imx51_imx_ssi_data_entry(0, 1),
+	imx51_imx_ssi_data_entry(1, 2),
+	imx51_imx_ssi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
+#define imx53_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
+	imx53_imx_ssi_data_entry(0, 1),
+	imx53_imx_ssi_data_entry(1, 2),
+	imx53_imx_ssi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+#define DMARES(_name) {							\
+	.name = #_name,							\
+	.start = data->dma ## _name,					\
+	.end = data->dma ## _name,					\
+	.flags = IORESOURCE_DMA,					\
+}
+		DMARES(tx0),
+		DMARES(rx0),
+		DMARES(tx1),
+		DMARES(rx1),
+	};
+
+	return imx_add_platform_device("imx-ssi", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx-uart.c

@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irqrx = soc ## _INT_UART ## _hwid ## RX,		\
+		.irqtx = soc ## _INT_UART ## _hwid ## TX,		\
+		.irqrts = soc ## _INT_UART ## _hwid ## RTS,		\
+	}
+
+#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_UART ## _hwid,			\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
+#define imx1_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
+	imx1_imx_uart_data_entry(0, 1),
+	imx1_imx_uart_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
+#define imx21_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_uart_data_entry(0, 1),
+	imx21_imx_uart_data_entry(1, 2),
+	imx21_imx_uart_data_entry(2, 3),
+	imx21_imx_uart_data_entry(3, 4),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
+#define imx25_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_imx_uart_data_entry(0, 1),
+	imx25_imx_uart_data_entry(1, 2),
+	imx25_imx_uart_data_entry(2, 3),
+	imx25_imx_uart_data_entry(3, 4),
+	imx25_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
+#define imx27_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_uart_data_entry(0, 1),
+	imx27_imx_uart_data_entry(1, 2),
+	imx27_imx_uart_data_entry(2, 3),
+	imx27_imx_uart_data_entry(3, 4),
+	imx27_imx_uart_data_entry(4, 5),
+	imx27_imx_uart_data_entry(5, 6),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
+#define imx31_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_uart_data_entry(0, 1),
+	imx31_imx_uart_data_entry(1, 2),
+	imx31_imx_uart_data_entry(2, 3),
+	imx31_imx_uart_data_entry(3, 4),
+	imx31_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
+#define imx35_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
+	imx35_imx_uart_data_entry(0, 1),
+	imx35_imx_uart_data_entry(1, 2),
+	imx35_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
+#define imx51_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_uart_data_entry(0, 1),
+	imx51_imx_uart_data_entry(1, 2),
+	imx51_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
+#define imx53_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
+	imx53_imx_uart_data_entry(0, 1),
+	imx53_imx_uart_data_entry(1, 2),
+	imx53_imx_uart_data_entry(2, 3),
+	imx53_imx_uart_data_entry(3, 4),
+	imx53_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqrx,
+			.end = data->irqrx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irqtx,
+			.end = data->irqtx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irqrts,
+			.end = data->irqrx,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx1-uart", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	/* i.mx21 type uart runs on all i.mx except i.mx1 */
+	return imx_add_platform_device("imx21-uart", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imx2-wdt.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+	}
+#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
+#define imx51_imx2_wdt_data_entry(_id, _hwid)				\
+	imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
+	imx51_imx2_wdt_data_entry(0, 1),
+	imx51_imx2_wdt_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
+#define imx53_imx2_wdt_data_entry(_id, _hwid)				\
+	imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
+	imx53_imx2_wdt_data_entry(0, 1),
+	imx53_imx2_wdt_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_imx2_wdt(
+		const struct imx_imx2_wdt_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	return imx_add_platform_device("imx2-wdt", data->id,
+			res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-imx21-hcd.c

@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx21_hcd_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _USBOTG_BASE_ADDR,			\
+		.irq = soc ## _INT_USBHOST,				\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
+	imx_imx21_hcd_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+struct platform_device *__init imx_add_imx21_hcd(
+		const struct imx_imx21_hcd_data *data,
+		const struct mx21_usbh_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("imx21-hcd", 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-imx27-coda.c

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Vista Silicon
+ * Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx27_coda_data imx27_coda_data __initconst = {
+	.iobase = MX27_VPU_BASE_ADDR,
+	.iosize = SZ_512,
+	.irq = MX27_INT_VPU,
+};
+#endif
+
+struct platform_device *__init imx_add_imx27_coda(
+		const struct imx_imx27_coda_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
+					0, DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-imx_udc.c

@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_udc_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _USBD_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq0 = soc ## _INT_USBD0,				\
+		.irq1 = soc ## _INT_USBD1,				\
+		.irq2 = soc ## _INT_USBD2,				\
+		.irq3 = soc ## _INT_USBD3,				\
+		.irq4 = soc ## _INT_USBD4,				\
+		.irq5 = soc ## _INT_USBD5,				\
+		.irq6 = soc ## _INT_USBD6,				\
+	}
+
+#define imx_imx_udc_data_entry(soc, _size)				\
+	[_id] = imx_imx_udc_data_entry_single(soc, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
+	imx_imx_udc_data_entry_single(MX1, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_imx_udc(
+		const struct imx_imx_udc_data *data,
+		const struct imxusb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq0,
+			.end = data->irq0,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq1,
+			.end = data->irq1,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq2,
+			.end = data->irq2,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq3,
+			.end = data->irq3,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq4,
+			.end = data->irq4,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq5,
+			.end = data->irq5,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq6,
+			.end = data->irq6,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx_udc", 0,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-imxdi_rtc.c

