Initial commit; kernel source import

Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt

@@ -0,0 +1,17 @@
+Allwinner A1X SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
+
+Example:
+
+timer {
+	compatible = "allwinner,sun4i-timer";
+	reg = <0x01c20c00 0x400>;
+	interrupts = <22>;
+	clocks = <&osc>;
+};

Documentation/devicetree/bindings/timer/arm,sp804.txt

@@ -0,0 +1,29 @@
+ARM sp804 Dual Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "arm,sp804" & "arm,primecell"
+- interrupts: Should contain the list of Dual Timer interrupts. This is the
+	interrupt for timer 1 and timer 2. In the case of a single entry, it is
+	the combined interrupt or if "arm,sp804-has-irq" is present that
+	specifies which timer interrupt is connected.
+- reg: Should contain location and length for dual timer register.
+- clocks: clocks driving the dual timer hardware. This list should be 1 or 3
+	clocks.	With 3 clocks, the order is timer0 clock, timer1 clock,
+	apb_pclk. A single clock can also be specified if the same clock is
+	used for all clock inputs.
+
+Optional properties:
+- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
+	specifies if the irq connection is for timer 1 or timer 2. A value of 1
+	or 2 should be used.
+
+Example:
+
+	timer0: timer@fc800000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0xfc800000 0x1000>;
+		interrupts = <0 0 4>, <0 1 4>;
+		clocks = <&timclk1 &timclk2 &pclk>;
+		clock-names = "timer1", "timer2", "apb_pclk";
+	};

Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt

@@ -0,0 +1,22 @@
+BCM2835 System Timer
+
+The System Timer peripheral provides four 32-bit timer channels and a
+single 64-bit free running counter. Each channel has an output compare
+register, which is compared against the 32 least significant bits of the
+free running counter values, and generates an interrupt.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-system-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupt sinks; one per timer channel.
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "brcm,bcm2835-system-timer";
+	reg = <0x7e003000 0x1000>;
+	interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+	clock-frequency = <1000000>;
+};

Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt

@@ -0,0 +1,17 @@
+Cadence TTC - Triple Timer Counter
+
+Required properties:
+- compatible : Should be "cdns,ttc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 3 interrupts; one per timer channel.
+- clocks: phandle to the source clock
+
+Example:
+
+ttc0: ttc0@f8001000 {
+	interrupt-parent = <&intc>;
+	interrupts = < 0 10 4 0 11 4 0 12 4 >;
+	compatible = "cdns,ttc";
+	reg = <0xF8001000 0x1000>;
+	clocks = <&cpu_clk 3>;
+};

Documentation/devicetree/bindings/timer/fsl,imxgpt.txt

@@ -0,0 +1,18 @@
+Freescale i.MX General Purpose Timer (GPT)
+
+Required properties:
+
+- compatible : should be "fsl,<soc>-gpt"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one per timer channel.
+- clocks : The clocks provided by the SoC to drive the timer.
+
+Example:
+
+gpt1: timer@10003000 {
+	compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+	reg = <0x10003000 0x1000>;
+	interrupts = <26>;
+	clocks = <&clks 46>, <&clks 61>;
+	clock-names = "ipg", "per";
+};

Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt

@@ -0,0 +1,15 @@
+Marvell Armada 370 and Armada XP Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,armada-370-xp-timer"
+- interrupts: Should contain the list of Global Timer interrupts and
+  then local timer interrupts
+- reg: Should contain location and length for timers register. First
+  pair for the Global Timer registers, second pair for the
+  local/private timers.
+- clocks: clock driving the timer hardware
+
+Optional properties:
+- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
+  Mhz fixed mode (available on Armada XP and not on Armada 370)

Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt

@@ -0,0 +1,21 @@
+NVIDIA Tegra20 timer
+
+The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+running counter. The first two channels may also trigger a watchdog reset.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra20-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one per timer channel.
+
+Example:
+
+timer {
+	compatible = "nvidia,tegra20-timer";
+	reg = <0x60005000 0x60>;
+	interrupts = <0 0 0x04
+			0 1 0x04
+			0 41 0x04
+			0 42 0x04>;
+};

Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt

@@ -0,0 +1,24 @@
+NVIDIA Tegra30 timer
+
+The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+running counter, and 5 watchdog modules. The first two channels may also
+trigger a legacy watchdog reset.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 6 interrupts; one per each of timer channels 1
+    through 5, and one for the shared interrupt for the remaining channels.
+- nvidia,pmc : phandle to the PMC syscon node.
+
+timer {
+	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+	reg = <0x60005000 0x400>;
+	interrupts = <0 0 0x04
+		      0 1 0x04
+		      0 41 0x04
+		      0 42 0x04
+		      0 121 0x04
+		      0 122 0x04>;
+};

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

@@ -0,0 +1,68 @@
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};