Initial commit; kernel source import

Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt

@@ -0,0 +1,16 @@
+=== AB8500 Battery Temperature Monitor Driver ===
+
+The properties below describes the node for btemp driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-btemp"
+- battery = Shall be battery specific information
+
+	Example:
+	ab8500_btemp {
+		compatible = "stericsson,ab8500-btemp";
+		battery	   = <&ab8500_battery>;
+	};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt

@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+	compatible = "stericsson,ab8500-chargalg";
+	battery	   = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

Documentation/devicetree/bindings/power_supply/ab8500/charger.txt

@@ -0,0 +1,25 @@
+=== AB8500 Charger Driver ===
+
+Required Properties:
+- compatible = Shall be "stericsson,ab8500-charger"
+- battery = Shall be battery specific information
+	Example:
+	ab8500_charger {
+		compatible = "stericsson,ab8500-charger";
+		battery	   = <&ab8500_battery>;
+	};
+
+- vddadc-supply: Supply for USB and Main charger
+	Example:
+	ab8500-charger {
+		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+	}
+- autopower_cfg:
+	Boolean value depicting the presence of 'automatic poweron after powerloss'
+	Example:
+	ab8500-charger {
+		autopower_cfg;
+	};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

@@ -0,0 +1,58 @@
+=== AB8500 Fuel Gauge Driver ===
+
+AB8500 is a mixed signal multimedia and power management
+device comprising: power and energy-management-module,
+wall-charger, usb-charger, audio codec, general purpose adc,
+tvout, clock management and sim card interface.
+
+Fuelgauge support is part of energy-management-modules, other
+components of this module are:
+main-charger, usb-combo-charger and battery-temperature-monitoring.
+
+The properties below describes the node for fuelgauge driver.
+
+Required Properties:
+- compatible = This shall be: "stericsson,ab8500-fg"
+- battery = Shall be battery specific information
+	Example:
+	ab8500_fg {
+		compatible = "stericsson,ab8500-fg";
+		battery	   = <&ab8500_battery>;
+	};
+
+dependent node:
+	ab8500_battery: ab8500_battery {
+	};
+	This node will provide information on 'thermistor interface' and
+	'battery technology type' used.
+
+Properties of this node are:
+thermistor-on-batctrl:
+	A boolean value indicating thermistor interface	to battery
+
+	Note:
+	'btemp' and 'batctrl' are the pins interfaced for battery temperature
+	measurement, 'btemp' signal is used when NTC(negative temperature
+	coefficient) resister is interfaced external to battery whereas
+	'batctrl' pin is used when NTC resister is internal to battery.
+
+	Example:
+	ab8500_battery: ab8500_battery {
+		thermistor-on-batctrl;
+	};
+	indicates: NTC resister is internal to battery, 'batctrl' is used
+		for thermal measurement.
+
+	The absence of property 'thermal-on-batctrl' indicates
+	NTC resister is external to battery and  'btemp' signal is used
+	for thermal measurement.
+
+battery-type:
+	This shall be the battery manufacturing technology type,
+	allowed types are:
+		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+	Example:
+	ab8500_battery: ab8500_battery {
+		stericsson,battery-type = "LIPO";
+	}
+

Documentation/devicetree/bindings/power_supply/max17042_battery.txt

@@ -0,0 +1,18 @@
+max17042_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17042"
+
+Optional properties :
+ - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
+                         (datasheet-recommended value is 10000).
+   Defining this property enables current-sense functionality.
+
+Example:
+
+	battery-charger@36 {
+		compatible = "maxim,max17042";
+		reg = <0x36>;
+		maxim,rsns-microohm = <10000>;
+	};

Documentation/devicetree/bindings/power_supply/max8925_batter.txt

@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+	charger {
+		batt-detect = <0>;
+		topoff-threshold = <1>;
+		fast-charge = <7>;
+		no-temp-support = <0>;
+		no-insert-detect = <0>;
+	};

Documentation/devicetree/bindings/power_supply/olpc_battery.txt

@@ -0,0 +1,5 @@
+OLPC battery
+~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "olpc,xo1-battery"

Documentation/devicetree/bindings/power_supply/power_supply.txt

@@ -0,0 +1,23 @@
+Power Supply Core Support
+
+Optional Properties:
+ - power-supplies : This property is added to a supply in order to list the
+   devices which supply it power, referenced by their phandles.
+
+Example:
+
+	usb-charger: power@e {
+		compatible = "some,usb-charger";
+		...
+	};
+
+	ac-charger: power@c {
+		compatible = "some,ac-charger";
+		...
+	};
+
+	battery@b {
+		compatible = "some,battery";
+		...
+		power-supplies = <&usb-charger>, <&ac-charger>;
+	};

Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt

@@ -0,0 +1,13 @@
+* QNAP Power Off
+
+QNAP NAS devices have a microcontroller controlling the main power
+supply. This microcontroller is connected to UART1 of the Kirkwood and
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
+microcontroller to turn the power off. This driver adds a handler to
+pm_power_off which is called to turn the power off.
+
+Required Properties:
+- compatible: Should be "qnap,power-off"
+
+- reg: Address and length of the register set for UART1
+- clocks: tclk clock

Documentation/devicetree/bindings/power_supply/restart-poweroff.txt

@@ -0,0 +1,8 @@
+* Restart Power Off
+
+Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off
+by restarting and letting u-boot keep hold of the machine until the
+user presses a button.
+
+Required Properties:
+- compatible: Should be "restart-poweroff"

Documentation/devicetree/bindings/power_supply/sbs_sbs-battery.txt

@@ -0,0 +1,23 @@
+SBS sbs-battery
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-battery"
+
+Optional properties :
+ - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
+   IO failure.
+ - sbs,poll-retry-count : The number of times to try looking for new status
+   after an external change notification.
+ - sbs,battery-detect-gpios : The gpio which signals battery detection and
+   a flag specifying its polarity.
+
+Example:
+
+	bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = < 0xb >;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <10>;
+		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+	}

Documentation/devicetree/bindings/power_supply/ti,bq24735.txt

@@ -0,0 +1,35 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+   adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+   presence.
+ - ti,charge-current : Used to control and set the charging current. This value
+   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
+   about the ChargeCurrent (0x14h) register.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
+   about the ChargeVoltage (0x15h) register.
+ - ti,input-current : Used to control and set the charger input current. This
+   value must be between 128mA and 8.064A with a 128mA step resolution. The
+   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
+   more information about the InputCurrent (0x3fh) register.
+ - ti,external-control : Indicates that the charger is configured externally
+   and that the host should not attempt to enable/disable charging or set the
+   charge voltage/current.
+
+Example:
+
+	bq24735@9 {
+		compatible = "ti,bq24735";
+		reg = <0x9>;
+		ti,ac-detect-gpios = <&gpio 72 0x1>;
+		ti,external-control;
+	}

Documentation/devicetree/bindings/power_supply/tps65090.txt

@@ -0,0 +1,17 @@
+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+	tps65090-charger {
+		compatible = "ti,tps65090-charger";
+		ti,enable-low-current-chrg;
+	};