@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imxdi_rtc_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _DRYICE_BASE_ADDR,			\
+		.irq = soc ## _INT_DRYICE,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
+	imx_imxdi_rtc_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+struct platform_device *__init imx_add_imxdi_rtc(
+		const struct imx_imxdi_rtc_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imxdi_rtc", 0,
+			res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-ipu-core.c

@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_ipu_core_entry_single(soc)					\
+{									\
+	.iobase = soc ## _IPU_CTRL_BASE_ADDR,				\
+	.synirq = soc ## _INT_IPU_SYN,					\
+	.errirq = soc ## _INT_IPU_ERR,					\
+}
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
+	imx_ipu_core_entry_single(MX31);
+#endif
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
+	imx_ipu_core_entry_single(MX35);
+#endif
+
+static struct platform_device *imx_ipu_coredev __initdata;
+
+struct platform_device *__init imx_add_ipu_core(
+		const struct imx_ipu_core_data *data)
+{
+	/* The resource order is important! */
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + 0x5f,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->iobase + 0x88,
+			.end = data->iobase + 0xb3,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->synirq,
+			.end = data->synirq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->errirq,
+			.end = data->errirq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
+
+struct platform_device *__init imx_alloc_mx3_camera(
+		const struct imx_ipu_core_data *data,
+		const struct mx3_camera_pdata *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase + 0x60,
+			.end = data->iobase + 0x87,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	if (IS_ERR_OR_NULL(imx_ipu_coredev))
+		return ERR_PTR(-ENODEV);
+
+	pdev = platform_device_alloc("mx3-camera", 0);
+	if (!pdev)
+		goto err;
+
+	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+	if (!pdev->dev.dma_mask)
+		goto err;
+
+	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret)
+		goto err;
+
+	if (pdata) {
+		struct mx3_camera_pdata *copied_pdata;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+		if (ret) {
+err:
+			kfree(pdev->dev.dma_mask);
+			platform_device_put(pdev);
+			return ERR_PTR(-ENODEV);
+		}
+		copied_pdata = dev_get_platdata(&pdev->dev);
+		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
+	}
+
+	return pdev;
+}
+
+struct platform_device *__init imx_add_mx3_sdc_fb(
+		const struct imx_ipu_core_data *data,
+		struct mx3fb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase + 0xb4,
+			.end = data->iobase + 0x1bf,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	if (IS_ERR_OR_NULL(imx_ipu_coredev))
+		return ERR_PTR(-ENODEV);
+
+	pdata->dma_dev = &imx_ipu_coredev->dev;
+
+	return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-mx1-camera.c

@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mx1_camera_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _CSI ## _BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_CSI,					\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
+	imx_mx1_camera_data_entry_single(MX1, 10);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_mx1_camera(
+		const struct imx_mx1_camera_data *data,
+		const struct mx1_camera_pdata *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("mx1-camera", 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-mx2-camera.c

@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mx2_camera_data_entry_single(soc, _devid)			\
+	{								\
+		.devid = _devid,					\
+		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
+		.iosizecsi = SZ_4K,					\
+		.irqcsi = soc ## _INT_CSI,				\
+	}
+#define imx_mx2_camera_data_entry_single_emma(soc, _devid)		\
+	{								\
+		.devid = _devid,					\
+		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
+		.iosizecsi = SZ_32,					\
+		.irqcsi = soc ## _INT_CSI,				\
+		.iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR,		\
+		.iosizeemmaprp = SZ_32,					\
+		.irqemmaprp = soc ## _INT_EMMAPRP,			\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
+	imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
+	imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_camera(
+		const struct imx_mx2_camera_data *data,
+		const struct mx2_camera_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobasecsi,
+			.end = data->iobasecsi + data->iosizecsi - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqcsi,
+			.end = data->irqcsi,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->iobaseemmaprp,
+			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqemmaprp,
+			.end = data->irqemmaprp,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask(data->devid, 0,
+			res, data->iobaseemmaprp ? 4 : 2,
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
+

arch/arm/mach-imx/devices/platform-mx2-emma.c

@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mx2_emmaprp_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _EMMAPRP_BASE_ADDR,			\
+		.iosize = SZ_32,					\
+		.irq = soc ## _INT_EMMAPRP,				\
+	}
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
+	imx_mx2_emmaprp_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_emmaprp(
+		const struct imx_mx2_emma_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
+			res, 2, NULL, 0, DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-mxc-ehci.c

@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_ehci_data_entry_single(soc, _id, hs)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _USB_ ## hs ## _BASE_ADDR,		\
+		.irq = soc ## _INT_USB_ ## hs,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
+const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX25, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
+const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
+const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
+const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX35, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
+const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_mxc_ehci(
+		const struct imx_mxc_ehci_data *data,
+		const struct mxc_usbh_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_512 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("mxc-ehci", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-mxc-mmc.c

