Initial commit; kernel source import

Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt

@@ -0,0 +1,15 @@
+Atmel AT91RM9200 Real Time Clock
+
+Required properties:
+- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm/event interrupt
+
+Example:
+
+rtc@fffffe00 {
+	compatible = "atmel,at91rm9200-rtc";
+	reg = <0xfffffe00 0x100>;
+	interrupts = <1 4 7>;
+};

Documentation/devicetree/bindings/rtc/dw-apb.txt

@@ -0,0 +1,25 @@
+* Designware APB timer
+
+Required properties:
+- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the timer.
+- clock-frequency: The frequency in HZ of the timer.
+- clock-freq: For backwards compatibility with picoxcell
+
+Example:
+
+		timer1: timer@ffc09000 {
+				compatible = "snps,dw-apb-timer-sp";
+				interrupts = <0 168 4>;
+				clock-frequency = <200000000>;
+				reg = <0xffc09000 0x1000>;
+			};
+
+		timer2: timer@ffd00000 {
+				compatible = "snps,dw-apb-timer-osc";
+				interrupts = <0 169 4>;
+				clock-frequency = <200000000>;
+				reg = <0xffd00000 0x1000>;
+			};

Documentation/devicetree/bindings/rtc/imxdi-rtc.txt

@@ -0,0 +1,17 @@
+* i.MX25 Real Time Clock controller
+
+This binding supports the following chips: i.MX25, i.MX53
+
+Required properties:
+- compatible: should be: "fsl,imx25-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};

Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt

@@ -0,0 +1,15 @@
+* NXP LPC32xx SoC Real Time Clock controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The RTC interrupt
+
+Example:
+
+	rtc@40024000 {
+		compatible = "nxp,lpc3220-rtc";
+		reg = <0x40024000 0x1000>;
+		interrupts = <52 0>;
+	};

Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt

@@ -0,0 +1,19 @@
+NVIDIA Tegra20 real-time clock
+
+The Tegra RTC maintains seconds and milliseconds counters, and five alarm
+registers. The alarms and other interrupts may wake the system from low-power
+state.
+
+Required properties:
+
+- compatible : should be "nvidia,tegra20-rtc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A single interrupt specifier.
+
+Example:
+
+timer {
+	compatible = "nvidia,tegra20-rtc";
+	reg = <0x7000e000 0x100>;
+	interrupts = <0 2 0x04>;
+};

Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt

@@ -0,0 +1,5 @@
+OLPC XO-1 RTC
+~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "olpc,xo1-rtc"

Documentation/devicetree/bindings/rtc/orion-rtc.txt

@@ -0,0 +1,18 @@
+* Mvebu Real Time Clock
+
+RTC controller for the Kirkwood, the Dove, the Armada 370 and the
+Armada XP SoCs
+
+Required properties:
+- compatible : Should be "marvell,orion-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@10300 {
+        compatible = "marvell,orion-rtc";
+        reg = <0xd0010300 0x20>;
+        interrupts = <50>;
+};

Documentation/devicetree/bindings/rtc/pxa-rtc.txt

@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+	compatible = "marvell,pxa-rtc";
+	reg = <0x40900000 0x3c>;
+	interrupts = <30 31>;
+};

Documentation/devicetree/bindings/rtc/rtc-cmos.txt

@@ -0,0 +1,28 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Regsiter A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };

Documentation/devicetree/bindings/rtc/rtc-omap.txt

@@ -0,0 +1,17 @@
+TI Real Time Clock
+
+Required properties:
+- compatible: "ti,da830-rtc"
+- reg: Address range of rtc register set
+- interrupts: rtc timer, alarm interrupts in order
+- interrupt-parent: phandle for the interrupt controller
+
+Example:
+
+rtc@1c23000 {
+	compatible = "ti,da830-rtc";
+	reg = <0x23000 0x1000>;
+	interrupts = <19
+		      19>;
+	interrupt-parent = <&intc>;
+};

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -0,0 +1,20 @@
+* Samsung's S3C Real Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+    * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+  interrupt number is the rtc alarm interrupt and second interrupt number
+  is the rtc tick interrupt. The number of cells representing a interrupt
+  depends on the parent interrupt controller.
+
+Example:
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <44 0 45 0>;
+	};

Documentation/devicetree/bindings/rtc/sa1100-rtc.txt

@@ -0,0 +1,17 @@
+* Marvell Real Time Clock controller
+
+Required properties:
+- compatible: should be "mrvl,sa1100-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Should be two. The first interrupt number is the rtc alarm
+  interrupt and the second interrupt number is the rtc hz interrupt.
+- interrupt-names: Assign name of irq resource.
+
+Example:
+	rtc: rtc@d4010000 {
+		compatible = "mrvl,mmp-rtc";
+		reg = <0xd4010000 0x1000>;
+		interrupts = <5>, <6>;
+		interrupt-name = "rtc 1Hz", "rtc alarm";
+	};

Documentation/devicetree/bindings/rtc/snvs-rtc.txt

@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details.

Documentation/devicetree/bindings/rtc/spear-rtc.txt

@@ -0,0 +1,17 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear600-rtc"
+- reg : Address range of the rtc registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+	rtc@fc000000 {
+		compatible = "st,spear600-rtc";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+	};

Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};

Documentation/devicetree/bindings/rtc/twl-rtc.txt

@@ -0,0 +1,12 @@
+* TI twl RTC
+
+The TWL family (twl4030/6030) contains a RTC.
+
+Required properties:
+- compatible : Should be twl4030-rtc
+
+Examples:
+
+rtc@0 {
+    compatible = "ti,twl4030-rtc";
+};

Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt

@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+	rtc@d8100000 {
+		compatible = "via,vt8500-rtc";
+		reg = <0xd8100000 0x10000>;
+		interrupts = <48>;
+	};