Initial commit; kernel source import

Documentation/devicetree/bindings/serial/altera_jtaguart.txt

@@ -0,0 +1,4 @@
+Altera JTAG UART
+
+Required properties:
+- compatible : should be "ALTR,juart-1.0"

Documentation/devicetree/bindings/serial/altera_uart.txt

@@ -0,0 +1,7 @@
+Altera UART
+
+Required properties:
+- compatible : should be "ALTR,uart-1.0"
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART

Documentation/devicetree/bindings/serial/cavium-uart.txt

@@ -0,0 +1,19 @@
+* Universal Asynchronous Receiver/Transmitter (UART)
+
+- compatible: "cavium,octeon-3860-uart"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the UART register bank.
+
+- interrupts: A single interrupt specifier.
+
+- current-speed: Optional, the current bit rate in bits per second.
+
+Example:
+	uart1: serial@1180000000c00 {
+		compatible = "cavium,octeon-3860-uart","ns16550";
+		reg = <0x11800 0x00000c00 0x0 0x400>;
+		current-speed = <115200>;
+		interrupts = <0 35>;
+	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -0,0 +1,35 @@
+* Freescale i.MX UART controller
+
+Required properties:
+- compatible : should be "fsl,imx21-uart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain UART interrupt number
+
+Optional properties:
+- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used
+
+Note: Each uart controller should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+
+- From imx51.dtsi:
+aliases {
+	serial0 = &uart1;
+	serial1 = &uart2;
+	serial2 = &uart3;
+};
+
+uart1: serial@73fbc000 {
+	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+	reg = <0x73fbc000 0x4000>;
+	interrupts = <31>;
+	status = "disabled";
+}
+
+- From imx51-babbage.dts:
+uart1: serial@73fbc000 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+

Documentation/devicetree/bindings/serial/lantiq_asc.txt

@@ -0,0 +1,16 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Example:
+
+asc1: serial@E100C00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};

Documentation/devicetree/bindings/serial/mrvl-serial.txt

@@ -0,0 +1,4 @@
+PXA UART controller
+
+Required properties:
+- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".

Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt

@@ -0,0 +1,24 @@
+NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver.
+
+Required properties:
+- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for this UART controller.
+
+Optional properties:
+- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
+		only if all 8 lines of UART controller are pinmuxed.
+
+Example:
+
+serial@70006000 {
+	compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart";
+	reg = <0x70006000 0x40>;
+	reg-shift = <2>;
+	interrupts = <0 36 0x04>;
+	nvidia,dma-request-selector = <&apbdma 8>;
+	nvidia,enable-modem-interrupt;
+	status = "disabled";
+};

Documentation/devicetree/bindings/serial/omap_serial.txt

@@ -0,0 +1,10 @@
+OMAP UART controller
+
+Required properties:
+- compatible : should be "ti,omap2-uart" for OMAP2 controllers
+- compatible : should be "ti,omap3-uart" for OMAP3 controllers
+- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART

Documentation/devicetree/bindings/serial/pl011.txt

@@ -0,0 +1,17 @@
+* ARM AMBA Primecell PL011 serial UART
+
+Required properties:
+- compatible: must be "arm,primecell", "arm,pl011"
+- reg: exactly one register range with length 0x1000
+- interrupts: exactly one interrupt specifier
+
+Optional properties:
+- pinctrl: When present, must have one state named "sleep"
+	   and one state named "default"
+- clocks:  When present, must refer to exactly one clock named
+	   "apb_pclk"
+- dmas:	   When present, may have one or two dma channels.
+	   The first one must be named "rx", the second one
+	   must be named "tx".
+
+See also bindings/arm/primecell.txt

Documentation/devicetree/bindings/serial/rs485.txt

@@ -0,0 +1,31 @@
+* RS485 serial communications
+
+The RTS signal is capable of automatically controlling line direction for
+the built-in half-duplex mode.
+The properties described hereafter shall be given to a half-duplex capable
+UART node.
+
+Required properties:
+- rs485-rts-delay: prop-encoded-array <a b> where:
+  * a is the delay beteween rts signal and beginning of data sent in milliseconds.
+      it corresponds to the delay before sending data.
+  * b is the delay between end of data sent and rts signal in milliseconds
+      it corresponds to the delay after sending data and actual release of the line.
+
+Optional properties:
+- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
+  feature at boot time. It can be disabled later with proper ioctl.
+- rs485-rx-during-tx: empty property that enables the receiving of data even
+  whilst sending data.
+
+RS485 example for Atmel USART:
+	usart0: serial@fff8c000 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0xfff8c000 0x4000>;
+		interrupts = <7>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-delay = <0 200>;		// in milliseconds
+	};
+

Documentation/devicetree/bindings/serial/samsung_uart.txt

@@ -0,0 +1,14 @@
+* Samsung's UART Controller
+
+The Samsung's UART controller is used for interfacing SoC with serial communicaion
+devices.
+
+Required properties:
+- compatible: should be
+  - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
+
+- reg: base physical address of the controller and length of memory mapped
+  region.
+
+- interrupts: interrupt number to the cpu. The interrupt specifier format depends
+  on the interrupt controller parent.