@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/dma-mapping.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)	\
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_SDHC ## _hwid,			\
+		.dmareq = soc ## _DMA_REQ_SDHC ## _hwid,		\
+	}
+#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size)		\
+	[_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
+#define imx21_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
+	imx21_mxc_mmc_data_entry(0, 1),
+	imx21_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
+#define imx27_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
+	imx27_mxc_mmc_data_entry(0, 1),
+	imx27_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
+#define imx31_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
+	imx31_mxc_mmc_data_entry(0, 1),
+	imx31_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+struct platform_device *__init imx_add_mxc_mmc(
+		const struct imx_mxc_mmc_data *data,
+		const struct imxmmc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dmareq,
+			.end = data->dmareq,
+			.flags = IORESOURCE_DMA,
+		},
+	};
+	return imx_add_platform_device_dmamask(data->devid, data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}

arch/arm/mach-imx/devices/platform-mxc_nand.c

@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_nand_data_entry_single(soc, _devid, _size)		\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size)		\
+	{								\
+		.devid = _devid,					\
+		.id = -1,						\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.axibase = soc ## _NFC_AXI_BASE_ADDR,			\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
+#endif
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
+#endif
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
+	imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
+#endif
+
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata)
+{
+	/* AXI has to come first, that's how the mxc_nand driver expect it */
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->axibase,
+			.end = data->axibase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	return imx_add_platform_device(data->devid, data->id,
+			res, ARRAY_SIZE(res) - !data->axibase,
+			pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-mxc_pwm.c

@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_PWM ## _hwid,			\
+	}
+#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
+	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
+#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
+	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_mxc_pwm_data_entry(0, 1),
+	imx25_mxc_pwm_data_entry(1, 2),
+	imx25_mxc_pwm_data_entry(2, 3),
+	imx25_mxc_pwm_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
+	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
+#define imx51_mxc_pwm_data_entry(_id, _hwid)				\
+	imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
+	imx51_mxc_pwm_data_entry(0, 1),
+	imx51_mxc_pwm_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_mxc_pwm(
+		const struct imx_mxc_pwm_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("mxc_pwm", data->id,
+			res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-mxc_rnga.c

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+struct imx_mxc_rnga_data {
+	resource_size_t iobase;
+};
+
+#define imx_mxc_rnga_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _RNGA_BASE_ADDR,			\
+	}
+
+#ifdef CONFIG_SOC_IMX31
+static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
+	imx_mxc_rnga_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+static struct platform_device *__init imx_add_mxc_rnga(
+		const struct imx_mxc_rnga_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	return imx_add_platform_device("mxc_rnga", -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
+
+static int __init imxXX_add_mxc_rnga(void)
+{
+	struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX31)
+	if (cpu_is_mx31())
+		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
+	else
+#endif /* if defined(CONFIG_SOC_IMX31) */
+		ret = ERR_PTR(-ENODEV);
+
+	if (IS_ERR(ret))
+		return PTR_ERR(ret);
+
+	return 0;
+}
+arch_initcall(imxXX_add_mxc_rnga);

arch/arm/mach-imx/devices/platform-mxc_rtc.c

@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2010-2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_rtc_data_entry_single(soc, _devid)			\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _RTC_BASE_ADDR,			\
+		.irq = soc ## _INT_RTC,					\
+	}
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
+	imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
+	imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_rtc(
+		const struct imx_mxc_rtc_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device(data->devid, -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-mxc_w1.c

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_w1_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _OWIRE_BASE_ADDR,			\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_w1(
+		const struct imx_mxc_w1_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	return imx_add_platform_device("mxc_w1", 0,
+			res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-imx/devices/platform-pata_imx.c

@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_pata_imx_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _ATA_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_ATA,					\
+	}
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
+	imx_pata_imx_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
+	imx_pata_imx_data_entry_single(MX31, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
+	imx_pata_imx_data_entry_single(MX35, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
+	imx_pata_imx_data_entry_single(MX51, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
+	imx_pata_imx_data_entry_single(MX53, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_pata_imx(
+		const struct imx_pata_imx_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device("pata_imx", -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
+

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/platform_data/mmc-esdhc-imx.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
+		.irq = soc ## _INT_ESDHC ## hwid,			\
+	}
+
+#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid)	\
+	[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst = {
+#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid)
+	imx25_sdhci_esdhc_imx_data_entry(0, 1),
+	imx25_sdhci_esdhc_imx_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst = {
+#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
+	imx35_sdhci_esdhc_imx_data_entry(0, 1),
+	imx35_sdhci_esdhc_imx_data_entry(1, 2),
+	imx35_sdhci_esdhc_imx_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_sdhci_esdhc_imx_data
+imx51_sdhci_esdhc_imx_data[] __initconst = {
+#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
+	imx51_sdhci_esdhc_imx_data_entry(0, 1),
+	imx51_sdhci_esdhc_imx_data_entry(1, 2),
+	imx51_sdhci_esdhc_imx_data_entry(2, 3),
+	imx51_sdhci_esdhc_imx_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_sdhci_esdhc_imx_data
+imx53_sdhci_esdhc_imx_data[] __initconst = {
+#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
+	imx53_sdhci_esdhc_imx_data_entry(0, 1),
+	imx53_sdhci_esdhc_imx_data_entry(1, 2),
+	imx53_sdhci_esdhc_imx_data_entry(2, 3),
+	imx53_sdhci_esdhc_imx_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
+	.wp_type = ESDHC_WP_NONE,
+	.cd_type = ESDHC_CD_NONE,
+};
+
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+		const struct imx_sdhci_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	/*
+	 * If machine does not provide pdata, use the default one
+	 * which means no WP/CD support
+	 */
+	if (!pdata)
+		pdata = &default_esdhc_pdata;
+
+	return imx_add_platform_device(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/devices/platform-spi_imx.c

@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR,	\
+		.iosize = _size,					\
+		.irq = soc ## _INT_ ## type ## hwid,			\
+	}
+
+#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
+	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
+#define imx1_cspi_data_entry(_id, _hwid) \
+	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
+	imx1_cspi_data_entry(0, 1),
+	imx1_cspi_data_entry(1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
+#define imx21_cspi_data_entry(_id, _hwid)                            \
+	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
+	imx21_cspi_data_entry(0, 1),
+	imx21_cspi_data_entry(1, 2),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX25
+/* i.mx25 has the i.mx35 type cspi */
+const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
+#define imx25_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
+	imx25_cspi_data_entry(0, 1),
+	imx25_cspi_data_entry(1, 2),
+	imx25_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
+#define imx27_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
+	imx27_cspi_data_entry(0, 1),
+	imx27_cspi_data_entry(1, 2),
+	imx27_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
+#define imx31_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
+	imx31_cspi_data_entry(0, 1),
+	imx31_cspi_data_entry(1, 2),
+	imx31_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
+#define imx35_cspi_data_entry(_id, _hwid)                           \
+	imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
+	imx35_cspi_data_entry(0, 1),
+	imx35_cspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+/* i.mx51 has the i.mx35 type cspi */
+const struct imx_spi_imx_data imx51_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
+
+const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
+#define imx51_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
+	imx51_ecspi_data_entry(0, 1),
+	imx51_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+/* i.mx53 has the i.mx35 type cspi */
+const struct imx_spi_imx_data imx53_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
+
+/* i.mx53 has the i.mx51 type ecspi */
+const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
+#define imx53_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
+	imx53_ecspi_data_entry(0, 1),
+	imx53_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
+		const struct spi_imx_master *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device(data->devid, data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}

arch/arm/mach-imx/ehci-imx25.c

@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
+
+#include "hardware.h"
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX25_OTG_SIC_SHIFT	29
+#define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT		(1 << 24)
+#define MX25_OTG_PP_BIT		(1 << 11)
+#define MX25_OTG_OCPOL_BIT	(1 << 3)
+
+#define MX25_H1_SIC_SHIFT	21
+#define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT		(1 << 18)
+#define MX25_H1_PM_BIT		(1 << 16)
+#define MX25_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX25_H1_TLL_BIT		(1 << 5)
+#define MX25_H1_USBTE_BIT	(1 << 4)
+#define MX25_H1_OCPOL_BIT	(1 << 2)
+
+int mx25_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+			MX25_OTG_OCPOL_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_OTG_PM_BIT;
+
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX25_OTG_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX25_OTG_OCPOL_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+			MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
+			MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX25_H1_PM_BIT;
+
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX25_H1_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX25_H1_OCPOL_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX25_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX25_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX25_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX25_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+

arch/arm/mach-imx/ehci-imx27.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
+
+#include "hardware.h"
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX27_OTG_SIC_SHIFT	29
+#define MX27_OTG_SIC_MASK	(0x3 << MX27_OTG_SIC_SHIFT)
+#define MX27_OTG_PM_BIT		(1 << 24)
+
+#define MX27_H2_SIC_SHIFT	21
+#define MX27_H2_SIC_MASK	(0x3 << MX27_H2_SIC_SHIFT)
+#define MX27_H2_PM_BIT		(1 << 16)
+#define MX27_H2_DT_BIT		(1 << 5)
+
+#define MX27_H1_SIC_SHIFT	13
+#define MX27_H1_SIC_MASK	(0x3 << MX27_H1_SIC_SHIFT)
+#define MX27_H1_PM_BIT		(1 << 8)
+#define MX27_H1_DT_BIT		(1 << 4)
+
+int mx27_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_OTG_PM_BIT;
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX27_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX27_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+

arch/arm/mach-imx/ehci-imx31.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
+
+#include "hardware.h"
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}

arch/arm/mach-imx/ehci-imx35.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
+
+#include "hardware.h"
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+#define MX35_OTG_PP_BIT		(1 << 11)
+#define MX35_OTG_OCPOL_BIT	(1 << 3)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT		(1 << 18)
+#define MX35_H1_PM_BIT		(1 << 16)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+#define MX35_H1_OCPOL_BIT	(1 << 2)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+			MX35_OTG_OCPOL_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX35_OTG_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX35_OTG_OCPOL_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+			MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
+			MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+			v |= MX35_H1_PP_BIT;
+
+		if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+			v |= MX35_H1_OCPOL_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}

arch/arm/mach-imx/ehci-imx5.c

@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
+
+#include "hardware.h"
+
+#define MXC_OTG_OFFSET			0
+#define MXC_H1_OFFSET			0x200
+#define MXC_H2_OFFSET			0x400
+
+/* USB_CTRL */
+#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
+#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)	/* HOST1 power mask */
+
+/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)	/* OTG Polarity of Overcurrent */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_POL_BIT		(1 << 6)	/* UH1 Polarity of Overcurrent */
+#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)	/* OTG Power Pin Polarity */
+
+/* USBH2CTRL */
+#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
+
+#define MXC_USBCMD_OFFSET		0x140
+
+/* USBCMD */
+#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
+
+int mx51_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+	void __iomem *usb_base;
+	void __iomem *usbotg_base;
+	void __iomem *usbother_base;
+	int ret = 0;
+
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base) {
+		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
+		return -ENOMEM;
+	}
+
+	switch (port) {
+	case 0:	/* OTG port */
+		usbotg_base = usb_base + MXC_OTG_OFFSET;
+		break;
+	case 1:	/* Host 1 port */
+		usbotg_base = usb_base + MXC_H1_OFFSET;
+		break;
+	case 2: /* Host 2 port */
+		usbotg_base = usb_base + MXC_H2_OFFSET;
+		break;
+	default:
+		printk(KERN_ERR"%s no such port %d\n", __func__, port);
+		ret = -ENOENT;
+		goto error;
+	}
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	switch (port) {
+	case 0:	/*OTG port */
+		if (flags & MXC_EHCI_INTERNAL_PHY) {
+			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+				/* OC/USBPWR is used */
+				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			} else {
+				/* OC/USBPWR is not used */
+				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			}
+			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
+			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED)
+				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
+			else
+				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			else
+				v |= MXC_OTG_UCTRL_OPM_BIT;
+			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+		}
+		break;
+	case 1:	/* Host 1 */
+		/*Host ULPI */
+		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
+		else
+			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+
+		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H1_OC_POL_BIT;
+		else
+			v &= ~MXC_H1_OC_POL_BIT;
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
+		else
+			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
+		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
+		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
+			/* Interrupt Threshold Control:Immediate (no threshold) */
+			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
+		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
+		break;
+	case 2: /* Host 2 ULPI */
+		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+			/* HOST1 wakeup/ULPI intr enable */
+			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		} else {
+			/* HOST1 wakeup/ULPI intr disable */
+			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+		}
+
+		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
+		else
+			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
+		break;
+	}
+
+error:
+	iounmap(usb_base);
+	return ret;
+}
+

arch/arm/mach-imx/epit.c

@@ -0,0 +1,225 @@
+/*
+ *  linux/arch/arm/plat-mxc/epit.c
+ *
+ *  Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define EPITCR		0x00
+#define EPITSR		0x04
+#define EPITLR		0x08
+#define EPITCMPR	0x0c
+#define EPITCNR		0x10
+
+#define EPITCR_EN			(1 << 0)
+#define EPITCR_ENMOD			(1 << 1)
+#define EPITCR_OCIEN			(1 << 2)
+#define EPITCR_RLD			(1 << 3)
+#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
+#define EPITCR_SWR			(1 << 16)
+#define EPITCR_IOVW			(1 << 17)
+#define EPITCR_DBGEN			(1 << 18)
+#define EPITCR_WAITEN			(1 << 19)
+#define EPITCR_RES			(1 << 20)
+#define EPITCR_STOPEN			(1 << 21)
+#define EPITCR_OM_DISCON		(0 << 22)
+#define EPITCR_OM_TOGGLE		(1 << 22)
+#define EPITCR_OM_CLEAR			(2 << 22)
+#define EPITCR_OM_SET			(3 << 22)
+#define EPITCR_CLKSRC_OFF		(0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH		(1 << 24)
+#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
+
+#define EPITSR_OCIF			(1 << 0)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static struct clock_event_device clockevent_epit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void epit_irq_disable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val &= ~EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static inline void epit_irq_enable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val |= EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static void epit_irq_acknowledge(void)
+{
+	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+}
+
+static int __init epit_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+			clocksource_mmio_readl_down);
+}
+
+/* clock event */
+
+static int epit_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + EPITCNR);
+
+	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
+
+	return 0;
+}
+
+static void epit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	epit_irq_disable();
+
+	if (mode != clockevent_mode) {
+		/* Set event time into far-far future */
+
+		/* Clear pending interrupt */
+		epit_irq_acknowledge();
+	}
+
+	/* Remember timer mode */
+	clockevent_mode = mode;
+	local_irq_restore(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
+				"supported for i.MX EPIT\n");
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * epit_set_next_event(), the core has about 4 minutes
+	 * to call epit_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+		local_irq_save(flags);
+		epit_irq_enable();
+		local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_epit;
+
+	epit_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction epit_timer_irq = {
+	.name		= "i.MX EPIT Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= epit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_epit = {
+	.name		= "epit",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= epit_set_mode,
+	.set_next_event	= epit_set_next_event,
+	.rating		= 200,
+};
+
+static int __init epit_clockevent_init(struct clk *timer_clk)
+{
+	clockevent_epit.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&clockevent_epit,
+					clk_get_rate(timer_clk),
+					0x800, 0xfffffffe);
+
+	return 0;
+}
+
+void __init epit_timer_init(void __iomem *base, int irq)
+{
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("imx-epit.0", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("i.MX epit: unable to get clk\n");
+		return;
+	}
+
+	clk_prepare_enable(timer_clk);
+
+	timer_base = base;
+
+	/*
+	 * Initialise to a known state (all timers off, and timing reset)
+	 */
+	__raw_writel(0x0, timer_base + EPITCR);
+
+	__raw_writel(0xffffffff, timer_base + EPITLR);
+	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+			timer_base + EPITCR);
+
+	/* init and register the timer to the framework */
+	epit_clocksource_init(timer_clk);
+	epit_clockevent_init(timer_clk);
+
+	/* Make irqs happen */
+	setup_irq(irq, &epit_timer_irq);
+}

arch/arm/mach-imx/eukrea-baseboards.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_EUKREA_BASEBOARDS_H__
+#define __MACH_EUKREA_BASEBOARDS_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
+ * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
+ * or eukrea_cpuimx51sd_init().
+ *
+ * This example here is for the development board. Refer
+ * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
+ * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
+ * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
+ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
+ * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
+ */
+
+extern void eukrea_mbimxsd25_baseboard_init(void);
+extern void eukrea_mbimx27_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
+extern void eukrea_mbimx51_baseboard_init(void);
+extern void eukrea_mbimxsd51_baseboard_init(void);
+
+#endif
+
+#endif /* __MACH_EUKREA_BASEBOARDS_H__ */

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -0,0 +1,351 @@
+/*
+ * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+
+static const int eukrea_mbimx27_pins[] __initconst = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI4 */
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD | GPIO_PUEN,
+	PC18_PF_SSI4_TXD | GPIO_PUEN,
+	PC19_PF_SSI4_CLK,
+#endif
+};
+
+static const uint32_t eukrea_mbimx27_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+};
+
+static const struct matrix_keymap_data
+eukrea_mbimx27_keymap_data __initconst = {
+	.keymap         = eukrea_mbimx27_keymap,
+	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
+};
+
+static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+};
+
+static const struct gpio_led_platform_data
+		eukrea_mbimx27_gpio_led_info __initconst = {
+	.leds		= eukrea_mbimx27_gpio_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
+	},
+};
+
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void __maybe_unused ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+		return;
+	}
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info __maybe_unused
+		eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		/* irq number is run-time assigned */
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+
+static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
+	.dat3_card_detect = 1,
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
+	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc_pdata);
+
+	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+
+	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* ADS7846 Touchscreen controller init */
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	ads7846_dev_init();
+#endif
+
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
+
+	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
+
+	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
+}

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <video/platform_lcd.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "devices-imx25.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
+
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+	/* CAN */
+	MX25_PAD_GPIO_D__CAN2_RX,
+	MX25_PAD_GPIO_C__CAN2_TX,
+	/* SPI1 */
+	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX25_PAD_CSPI1_SS0__GPIO_1_16,
+	MX25_PAD_CSPI1_SS1__GPIO_1_17,
+	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX25_PAD_CSPI1_RDY__GPIO_2_22,
+};
+
+#define GPIO_LED1		IMX_GPIO_NR(3, 19)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
+#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
+#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+	{
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 7,
+			.left_margin	= 100,
+			.right_margin	= 100,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 100,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 7,
+			.left_margin	= 75,
+			.right_margin	= 75,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 75,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd_led_info __initconst = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_NONE,
+};
+
+static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd25_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd25_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+	imx25_add_imx_uart1(&uart_pdata);
+	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
+	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx25_add_flexcan1(NULL);
+	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
+}

arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <video/platform_lcd.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO-QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 32000,
+		.left_margin	= 100,
+		.right_margin	= 100,
+		.upper_margin	= 7,
+		.lower_margin	= 100,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-SVGA",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 25000,
+		.left_margin	= 75,
+		.right_margin	= 75,
+		.upper_margin	= 7,
+		.lower_margin	= 75,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "CMO-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	/* Backlight */
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD_PWR */
+	MX35_PAD_D3_CLS__GPIO1_4,
+	/* LED */
+	MX35_PAD_LD23__GPIO3_29,
+	/* SWITCH */
+	MX35_PAD_LD19__GPIO3_25,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* I2S */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1 CD */
+	MX35_PAD_LD18__GPIO3_24,
+	/* SPI */
+	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX35_PAD_CSPI1_SS0__GPIO1_18,
+	MX35_PAD_CSPI1_SS1__GPIO1_19,
+	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
+};
+
+#define GPIO_LED1	IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 18)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 19)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(3, 5)
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd_led_info __initconst = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_NONE,
+};
+
+static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd35_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx35 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd35_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+	imx35_add_imx_uart1(&uart_pdata);
+	imx35_add_ipu_core();
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx35_add_flexcan1(NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
+}

arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c

@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <video/platform_lcd.h>
+#include <linux/backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "devices-imx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
+
+static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
+	/* LED */
+	MX51_PAD_NANDF_D10__GPIO3_30,
+	/* SWITCH */
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	/* UART 3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+	/* SD */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	/* SSI */
+	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
+	/* LCD Backlight */
+	MX51_PAD_DI1_D1_CS__GPIO3_4,
+	/* LCD RST */
+	MX51_PAD_CSI1_D9__GPIO3_13,
+};
+
+#define GPIO_LED1	IMX_GPIO_NR(3, 30)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
+#define GPIO_LCDRST	IMX_GPIO_NR(3, 13)
+#define GPIO_LCDBL	IMX_GPIO_NR(3, 4)
+
+static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDRST, 1);
+	else
+		gpio_direction_output(GPIO_LCDRST, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd51_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd51_lcd_power_data,
+};
+
+static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_LCDBL, 1);
+	else
+		gpio_direction_output(GPIO_LCDBL, 0);
+}
+
+static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
+	.name			= "eukrea_mbimxsd51-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimxsd51_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimxsd51_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimxsd51_bl_info,
+	},
+};
+
+static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd51_led_info __initconst = {
+	.leds		= eukrea_mbimxsd51_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd51_leds),
+};
+
+static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd51_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd51_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static int screen_type;
+
+static int __init eukrea_mbimxsd51_screen_type(char *options)
+{
+	if (!strcmp(options, "dvi"))
+		screen_type = 1;
+	else if (!strcmp(options, "tft"))
+		screen_type = 0;
+
+	return 0;
+}
+__setup("screen_type=", eukrea_mbimxsd51_screen_type);
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx51sd init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd51_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
+			ARRAY_SIZE(eukrea_mbimxsd51_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
+
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+
+	imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDRST, "LCDRST");
+	gpio_direction_output(GPIO_LCDRST, 0);
+	gpio_request(GPIO_LCDBL, "LCDBL");
+	gpio_direction_output(GPIO_LCDBL, 0);
+	if (!screen_type) {
+		platform_device_register(&eukrea_mbimxsd51_bl_dev);
+		platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
+	} else {
+		gpio_free(GPIO_LCDRST);
+		gpio_free(GPIO_LCDBL);
+	}
+
+	i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
+
+	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
+}

arch/arm/mach-imx/gpc.c

@@ -0,0 +1,140 @@
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip/arm-gic.h>
+#include "common.h"
+
+#define GPC_IMR1		0x008
+#define GPC_PGC_CPU_PDN		0x2a0
+
+#define IMR_NUM			4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Tell GPC to power off ARM core when suspend */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+	}
+}
+
+void imx_gpc_post_resume(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Keep ARM core powered on for other low-power modes */
+	writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	unsigned int idx = d->irq / 32 - 1;
+	u32 mask;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return -EINVAL;
+
+	mask = 1 << d->irq % 32;
+	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+				  gpc_wake_irqs[idx] & ~mask;
+
+	return 0;
+}
+
+void imx_gpc_mask_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~0, reg_imr1 + i * 4);
+	}
+
+}
+
+void imx_gpc_restore_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val &= ~(1 << d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val |= 1 << (d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+	struct device_node *np;
+	int i;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	gpc_base = of_iomap(np, 0);
+	WARN_ON(!gpc_base);
+
+	/* Initially mask all interrupts */
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
+
+	/* Register GPC as the secondary interrupt controller behind GIC */
+	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}

arch/arm/mach-imx/hardware.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#define addr_in_module(addr, mod) \
+	((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+
+#define IMX_IO_P2V_MODULE(addr, module)					\
+	(((addr) - module ## _BASE_ADDR) < module ## _SIZE ?		\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
+
+/*
+ * This is rather complicated for humans and ugly to verify, but for a machine
+ * it's OK.  Still more as it is usually only applied to constants.  The upsides
+ * on using this approach are:
+ *
+ *  - same mapping on all i.MX machines
+ *  - works for assembler, too
+ *  - no need to nurture #defines for virtual addresses
+ *
+ * The downside it, it's hard to verify (but I have a script for that).
+ *
+ * Obviously this needs to be injective for each SoC.  In general it maps the
+ * whole address space to [0xf4000000, 0xf5ffffff].  So [0xf6000000,0xfeffffff]
+ * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
+ *
+ * It applies the following mappings for the different SoCs:
+ *
+ * mx1:
+ *	IO	0x00200000+0x100000	->	0xf4000000+0x100000
+ * mx21:
+ *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf5000000+0x100000
+ *	X_MEMC	0xdf000000+0x004000	->	0xf5f00000+0x004000
+ * mx25:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ * mx27:
+ *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf5000000+0x100000
+ *	X_MEMC	0xd8000000+0x100000	->	0xf5c00000+0x100000
+ * mx31:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ * mx35:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ * mx51:
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
+ *	DEBUG	0x60000000+0x100000	->	0xf5000000+0x100000
+ *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x83f00000+0x100000	->	0xf5300000+0x100000
+ * mx53:
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	DEBUG	0x40000000+0x100000	->	0xf5000000+0x100000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
+ * mx6q:
+ *	SCU	0x00a00000+0x004000	->	0xf4000000+0x004000
+ *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
+ *	ANATOP	0x020c8000+0x004000	->	0xf42c8000+0x004000
+ *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
+ */
+#define IMX_IO_P2V(x)	(						\
+			(((x) & 0x80000000) >> 7) |			\
+			(0xf4000000 +					\
+			(((x) & 0x50000000) >> 6) +			\
+			(((x) & 0x0b000000) >> 4) +			\
+			(((x) & 0x000fffff))))
+
+#define IMX_IO_ADDRESS(x)	IOMEM(IMX_IO_P2V(x))
+
+#include "mxc.h"
+
+#include "mx51.h"
+#include "mx53.h"
+#include "mx3x.h"
+#include "mx31.h"
+#include "mx35.h"
+#include "mx2x.h"
+#include "mx21.h"
+#include "mx27.h"
+#include "mx1.h"
+#include "mx25.h"
+
+#define imx_map_entry(soc, name, _type)	{				\
+	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
+	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
+	.length = soc ## _ ## name ## _SIZE,				\
+	.type = _type,							\
+}
+
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */

arch/arm/mach-imx/headsmp.S

@@ -0,0 +1,71 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+	.section ".text.head", "ax"
+
+#ifdef CONFIG_SMP
+diag_reg_offset:
+	.word	g_diag_reg - .
+
+	.macro	set_diag_reg
+	adr	r0, diag_reg_offset
+	ldr	r1, [r0]
+	add	r1, r1, r0		@ r1 = physical &g_diag_reg
+	ldr	r0, [r1]
+	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
+	.endm
+
+ENTRY(v7_secondary_startup)
+	bl	v7_invalidate_l1
+	set_diag_reg
+	b	secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+#ifdef CONFIG_ARM_CPU_SUSPEND
+/*
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
+ */
+
+#ifdef CONFIG_CACHE_L2X0
+	.macro	pl310_resume
+	adr	r0, l2x0_saved_regs_offset
+	ldr	r2, [r0]
+	add	r2, r2, r0
+	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
+	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
+	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
+	mov	r1, #0x1
+	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
+	.endm
+
+l2x0_saved_regs_offset:
+	.word	l2x0_saved_regs - .
+
+#else
+	.macro	pl310_resume
+	.endm
+#endif
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+	pl310_resume
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
+#endif

arch/arm/mach-imx/hotplug.c

@@ -0,0 +1,68 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <asm/cp15.h>
+#include <asm/proc-fns.h>
+
+#include "common.h"
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void imx_cpu_die(unsigned int cpu)
+{
+	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
+	cpu_do_idle();
+}
+
+int imx_cpu_kill(unsigned int cpu)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
+	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
+	return 1;
+}

arch/arm/mach-imx/iim.h

@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT             0x0000
+#define MXC_IIMSTATM            0x0004
+#define MXC_IIMERR              0x0008
+#define MXC_IIMEMASK            0x000C
+#define MXC_IIMFCTL             0x0010
+#define MXC_IIMUA               0x0014
+#define MXC_IIMLA               0x0018
+#define MXC_IIMSDAT             0x001C
+#define MXC_IIMPREV             0x0020
+#define MXC_IIMSREV             0x0024
+#define MXC_IIMPRG_P            0x0028
+#define MXC_IIMSCS0             0x002C
+#define MXC_IIMSCS1             0x0030
+#define MXC_IIMSCS2             0x0034
+#define MXC_IIMSCS3             0x0038
+#define MXC_IIMFBAC0            0x0800
+#define MXC_IIMJAC              0x0804
+#define MXC_IIMHWV1             0x0808
+#define MXC_IIMHWV2             0x080C
+#define MXC_IIMHAB0             0x0810
+#define MXC_IIMHAB1             0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC              0x0814
+#define MXC_IIMPREV_FUSE        0x0818
+#define MXC_IIMSREV_FUSE        0x081C
+#define MXC_IIMSJC_CHALL_0      0x0820
+#define MXC_IIMSJC_CHALL_7      0x083C
+#define MXC_IIMFB0UC17          0x0840
+#define MXC_IIMFB0UC255         0x0BFC
+#define MXC_IIMFBAC1            0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID             0x0C04
+#define MXC_IIMKEY0             0x0C04
+#define MXC_IIMKEY20            0x0C54
+#define MXC_IIMSJC_RESP_0       0x0C58
+#define MXC_IIMSJC_RESP_7       0x0C74
+#define MXC_IIMFB1UC30          0x0C78
+#define MXC_IIMFB1UC255         0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN          (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN          (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT            (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE         (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE      (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS        (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA             (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM             (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */

arch/arm/mach-imx/imx25-dt.c

@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include "common.h"
+#include "mx25.h"
+
+static void __init imx25_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const imx25_dt_board_compat[] __initconst = {
+	"fsl,imx25",
+	NULL
+};
+
+static void __init imx25_timer_init(void)
+{
+	mx25_clocks_init_dt();
+}
+
+DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
+	.map_io		= mx25_map_io,
+	.init_early	= imx25_init_early,
+	.init_irq	= mx25_init_irq,
+	.handle_irq	= imx25_handle_irq,
+	.init_time	= imx25_timer_init,
+	.init_machine	= imx25_dt_init,
+	.dt_compat	= imx25_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/imx27-dt.c

@@ -0,0 +1,49 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "mx27.h"
+
+static void __init imx27_dt_init(void)
+{
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	platform_device_register_full(&devinfo);
+}
+
+static const char * const imx27_dt_board_compat[] __initconst = {
+	"fsl,imx27",
+	NULL
+};
+
+static void __init imx27_timer_init(void)
+{
+	mx27_clocks_init_dt();
+}
+
+DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
+	.map_io		= mx27_map_io,
+	.init_early	= imx27_init_early,
+	.init_irq	= mx27_init_irq,
+	.handle_irq	= imx27_handle_irq,
+	.init_time	= imx27_timer_init,
+	.init_machine	= imx27_dt_init,
+	.dt_compat	= imx27_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/imx31-dt.c

@@ -0,0 +1,45 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "mx31.h"
+
+static void __init imx31_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *imx31_dt_board_compat[] __initdata = {
+	"fsl,imx31",
+	NULL
+};
+
+static void __init imx31_dt_timer_init(void)
+{
+	mx31_clocks_init_dt();
+}
+
+DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
+	.map_io		= mx31_map_io,
+	.init_early	= imx31_init_early,
+	.init_irq	= mx31_init_irq,
+	.handle_irq	= imx31_handle_irq,
+	.init_time	= imx31_dt_timer_init,
+	.init_machine	= imx31_dt_init,
+	.dt_compat	= imx31_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/imx51-dt.c

@@ -0,0 +1,50 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "mx51.h"
+
+static void __init imx51_dt_init(void)
+{
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_full(&devinfo);
+}
+
+static const char *imx51_dt_board_compat[] __initdata = {
+	"fsl,imx51",
+	NULL
+};
+
+static void __init imx51_timer_init(void)
+{
+	mx51_clocks_init_dt();
+}
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+	.map_io		= mx51_map_io,
+	.init_early	= imx51_init_early,
+	.init_irq	= mx51_init_irq,
+	.handle_irq	= imx51_handle_irq,
+	.init_time	= imx51_timer_init,
+	.init_machine	= imx51_dt_init,
+	.init_late	= imx51_init_late,
+	.dt_compat	= imx51_dt_board_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/iomux-imx31.c

@@ -0,0 +1,181 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include "hardware.h"
+#include "iomux-mx3.h"
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
+#define IOMUXGPR	(IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+	u32 field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+	field = pin_mode & 0x3;
+	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 field, l;
+	void __iomem *reg;
+
+	pin &= IOMUX_PADNUM_MASK;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	const unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(unsigned int pin)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
+{
+	const unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+	u32 l;
+
+	spin_lock(&gpio_mux_lock);
+	l = __raw_readl(IOMUXGPR);
+	if (en)
+		l |= gp;
+	else
+		l &= ~gp;
+
+	__raw_writel(l, IOMUXGPR);
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);